SA5V0(C)A - SA170(C)A Transient Voltage Suppressors SA5V0(C)A - SA170(C)A Features * * * * * * Glass passivated junction. 500W Peak Pulse Power capability on 10/1000 s waveform. Excellent clamping capability. Low incremental surge resistance. Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. Typical IR less than 1.0 A above 10V. DO-15 COLOR BAND DENOTES CATHODE ON UNIDIRECTIONAL DEVICES ONLY. NO COLOR BAND ON BIDIRECTIONAL DEVICES. DEVICES FOR BIPOLAR APPLICATIONS - Bidirectional types use CA suffix. - Electrical Characteristics apply in both directions. 500 Watt Transient Voltage Suppressors Absolute Maximum Ratings* Symbol TA = 25C unless otherwise noted Parameter PPPM Peak Pulse Power Dissipation on 10/1000 s waveform IPPM Peak Pulse Current on 10/1000 s waveform PD Tstg Power Dissipation .375 " lead length @ TA = 75C Non-repetitive Peak Forward Surge Current superimposed on rated load (JEDEC method) Storage Temperature Range TJ Operating Junction Temperature IFSM (Note 1) Value Units 500 W see table A 1.0 W 70 A -65 to +175 C + 175 C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Note 1: Measured on 8.3 ms single half-sine wave or equivalent square wave; Duty cycle = 4 pulses per minute maximum. 2002 Fairchild Semiconductor Corporation SA5V0(C)A - SA170(C)A, Rev. D (continued) Electrical Characteristics Uni-directional Bi-directional (C) Device Reverse Stand-off Voltage VRWM (V) SA5V0(C)A SA6V0(C)A SA6V5(C)A SA7V0(C)A SA7V5(C)A SA8V0(C)A SA8V5(C)A SA9V0(C)A SA10(C)A SA11(C)A SA12(C)A SA13(C)A SA14(C)A SA15(C)A SA16(C)A SA17(C)A SA18(C)A SA20(C)A SA22(C)A SA24(C)A SA26(C)A SA28(C)A SA30(C)A SA33(C)A SA36(C)A SA40(C)A SA43(C)A SA45(C)A SA48(C)A SA51(C)A SA54(C)A SA58(C)A SA60(C)A SA64(C)A SA70(C)A SA75(C)A SA78(C)A SA85(C)A SA90(C)A SA100(C)A SA110(C)A SA120(C)A SA130(C)A SA150(C)A SA160(C)A SA170(C)A 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 TA = 25C unless otherwise noted Breakdown Voltage VBR (V) min 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40.0 44.4 47.8 50.0 53.3 56.7 60.0 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100.0 111.0 122.0 133.0 144.0 167.0 178.0 189.0 max 7.00 7.37 7.98 8.60 9.21 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 58.9 62.7 66.3 71.2 73.7 78.6 86.0 92.1 95.8 104.0 111.0 123.0 135.0 147.0 159.0 185.0 197.0 209.0 Test Current IT (mA) 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Clamping Voltage Peak Pulse @IPPM Current VC (V) IPPM (A) 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0 54.3 48.5 44.7 41.7 38.8 36.7 34.7 32.5 29.4 27.4 25.1 23.2 21.5 20.6 19.2 18.1 17.2 15.4 14.1 12.8 11.9 11.0 10.3 9.4 8.6 7.8 7.2 6.9 6.5 6.1 5.7 5.3 5.2 4.9 4.4 4.1 4.0 3.6 3.4 3.1 2.8 2.7 2.4 2.1 1.9 1.8 Reverse Leakage VRWM IR (uA)* 600 600 400 150 50 25 10 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 * For bidirectional parts with VRWM<10V, the IR max limit is doubled. SA5V0(C)A - SA170(C)A, Rev. D SA5V0(C)A - SA170(C)A Transient Voltage Suppressors (continued) Typical Characteristics 100 100 75 Pulse Power [%] Pulse Power [kW] TA = 25 C 10 1 50 25 0 0.1 0.0001 0.001 0.01 0.1 Pulse Width [ms] 1 10 0 25 100 Total Capacitance, CT [pF] Peak Value Ippm Half Value-Ipp 2 sec Waveform 10/1000 as Defined by R.E.A. 50 td 0 0 1 2 Time [ms] 3 Power Dissipation [W] 1.4 1.2 1 0.8 0.6 0.4 0.2 25 50 75 100 125 150 Lead Temperature [C] 175 Measured at Zero Bias 1000 500 Measured at Stand-Off Voltage (V mw) 200 100 50 1 5 10 50 Reverse Voltage, VR [V] 100 200 Figure 4. Total Capacitance - Unidirectional 1.6 0 T A = 25 C f = 1.0 MHz Visg = 50m Vp-p 2000 10 4 Figure 3. Pulse Waveform 0 200 20 e-kt 200 Figure 5. Steady State Power Derating Curve Peak Forward Surge Current, IFSM [A] Peak Pulse Current [%] sec tf = 10 6000 4000 T A = 25 C Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of Ipp 175 Figure 2. Pulse Derating Curve Figure 1. Peak Pulse Power Rating Curve 150 50 75 100 125 150 Ambient Temperature [C] 100 T A = T Amax 8.3ms Single Half Sine-Wave JEDEC Method 50 20 10 1 2 5 10 20 Number of Cycles at 60Hz 50 100 Figure 6. Non-Repetitive Surge Current SA5V0(C)A - SA170(C)A, Rev. D SA5V0(C)A - SA170(C)A Transient Voltage Suppressors TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. AccuPower Auto-SPM AX-CAP* Build it Now CorePLUS CorePOWER CROSSVOLT CTL Current Transfer Logic DEUXPEED(R) Dual CoolTM EcoSPARK(R) EfficientMax ESBC (R) Fairchild(R) Fairchild Semiconductor(R) FACT Quiet Series FACT(R) FAST(R) FastvCore FETBench FlashWriter(R)* FPS F-PFS FRFET(R) SM Global Power Resource Green FPS Green FPS e-Series Gmax GTO IntelliMAX ISOPLANAR MegaBuck MICROCOUPLER MicroFET MicroPak MicroPak2 MillerDrive MotionMax Motion-SPM mWSaver OptoHiT OPTOLOGIC(R) OPTOPLANAR(R) (R) PDP SPMTM Power-SPM PowerTrench(R) PowerXSTM Programmable Active Droop QFET(R) QS Quiet Series RapidConfigure Saving our world, 1mW/W/kW at a timeTM SignalWise SmartMax SMART START SPM(R) STEALTH SuperFET(R) SuperSOT-3 SuperSOT-6 SuperSOT-8 SupreMOS(R) SyncFET Sync-LockTM (R) * The Power Franchise(R) The Right Technology for Your SuccessTM TinyBoost TinyBuck TinyCalc TinyLogic(R) TINYOPTO TinyPower TinyPWM TinyWire TriFault Detect TRUECURRENT(R)* SerDes UHC(R) Ultra FRFET UniFET VCX VisualMax XSTM * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support, device, or 1. Life support devices or systems are devices or systems which, (a) system whose failure to perform can be reasonably expected to are intended for surgical implant into the body or (b) support or cause the failure of the life support device or system, or to affect its sustain life, and (c) whose failure to perform when properly used in safety or effectiveness. accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I53 (c) Fairchild Semiconductor Corporation www.fairchildsemi.com