Cree(R) XLamp(R) XQ-E LEDs CLD-DS83 Rev 6B Product family data sheet XQ-E High Density LEDs XQ-E High Intensity LEDs Product Description FEATURES Table of Contents The XLamp(R) XQ-E LEDs are available * Cree's smallest lighting class LED: Characteristics.............................................2 in two versions: high density and high intensity. The XQ-E High Density 1.6mm X 1.6mm * Available in highdensity & Flux Characteristics - High Density White..3 Flux Characteristics - High Density Color...4 LED enables lighting manufacturers highintensity versions for design Flux Characteristics - High Intensity to significantly reduce the size and flexibility White ............................................................6 total cost of their LED luminaires versus similar performance 3.5mm footprint LEDs, without sacrificing lumen output, efficacy or reliability. The XQ-E's combination of optical symmetry, consistent design across all configurations and tiny 1.6mm X 1.6mm footprint simplifies manufacturing and design while providing excellent color mixing. * Available in 70, 80, & 90 CRI white, Flux Characteristics - High Intensity royal blue, blue, green, PC amber, Color.............................................................7 redorange, red & photo red Relative Spectral Power Distribution..........9 * Maximum drive current: 1A (high Relative Flux vs. Junction density & high intensity) Temperature.............................................. 11 * Reflow solderable - JEDEC Electrical Characteristics.......................... 14 J-STD020C compatible * Unlimited floor life at 30C/85% RH * RoHS and REACh compliant * UL recognized component (E349212) (R) Relative Flux vs. Current........................... 16 Typical Spatial Distribution....................... 19 Thermal Design......................................... 21 Reflow Soldering Characteristics............. 23 Notes......................................................... 24 The new XQ-E High Intensity LED uses an Mechanical Dimensions........................... 26 innovative primary optic design optimized Tape and Reel............................................ 28 to deliver maximum candela, especially Packaging.................................................. 30 www.cree.com/Xlamp through narrowbeam secondary optics. Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1 XLamp (R) XQ-E LED Characteristics Characteristics Unit Thermal resistance, junction to solder point - white, royal blue, blue C/W 6 Thermal resistance, junction to solder point - green C/W 9 Thermal resistance, junction to solder point - PC amber C/W 8 Thermal resistance, junction to solder point - redorange, red, photo red Minimum Typical C/W 5 Viewing angle (FWHM) - High Density white degrees 110 Viewing angle (FWHM) - High Density royal blue, blue, green, PC amber degrees 125 Viewing angle (FWHM) - High Density redorange, red, photo red degrees 130 Viewing angle (FWHM) - High Intensity white degrees 120 Viewing angle (FWHM) - High Intensity royal blue, blue, green degrees 130 Viewing angle (FWHM) - High Intensity PC amber degrees 120 Viewing angle (FWHM) - High Intensity redorange, red degrees 125 Temperature coefficient of voltage - white mV/C -2.3 Temperature coefficient of voltage - royal blue, blue mV/C -3.3 Temperature coefficient of voltage - green mV/C -3.8 Temperature coefficient of voltage - PC amber mV/C -3.3 Temperature coefficient of voltage - redorange, red mV/C -1.8 Temperature coefficient of voltage - photo red mV/C -2.8 ESD withstand voltage (HBM per Mil-Std-883D)- High Density V ESD classification (HBM per Mil-Std-883D) - High Intensity DC forward current Reverse voltage Maximum 8000 Class 3A mA 1000 V 5 Forward voltage (@ 350mA, 85C) - white V 2.9 3.25 Forward voltage (@ 350 mA, 25C) - royal blue, blue V 3.1 3.5 Forward voltage (@ 350 mA, 25C) - green V 3.2 3.6 Forward voltage (@ 350 mA, 25C) - PC amber V 3.1 3.5 Forward voltage (@ 350 mA, 25C) - redorange, red, photo red V 2.2 2.6 LED junction temperature C 150 Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 2 XLamp (R) XQ-E LED Flux Characteristics - High Density White (TJ=85C) The following table provides several base order codes for XLamp XQ-E High Density white LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document. CCT Range Color Cool White 70-CRI White Neutral White Warm White 80-CRI White 90-CRI White Minimum Maximum 5000 K 8300 K 3700 K 3700 K 2700 K 2700 K 2850K 8300 K 5300 K 3500 K 3500 K 3000 K Minimum Luminous Flux (lm) @ 350mA Calculated Minimum Luminous Flux (lm)** @ 85C Group Flux (lm) @ 85C Flux (lm) @ 25C* 700mA 1.0A R3 122 141 210 270 Order Code XQEAWT-00-0000-00000LFE1 R2 114 132 196 252 XQEAWT-00-0000-00000LEE1 R3 122 141 210 270 XQEAWT-00-0000-00000BFE1 R2 114 132 196 252 XQEAWT-00-0000-00000BEE1 R2 114 132 196 252 XQEAWT-00-0000-00000LEE4 Q5 107 124 184 237 XQEAWT-00-0000-00000LDE4 Q4 100 116 172 221 XQEAWT-00-0000-00000LCE4 Q5 107 124 184 237 XQEAWT-00-0000-00000LDE7 Q4 100 116 172 221 XQEAWT-00-0000-00000LCE7 Q3 93.9 109 162 208 XQEAWT-00-0000-00000LBE7 Q2 87.4 101 150 193 XQEAWT-00-0000-00000LAE7 Q5 107 124 184 237 XQEAWT-00-0000-00000HDE7 Q4 100 116 172 221 XQEAWT-00-0000-00000HCE7 Q3 93.9 109 162 208 XQEAWT-00-0000-00000HBE7 Q2 87.4 101 150 193 XQEAWT-00-0000-00000HAE7 P4 80.6 93.3 139 178 XQEAWT-00-0000-00000U9E7 P3 73.9 85.5 127 163 XQEAWT-00-0000-00000U8E7 P2 67.2 77.8 116 149 XQEAWT-00-0000-00000U7E7 N4 62 71.7 107 137 XQEAWT-00-0000-00000U6E7 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 24). * Typical CRI for Cool White (5000K - 8300K CCT) is 70. * Typical CRI for Neutral White (3700K - 5300K CCT) is 75. * Typical CRI for Warm White (2700K - 3500K CCT) is 80. * Minimum CRI for 70-CRI White is 70. * Minimum CRI for 80-CRI White is 80. * Minimum CRI for 90-CRI White is 90. * Flux values @ 25C are calculated and for reference only. ** Calculated flux values at 700mA and 1A are for reference only. Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 3 XLamp (R) XQ-E LED Flux Characteristics - High Density Color (TJ=25C) The following tables provide several base order codes for XLamp XQ-E High Density color LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document. Dominant Wavelength Range Minimum Color Group Royal Blue D36 DWL (nm) 450 Maximum Group D57 DWL (nm) 465 Dominant Wavelength Range Color Minimum Group Blue B3 DWL (nm) 465 Maximum Group B6 DWL (nm) 485 Dominant Wavelength Range Color Minimum Group Green G2 DWL (nm) 520 Maximum Group G4 DWL (nm) 535 Minimum Radiant Flux (mW) @ 350 mA Order Code Group Flux (mW) 36 (Q) 600 XQEROY-00-0000-000000Q01 35 (P) 575 XQEROY-00-0000-000000P01 34 (N) 550 XQEROY-00-0000-000000N01 33 (M) 525 XQEROY-00-0000-000000M01 32 (L) 500 XQEROY-00-0000-000000L01 31 (K) 475 XQEROY-00-0000-000000K01 30 (J) 450 XQEROY-00-0000-000000J01 Minimum Luminous Flux (lm) @ 350 mA Order Code Group Flux (lm) M3 45.7 XQEBLU-00-0000-000000301 M2 39.8 XQEBLU-00-0000-000000201 K3 35.2 XQEBLU-00-0000-000000Z01 K2 30.6 XQEBLU-00-0000-000000Y01 Minimum Luminous Flux (lm) @ 350 mA Order Code Group Flux (lm) R2 114 XQEGRN-00-0000-000000E01 Q5 107 XQEGRN-00-0000-000000D01 Q4 100 XQEGRN-00-0000-000000C01 Q3 93.9 XQEGRN-00-0000-000000B01 Note * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 24). Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 4 XLamp (R) XQ-E LED Flux Characteristics - High Density Color (TJ=25C) - Continued Color Minimum Luminous Flux (lm) @ 350mA Color Bin PC Amber Flux (lm) @ 25C* P4 80.6 XQEAPA-00-0000-000000901 P3 73.9 XQEAPA-00-0000-000000801 Y2 Dominant Wavelength Range Color Minimum DWL (nm) Group RedOrange O3 610 Maximum DWL (nm) Group O4 620 Dominant Wavelength Range Color Minimum DWL (nm) Group Red R2 620 Maximum DWL (nm) Group R3 630 Peak Wavelength Range Min. Color Photo Red Order Code Group Minimum Luminous Flux (lm) @ 350mA Group Flux (lm) Q3 93.9 XQERDO-00-0000-000000B01 Q2 87.4 XQERDO-00-0000-000000A01 P4 80.6 XQERDO-00-0000-000000901 P3 73.9 XQERDO-00-0000-000000801 P2 67.2 XQERDO-00-0000-000000701 Minimum Luminous Flux (lm) @ 350mA Group PWL (nm) Group PWL (nm) P2 650 P5 670 Order Code Group Flux (lm) P3 73.9 XQERED-00-0000-000000801 P2 67.2 XQERED-00-0000-000000701 N4 62 XQERED-00-0000-000000601 N3 56.8 XQERED-00-0000-000000501 Minimum Radiant Flux (mW) @ 350mA Max. Order Code Order Code Group Flux (mW) 14 350 XQEPHR-00-0000-000000901 13 300 XQEPHR-00-0000-000000801 Note * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 24). Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 5 XLamp (R) XQ-E LED Flux Characteristics - High Intensity White (TJ=85C) The following table provides several base order codes for XLamp XQ-E High Intensity white LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document. CCT Range Color Cool White 70-CRI White Neutral White Warm White 80-CRI White 90-CRI White Minimum Maximum 5000 K 8300 K 3700 K 3700 K 2700 K 2700 K 2850K 8300 K 5300 K 3500 K 3500 K 3000 K Minimum Luminous Flux (lm) @ 350mA Calculated Minimum Luminous Flux (lm)** @ 85C Group Flux (lm) @ 85C Flux (lm) @ 25C* 700mA 1.0A R3 122 136 213 276 Order Code XQEAWT-H0-0000-00000LFE1 R2 114 127 199 258 XQEAWT-H0-0000-00000LEE1 R3 122 136 213 276 XQEAWT-H0-0000-00000BFE1 R2 114 127 199 258 XQEAWT-H0-0000-00000BEE1 R2 114 127 199 258 XQEAWT-H0-0000-00000LEE4 Q5 107 119 187 242 XQEAWT-H0-0000-00000LDE4 Q4 100 111 175 226 XQEAWT-H0-0000-00000LCE4 Q5 107 119 187 242 XQEAWT-H0-0000-00000LDE7 Q4 100 111 175 226 XQEAWT-H0-0000-00000LCE7 Q3 93.9 105 164 213 XQEAWT-H0-0000-00000LBE7 Q5 107 119 187 242 XQEAWT-H0-0000-00000HDE7 Q4 100 111 175 226 XQEAWT-H0-0000-00000HCE7 Q3 93.9 105 164 213 XQEAWT-H0-0000-00000HBE7 P4 80.6 89.9 141 182 XQEAWT-H0-0000-00000U9E7 P3 73.9 82.4 129 167 XQEAWT-H0-0000-00000U8E7 P2 67.2 74.9 117 152 XQEAWT-H0-0000-00000U7E7 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 24). * Typical CRI for Cool White (5000K - 8300K CCT) is 70. * Typical CRI for Neutral White (3700K - 5300K CCT) is 75. * Typical CRI for Warm White (2700K - 3500K CCT) is 80. * Minimum CRI for 70-CRI White is 70. * Minimum CRI for 80-CRI White is 80. * Minimum CRI for 90-CRI White is 90. * Flux values @ 25C are calculated and for reference only. ** Calculated flux values at 700mA and 1A are for reference only. Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 6 XLamp (R) XQ-E LED Flux Characteristics - High Intensity Color (TJ=25C) The following tables provide several base order codes for XLamp XQ-E High Intensity color LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document. Dominant Wavelength Range Color Minimum DWL (nm) Group Royal Blue Maximum D36 DWL (nm) Group 450 D57 465 Dominant Wavelength Range Color Minimum DWL (nm) Group Blue Maximum B3 DWL (nm) Group 465 B6 485 Dominant Wavelength Range Color Minimum Group Green G2 Color PC Amber Maximum DWL (nm) Group 520 G4 Color Bin Y2 DWL (nm) 535 Minimum Radiant Flux (mW) @ 350 mA Order Code Group Flux (mW) 35 (P) 575 XQEROY-H0-0000-000000P01 34 (N) 550 XQEROY-H0-0000-000000N01 33 (M) 525 XQEROY-H0-0000-000000M01 Minimum Luminous Flux (lm) @ 350 mA Order Code Group Flux (lm) M2 39.8 XQEBLU-H0-0000-000000201 K3 35.2 XQEBLU-H0-0000-000000Z01 K2 30.6 XQEBLU-H0-0000-000000Y01 Minimum Luminous Flux (lm) @ 350 mA Order Code Group Flux (lm) Q5 107 XQEGRN-H0-0000-000000D01 Q4 100 XQEGRN-H0-0000-000000C01 Q3 93.9 XQEGRN-H0-0000-000000B01 Q2 87.4 XQEGRN-H0-0000-000000A01 P4 80.6 XQEGRN-H0-0000-000000901 Minimum Luminous Flux (lm) @ 350mA Order Code Group Flux (lm) @ 25C* P3 73.9 XQEAPA-H0-0000-000000801 P2 67.2 XQEAPA-H0-0000-000000701 Note * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 24). Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 7 XLamp (R) XQ-E LED Flux Characteristics - High Intensity Color (TJ=25C) - Continued Dominant Wavelength Range Color Minimum Group RedOrange O3 DWL (nm) 610 Maximum Group O4 DWL (nm) 620 Dominant Wavelength Range Color Red Minimum Maximum Group DWL (nm) Group DWL (nm) R2 620 R3 630 Minimum Luminous Flux (lm) @ 350mA Order Code Group Flux (lm) P3 73.9 XQERDO-H0-0000-000000801 P2 67.2 XQERDO-H0-0000-000000701 N4 62 XQERDO-H0-0000-000000601 Minimum Luminous Flux (lm) @ 350mA Order Code Group Flux (lm) N2 51.7 XQERED-H0-0000-000000401 M3 45.7 XQERED-H0-0000-000000301 Note * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 24). Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 8 XLamp (R) XQ-E LED Relative Spectral Power Relative Spectral Power Distribution high density High Density 100% Relative Radiant Power 80% 60% 3000 K, 80 CRI 40% 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Spectral Power high density High Density Color 100% Relative Radiant Power 80% Royal Blue Blue 60% Green PC Amber 40% Red-Orange Red Photo Red 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 9 XLamp (R) XQ-E LED Relative Spectral Power Relative Spectral Power Distribution - Continued high intensity High Intensity 100% Relative Radiant Power 80% 60% 3000 K, 80 CRI 40% 20% 0% 380 430 480 Relative Spectral Power 530 580 630 680 730 780 Wavelength (nm) high intensity High Intensity Color 100% Relative Radiant Power 80% Royal Blue Blue 60% Green PC Amber 40% Red-Orange Red 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 10 XLamp (R) XQ-E LED Relative Flux Output vs. Junction Temperature Relative Flux vs. Junction Temperature (IF = 350mA) high density High Density 120% Relative Luminous Flux 100% 80% 60% White 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Relative Flux Output vs. Junction Temperature high density High Density Color 120% Relative Radiant Flux 100% 80% Royal Blue 60% Photo Red 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 11 XLamp (R) XQ-E LED Relative Flux Output vs. Junction Temperature Relative Flux Junction Temperature (IF = 350mA) - Continued highvs. density High Density Color 120% Relative Luminous Flux 100% Blue 80% Green 60% PC Amber Red-Orange 40% Red 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Relative Flux Output vs. Junction Temperature high intensity High Intensity 120% Relative Luminous Flux 100% 80% 60% White 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 12 XLamp (R) XQ-E LED Relative Flux Output vs. Junction Temperature Relative Flux vs. Junction Temperature (IF = 350mA) - Continued high intensity High Intensity Color 120% Relative Radiant Flux 100% 80% Royal Blue 60% 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Relative Flux Output vs. Junction Temperature high intensity High Intensity Color 120% Relative Luminous Flux 100% Blue 80% Green PC Amber 60% Red-Orange Red 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 13 XLamp (R) XQ-E LED Electrical Characteristics (Tj = 85C) high density Electrical Characteristics (TJ = 85C) High Density Forward Current (mA) 1000 800 600 White 400 200 0 1.90 2.10 2.30 2.50 2.70 2.90 Electrical CharacteristicsForward (Tj =Voltage 85C) (V) 3.10 3.30 3.50 3.70 high density High Density Color Forward Current (mA) 1000 800 Royal Blue, Blue 600 Green PC Amber 400 Red-Orange, Red, Photo Red 200 0 1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70 Forward Voltage (V) Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 14 XLamp (R) XQ-E LED Electrical Characteristics (Tj = 85C) high intensity Electrical Characteristics (TJ = 25C) - Continued High Intensity 1000 Forward Current (mA) 800 600 White 400 200 0 1.90 2.10 2.30 2.50 2.70 2.90 Electrical CharacteristicsForward (Tj =Voltage 85C) (V) 3.10 3.30 3.50 3.70 high intensity High Intensity Color Forward Current (mA) 1000 800 Royal Blue, Blue 600 Green PC Amber 400 Red-Orange, Red 200 0 1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70 Forward Voltage (V) Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 15 XLamp (R) XQ-E LED Relative Intensity vs. Current (Tj = 85C) density Relativehigh Flux vs. Current (TJ = 85C) High Density 250% Relative Luminous Flux 200% 150% White 100% 50% 0% 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Relative Intensity vs. Current (Tj = 85C) high density High Density Color 300% Relative Radiant Flux 250% 200% Royal Blue 150% Photo Red 100% 50% 0% 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 16 XLamp (R) XQ-E LED Intensity(Tvs. Current (Tj = 85C) Relative Relative Flux vs. Current = 25C) - Continued J high density High Density Color 300% Relative Luminous Flux 250% 200% Blue Green PC Amber 150% Red-Orange Red 100% 50% 0% 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Relative Intensity vs. Current (Tj = 85C) high intensity High Intensity 250% Relative Luminous Flux 200% 150% White 100% 50% 0% 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 17 XLamp (R) XQ-E LED Intensity(Tvs. Current (Tj = 85C) RelativeRelative Flux vs. Current = 25C) - Continued J high intensity High Intensity Color 250% Relative Radiant Flux 200% 150% Royal Blue 100% 50% 0% 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Relative Intensity vs. Current (Tj = 85C) high intensity High Intensity Color 300% Relative Luminous Flux 250% 200% Blue Green 150% PC Amber Red-Orange Red 100% 50% 0% 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 18 XLamp (R) XQ-E LED Typical Spatial Typical Spatial Distribution high density Radiation Pattern-white High Density 100% Relative Luminous Intensity 80% 60% White 40% 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Typical Spatial Radiation Pattern-royal blue, blue, green, amber, red-orange, red Angle () high density High Density Color 100% Relative Luminous Intensity 80% Royal Blue, Blue, Green 60% PC Amber 40% Red-Orange, Red, Photo Red 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle () Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 19 XLamp (R) XQ-E LED Typical Spatial Radiation Pattern-white Typical Spatial Distribution - Continued high intensity High Intensity 100% Relative Luminous Intensity 80% 60% White 40% 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle () Typical Spatial Radiation Pattern-royal blue, blue, green, amber, red-orange, red high intensity High Intensity Color 100% Relative Luminous Intensity 80% Royal Blue, Blue, Green 60% PC Amber 40% Red-Orange, Red 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle () Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 20 XLamp (R) XQ-E LED Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. Thermal Design - white Thermal Design - royal blue, blue highHigh density &Density high intensity high density & high intensity 1200 1200 1000 1000 Maximum Current (mA) Maximum Current (mA) WhiteRoyal Blue, Blue 800 600 Rj-a = 10C/W 400 Rj-a = 15C/W 600 400 Rj-a = 10C/W Rj-a = 15C/W Rj-a = 20C/W 200 800 200 Rj-a = 20C/W Rj-a = 25C/W 0 Rj-a = 25C/W 0 0 20 40 60 80 100 Thermal Design - green Ambient Temperature (C) 120 140 160 0 20 40 60 80 40 60 80 100 120 140 160 60 80 100 120 140 160 Thermal Design - PC amber Ambient Temperature (C) 100 120 140 160 high density & high intensity high density 1200 1200 1000 1000 Maximum Current (mA) Maximum Current (mA) GreenPC Amber 800 600 400 Rj-a = 15C/W Rj-a = 20C/W 200 800 600 400 Rj-a = 15C/W Rj-a = 20C/W 200 Rj-a = 25C/W Rj-a = 25C/W Rj-a = 30C/W 0 0 20 Rj-a = 30C/W 40 60 80 100 120 140 0 160 0 20 Ambient Temperature (C) Thermal Design - photo red Ambient Temperature (C) Thermal Design - red-orange, red high density high density & high intensity 1200 1200 1000 1000 Maximum Current (mA) Maximum Current (mA) Red-Orange, RedPhoto Red 800 600 400 Rj-a = 10C/W Rj-a = 15C/W 600 400 Rj-a = 10C/W Rj-a = 15C/W Rj-a = 20C/W 200 800 Rj-a = 20C/W 200 Rj-a = 25C/W 0 0 20 Rj-a = 25C/W 40 60 80 Ambient Temperature (C) 100 120 140 160 0 0 20 40 Ambient Temperature (C) Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 21 XLamp (R) XQ-E LED Thermal Design - Continued The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. Thermal Design - white Thermal Design - royal blue, blue highHigh density &Intensity high intensity high density & high intensity 1200 1200 1000 1000 Maximum Current (mA) Maximum Current (mA) WhiteRoyal Blue, Blue 800 600 Rj-a = 10C/W 400 Rj-a = 15C/W 800 600 400 Rj-a = 15C/W Rj-a = 20C/W 200 Rj-a = 10C/W 200 Rj-a = 20C/W Rj-a = 25C/W 0 Rj-a = 25C/W 0 0 20 40 Thermal Design - green high intensity 60 80 100 Ambient Temperature (C) 120 140 160 0 20 40 60 80 100 120 140 60 80 100 120 140 Thermal Design - PC amber Ambient Temperature (C) 160 high density & high intensity 1200 1200 1000 1000 Maximum Current (mA) Maximum Current (mA) GreenPC Amber 800 600 400 Rj-a = 15C/W Rj-a = 20C/W 200 Rj-a = 25C/W 800 600 400 Rj-a = 15C/W Rj-a = 20C/W 200 Rj-a = 25C/W Rj-a = 30C/W 0 0 20 Rj-a = 30C/W 40 60 80 100 120 140 0 160 Ambient Temperature (C) 0 20 40 160 Ambient Temperature (C) Thermal Design - red-orange, red high density & high intensity Red-Orange, Red 1200 Maximum Current (mA) 1000 800 600 400 Rj-a = 10C/W Rj-a = 15C/W Rj-a = 20C/W 200 Rj-a = 25C/W 0 0 20 40 60 80 Ambient Temperature (C) 100 120 140 160 Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 22 XLamp (R) XQ-E LED Reflow Soldering Characteristics In testing, Cree has found XLamp XQ-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25C to Peak IPC/JEDEC J-STD-020C Time Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Lead-Free Solder 1.2C/second Preheat: Temperature Min (Tsmin) 120 C Preheat: Temperature Max (Tsmax) 170 C Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) 65-150 seconds 217 C 45-90 seconds 235 - 245 C Time Within 5C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 C/second Time 25C to Peak Temperature 4 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 23 XLamp (R) XQ-E LED Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree's control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. PreRelease Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree's pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree's lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XQ-E LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of 30 C/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 24 XLamp (R) XQ-E LED Notes - Continued UL(R) Recognized Component Level 1 enclosure consideration. The LED package or a portion thereof has not been investigated as a fire enclosure or a fire and electrical enclosure per ANSI/UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 25 XLamp (R) XQ-E LED Mechanical Dimensions Thermal vias, if present, are not shown on these drawings. 6 5 5 5 4 NOTICE CE DENTIAL. THISAND PLOT AND THE INFORMATION L. THIS PLOT THE INFORMATION THE INFORMATION WITHIN ARE THE PROPRIETARY N ARE THE PROPRIETARY AND AND ETARY AND AL INFORMATION OF INC. CREE, INC.PLOT THIS PLOT ORMATION CREE, THIS E, INC. THISOF PLOT COPIED, REPRODUCED OR DISCLOSED TO ANY D, REPRODUCED OR DISCLOSED TO ANY R DISCLOSED TO ANY High Density ZED PERSON THE WITHOUT WRITTEN CONSENT RSON THE WITHOUT WRITTEN CONSENT CONSENT 4 1.60 2 REVISONS All dimensions in mm. .38 Optical Reference R.936 R.936 .38 .60 1.60 1.50 1.50 1.60 Top View 1.60 1.60 Side View .30 3.30 1.60 1.60 1.60 4 4 .30 3.30 3.30 OPTICAL REFERENCE 1.60 3 2 1 REVISONS REVISONS REV DESCRIPTION DESCRIPTION BY DAT B ANODE NOTE ADDED ANODE AND8/6/ TEX ADDED AND TEXT NOTEDC 2 REV B .30 Optical Reference OPTICAL REFERENCE SOLDER PAD REFERENCE 1.50 .60 PAD SOLDER SOLDER PAD REFERENCE REFERENCE .60 Anode (+) 1.50 1.50 Optical OPTICAL REFERENCE Reference .80 .10 Top View ECOMMENDED PC SOLDER BOARD SOLDER PAD NDED PAD ER PADPC BOARD 3.300 .30 Bottom View 3 1.50 .30 1.60 .60 Notch is onNOTCH IS O cathode (-)CATHODE(side 1.50 .30 1.50 .65 .60 .44 .44 .44 OPTICAL REFERENCE .60 .60 .60 R.936 Optical Reference OPTICAL REFERENCE REFERENCE OPTICAL REFERENCE OPTICAL 1.60 .65 2 1.60 REFERENCE REFERENCE .38 OPTICAL REFERENCE OPTICALOPTICAL 1.60 2 1 RE REV REV REV BYDE Measurement tolerances unless indicatedDESCRIPTION otherwise: .13 mmDESCRIPT A Init A Release Initial DDS Relea A Initial B UPDATED B UPDATED OVERALL DOVER CCO B UPDATED OVERALL COMPONENT HEIGHT C REF. ADDED OPTICA ADDED DC C ADDEDCOPTICAL 1 D XQE/XQA CHANGED HEIGHT CHANGED HEIGHT TODC BLEN D CHANGED HEIGHTDTO BLEND TOGETHE XQ-E High Density 1.60 3 3 3 XQEAWT-0x-xxxx-xxxxxxxxx 6 5 6 5 NOTICE NOTICE High Intensity 1.50 1.50 CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION ENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION CREE, INC. THIS PLOT AL INFORMATION OF CREE, INC.OF THIS PLOT XQEAWT-Hx-xxxx-xxxxxxxxx MAY NOT BE COPIED, REPRODUCED ORTO DISCLOSED TO ANY COPIED, REPRODUCED OR DISCLOSED ANY UNAUTHORIZED PERSON THE WITHOUT WRITTEN CONSENT ED PERSON THE WITHOUT WRITTEN CONSENT OF CREE INC. XQ-E.30 High Intensity .30 60 4 .80 .10 .30 ALL DIMENSIONS NOTED .13MM UNLES DIMENSIONS ARE ARE .13MM UNLESS OTHER ALL DIMENSIONS ARE ALL .13MM UNLESS OTHERWIDE Bottom View DAT DRAWN DATE BY DRAWN BY DATEOTHERWISE DRAWN BY SPECIFIED UNLESS UNLESS OTHERWISE SPECIFIED UNLESS OTHERWISE SPECIFIED 46 Seibel 7/19 Seibel Seibel DIMENSIONS 7/19/13 ARE IN D.7/19/13 ARE IN D. DIMENSIONS ARE IN D.DIMENSIONS Du CHECK CHECK DATE CHECK DATE MILLIMETERS AND AFTER FINISH. DAT MILLIMETERS AND AFTER FINISH. MILLIMETERS AND AFTER FINISH. Ph . UNLESS -- ---Fa -- SPECIFIED: TOLERANCE UNLESS SPECIFIED: TOLERANCE UNLESS SPECIFIED: -- TOLERANCE -.XX .25 .XX DATE .25 .XX .25 APPROVED DATE DAT APPROVED APPROVED RECOMMENDED TRACE LAYOUT RECOMMENDED RECOMMENDED TRACE LAYOUT 1.500TRACE LAYOUT 1.500 .XXXTITLE .125 .XXX7/19/13 .125 .XXX .125 Nevins TITL 7/19 J. Nevins X .5J. NevinsJ. 7/19/13 X .5 XTHIRD .5 PROJECTION THIRD PROJECTION THIRD ANGLE PROJECTION (R) ANGLE (R)ANGLE XQE_XQA MATERIAL MATERIAL MATERIAL Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and XLamp are registered trademarks and the Cree logo is a trademark ofOUTLINE FOR SHEET METAL PARTS ONLY FOR SHEET METAL PARTS ONLY FOR SHEET METAL PARTS ONLY .300 .300 (R) Cree, Inc. UL and the UR logo are registered trademarks of UL LLC. .X SIZE 1.5 .X 1.5 .X 1.5 DRAWING NO. -- SIZE --- .75 .XX .75 .XX .XX .75 .XXXFINISH .25 .XXX .25 .XXX .25 FINAL PROTECTI FINAL PROTECTIVE FINIS FINAL PROTECTIVE 2610-00035 C 26 X C .5 X .5 X .5 SCAL SCALE SH 1.6 1.6 1.6 SURFACE FINISH: --45 SURFACE FINISH: SURFACE FINISH: -45.000 .65 .65 3.300 3.300 Side View .30 1.60 1.60 XLamp (R) XQ-E LED C .44 .44 C OPTICAL REFERENCE OPTICAL REFERENCE 1.60 1.60 Mechanical Dimensions - Continued High Density & High Intensity 1.50 1.50 .30 .30 .65 .65 B Solder pad SOLDER PAD SOLDER PAD reference REFERENCE REFERENCE .30 .30 B 3.30 3.30 1.60 1.60 1.60 1.60 Recommended PCB solder pad A ALL D ALL RECOMMENDED PC BOARD SOLDER PAD RECOMMENDED PC BOARD SOLDER PAD 3.300 3.300 A UNL UD MILL M TOL T Recommended trace layout RECOMMENDED TRACE LAYOUT RECOMMENDED TRACE LAYOUT 6 6 5 5 4 4 THIRD ANGLE PROJECTI FOR THIRD ANGLE PROJEC F 3 Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 27 3 SUS 5 4 3 2 1 REVISONS E INFORMATION RY AND NC. THIS PLOT DISCLOSED TO ANY WRITTEN CONSENT REV BY DESCRIPTION DATE APP'D XLamp (R) XQ-E LED Tape and Reel D All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. Except as noted, all dimensions in mm [in]. Measurement tolerances unless indicated otherwise: .xx = .10 mm High Density XQEAWT-0x-xxxx-xxxxxxxxx XQ-E High Density C 1.500 +.10 -.00 4.000 CATHODE SIDE 1.750 A 1.65 8.000 NOMINAL 8.30 MAX 1.85 1.000 2.000 A 3.50 .10 .30 .10 ANODE SIDE B High Intensity XQEAWT-Hx-xxxx-xxxxxxxxx XQ-E High Intensity Ao Ao Bo Bo Ko Ko O1.50 O1.50 +.10/-.00 +.10/-.00 [+.0039/-.0000] [+.0039/-.0000]REFERENCE VENDOR PART NUMBER 021142 4.00 4.00 [.157] [.157] Po Po 2.00 2.00 [.079] [.079] P2 P2 1.75 1.75 [.069] [.069] E2 E2 CATHODE CATHODE SIDE SIDE THIRD ANGLE PROJECTION mulative tolerance 0.2mm UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX .25 .XXX .125 X .5 DRAWN BY D. CRONIN DATE 4600 Silicon Drive Durham, N.C 27703 5/31/12 CHECK DATE APPROVED DATE Phone (919) 313-5300 Fax (919) 313-5558 TITLE 8.00 8.00 [.315] [.315] FOR SHEET METAL PARTS ONLY .X 1.5 NOMINAL NOMINAL 3.50 F 3.50 [.138] [.138] F .XX .75 .XXX .25 8.30 [.327] [.327] X .5 6.25 6.25 8.30 1.6 MAX MAX SURFACE FINISH: [.246] [.246] W W 2 O1.00 O1.00 E2 E2 [.039] [.039] D1 D1 MATERIAL SIZE FINAL PROTECTIVE FINISH 5 4 3 4.00 4.00 [.157] [.157] PP SCALE 1.85 1.85 [.073] [.073] Bo BoXPQ Carrier Tape, 1.7X1.7 3.0 3.0 C REV. DRAWING NO. 2402-00023 SHEET 4.000 A A OF 1 ANODE ANODE SIDE SIDE 1.98 1.98 [.078] [.078] 3.0 3.0 4.00 [.157] Po 2.00 [.079] P2 POCKET POCKET SIZE SIZE 1.85 1.85 mm mm [.073"] [.073"] 1.85 1.85 mm mm [.073"] [.073"] 1.20 1.20 mm mm [.047"] [.047"] .30 .30 [.012] [.012] TT 1.20 1.20 [.047] [.047] Ko Ko O1.50 +.10/-.00 [+.0039/-.0000] 1.85 1.85 [.073] [.073] Ao Ao CATHODE SIDE Ao Bo Ko POCKET SIZE 1.85 mm [.073"] 1.85 mm [.073"] 1.20 mm [.047"] 1.75 [.069] E2 [.073] of Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo1.85 is a trademark Bo Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 8.00 [.315] 3.50 [.138] F NOMINAL 8.30 [.327] 6.25 MAX [.246] 3.0 28 1 /1 XLamp (R) XQ-E LED Tape and Reel - Continued High Density & High Intensity User Feed Direction END START Trailer 160 mm (min) of empty pockets sealed with tape (20 pockets min.) Loaded Pockets (XQ-E High Density - 2,000 Lamps XQ-E High Intensity - 3,000 Lamps) Leader 400 mm (min) of empty pockets with at least 100 mm sealed by tape (50 empty pockets min.) User Feed Direction Cover Tape Pocket Tape 13mm 7" Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 29 XLamp (R) XQ-E LED Packaging The diagrams below show the packaging and labels Cree uses to ship XLamp XQ-E LEDs. XLamp XQ-E LEDs are shipped in tape loaded on a reel. Each box contains only one reel in a moisture barrier bag. Unpackaged Reel Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Label CREE Binwith Code Cree Bin & Barcode LabelLot # Code, Qty, Label with Cree Bin Code, Quantity, Reel ID Label with Cree Bin Label with Customer P/N, Qty,Qty, Lot #, Lot PO # # Code, Packaged Reel Patent Label Label with Customer Order Label with Cree Order Code, Code, Qty, Reel ID, PO # Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Patent Label (on bottom of box) Copyright (c) 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 30