DATA SHEET CURRENT SENSOR - LOW TCR AUTOMOTIVE GRADE PE_L series 5%, 1%, 0.5% sizes 0201/0402/ 0603/ 0805/ 1206/ 2010/ 2512 Product specification - November 28, 2016 V.5 RoHS compliant & Halogen free - Product specification Chip Resistor Surface Mount SERIES PE_L 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 2 12 SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER This specification describes PE series current sensor - low TCR with lead-free terminations made by metal foil with ceramic substrate. Global part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. GLOBAL PART NUMBER PE XXXX X X X XX XXXX L (1) APPLICATIONS Consumer goods Computer Telecom / Datacom Industrial / Power supply Automotive Alternative Energy FEATURES AEC-Q200 qualified Halogen-free Epoxy RoHS compliant Reduce environmentally hazardous wastes High component and equipment reliability None forbidden-materials used in products/production Low resistances applied to current sensing (2) (3) (4) (5) (6) (7) (1) SIZE 0201/ 0402/ 0603/ 0805/ 1206/ 2010/ 2512 (2) TOLERANCE D = 0.5% (>10m) F = 1% J = 5% (3) PACKAGING TYPE R = Paper/ PE taping reel K = Embossed taping reel (4) TEMPERATURE COEFFICIENT OF RESISTANCE E = 50 ppm/C M = 75 ppm/C F = 100 ppm/C J = 350 ppm/C (5) TAPING REEL 07 / 7W / 7T / 47 / 57= 7 inch dia. Reel and specific rated power. Detailed power rating are shown in the Table 2. (6) RESISTANCE VALUE 5 m to 910 m There are 3~5 digits indicated the resistance value. Letter R is decimal point. Detailed coding rules of resistance are shown in the table of "Resistance rule of global part number". (7) DEFAULT CODE Letter L is the system default code for ordering only. (Note) Resistance rule of global part number Resistance code rule Example 0R001 = 1 m 0RXXX (1 to 910 m) 0R1 = 100 m 0R91 = 910 m ORDERING EXAMPLE The ordering code of a PE2512 1W chip resistor, value 0.006 with 1% tolerance, supplied in 7inch tape reel is: PE2512FKM070R006L NOTE 1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead-Free Process" www.yageo.com Nov. 28, 2016 V.5 - Product specification Chip Resistor Surface Mount PE_L SERIES 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 3 12 MARKING PE0201 / PE0402 No marking YNSC123_1 Fig. 1 PE0603 5m R 50m 51m R 910m 10 51 Fig. 2 Value = 10 m 2 digits Value =51 m PE0805 5m R 50m 010 Fig. 3 Value = 10 m 51m R 910m 051 3 digits Value =51 m PE1206 5m R 50m 51m R 910m R010 R051 Fig. 4 Value = 10 m Value = 51 m 4 digits The "R" is used as a decimal point; the other 3 digits are significant. PE2010 / PE2512 5m R 100m R010 Fig. 5 Value = 10 m 4 digits The "R" is used as a decimal point; the other 3 digits are significant. Outlines For dimensions, please refer to Table 1 5m R 50m R010 51m R 910m R051 YNSC143 Fig. 5 Chip resistor outlines www.yageo.com Nov. 28, 2016 V.5 - Product specification Chip Resistor Surface Mount PE_L SERIES 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 4 12 DIMENSION Table 1 For outlines, please refer to Fig. 4 TYPE RESISTANCE RANGE L (mm) W (mm) H (mm) I1 (mm) PE0201 50 m R 200 m 0.60 0.03 0.31 0.04 0.27 0.04 0.14 0.06 PE0402 10 m R 910 m 1.00+0.10/-0.15 0.50+0.10/-0.15 0.35 0.15 0.25 0.10 5 m , 10 m , 15m , 20 m R 50 m 1.60 0.20 0.76 0.25 0.35 0.25 0.38 0.25 51 m R 910 m 1.52 0.25 0.76 0.25 0.45 0.10 0.38 0.25 5 m , 10 m , 15m , 20 m R 50 m 2.03 0.25 1.27 0.25 0.35 0.25 0.38 0.25 51 m R 910 m 2.03 0.25 1.27 0.25 0.55 0.10 0.35 0.20 5 m 3.20 0.25 1.60 0.25 0.64 0.25 0.64 0.25 6 m R 910 m 3.20 0.25 1.60 0.25 0.64 0.25 0.51 0.25 5 m R 6 m 5.08 0.25 2.54 0.25 0.64 0.25 1.47 0.25 7 m R 100 m 5.08 0.25 2.54 0.25 0.64 0.25 0.51 0.25 6 m R 100 m 6.35 0.25 3.18 0.25 0.64 0.25 0.76 0.25 PE0603 PE0805 PE1206 PE2010 PE2512 Note: 1. For relevant physical dimensions, please refer to construction outlines. 2. Please contact with sales offices, distributors and representatives in your region before ordering. www.yageo.com Nov. 28, 2016 V.5 - Product specification Chip Resistor Surface Mount PE_L SERIES 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 5 12 ELECTRICAL CHARACTERISTICS Table 2 SERIES SIZE 0201 Fig. 4 PE POWER RATING (1) 07 7W 1/20W 1/10W TOLERANCE RESISTANCE RANGE 7T 47 57 --- --- --- 50 m R 200m --- 10 m R 910 m Chip resistor outlines 0402 1/16W 1/8W 1/6W 1/4W 0603 1/10W 1/5W 1/3W 2/5W 1/2W 0.5%(>10 m ) 0805 1/8W 1/4W 1/3W 1/2W --- 1% 20 m R 910 m 1206 1/4W 1/2W --- 1W --- 5% 5 m R 910 m 2010 1/2W 1W --- --- --- 5m R 100m 2512 1W 2W --- --- --- 6m R 100m TEMPERATURE COEFFICIENT OF RESISTANCE 20m R 70m 350ppm/ 70m<R 200m 100ppm/ 5m , 10m , 15m 100 ppm/C 75 ppm/C 100 ppm/C 50 ppm/C 75 ppm/C 100 ppm/C Note: 1. Global part number (code 10 - 11) 2. Please contact with sales offices, distributors and representatives in your region before ordering. FUNCTIONAL DESCRIPTION OPERATING TEMPERATURE RANGE PE0201 to PE0402 Range: -55C to +125C (Fig. 6-1) PE0603 to PE2512 Range: -55C to +170C (Fig. 6-2) POWER RATING Standard rated power at 70C: PE0201 = 1/20W PE0402 = 1/16W PE0603 = 1/10W PE0805 = 1/8W PE1206 = 1/4W PE2010 = 1/2W PE2512 = 1W For detail power value, please refer to Table 2. Fig. 6-1 Maximum dissipation (P max ) in percentage of rated power as a function of the operating ambient temperature (T amb ) Fig. 6-2 Maximum dissipation (P max ) in percentage of rated power as a function of the operating ambient temperature (T amb ) RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V= (PxR ) Where V = Continuous rated DC or AC (rms) working voltage (V) P = Rated power (W) R = Resistance value () www.yageo.com Nov. 28, 2016 V.5 - Product specification Chip Resistor Surface Mount SERIES PE_L 6 12 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PACKING STYLE REEL DIMENSION PE0201 PE0402 PE0603 PE0805 PE1206 PE2010 PE2512 Paper taping reel (R) 7" (178 mm) 10,000 10,000 5,000 5,000 4,000 --- --- Embossed taping reel (K) 7" (178 mm) --- --- --- --- --- 4,000 4,000 PAPER TAPE Fig. 7 Paper Tape Table 4 Dimensions of paper tape for relevant chip resistors size SIZE Unit: mm SYMBOL A0 B0 W E F P0 P1 P2 O D0 T PE0201 0.35 0.10 1.65 0.10 8.00 0.30 1.75 0.10 3.50 0.10 4.00 0.10 2.00 0.05 2.00 0.05 1.50 0.10 0.53 0.10 PE0402 0.65 0.10 1.15 0.10 8.00 0.30 1.75 0.10 3.50 0.10 4.00 0.10 2.00 0.05 2.00 0.05 1.50 0.10 0.53 0.10 PE0603 1.20 0.15 1.90 0.15 8.00 0.30 1.75 0.10 3.50 0.10 4.00 0.10 4.00 0.10 2.00 0.10 1.50 0.10 0.55 0.15 PE0805 1.60 0.15 2.30 0.15 8.00 0.30 1.75 0.10 3.50 0.10 4.00 0.10 4.00 0.10 2.00 0.10 1.50 0.10 0.85 0.15 PE1206 1.90 0.10 3.50 0.10 8.00 0.30 1.75 0.10 3.50 0.10 4.00 0.10 4.00 0.10 2.00 0.10 1.50 0.10 1.50 0.10 www.yageo.com Nov. 28, 2016 V.5 - Product specification Chip Resistor Surface Mount PE_L SERIES 7 12 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 EMBOSSED TAPE Fig. 8 Embossed Tape Table 5 Dimensions of embossed tape for relevant chip resistors size SIZE SYMBOL A0 Unit: mm B0 W E F P0 P1 P2 O D0 O D1 T PE2010 3.00 0.15 5.60 0.15 12.10 0.30 1.75 0.10 5.50 0.10 4.00 0.10 4.00 0.10 2.00 0.10 1.50 0.10 1.50 0.10 0.80 0.15 PE2512 3.40 0.15 6.70 0.15 12.10 0.30 1.75 0.10 5.50 0.10 4.00 0.10 4.00 0.10 2.00 0.10 1.50 0.10 1.50 0.10 0.80 0.15 www.yageo.com Nov. 28, 2016 V.5 - Product specification Chip Resistor Surface Mount SERIES PE_L 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 8 12 REEL SPECIFICATION Fig. 9 Reel Table 6 Dimensions of reel specification for relevant chip resistors size QUANTITY PER REEL SIZE REEL SIZE SYMBOL 8 mm TAPE WIDE 12 mm TAPE WIDE 24 mm TAPE WIDE A Unit: mm N C D W1 W2 MAX. PE0201 10,000 7" (O 178 mm) --- --- 180.0+0/-3 60.0+1/-0 13.0 0.2 21.0 0.8 9.0 0.30 12.4 PE0402 10,000 7" (O 178 mm) --- --- 180.0+0/-3 60.0+1/-0 13.0 0.2 21.0 0.8 9.0 0.30 12.4 PE0603 5000 7" (O 178 mm) -- -- 180.0+0/-3 60.0+1/-0 13.0 0.2 21.0 0.8 8.4 +1/-0 12.4 PE0805 5000 7" (O 178 mm) -- -- 180.0+0/-3 60.0+1/-0 13.0 0.2 21.0 0.8 8.4 +1/-0 12.4 PE1206 4000 7" (O 178 mm) -- -- 180.0+0/-3 60.0+1/-0 13.0 0.2 21.0 0.8 8.4 +1/-0 12.4 PE2010 4000 -- 7" (O 178 mm) -- 180.0+0/-3 60.0+1/-0 13.0 0.2 21.0 0.8 12.3 +1/-0 18.4 PE2512 4000 -- 7" (O 178 mm) -- 180.0+0/-3 60.0+1/-0 13.0 0.2 21.0 0.8 12.3 +1/-0 18.4 LEADER/TRAILER TAPE SPECIFICATION Fig.10 Leader/Trailer Tape www.yageo.com Nov. 28, 2016 V.5 - Product specification Chip Resistor Surface Mount PE_L SERIES 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 9 12 FOOTPRINT AND SOLDERING PROFILES For recommended soldering profiles, please refer to data sheet "Chip resistors mounting". FOOTPRINT Fig. 11 Single resistor chips recommended dimensions of footprints Table 7 Footprint dimensions SIZE RESISTANCE RANGE PE0201 Unit: mm A B C D 50 m R 200 m 1.00 0.30 0.35 0.40 PE0402 10 m R 910 m 1.45 0.35 0.55 0.55 PE0603 5 m , 10 m , 15 m , 20m R 910 m 2.52 0.50 1.01 1.01 PE0805 5 m , 10 m , 15 m , 20m R 910 m 2.54 0.50 1.02 1.27 PE1206 5 m R 910 m 3.90 0.76 1.57 1.78 5 m R 6 m 6.12 1.40 2.36 3.05 7 m R 100 m 6.10 3.30 1.40 3.05 6 m 7.40 3.18 2.11 3.68 7 m R 100 m 7.36 4.06 1.65 3.68 PE2010 PE2512 www.yageo.com Nov. 28, 2016 V.5 - Product specification Chip Resistor Surface Mount PE_L SERIES 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 10 12 TESTS AND REQUIREMENTS Table 8 Test condition, procedure and requirements TEST TEST METHOD PROCEDURE Life/ Operational Life/ Endurance MIL-STD-202G-method 108 1,000 hours at 70 2 C applied RCWV 1.5 hours on, 0.5 hour off, still air required High Temperature Exposure/ Endurance at Upper Category Temperature MIL-STD-202G-method 108 IEC 60115-1 4.25.1 IEC 60115-1 4.25.3 1,000 hours at maximum operating temperature depending on specification, unpowered REQUIREMENTS (1%+0.0005 ) (1%+0.0005 ) No direct impingement of forced air to the parts Tolerances: 0201/0402 155 3 0603 and above 170 3 Moisture Resistance MIL-STD-202G-method 106 Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d with 25 C / 65 C 95% R.H, without steps 7a & 7b, unpowered (0.5%+0.0005 ) Parts mounted on test-boards, without condensation on parts Measurement at 24 2 hours after test conclusion Thermal Shock MIL-STD-202G-method 107 -55/+125 C (1%+0.0005 ) Note: Number of cycles required is 300. Devices mounted Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air - Air Short Time Overload IEC60115-1 4.13 Board Flex/ Bending IEC60115-1 4.33 5 times of rated power for 5 seconds at room temperature (1%+0.0005 ) Device mounted on PCB test board as described, only 1 board bending required (1%+0.0005 ) No visible damage No visible damage Bending for 0201: 3mm 0402 and above: 2mm Holding time: minimum 60 seconds Biased Humidity MIL-STD-202 Method 103 1,000 hours at 85C/85%R.H. 10% of operating power, no condensation on the devices, circulating air. (1.0 % + 0.0005) www.yageo.com Nov. 28, 2016 V.5 - Product specification Chip Resistor Surface Mount PE_L SERIES 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 11 12 TEST TEST METHOD PROCEDURE REQUIREMENTS Solderability - Wetting IPC/JEDEC Electrical Test not required Well tinned (95% covered) J-STD-002B test B Magnification 50X No visible damage SMD conditions: 1st step: method B, aging 4 hours at 155 C dry heat 2nd step: leadfree solder bath at 245 3 C Dipping time: 3 0.5 seconds - Leaching - Resistance to Soldering Heat IPC/JEDEC No visible damage J-STD-002B test D Leadfree solder, 260 C, 30 seconds immersion time MIL-STD-202G-method 210F Condition B, no pre-heat of samples (0.5%+0.0005 ) IEC 60115-1 4.18 Leadfree solder, 260 C, 10 seconds immersion time No visible damage Procedure 2 for SMD: devices fluxed and cleaned with isopropanol www.yageo.com Nov. 28, 2016 V.5 - Product specification Chip Resistor Surface Mount PE_L SERIES 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 12 12 REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION POWER RESISTANCE TOLERANCE - Extend resistor value for 0.5%RANGE 0603 1/10W, 1/5W, 3/10W, 2/5W, 1/2W Version 40805 Dec. 21, 2015 1/8W, 1/4W, 1/3W, 1/2W 1/4W, 1/2W 1206 5 m R < 100 m Version 5TYPE Nov 23,2016 Version 3 1/2W, 1W Aug. 06, 2015 - - The resistors are constructed using outstanding TCR level material, which makes Yageo PF for current Version 2 Apr.resistors 20, 2015 excellent sensing application in battery charger circuit & DC-DC converter. Version 1 Mar.The 04, 2015 composition of the resistive material is adjusted to give the PF 2010 approximate required resistance is covered Version 0 Feb.and 10, 2015 - with a protective coating, which printed with the resistance value. Finally, the three external terminations (Ni / matte Tin) are added, as shown in Fig. 4. 2512 4527 TEMPERATURE COEFFICIENT OF RESISTANCE - Update resistance value 4 m R < 100 m 3 m R < 100 m - Update 0603 to 1206 TCR - Extend resistor value Update TCR and operating temperature - 1% 2% 5 m R < 100 m 75 ppm/C 5% - New datasheet for current sensor - low TCR PE series sizes of 0201/0402/0603/0805/1206/2010/2512, 0.5%, 1%, and 5% 1W, 2W 1 m R < 100 m 3W 1 m R 50 m 2W, 3W, 5W 6 m R < 1 NOTE: 1. PLEASE CONTACT WITH SALES OFFICES, DISTRIBUTORS AND REPRESENTATIVES IN YOUR REGION BEFORE ORDERING " Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN." www.yageo.com Nov. 28, 2016 V.5