TSMP58000
www.vishay.com Vishay Semiconductors
Rev. 1.3, 12-Apr-18 1Document Number: 82485
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IR Sensor Module for Remote Control Systems
DESIGN SUPPORT TOOLS
MECHANICAL DATA
Pinning:
1 = carrier OUT, 2 = GND, 3 = VS
FEATURES
• Photo detector and preamplifier in one package
• AC coupled response from 20 kHz to 60 kHz, all
data formats
• Improved shielding against electrical field
disturbance
• TTL and CMOS compatibility
• Output active low
• Supply voltage 2.5 V to 5.5 V, typically the device
works in the range between 2.0 V and 5.5 V
• Carrier out signal for code learning functions
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
The TSMP58000 is a miniaturized sensor for receiving the
modulated signal of infrared remote control systems. A PIN
diode and preamplifier are assembled on a lead frame, the
epoxy package is designed as an IR filter. The modulated
output signal, carrier out, can be used for code learning
applications.
This component has not been qualified according to
automotive specifications.
BLOCK DIAGRAM APPLICATION CIRCUIT
19026
click logo to get started
Available
Models
PARTS TABLE
Carrier frequency 20 kHz to 60 kHz TSMP58000
Package Minicast
Pinning 1 = carrier OUT, 2 = GND, 3 = VS
Dimensions (mm) 5.0 W x 6.95 H x 4.8 D
Mounting Leaded
Application Code learning
TIA Amp Signal shaping
1 Carrier out
19746
2 GND
3 VS
C1=
4.7 µF
TSMPxxxx
OUT
GND
Circuit
µC
R
1
= 100 Ω
+ VS
GND
Transmitte r
with
TSALxxxx
VS
V
O
R
2
=
4.7 kΩ
R1 + C1 recommended to suppress power supply
disturbances.
R2 recommended to get faster slopes and a correct
high level of the output pulses.
TSMP58000
www.vishay.com Vishay Semiconductors
Rev. 1.3, 12-Apr-18 2Document Number: 82485
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating conditions for extended periods may affect the device reliability
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 1 - Testsignal
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Supply voltage (pin 3) VS-0.3 to +6 V
Output voltage (pin 1) VO-0.3 to (VS + 0.3) V
Output current (pin 1) IO5mA
Junction temperature Tj100 °C
Storage temperature range Tstg -25 to +85 °C
Operating temperature range Tamb -25 to +85 °C
Soldering temperature t ≤ 10 s, 1 mm from case Tsd 260 °C
ELECTRICAL AND OPTICAL CHARACTERISTICS CARRIER OUT
(Tamb = 25 °C, unless otherwise specified, VS = 3 V)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Supply current (pin 3) Ev = 0 ISD 0.55 0.7 0.9 mA
Supply voltage VS2.5 5.5 V
Transmission distance
Ev = 0, test signal see fig. 1,
IR diode TSAL6200,
IF = 400 mA
d5m
Output voltage low (pin 1) IOSL = 0.5 mA, test signal see fig. 1 VOSL 250 mV
Minimum irradiance VS = 3 V, (20 kHz to 60 kHz) Ee min. 12 25 mW/m2
Maximum irradiance test signal see fig. 1, (20 kHz to 60 kHz) Ee max. 50 80 W/m2
Directivity Angle of half transmission distance ϕ1/2 ± 45 deg
Output accuracy
fC = 20 kHz to 60 kHz,
Ee = 25 mW/m2 to 50 W/m2,
testsignal see fig. 1, BER ≤ 2%
N
carrier
pulses
input burst
length
- 1 cycle
input burst
length
input burst
length
+ 1 cycle
counts
Carrier cycle
(26.3 μs in case of 38 kHz)
Delay time td
Optical burst
(input signal)
Output voltage
TSMP58000
www.vishay.com Vishay Semiconductors
Rev. 1.3, 12-Apr-18 3Document Number: 82485
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 2 - Relative Spectral Sensitivity vs. Wavelength
Fig. 3 - Horizontal Directivity
Fig. 4 - Vertical Directivity
750 850 950 1050
0
0.2
0.4
0.6
0.8
1.2
S (λ)
rel
- Relative Spectral Sensitivity
λ - Wavelength (nm)
1150
94 8408
1.0
19258
0.4 0.2 00.6
0.9
0°
30°
10° 20°
40°
50°
60°
70°
80°
1.0
0.8
0.7
drel - Relative Transmission Distance
19259
0.4 0.2 00.6
0.9
0°
30°
10° 20°
40°
50°
60°
70°
80°
1.0
0.8
0.7
drel - Relative Transmission Distance
TSMP58000
www.vishay.com Vishay Semiconductors
Rev. 1.3, 12-Apr-18 4Document Number: 82485
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS in millimeters
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
TSMP58000