RF Connectors
Application Tooling (Continued)
7062 Catalog 1308940 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 5-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Manual Trim and Point Tool
Tyco Electronics offers a
manual tool that performs
both trimming and pointing
operations. Tools are avail-
able for .141 [3.58] and .085
[2.16] diameter semi-rigid
cable. These hand-operated
tools are ideally suited for
engineering, small produc-
tion runs or field use. They
feature tungsten carbide
cutters for durability up to
30 times longer than the life
of a high speed steel cutter.
Replacement cutters are
interchangeable and may
be purchased separately.
AMP T ool M/A-COM T ool
Part Number Part Number Cable Trim Length
(Ref. Only)
1055811-1 2598-5116-54 RG-402/U .085 Fixed
(.141 [3.58]) 2.16
1055815-1 2598-5120-54 RG-405/U .070 Fixed
(.085 [2.16]) 1.78
1055823-1 2598-5137-54 RG-402/U Adjustable*
(.141 [3.58])
1055824-1 2598-5138-54 RG-405/U Adjustable*
(.085 [2.16])
*Adjustable trim length from .050 [1.27] to .140 [3.56].
Cable Benders for
Semi-Rigid Cable
Cable Bender
Description AMP M/A-COM Part Number Bend Radius*
Part Number (Ref. Only)
Cable Bender for 1055479-1 2098-5287-54 1/4 [6.4] 3/8 [9.8]
RG-405/U (.085 [2.16])
Cable Bender for 1055478-1 2098-5286-54 3/8 [9.8] 1/2 [12.7]
RG-402/U (.141 [3.58])
*Radius of the bend is measured from the centerline of the cable.
Trimming Tools for
Semi-Rigid Cable
For soldered semi-rigid
cable connectors using the
cable center conductor as
its contact. These tools are
optional for most installa-
tions but recommended
for optimum connector
performance.
T rim Tool
AMP M/A-COM
Description Part Number Part Number
(Ref. Only)
Trim Tool for SMA Connectors 1055455-1 2098-5272-02
RG-402/U (.141 [3.58])
Trim Tool for SSMA Connectors 1055465-1 2098-5269-02
RG-405/U (.085 [2.16])
Replacement Collets
AMP M/A-COM Part Number Cable
Part Number (Ref. Only)
1055825-1 2598-5145-54 RG-402/U
(.141 [3.58])
1055827-1 2598-5167-54 RG-405/U
(.085 [2.16])
Replacement Cutters
Trimmer: Part Number
1055813-1
Pointer: Part Number
1055814-1
Semi-Rigid Cable Tooling
The tools listed here ar e designed specifically to strip and
terminate semi-rigid cable. These tools operate basically the
same as the flexible cable tools, in that they produce uniform
terminations time after time, without heat damage from
soldering.
Hand Tool for BNC and TNC
Semi-Rigid Cable Connectors
Part Number 59980-1
Frame only — does not include
dies and locator
Stripping Tools
The hand-operated AMP Coaxial Cable Stripper features
interchangeable, color-coded blade cassettes and V-blocks
to accommodate 2- or 3-step stripping for cable diameters
ranging from 2.54 [.10] through 7.62 [.30]. You strip cable
by simply clamping and rotating the tool around the cable.
See Instruction Sheet IS 2766 for further information.
For Use With Tool No.
Connector Type
BNC Single Crimp 603995-1
BNC Commercial and 603995-2
UHF Miniature
UHF Standard 603995-3
BNC MIL Type Dual Crimp 603995-5
BNC Commercial Dual Crimp 603995-6