General Accessories Power Supply Units Types SS 110, SS 120, SS 130, SS 140 * Insulation: 4 kV rms/8 mm * LED-indication for power supply ON * S-housing * Power supply: 115 or 230 VAC * Output: 24 V/12 VAC, 0.5 to 1 A 24 V/12 VDC, 0.3 to 1 A Product Description For mounting on an 11-pole circular socket. Used together with the whole timer program Ordering Key as supply where 12 VAC/DC or 24 VDC is needed. SS 110 230 12 Housing Function Type Power supply Output Type Selection Supply Regulated Short-circuit 12 VAC/1 A 115 VAC 230 VAC 115 VAC 230 VAC 115 VAC 230 VAC 115 VAC 230 VAC No No No No No No Yes Yes Protection Protection Protection Protection Protection Protection Protection Protection SS 110 115 12 SS 110 230 12 Note: *AC output 0.5 A 12 VDC/1 A 12 VDC/0.5 A 24 VAC/0.3 A 24 VDC/0.5 A SS 110 115 24* SS 110 230 24* SS 120 115 12 SS 120 230 12 SS 120 115 24 SS 120 230 24 SS 130 115 12 SS 130 230 12 SS 140 115 12 SS 140 230 12 SS 130 115 24** SS 130 230 24** SS 140 115 24** SS 140 230 24** **DC output 0.3 A Supply Specifications General Specifications Power supply AC types Rated operational voltage through pins 2 & 10 230 115 Dropout tolerance Rated insulation voltage Rated transient protection volt. Indication for Power supply ON Environment Pollution degree Operating temperature Storage temperature Weight CE-marking Installation cat. III (IEC 60664) 230 VAC 15%, 45 to 65 Hz 115 VAC 15%, 45 to 65 Hz 40 ms 2.0 kVAC (rms) (supply/elec.) 4 kV (1.2/50 ms) (line/neutral) LED, green IP 20 B 2 (IEC 60664) -20 to +50C (-4 to +122F) -50 to +85C (-58 to +185F) 500 g Yes Wiring Diagrams AC output ~ Power supply SS 110, SS 120, SS 130, SS 140 DC output + - Note: It is recommended always to use a hold down spring type HF. Power supply SS 110, SS 120, SS 130, SS 140 Specifications are subject to change without notice (25.06.99) 1