Notice for TAIYO YUDEN Products
[ For General Electronic Equipment
(General Environment) ]
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2017. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully
before practical application or use of our products.
Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or
equipment incorporating our products, which are caused under the conditions other than those specified in this
catalog or individual product specification sheets.
■ Please contact TAIYO YUDEN for further details of product specifications as the individual product specification
sheets are available.
■ Please conduct validation and verification of our products in actual condition of mounting and operating
environment before using our products.
■ The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA
equipment, home electric appliances, office equipment, information and communication equipment including,
without limitation, mobile phone, and PC) and medical equipment classified as Class I or II by IMDRF. Please be
sure to contact TAIYO YUDEN for further information before using the products for any equipment which may
directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment,
disaster prevention equipment, medical equipment classified as Class III by IMDRF, highly public information
network equipment including, without limitation, telephone exchange, and base station).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g.,
aerospace equipment, aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control
equipment, undersea equipment, military equipment).
*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g.,
in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN.
Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment.
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic
equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to
install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way
responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog
for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above.
■ Information contained in this catalog is intended to convey examples of typical performances and/or applications
of our products and is not intended to make any warranty with respect to the intellectual property rights or any
other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights.
■ Please note that the scope of warranty for our products is limited to the delivered our products themselves and
TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products.
Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in
accordance with such agreement.
■ The contents of this catalog are applicable to our products which are purchased from our sales offices or
authorized distributors (hereinafter TAIYO YUDENs official sales channel). Please note that the contents of this
catalog are not applicable to our products purchased from any seller other than TAIYO YUDENs official sales
channel.
■ Caution for Export
Some of our products listed in this catalog may require specific procedures for export according to U.S. Export
Administration Regulations, Foreign Exchange and Foreign Trade Control Law of Japan, and other applicable
regulations. Should you have any questions on this matter, please contact our sales staff.
1
8
c_pas_cylinder_e-E06R01
CYLINDER TYPE POLYACENE CAPACITORS
■PARTS NUMBER
P A S 0 8 1 5 L S 2 R 5 1 0 5
① ② ③ ④ ⑤ ⑥
①Series name
Code Series name
PAS Polyacene capacitor
②Dimensions（φD）
Code Dimensions（φD）［mm］
08 8
10 10
12 12.5
③Dimensions（L）
Code Dimensions（L）［mm］
15 15
16 16
20 20
30 30
35 35
④Characteristics spec
Code Characteristics spec
LS Low ESR type
LN High Reliability type
LA High Voltage type
⑤Maximum usable voltage
Code Maximum usable voltage［V］
2R5 2.5
2R7 2.7
3R0 3.0
※R＝Decimal point
⑥Nominal capacitance
Code
（example） Nominal capacitance［F］
105 10×10
5
μF＝1F
～
～
206 20×10
6
μF＝20F
■EXTERNAL DIMENSIONS
Characteristics spec Part number φD L φd P
Low ESR type
（LS series）
PAS0815LS2R5105 8 15 0.6 3.5
PAS1016LS2R5205 10 16 0.6 5.0
High Reliability type
(LN Series)
PAS0815LN2R7205 8 15 0.6 3.5
PAS1030LN2R7705 10 30 0.6 5.0
PAS1030LN2R7905 10 30 0.6 5.0
PAS1220LN2R7905 12.5 20 0.6 5.0
PAS1230LN2R7166 12.5 30 0.6 5.0
High Voltage Type
(LA Series)
PAS1020LA3R0405 10 20 0.6 5.0
PAS1220LA3R0905 12.5 20 0.6 5.0
PAS1235LA3R0206 12.5 35 0.6 5.0
Unit：mm
■PARTS NUMBER
Characteristics spec Part number Maximum usable voltage［V］ Nominal capacitance［F］ ESR@1KHz［mΩ］
Low ESR type
（LS series）
PAS0815LS2R5105 2.5 1 70
PAS1016LS2R5205 2 50
High Reliability type
(LN Series)
PAS0815LN2R7205
2.7
2 180
PAS1030LN2R7705 7 80
PAS1030LN2R7905 9 80
PAS1220LN2R7905 9 60
PAS1230LN2R7166 16 50
High Voltage Type
(LA Series)
PAS1020LA3R0405
3.0
4 300
PAS1220LA3R0905 9 200
PAS1235LA3R0206 20 100
WAVE
ENERGY DEVICES
（
SUPER CAPACITORS
）
▶Thiscatalogcontainsthetypicalspecicationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecicationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
CYLINDER TYPE POLYACENE CAPACITORS
169
1
8
c_pas_cylinder_e-E06R01
■SPECIFICATIONS
【LS series】
Part number
Operating temp.
range
［℃］
Maximum
usable voltage
［V］
Initial
capacitance
［F］
Initial ESR@1KHz
［mΩ］ Temperature characteristics
PAS0815LS2R5105
－25～＋70 2.5
1.0±20％ Under 70
Lowest temperature（－25℃）
Capacitance：Over 70％ of initial spec.
Internal resistance：Within 4 times of initial spec.
PAS1016LS2R5205 2.0±20％ Under 50
Highest temperature（70℃）
Capacitance：Within initial spec.
Internal resistance：Within initial spec.
【LN series】
Part number
Operating temp.
range
［℃］
Maximum
usable voltage
［V］
Initial
capacitance
［F］
Initial ESR@1KHz
［mΩ］ Temperature characteristics
PAS0815LN2R7205
－40～＋70
Over ＋70～＋85
2.7
2.3
2.0±20％ Under 180 Lowest temperature（－40℃）
Capacitance：Over 85％ of initial spec.
Internal resistance：Within 6 times of initial spec.
High temperature（70℃）
Capacitance：Within initial spec.
Internal resistance：Within initial spec.
Highest temperature（85℃）
Capacitance：Over 90％ of initial spec.
Internal resistance：Within initial spec.
PAS1030LN2R7705 7.0±20％ Under 80
PAS1030LN2R7905 9.0±20％ Under 80
PAS1220LN2R7905 9.0±20％ Under 60
PAS1230LN2R7166 16±20％ Under 50
【LA series】
Part number
Operating temp.
range
［℃］
Maximum
usable voltage
［V］
Initial
capacitance
［F］
Initial ESR@1KHz
［mΩ］ Temperature characteristics
PAS1020LA3R0405
－25～＋60
Over ＋60～＋70
Over ＋70～＋85
3.0
2.7
2.3
4.0±20％ Under 300 Lowest temperature（－25℃）
Capacitance：Over 70％ of initial spec.
Internal resistance：Within 4 times of initial spec.
High temperature（60℃/70℃）
Capacitance：Within initial spec.
Internal resistance：Within initial spec.
Highest temperature（85℃）
Capacitance：Over 90％ of initial spec.
Internal resistance：Within initial spec
PAS1220LA3R0905 9.0±20％ Under 200
PAS1235LA3R0206 20±20％ Under 100
ENERGY DEVICES
（
SUPER CAPACITORS
）
▶Thiscatalogcontainsthetypicalspecicationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecicationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
170
1
8
c_pas_cylinder_e-E06R01
■RELIABILITY DATA
Items Specified value Test methods and remark
LS series LN series LA series
1. Operating temperature range －25～＋70℃ －40～＋70 / +85℃ －25～+60 / +70 /＋85℃
2. Maximum usable voltage 2.5V 2.7V / 2.3V 3.0V / 2.7V / 2.3V
3. Soldering
Capacitance：Within initial spec.
Internal resistance：Within initial spec.
Appearance：No noticeable abnormality
Material：Sn-3Ag-0.5Cu
Solder temperature：260±5℃
Dipping time：10±1 sec.
Dipping depth：1.5～2mm from cell body
4. Floating charge
characteristics
Capacitance：Over 70％ of initial spec.
Internal resistance：Within 4 times of initial spec.
Appearance：No noticeable abnormality
Apply a max. usable voltage to capacitor for
1000 hours at max. operating temperature and
measure the floating charge characteristics
after returning to normal temperature and
humidity.
5. Charge/Discharge cycle
characteristics
Measure the charge/discharge cycle
characteristics after 10000 charge/discharge
cycle at 25±5℃ with under mentioned
charge/discharge cycle test condition for
each parts.
6. Thermal durability
Capacitance：Within initial spec.
Internal resistance：Within initial spec.
Appearance：No noticeable abnormality
Leave the capacitor in environment of the
max. usable temperature ±2℃ and -25±2℃
consecutively for 96 hours each, and return to
normal temperature and humidity.
7. Humidity durability
Capacitance：Within initial spec.
Internal resistance：Within 4 times of initial spec.
Appearance：No noticeable abnormality
Temperature：40±2℃, humidity：90～95％RH
leave the capacitor for 500 hours, and return
to normal temperature and humidity.
8. Shock resistance
No exterior abnormality observed：
initial spec. values retained
According to JIS C 60068-2-27
Half-sine wave A＝294
9. Vibration resistance
Apply a sine wave vibration of 1.5mm
amplitude and frequency 10～55Hz, for 2
hours per each direction （X,Y and Z）, total 6
hours.
●Charge/Discharge cycle test condition
Part number Charging voltage
[V]
Charging time
[sec]
Max. Charging
current [A]
Discharge current
[A]
Terminal voltage
[V]
PAS0815LS2R5105 2.5 10 1 1
1.5
PAS1016LS2R5205
PAS0815LN2R7205
2.7
30
0.2 0.2
PAS1030LN2R7705 0.9 0.9
PAS1030LN2R7905 1 1
PAS1220LN2R7905 1 1
PAS1230LN2R7166 1 1
PAS1020LA3R0405
3.0
2 0.5
PAS1220LA3R0905 3 1
PAS1235LA3R0206 5 1
ENERGY DEVICES
（
SUPER CAPACITORS
）
▶Thiscatalogcontainsthetypicalspecicationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecicationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
171
1
8
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_pas_cylinder_prec_e-E06R01
CYLINDER TYPE POLYACENE CAPACITORS
■PRECAUTIONS
1. Use within the usable voltage range
Applying voltage exceeding the maximum working voltage may cause leakage or damage.
2. Use within the operating temperature range
3. Lifetime of POLYACENE capacitor is finite
The life of the product is affected by operating temperature and operating voltage. In addition, the internal resistance rises gradually with usage and the
capacity drops.
4. There are temperature dependence and voltage dependence in the electrical characteristics
The electrical characteristics of the product vary depending on operating temperature and voltage. Please check the temperature characteristics before using
the product.
5. Polyacene capacitor has polarity
Check the polarity before use. It will be damage if it is reversely charged. Avoid using products with reverse voltage applied.
6. Be aware of the ripple current and use in circuits that repeat sudden charge and discharge
POLYACENE capacitor may be used in a circuit that repeats sudden charge / discharge or application of high ripple current may cause the life to be
shortened due to heat generation. Please inquire when using it for such a circuit.
7. Mind the voltage drop during discharge (backup)
If the discharge current is large, a voltage drop occurs at the start of discharge. Be careful about discharge current.
8. Series connection
When POLYACENE capacitors are connected in series, the balance of the applied voltage may be lost, and some capacitors may be overcharged or may lead
to shortening lifetime and breakdown. Take a margin against the maximum usable voltage or add a balancing resister.
9. POLYACENE capacitor has the pressure release vent
In case of inside pressure of capacitor excessively rising, the pressure release vent will be opened in order to release inner gas. Following clearance
(Diameter<φ18 : over 2mm, Diameter ≧φ18 : over 3mm) should be made above the pressure release vent.
Don’t set up wiring or a pattern in the upper part of the pressure release vent, so that the high temperature gas is gushed when the pressure release vent
open.
The product which open the pressure release vent cannot use.
10. Iinsulation of the aluminum case and sleeve of lithium ion capacitor is not guaranteed
There is a possibility of short-circuiting when the circuit pattern is arranged under the POLYACENE capacitor or when it comes in contact with other parts.
11. Environmental of usage
In case POLYACENE capacitor is used in high humidity, alkaline or acid air, it may cause deteriorating of its performance and short circuit by corrosion of
outer can or lead terminal. In addition, used in sudden temperature change or high humidity, it may cause deteriorating of its performance and electrolyte leak
by dew condensation.
12. Don’t apply shock and vibration or pressure
POLYACENE capacitors are weak parts for mechanical shock. Be careful not to drop the product or apply strong force to the main body and lead terminal.
Also, if you apply excessive vibration or shock after mounting, stress such as grasping, tilting, pushing, twisting, etc., the soldered part may come off or the
lead terminal part may be damaged.
13. Be careful not to apply excessive heat when mounting
If excessive heat stress is added to the product, electric characteristics deterioration and electrolyte leakage may occur.
Soldering conditions should be within the range specified in the delivery specifications.
14. Please consult about substrate cleaning after soldering
There are cases where the product may be adversely affected depending on the type of solvent and washing conditions, so please consult in advance.
15. Storage
Keep following cautions for storage of POLYACENE capacitor.
・Don’t store in the high temperature and the high humidity condition and a place where receiving direct sunlight. Storing POLYACENE capacitor in the room
condition of 10 ºC - 35 ºC and less than 65% relative humidity is recommended. Sudden temperature change or high humidity may cause deteriorating of its
characteristics and solderability.
・Don’t store POLYACENE capacitor near water, salt water or oil, and in the dew condensation, gasified oil or salinity filled place.
・Don’t store POLYACENE capacitor in the hazardous gas (hydrogen sulfide, sulfurous, chlorine, ammonia, bromine, methyl bromine, ozone and etc.) .
・Don’t fumigate by halogen fumigant.
・Don’t store POLYACENE capacitor near acid or alkaline solvent.
・Don’t store POLYACENE capacitor in a place where exposed to ultraviolet or radioactive rays.
・Don’t store POLYACENE capacitor in a place where vibration and shock might occur.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_pas_cylinder_prec_e-E06R01
16. Disposal
Dispose POLYACENE capacitor properly with a decree or the regulation a local public organization designates.
17. Usage
POLYACENE capacitor is developed on the assumption that this product will be used in the memory-backup & RTC for usage of information & communication
equipment, home electronics, audio & visual equipment, office equipment, etc. Consult us about using high reliability and safety required products such as
medical equipment, transportation equipment, industrial equipment, flight / space equipment and emergency equipment, etc.
18. Other Notice
・Don’t heat or throw POLYACENE capacitor into fire.
・Don’t short-circuit.
・Don’t solder directly to a cell body.
・Don’t open a body.
・Don’t deform.
・Don’t apply pressure.
※All of the contents specified herein are subject to change without notice due to technical improvements, etc.
※Please see JEITA RCR-2370C for details.
JEITA RCR-2370C
「Safety application guide of electric double layer capacitor (EDLC)（Directions guideline of electric double layer capacitor）」
〔Corporation Electronic Industries Association of Japan. Enactment in March 1995 and revision in July 2008〕
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Taiyo Yuden:
PAS0815LA2R3185 PAS1020LA2R3475 PAS1020LA3R0405 PAS1220LA3R0905 PAS1235LA3R0206
PAS1840LA3R0506 PAS311HR-VA6R PAS311HR-VG1 PAS311SR-VA6R PAS409HR-VE5R PAS0815LS2R5105
PAS1016LS2R5205 PAS614L-VL3 PAS1030LN2R7905 PAS1235LN2R7206 PAS0815LN2R7205
PAS1020LN2R7405 PAS1220LN2R7905 PAS1030LN2R7705
