SPECIFICATION CONTROL DRAWING
THERMOFIT
DEVICES Raychem Corporation
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE: SOLDERSLEEVE* DEVICE
SHIELD TERMINATION WITH BRAID
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS. DOCUMENT NO.: S03-XX-R-100HN
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend this
drawing at any time. Users should evaluate
the suitability of the product for their
application.
DCR NUMBER:
D990967 REPLACES: N/A
DRAWN BY:
M. FORONDA DATE: 12/03/99 PROD. REV.
SEE TABLE DOC ISSUE:
0 SCALE:
None SIZE:
A SHEET:
1 of 1
* A trademark of Raychem Corpor ation.
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Revision Product Dimensions Cable Dimensions
Product
Name Ident.
Code L±1.75
(L±0.07) øB
min. øC
min. H
min. øE
max. øF
min. øD
max.
S03-06-R-100HN A S0306R 16.5
(0.650) 1.90
(0.075) 2.67
(0.105) 8.20
(0.323) 2.67
(0.105) 0.90
(0.035) 1.90
(0.075)
S03-07-R-100HN A S0307R 16.5
(0.650) 2.67
(0.105) 3.68
(0.145) 8.20
(0.323) 3.68
(0.145) 1.40
(0.055) 2.67
(0.105)
S03-08-R-100HN A S0308R 16.5
(0.650) 4.32
(0.170) 5.08
(0.200) 8.20
(0.323) 5.08
(0.195) 2.15
(0.085) 4.32
(0.170)
S03-09-R-100HN A S0309R 19.1
(0.750) 5.97
(0.235) 6.48
(0.255) 8.20
(0.323) 6.48
(0.255) 3.30
(0.130) 5.97
(0.235)
S03-10-R-100HN A S0310R 19.1
(0.750) 6.98
(0.275) 7.62
(0.300) 8.20
(0.323) 7.62
(0.300) 4.30
(0.170) 6.98
(0.275)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX: TYPE ROL1 per ANSI-J-STD-004.
THERMAL INDICATOR: Color change violet to colorless.
3. MELTABLE RINGS: Stabilized thermoplastic. Color: blue.
4. PRE-INSTALLED BRAID: Nickel plated copper strands per ASTM B355 Class 7. CMA 640.
APPLICATION
1. These parts are designed to provide an environment protected shield termination on cables, rated for 125°C minimum, meeting
the dimensional criteria listed and having tin or silver plated shields and insulation compatible with the insert material.
For compatible insulations, see MIL-S-83519/2 or consult Raychem.
2. When installed per Raychem process standard RCPS-100-70, assemblies will meet those requirements of Raychem Specification
RT-1404 and MIL-S-83519/2 which do not require electrical testing while parts are immersed in water.
3. Temperature range: -55°C to +150°C.
4. Parts shall be marked with identification code per table.
For best results, prepare
the cable as shown:
