Pilkor components
Metallized Polyester
PCMT 369
film capacitors
77
MKT RADIAL LACQUERED CAPACITORS (Dipped Type) Pitch 10.0/15.0/22.5/27.5 mm
(reduced pitch ; 7.5mm)
QUICK REFERENCE DATA
Capacitance range (E12 series)
Capacitance tolerance
Rated voltage VRdc
Climatic category
Rated temperature
Maximum application temperature
Reference specification
0.01 to 10㎌
±5%, ±10%
100 V, 250 V, 400 V, 630 V
55/105/56
85℃
105℃
IEC 60384-2
FEATURES
. Low inductive wound cell of Metallized
(PETP) film
. Cell protected by epoxy lacquer
. Radial leads of solder coated wire
. Resistant to solvents and rinsing liquids
APPLICATIONS
. Blocking and coupling
. Bypass and energy reservoir application
Pilkor components
Metallized Polyester
PCMT 369
film capacitors
78
Ordering information
Available versions Product (lmax)
12.5 18.0 26.0 31.0
Code Packing
method C-tol. Lead
Figure
Lead length
& Height
Hole
to hole
( Po) Pitch (P)
1 Loose in box ±10% A lt = 25.0±2.0mm - 10.0 15.0 22.5 27.5
2 Loose in box ± 5% A lt = 25.0±2.0mm - 10.0 15.0 22.5 27.5
3 Loose in box ±10% A lt = 5.0±1.0mm - 10.0 15.0 22.5 27.5
4 Loose in box ± 5% A lt = 5.0±1.0mm - 10.0 15.0 22.5 27.5
A Loose in box ±10% A lt = 25.0±2.0mm - 7.5 7.5 20.0 20.0
B Loose in box ± 5% A lt = 25.0±2.0mm - 7.5 7.5 20.0 20.0
C Loose in box ±10% A lt = 5.0±1.0mm - 7.5 7.5 20.0 20.0
D Loose in box ± 5% A lt = 5.0±1.0mm - 7.5 7.5 20.0 20.0
5 Ammo packing ±10% C H=16mm 12.7mm 10.0 15.0 22.5 27.5
6 Ammo packing ± 5% C H=16mm 12.7mm 10.0 15.0 22.5 27.5
7 Ammo packing ±10% C H=16mm 15.0mm 10.0 15.0 22.5 27.5
8 Ammo packing ± 5% C H=16mm 15.0mm 10.0 15.0 22.5 27.5
E Ammo packing ±10% C H=16mm 12.7mm 7.5 7.5 20.0 20.0
F Ammo packing ± 5% C H=16mm 12.7mm 7.5 7.5 20.0 20.0
G Ammo packing ±10% C H=16mm 15.0mm 7.5 7.5 20.0 20.0
H Ammo packing ± 5% C H=16mm 15.0mm 7.5 7.5 20.0 20.0
K Taped on reel ±10% C H=16mm 15.0mm 10.0 15.0 22.5 27.5
L Taped on reel ± 5% C H=16mm 15.0mm 10.0 15.0 22.5 27.5
M Taped on reel ±10% C H=16mm 15.0mm 7.5 7.5 20.0 20.0
N Taped on reel ± 5% C H=16mm 15.0mm 7.5 7.5 20.0 20.0
P Ammo packing ±10% B H=16mm 15.0mm - 7.5 - -
Q Ammo packing ± 5% B H=16mm 15.0mm - 7.5 - -
Type series Capacitance
PCMT 369 X X XXX Code Voltage
2 100V
4 250V
5 400V
6 630V
k
l
h
F
H
P0
< Figure A >
b
dt
< Figure B >
k
h
lt
P A
l
α
k = 4±1.3mm
0 < α< 50˚
< Figure C >
k
H
l
h
P
Po
Pilkor components
Metallized Polyester
PCMT 369
film capacitors
79
Packaging Information
Loose in box
SMALLEST PACKING QUANTITIES
(SPQ) lt = 25±2.0mm lt = 5±1.0mm
DIMENSIONS SPQ SPQ
4.5 x 14.5 x 12.5
4.5 x 15.5 x 12.5
4.5 x 16.5 x 12.5
5.0 x 15.0 x 12.5
5.0 x 15.5 x 12.5
5.0 x 16.0 x 12.5
5.0 x 16.5 x 12.5
5.0 x 17.0 x 12.5
5.5 x 15.0 x 12.5
5.5 x 15.5 x 12.5
5.5 x 16.0 x 12.5
5.5 x 16.5 x 12.5
5.5 x 17.0 x 12.5
6.0 x 16.0 x 12.5
6.0 x 17.0 x 12.5
6.5 x 16.0 x 12.5
6.5 x 16.5 x 12.5
6.5 x 17.5 x 12.5
7.0 x 16.5 x 12.5
7.0 x 17.0 x 12.5
7.0 x 18.0 x 12.5
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
5.5 x 16.5 x 18.0
6.0 x 15.5 x 18.0
6.0 x 16.0 x 18.0
6.0 x 17.0 x 18.0
6.5 x 16.0 x 18.0
6.5 x 16.5 x 18.0
6.5 x 17.5 x 18.0
7.0 x 16.5 x 18.0
7.0 x 17.0 x 18.0
7.0 x 18.0 x 18.0
7.5 x 17.0 x 18.0
7.5 x 17.5 x 18.0
7.5 x 18.5 x 18.0
8.0 x 18.5 x 18.0
8.0 x 19.0 x 18.0
8.5 x 19.0 x 18.0
9.0 x 19.0 x 18.0
9.0 x 19.5 x 18.0
10.0 x 20.5 x 18.0
10.5 x 21.0 x 18.0
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
Pilkor components
Metallized Polyester
PCMT 369
film capacitors
80
Loose in box
SMALLEST PACKING QUANTITIES
(SPQ) lt = 25±2.0mm lt = 5±1.0mm
DIMENSIONS SPQ SPQ
6.5 x 19.0 x 26.0
6.5 x 20.0 x 26.0
7.0 x 20.0 x 26.0
7.0 x 20.5 x 26.0
7.5 x 20.5 x 26.0
7.5 x 21.0 x 26.0
8.0 x 21.0 x 26.0
8.0 x 21.5 x 26.0
8.0 x 22.0 x 26.0
8.5 x 21.5 x 26.0
8.5 x 22.5 x 26.0
9.0 x 22.0 x 26.0
9.0 x 23.0 x 26.0
9.5 x 22.5 x 26.0
9.5 x 23.5 x 26.0
10.0 x 23.0 x 26.0
10.0 x 24.0 x 26.0
10.5 x 23.5 x 26.0
10.5 x 24.0 x 26.0
10.5 x 24.5 x 26.0
12.0 x 25.0 x 26.0
12.0 x 26.0 x 26.0
13.0 x 26.5 x 26.0
1000
1000
1000
1000
1000
1000
1000
1000
1000
500
500
500
500
500
500
500
500
500
500
500
500
500
500
1000
1000
1000
1000
1000
1000
1000
1000
1000
500
500
500
500
500
500
500
500
500
500
500
500
500
500
10.0 x 24.0 x 31.0
11.0 x 25.0 x 31.0
12.0 x 26.0 x 31.0
13.0 x 26.5 x 31.0
13.5 x 27.0 x 31.0
15.0 x 28.5 x 31.0
250
250
250
250
250
250
250
250
250
250
250
250
Pilkor components
Metallized Polyester
PCMT 369
film capacitors
81
VRdc = 100 V VRac = 63 V~
CATALOGUE NUMBER
PCMT 369 .....
loose in box
C-tol. ± 5%
Cap.
(㎌)
b x h x l
(mm)
Mass
(g)
lt = 25±2.0 lt = 5±1.0
Pitch = 10.0 ± 0.4 mm dt = 0.6 mm +0.06 / -0.05 A = 2.0 +1.0/-0.5 mm
0.39
0.47
0.56
0.68
0.82
1.0
4.5 x 14.5 x 12.5
5.0 x 15.0 x 12.5
5.5 x 15.0 x 12.5
5.5 x 15.5 x 12.5
6.5 x 16.0 x 12.5
7.0 x 16.5 x 12.5
PCMT 369 22394
PCMT 369 22474
PCMT 369 22564
PCMT 369 22684
PCMT 369 22824
PCMT 369 22105
PCMT 369 24394
PCMT 369 24474
PCMT 369 24564
PCMT 369 24684
PCMT 369 24824
PCMT 369 24105
Pitch = 15.0 ± 0.4 mm dt = 0.8 mm +0.08 / -0.05 A = 2.5 +1.0/-0.5 mm
1.2
1.5
1.8
2.2
2.7
3.3
6.0 x 15.5 x 18.0
6.5 x 16.0 x 18.0
7.0 x 16.5 x 18.0
7.5 x 17.0 x 18.0
8.5 x 19.0 x 18.0
9.0 x 19.0 x 18.0
PCMT 369 22125
PCMT 369 22155
PCMT 369 22185
PCMT 369 22225
PCMT 369 22275
PCMT 369 22335
PCMT 369 24125
PCMT 369 24155
PCMT 369 24185
PCMT 369 24225
PCMT 369 24275
PCMT 369 24335
Pitch = 22.5 ± 0.4 mm dt = 0.8 mm +0.08 / -0.05 A = 2.5 +1.0/-0.5 mm
3.9
4.7
5.6
6.8
8.2
10
6.5 x 19.0 x 26.0
7.0 x 20.0 x 26.0
7.5 x 20.5 x 26.0
8.5 x 21.5 x 26.0
9.5 x 22.5 x 26.0
10.5 x 23.5 x 26.0
PCMT 369 22395
PCMT 369 22475
PCMT 369 22565
PCMT 369 22685
PCMT 369 22825
PCMT 369 22106
PCMT 369 24395
PCMT 369 24475
PCMT 369 24565
PCMT 369 24685
PCMT 369 24825
PCMT 369 24106
Pilkor components
Metallized Polyester
PCMT 369
film capacitors
82
VRdc = 250 V VRac = 160 V~
CATALOGUE NUMBER
PCMT 369 .....
loose in box
C-tol. ± 5%
Cap.
(㎌)
b x h x l
(mm)
Mass
(g)
lt = 25±2.0 lt = 5±1.0
Pitch = 10.0 ± 0.4 mm dt = 0.6 mm +0.06 / -0.05 A = 2.0 +1.0/-0.5 mm
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
4.5 x 15.5 x 12.5
4.5 x 15.5 x 12.5
5.0 x 15.5 x 12.5
5.0 x 16.0 x 12.5
5.5 x 16.0 x 12.5
6.0 x 16.0 x 12.5
6.5 x 16.5 x 12.5
7.0 x 17.0 x 12.5
PCMT 369 42104
PCMT 369 42124
PCMT 369 42154
PCMT 369 42184
PCMT 369 42224
PCMT 369 42274
PCMT 369 42334
PCMT 369 42394
PCMT 369 44104
PCMT 369 44124
PCMT 369 44154
PCMT 369 44184
PCMT 369 44224
PCMT 369 44274
PCMT 369 44334
PCMT 369 44394
Pitch = 15.0 ± 0.4 mm dt = 0.8 mm +0.08 / -0.05 A = 2.5 +1.0/-0.5 mm
0.47
0.56
0.68
0.82
1.0
1.2
6.0 x 16.0 x 18.0
6.5 x 16.5 x 18.0
7.0 x 17.0 x 18.0
7.5 x 17.5 x 18.0
8.0 x 18.5 x 18.0
9.0 x 19.0 x 18.0
PCMT 369 42474
PCMT 369 42564
PCMT 369 42684
PCMT 369 42824
PCMT 369 42105
PCMT 369 42125
PCMT 369 44474
PCMT 369 44564
PCMT 369 44684
PCMT 369 44824
PCMT 369 44105
PCMT 369 44125
Pitch = 22.5 ± 0.4 mm dt = 0.8 mm +0.08 / -0.05 A = 2.5 +1.0/-0.5 mm
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.5 x 20.0 x 26.0
7.0 x 20.5 x 26.0
8.0 x 21.0 x 26.0
9.0 x 22.0 x 26.0
10.0 x 23.0 x 26.0
10.5 x 24.0 x 26.0
12.0 x 25.0 x 26.0
13.0 x 26.5 x 26.0
PCMT 369 42155
PCMT 369 42185
PCMT 369 42225
PCMT 369 42275
PCMT 369 42335
PCMT 369 42395
PCMT 369 42475
PCMT 369 42565
PCMT 369 44155
PCMT 369 44185
PCMT 369 44225
PCMT 369 44275
PCMT 369 44335
PCMT 369 44395
PCMT 369 44475
PCMT 369 44565
Pitch = 27.5 ± 0.4 mm dt = 0.8 mm +0.08 / -0.05 A = 2.5 +1.0/-0.5 mm
6.8 13.0 x 26.5 x 31.0 PCMT 369 42685 PCMT 369 44685
Pilkor components
Metallized Polyester
PCMT 369
film capacitors
83
VRdc = 400 V VRac = 220 V~
CATALOGUE NUMBER
PCMT 369 .....
loose in box
C-tol. ± 5%
Cap.
(㎌)
b x h x l
(mm)
Mass
(g)
lt = 25±2.0 lt = 5±1.0
Pitch = 10.0 ± 0.4 mm dt = 0.6 mm +0.06 / -0.05 A = 2.0 +1.0/-0.5 mm
0.039
0.047
0.056
0.068
0.082
0.10
0.12
0.15
5.0 x 16.0 x 12.5
5.5 x 16.5 x 12.5
5.5 x 16.5 x 12.5
5.0 x 15.5 x 12.5
5.5 x 16.0 x 12.5
5.5 x 16.5 x 12.5
6.0 x 17.0 x 12.5
6.5 x 17.5 x 12.5
PCMT 369 52393
PCMT 369 52473
PCMT 369 52563
PCMT 369 52683
PCMT 369 52823
PCMT 369 52104
PCMT 369 52124
PCMT 369 52154
PCMT 369 54393
PCMT 369 54473
PCMT 369 54563
PCMT 369 54683
PCMT 369 54823
PCMT 369 54104
PCMT 369 54124
PCMT 369 54154
Pitch = 15.0 ± 0.4 mm dt = 0.8 mm +0.08 / -0.05 A = 2.5 +1.0/-0.5 mm
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
5.5 x 16.5 x 18.0
6.0 x 17.0 x 18.0
6.5 x 17.5 x 18.0
7.0 x 18.0 x 18.0
7.5 x 18.5 x 18.0
8.0 x 19.0 x 18.0
9.0 x 19.5 x 18.0
10.0 x 20.5 x 18.0
10.5 x 21.0 x 18.0
PCMT 369 52184
PCMT 369 52224
PCMT 369 52274
PCMT 369 52334
PCMT 369 52394
PCMT 369 52474
PCMT 369 52564
PCMT 369 52684
PCMT 369 52824
PCMT 369 54184
PCMT 369 54224
PCMT 369 54274
PCMT 369 54334
PCMT 369 54394
PCMT 369 54474
PCMT 369 54564
PCMT 369 54684
PCMT 369 54824
Pitch = 22.5 ± 0.4 mm dt = 0.8 mm +0.08 / -0.05 A = 2.5 +1.0/-0.5 mm
1.0
1.2
1.5
1.8
2.2
8.0 x 21.5 x 26.0
8.5 x 22.5 x 26.0
9.5 x 23.5 x 26.0
10.5 x 24.5 x 26.0
12.0 x 26.0 x 26.0
PCMT 369 52105
PCMT 369 52125
PCMT 369 52155
PCMT 369 52185
PCMT 369 52225
PCMT 369 54105
PCMT 369 54125
PCMT 369 54155
PCMT 369 54185
PCMT 369 54225
Pitch = 27.5 ± 0.4 mm dt = 0.8 mm +0.08 / -0.05 A = 2.5 +1.0/-0.5 mm
2.7
3.3
3.9
12.0 x 26.0 x 31.0
13.5 x 27.0 x 31.0
15.0 x 28.5 x 31.0
PCMT 369 52275
PCMT 369 52335
PCMT 369 52395
PCMT 369 54275
PCMT 369 54335
PCMT 369 54395
Pilkor components
Metallized Polyester
PCMT 369
film capacitors
84
VRdc = 630 V VRac = 250 V~
CATALOGUE NUMBER
PCMT 369 .....
loose in box
C-tol. ± 5%
Cap.
(㎌)
b x h x l
(mm)
Mass
(g)
lt = 25±2.0 lt = 5±1.0
Pitch = 10.0 ± 0.4 mm dt = 0.6 mm +0.06 / -0.05 A = 2.0 +1.0/-0.5 mm
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
4.5 x 16.5 x 12.5
4.5 x 16.5 x 12.5
4.5 x 16.5 x 12.5
4.5 x 16.5 x 12.5
5.0 x 16.5 x 12.5
5.0 x 17.0 x 12.5
5.0 x 16.5 x 12.5
5.5 x 17.0 x 12.5
6.0 x 17.0 x 12.5
6.5 x 17.5 x 12.5
7.0 x 18.0 x 12.5
PCMT 369 62103
PCMT 369 62123
PCMT 369 62153
PCMT 369 62183
PCMT 369 62223
PCMT 369 62273
PCMT 369 62333
PCMT 369 62393
PCMT 369 62473
PCMT 369 62563
PCMT 369 62683
PCMT 369 64103
PCMT 369 64123
PCMT 369 64153
PCMT 369 64183
PCMT 369 64223
PCMT 369 64273
PCMT 369 64333
PCMT 369 64393
PCMT 369 64473
PCMT 369 64563
PCMT 369 64683
Pitch = 15.0 ± 0.4 mm dt = 0.8 mm +0.08 / -0.05 A = 2.5 +1.0/-0.5 mm
0.082
0.10
0.12
0.15
0.18
0.22
6.0 x 17.0 x 18.0
6.5 x 17.5 x 18.0
6.5 x 17.5 x 18.0
7.0 x 18.0 x 18.0
8.0 x 18.5 x 18.0
8.5 x 19.0 x 18.0
PCMT 369 62823
PCMT 369 62104
PCMT 369 62124
PCMT 369 62154
PCMT 369 62184
PCMT 369 62224
PCMT 369 64823
PCMT 369 64104
PCMT 369 64124
PCMT 369 64154
PCMT 369 64184
PCMT 369 64224
Pitch = 22.5 ± 0.4 mm dt = 0.8 mm +0.08 / -0.05 A = 2.5 +1.0/-0.5 mm
0.27
0.33
0.39
0.47
0.56
0.68
6.5 x 20.0 x 26.0
7.0 x 20.5 x 26.0
7.5 x 21.0 x 26.0
8.0 x 22.0 x 26.0
9.0 x 23.0 x 26.0
10.0 x 24.0 x 26.0
PCMT 369 62274
PCMT 369 62334
PCMT 369 62394
PCMT 369 62474
PCMT 369 62564
PCMT 369 62684
PCMT 369 64274
PCMT 369 64334
PCMT 369 64394
PCMT 369 64474
PCMT 369 64564
PCMT 369 64684
Pitch = 27.5 ± 0.4 mm dt = 0.8 mm +0.08 / -0.05 A = 2.5 +1.0/-0.5 mm
0.82
1.0
1.2
10.0 x 24.0 x 31.0
11.0 x 25.0 x 31.0
12.0 x 26.0 x 31.0
PCMT 369 62824
PCMT 369 62105
PCMT 369 62125
PCMT 369 64824
PCMT 369 64105
PCMT 369 64125
Pilkor components
Metallized Polyester
PCMT 369
film capacitors
85
CONSTRUCTION
Description
. Low-inductive wound cell of metallized polyethyleneterephthalate film
. Protected by a hard, water repellent, solvent resistant epoxy lacquer
. Radial leads, solder-coated.
MOUNTING
NORMAL USE
The capacitors are designed for mounting on printed-wiring boards. The capacitors packed in
bandollers are designed for mounting on printed-wiring boards by means of automatic
insertion machines.
For detailed specifications refer to chapter packaging
SPECIFIED METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK
In order to withstand vibration and shock tests, it must be ensured that the underside of the crimps are
in good contact with the printed-wiring board.
- For pitches of 15 mm the capacitors shall be mechanically fixed by the leads.
- For larger pitches the capacitors shall be mounted in the same way and the body clamped.
RATINGS AND CHARACTERISTICS
Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23±1℃,
an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50±2%.
For reference testing, a conditioning period shall be applied over 96±4 hours by heating the products
in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%.
metallized polyester film
metal spray layer
connecting wire
Pilkor components
Metallized Polyester
PCMT 369
film capacitors
86
CHARACTERISTICS
Dissipation Factor
Insulation Resistance
The insulation resistance is measured after a voltage has been applied for 1 minute ±5 seconds,
the voltage being 100±15V for the 100, 250 and 400V versions and 500±50V for the 630V versions.
Rated voltage Capacitance R between leads (㏁) RC between leads (sec)
100 V C ＞ 0.33㎌ - ＞ 5 000 s
C ≤ 0.33㎌ ＞ 30 000 -
250 V / 400 V / 630 V
C ＞ 0.33㎌ - ＞ 10 000 s
Rated Voltage Pulse Load Slope (dV/dt)R
The maximum pulse load are value valid for pulse voltage equal to the rated voltage. For lower
voltages the given values may be multiplied by VRdc and divided by the applied voltage.
Tangent of loss angle ( x 10-4 )
Rated voltage Capacitance 1 KHz 10 KHz 100 KHz
100 V
0.33㎌≤C ≤ 0.47㎌
0.1㎌ < C ≤ 1.0 ㎌
C > 1.0 ㎌
≤75
≤75
≤75
≤120
≤120
≤150
≤200
-
-
0.1 ㎌ < C ≤ 0.47㎌ ≤75 ≤120 ≤225
250 V
0.47㎌ < C ≤ 6.8 ㎌ ≤75 ≤120 -
C ≤ 0.1 ㎌ ≤75 ≤120 ≤200
0.1 ㎌ < C ≤ 0.47㎌ ≤75 ≤120 ≤225
400 V / 630 V
C > 0.47㎌ ≤75 ≤120 -
Rated pulse load(V/㎲) as a function of lmax
Rated voltage
lmax = 12.5mm lmax = 18.0mm lmax = 26.0mm lmax = 31.0mm
100 V 30 20 20 -
250 V 120 45 20 15
400 V 170 65 30 25
630 V 90 90 35 30
Pilkor components
Metallized Polyester
PCMT 369
film capacitors
87
THE GRAPHS OF CHARACTERISTICS
Capacitance change at 1kHz as a function of frequency ; typical curve
∆ C/C
(%)
2
1
0
-1
-2
-3
10
2
10
3
10
4
10
5
f(Hz)
Capacitance as a function of ambient free air temperature,
measured at 1kHz
,
1V: t
yp
ical curve
∆ C/C
(%) 2
1
0
-1
-2
-3
3
-4
-5
-60 -20 20 60 100 Ta m b(℃)
400V-630V
250V
100V
factor
1.2
-60 -20 0 20 100
Tamb ( ℃)
1.0
0.8
0.6
0.4
0.2
0.0
-40 40 60 80
Multiplying factor as a function of temperature Tangent of loss angle as a function of frequency : typical curve
10
2
10
3
10
4
10
5
f(Hz)
10
1
10
2
10
3
dissipation
factor(X10-4)
Tamb ( ℃)
10
2
10
3
10
4
10
5
-50
RC(S)
0 50 100
RC-product as a function of ambient free air temperature ; typical curve
Pilkor components
Metallized Polyester
PCMT 369
film capacitors
88
MAXIMUM RMS VOLTAGE (SINEWAVE) AS A FUNCTION OF FREQUENCY
103 f(Hz)
104 105
10
2
1
AC
voltage
(V)
100
106
10
AC voltage (RMS value) as a function of frequency
at Tamb≤85℃ for URdc=100V
1.5 ㎌(Imax=12.5mm)
3.9 ㎌(Imax=12.5mm)
10 ㎌(Imax=12.5mm)
AC voltage (RMS value) as a function of frequency
at Tamb≤85℃ for URdc=250V
103 f
(
Hz
)
104 105
1
AC
voltage
(V)
103
106
10
102
102
1.0 ㎌(Imax=12.5mm)
2.2 ㎌(Imax=12.5mm)
10 ㎌(Imax=12.5mm)
AC voltage (RMS value) as a function of frequency
at Tamb≤85℃ for URdc=630V
103 f
(
Hz
)
104 105
1
AC
voltage
(V)
10
3
106
10
10
2
102 107
100 ㎋(Imax=12.5mm)
1.0 ㎌(Imax=26.0mm)
220 ㎋(Imax=18.0mm)
AC voltage (RMS value) as a function of frequency at Tamb≤85℃ for URdc=400V
103 f
(
Hz
)
10
4
10
5
1
AC
voltage
(V)
103
10
102
102
10
6
100 ㎋(Imax=12.5mm)
220 ㎋(Imax=18.0mm)
1.0 ㎌(Imax=26.0mm)
2.2 ㎌(Imax=31.0mm)
Pilkor components
Metallized Polyester
PCMT 369
film capacitors
89
APPLICATION NOTE
To select this capacitor for a certain application, 6 conditions must be checked :
1. The peak voltage (Vp) shall not be greater than the rated DC voltage.
2. The peak-to-peak voltage (Vp-p) shall not be greater than 2√2 times the rated AC voltage to avoid the
ionization inception level.
3. The peak current (Ip) shall not exceed the maximum peak current, defined as maximum voltage
pulse slope (dV/dt) multiplied by the capacitance.
Ip max. = C (dV/dt) max
Or the voltage pulse slope shall not exceed the rated voltage pulse slope. If the pulse voltage is
Lower than the rated voltage, the values of the table may be multiplied by VRdc and divided by the
applied voltage.
4. The dissipated power shall not be greater than the maximum permissible power dissipation
stated above.
5. The free air ambient temperature for the capacitor is not exceeding the category temperature.
6. Since all metallized film capacitors have an intrinsically active flammability risk, it is recommended
that these capacitors should only be used in circuits where the power can be limited to less than
5W to the capacitor should a failure occur.
PRODUCT MARKING
The capacitors are marked in black ink on the side with the following information :
. Rated capacitance code in ㎋ or ㎌
. Tolerance on rated capacitance : J = ±5 % , K = ±10 %
. Rated DC voltage
Example of marking
100n J 250V 220n J 400V
MKT (ME) or 369 MKT
(ME)
Imax = 12.5 mm Imax = 18.0/26.0/31.0 mm
