Specification Tyco Electronics Control Drawing Raychem iN a) Part as supplied. 204W511 ft H DIA - - - J DIA b) Part after unrestricted recovery. JO DIMENSIONS in millimetres {in inches, for reference} H J P R S T JO HW JW Part No. Min Max Min Max +10% 10% +10% 10% +10% 20% 420% fo b fo b b b b b b b b 204W511 24 9.2 16 2.8 38 21 3.0 1.0 10 1.6 0.9 {0,94} {0.36} {0,63} {0.11} {1.50} {0.83} {0.12} {0.04} {0.39} {0.06} {0.04} Copyright C!) The copyright in this drawing is the property of Tyco Electronics UK Ltd. The drawing is issued on the condition that it is not copied, reproduced or disclosed to a third party, either in whole or in part without the prior written consent of Tyco Electronics UK Ltd. Drawn A.LILLEY. Checked Issue 1 Date September 2008Conforms to ISO Recommendations 3rd Angle Projection Approval Not to Scale mo Design MKTG. Tech. Page 1 of 2 204WS11 Part Number Specification Raychem Control Drawing ZO4WS511 Issue 1 E.C.R. No. Details of Change Iss. Date (Ordering Information) 204WS1 1-*/*x Adhesive Slash Number Cif required see compatibility chart) Material Dash Number (see compatibility chart) Base Part Number (COMPATIBILITY CHART) Material Dash Number Material Description SPEC Number Coating Slash Number = f / / x / / / ELASTOMER, FLUID RESISTANT RW-2070 /42, /86, 7225 POLYOLEFIN, COMMERCIAL FLEXIBLE | RW-2008 742 NOTES GQ) As supplied dimensions are for uncoated parts, when coating is added entry diameters will reduce by 1.5mm Max. Tyco Electronics UK Ltd. Tyco Electronics Corporation Faraday Road, 300, Constitution Drive, Swindon, Wiltshire, SN3 SHH Menlo Park, CA 934025 EngLand USA Telephone: (01793) 328171 Fax: 572516 Telephone (650) 361-3860 Fax: (650) 361-5579 Cage Code KI010 Cage Code 060390 Page 2 of 2