P320XVF03.0 Product Specification
Rev. 0.0
© Copyright AU Optronics Corp. 2010 All Rights Reserved. Page 1 / 22
Model Name: P320XVF03.0
Issue Date : 2013/05/20
(＊
＊＊
＊)Preliminary Specifications
( )Final Specifications
Customer Signature Date AUO Date
Approved By
_________________________________
Approval By PM Director
Paley Fang
____________________________________
Reviewed By RD Director
Eugene Chen
____________________________________
Reviewed By Project Leader
Mingyu Yu
____________________________________
Note
Prepared By PM
Rafael Lu
____________________________________
P320XVF03.0 Product Specification
Rev. 0.0
© Copyright AU Optronics Corp. 2010 All Rights Reserved. Page 2 / 22
Contents
No
CONTENTS
RECORD OF REVISIONS
1 GENERAL DESCRIPTION
2 ABSOLUTE MAXIMUM RATINGS
3 ELECTRICAL SPECIFICATION
3-1 POWER SPECIFICATIONS
3-2 SIGNAL ELECTRICAL CHARACTERISTICS
3-3 CONNECTOR
3-4 HDMI CONNECTOR PIN ASSIGNMENT
3-5 COLOR INPUT DATA REFERENCE
4 OPTICAL SPECIFICATION
5 MECHANICAL CHARACTERISTICS
6 RELIABILITY TEST ITEMS
7 PACKING
7-1 DEFINITION OF LABEL
7-2 PACKING METHODS
7-3 PALLET AND SHIPMENT INFORMATION
8 PRECAUTION
8-1 MOUNTING PRECAUTIONS
8-2 OPERATING PRECAUTIONS
8-3 ELECTROSTATIC DISCHARGE CONTROL
8-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE
8-5 STORAGE
8-6 HANDLING PRECAUTIONS FOR PROTECT FILM
9 KEYPAD OPERATION
9-1 OPERATING PROCEDURE
9-2 KEYPAD ILLUSTRATION AND FUNCTION
x
P320XVF03.0 Product Specification
Rev. 0.0
© Copyright AU Optronics Corp. 2010 All Rights Reserved. Page 3 / 22
Record of Revision
Version
Date Page Description
0.0 2013/05/20
First release
P320XVF03.0 Product Specification
Rev. 0.0
© Copyright AU Optronics Corp. 2010 All Rights Reserved. Page 4 / 22
1. General Description
This specification applies to the 32 inch Integrated Transparent LCD Module, P320XVF03.0. This module
consists of a TFT LCD panel, a metal frame and a driver board with shield cover. The Module has a TFT active
matrix type liquid crystal panel with 1366 x 768 pixels and displays up to 16.7M colors. The P320XVF03.0 has
been designed to apply HDMI interface for easy use. It is intended to support applications such as shopping
window, exhibition cabinet, vending machine, etc.
* General Information
Items Specification Unit Note
Active Screen Size 31.50 inch
Display Area (H) x (V) mm
Outline Dimension 745.68 (H) x 485.75(V) x 22(D) mm D: T-con cover
8.3mm(without A/D board)
Driver Element a-Si TFT active matrix
Display Colors 8 bit, 16.7M Colors
Number of Pixels 1,366x768 Pixel
Pixel Pitch 0.51075 (H) x 0.51075(W) mm
Pixel Arrangement RGB horizontal stripe
Display Operation Mode Normally Black
Surface Treatment Anti-Glare, 3H Haze=2%
Rotate Function Unachievable Note 1
Display Orientation Signal input with “ABC” Note 2
Note 1: Rotate Function refers to LCD display could be able to rotate.
Note 2: LCD display as below illustrated when signal input with “ABC”.
P320XVF03.0 Product Specification
Rev. 0.0
© Copyright AU Optronics Corp. 2010 All Rights Reserved. Page 5 / 22
2. Absolute Maximum Ratings
The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit
Item Symbol Min Max Unit Conditions
Logic/LCD Drive Voltage V
DD
-0.3 14 [Volt] Note 1
Input Voltage of Signal Vin -0.3 4 [Volt] Note 1
Operating Temperature TOP 0 +50 [
o
C] Note 2
Operating Humidity HOP 10 90 [%RH] Note 2
Storage Temperature TST -20 +60 [
o
C] Note 2
Storage Humidity HST 10 90 [%RH] Note 2
Panel Surface Temperature PST - 65 [
o
C] Note 3
Note 1: Duration:50 msec.
Note 2 : Maximum Wet-Bulb should be 39 and No condensation.
℃
The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures
℃
greater than 40 , the wet bulb temperature must not exceed 39 .
℃ ℃
Note 3: Surface temperature is measured at 50
℃
Dry condition
P320XVF03.0 Product Specification
Rev. 0.0
© Copyright AU Optronics Corp. 2010 All Rights Reserved. Page 6 / 22
3. Electrical Specification
The P320XVF01.0 requires one power input. It is employed to power the LCD electronics and to drive the TFT
array and liquid crystal.
3.1 Power Specifications
Input power specifications are as followings:
3.2 Signal Electrical Characteristics
Input signals shall be HDMI.
It is recommended to refer the specifications of VESA in details.
3.3 Connector
Physical interface is described as follows for the connector on module. These connectors are
capable of accommodating the following signals and will be following components.
HDMI Connector
Manufacturer SINGATRON or compatible
Type Part Number 2HE.51U1.N08
DC Jack
Manufacturer 菱揚精密有限公司 or compatible
Type Part Number HF-DX-00330-AE100ASH1
Symbol Parameter Min Typ Max Unit Conditions
VDD LCD Drive Voltage
10.8 12.0 13.2 [Volt] +/-10%
IDD Input Current - 0.55 0.66 [A] VDD= 12.0V,All white
Pattern, At 60Hz
PDD VDD Power - 6.6 8.8 [Watt] VDD= 12.0V,All white
Pattern, At 60Hz
P320XVF03.0 Product Specification
Rev. 0.0
© Copyright AU Optronics Corp. 2010 All Rights Reserved. Page 7 / 22
3.4 HDMI Connector Pin Assignment
PIN #
NAME
1 HDMI2+
2 HDMI_WP
3 HDMI2-
4 HDMI1+
5 GND
6 HDMI1-
7 HDMI0+
8 GND
9 HDMI0-
10 HDMICK+
11 GND
12 HDMICK-
13 NC
14 GND
15 HDMI_SCL
16 HDMI_SDA
17 GND
18 HDMI_5V1
19 HP_DET_HDMI
1
P320XVF03.0 Product Specification
Rev.0.0
© Copyright AU Optronics Corp. 2013 All Rights Reserved. Page 8 / 22
3.5 Color Input Data Reference
The brightness of each primary color (red, green and blue) is based on the 8 bit gray scale data input for the color;
the higher the binary input, the brighter the color. The table below provides a reference for color versus data input.
Color Data Reference
Input Color Data
RED
MSB LSB
GREEN
MSB LSB
BLUE
MSB LSB
Color
R7
R6
R5
R4
R3
R2
R1
R0
G7
G6
G5
G4
G3
G2
G1
G0
B7
B6
B5
B4
B3
B2
B1
B0
Black 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Red(255) 1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Green(255) 0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
Blue(255) 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
Cyan 0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Magenta 1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
Yellow 1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
Basic
Color
White 1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
RED(000) 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
RED(001) 0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
----
RED(254) 1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
R
RED(255) 1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
GREEN(000) 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
GREEN(001) 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
----
GREEN(254) 0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
G
GREEN(255) 0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
BLUE(000) 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
BLUE(001) 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
----
BLUE(254) 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
B
BLUE(255) 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
P320XVF03.0 Product Specification
Rev.0.0
© Copyright AU Optronics Corp. 2013 All Rights Reserved. Page 9 / 22
4. Optical Specification
Optical characteristics are determined after the unit has been ‘ON’ and stable for approximately 45 minutes in a
dark environment at 25°C. The values specified are at an approximate distance 50cm from the LCD surface at a
viewing angle of φ and θ equal to 0°.
Fig.1 presents additional information concerning the measurement equipment and method.
Values
Parameter Symbol
Condition
Min. Typ. Max
Unit Notes
Contrast Ratio CR 2400 3000 -- 1,2
White Variation δ
WHITE(9P)
-- -- 1.33 1,3
Response Time (G to G)
Tr -- 6.5 -- ms 4
Center Transmittance T%
With AUO Module
6.8 % 1,7
Color Chromaticity 5
Red R
X
0.656
R
Y
0.325
Green G
X
0.273
G
Y
0.591
Blue B
X
0.141
B
Y
0.094
White W
X
0.298
W
Y
With CS-1000T
Standard light source “C”
Typ.-0.03
0.338
Typ.+0.03
Viewing Angle 1,6
x axis, right(φ=0°) θ
r
-- 89 -- degree
x axis, left(φ=180°) θ
l
-- 89 -- degree
y axis, up(φ=90°) θ
u
-- 89 -- degree
y axis, down (φ=270°)
θ
d
With AUO Module
-- 89 -- degree
SR3 or equivalent
1
P320XVF03.0 Product Specification
Rev.0.0
© Copyright AU Optronics Corp. 2013 All Rights Reserved. Page 10 / 22
Note:
1. Contrast Ratio (CR) is defined mathematically as:
Surface Luminance of
L
on5
Contrast Ratio=
Surface Luminance of
L
off5
2. Surface luminance is luminance value at point 5 across the LCD surface 50cm from the surface with all pixels
displaying white. From more information see FIG 2.
3. The variation in surface luminance, δWHITE is defined (center of Screen) as:
δ
WHITE(9P)
= Maximum(L
on1
, L
on2
,…,L
on9
)/ Minimum(L
on1
, L
on2
,…L
on9
)
4. Response time T
γ
is the average time required for display transition by switching the input signal for five
luminance ratio (0%,25%,50%,75%,100% brightness matrix) and is based on F
v
=60Hz to optimize. From more
information see FIG 3.
Target Measured
Response Time 0% 25% 50% 75% 100%
0% 0% to 25% 0% to 50% 0% to 75% 0% to 100%
25% 25% to 0% 25% to 50%
25% to 75%
25% to 100%
50% 50% to 0% 50% to 25%
50% to 75%
50% to 100%
75% 75% to 0% 75% to 25%
75% to 50%
75% to 100%
Start
100% 100% to 0%
100% to 25%
100% to 50%
100% to 75%
5. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined for the
horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For
more information see FIG4.
6. head in 0 degrees vertical angle from mid axis
FIG. 2 Luminance
1
2
3
4
5
6
7
8
H
V
H/6
H/2
V/2 V/6
1
P320XVF03.0 Product Specification
Rev.0.0
© Copyright AU Optronics Corp. 2013 All Rights Reserved. Page 11 / 22
FIG.3 Response Time
The response time is defined as the following figure and shall be measured by switching the input signal for “any
level of grey(bright) “ and “any level of gray(dark)”.
Any level of gray (Bright) Any level of gray (Dark) Any level of gray (Bright)
T
γ
γγ
γ
(R)
0% , 25% , 50%, 75%, 100%
Photodetector
Output
Tim e
T
γ
γγ
γ
(F)
0% , 25%, 50%, 75% , 100%
0% , 25% , 50% , 75%, 100%
FIG.4 Viewing Angle
90%
10%
1
P320XVF03.0 Product Specification
Rev.0.0
© Copyright AU Optronics Corp. 2013 All Rights Reserved. Page 12 / 22
5. Mechanical Characteristics
The contents provide general mechanical characteristics for the model P320XVF03.0. In addition the figures in the
next page are detailed mechanical drawing of the LCD.
Horizontal 745.68mm
Vertical 485.75mm
Outline Dimension
Depth
22mm(T-con cover)
8.3mm(without A/D
board)
Horizontal 702.68mm
Bezel Opening
Vertical 397.25mm
Horizontal 697.6845mm
Active Display Area
Vertical 392.256mm
Weight 2077g (Typ.)
Surface Treatment AG, 3H
1
P320XVF03.0 Product Specification
Rev.0.0
© Copyright AU Optronics Corp. 2013 All Rights Reserved. Page 13 / 22
Front View
1
P320XVF03.0 Product Specification
Rev.0.0
© Copyright AU Optronics Corp. 2013 All Rights Reserved. Page 14 / 22
Back View
1
P320XVF03.0 Product Specification
Rev.0.0
© Copyright AU Optronics Corp. 2013 All Rights Reserved. Page 15 / 22
1
P320XVF03.0 Product Specification
Rev.0.0
© Copyright AU Optronics Corp. 2013 All Rights Reserved. Page 16 / 22
6. Reliability Test Items
Test Item Q’ty Condition
1 High temperature storage test 3 60
℃
, 300hrs
2 Low temperature storage test 3 -20
℃
, 300hrs
3 High temperature operation test 3 50
℃
, 300hrs
4 Low temperature operation test 3 -5
℃
, 300hrs
5 Vibration test (With carton) 5 Random wave (1.04G RMS, 2-200Hz)
20mins/ Per each X,Y,Z axes
6 Drop test (With carton) 5
Height: 61 cm
Direction: 1 corner, 3 edges, 6 flats
(ASTMD5276)
1
P320XVF03.0 Product Specification
Rev.0.0
© Copyright AU Optronics Corp. 2013 All Rights Reserved. Page 17 / 22
7. Packing
7.1 Definition of Label :
A. Panel Label:
*xxxxxxxxxxxx-xxxx*
Green mark description
(1) For Pb Free Product, AUO will add for identification.
(2) For RoHs compatible products, AUO will add RoHS for identification.
Note: The green Mark will be present only when the green documents have been ready by AUO internal green
team. (definition of green design follows the AUO green design checklist.)
B. Carton Label:
AU Optronics
P500HVF01.0
93.32P05.000
QTY
:
5
Panel Unique ID
AUO Internal Use
XXXXX Model NO: P320XVF03.0 XXXXXXX
Manufactured
XX
/
XX
MADE IN
X
XXXX
Fab Location
Week
Year
AUO Internal Use
AUO Internal Use
1
P320XVF03.0 Product Specification
Rev.0.0
© Copyright AU Optronics Corp. 2013 All Rights Reserved. Page 18 / 22
7.2 Packing Methods:
Protect Film
(Front Face) Creped Paper Tape
( 5 ) Pcs Modules
( 5 ) Pcs / 1 Carton
Cushion Set
"H" Tape
Packing Way
：
Panel Top Side Down
Protect Film
(Rear Face) Creped Paper Tape
Anti-Static Bag (Blue)
1
P320XVF03.0 Product Specification
Rev.0.0
© Copyright AU Optronics Corp. 2013 All Rights Reserved. Page 19 / 22
7.3 Pallet and Shipment Information
Specification
Item
Qty. Dimension Weight (kg)
Packing
Remark
Qty.
1
Packing Box 5pcs/1Box
874 x 379 x 596 (mm) Packing Box
5pcs/1Box
2
Pallet 1 1150 x 840 x 132 (mm) Pallet 1
3
Boxes per Pallet 6
1150*840*1192
(mm)
4
Panels per Pallet
30
1150*840*1192
(mm)
5
Pallet after packing
6Box/1Pallet
1150*840*1192 (mm) Pallet after
packing
6Box/1Pallet
1
P320XVF03.0 Product Specification
Rev.0.0
© Copyright AU Optronics Corp. 2013 All Rights Reserved. Page 20 / 22
8. PRECAUTIONS
Please pay attention to the followings when you use this TFT LCD module.
8.1 MOUNTING PRECAUTIONS
(1) You must mount a module using holes arranged in four corners or four sides.
(2) You should consider the mounting structure so that uneven force (ex. twisted stress) is not applied
to module. And the case on which a module is mounted should have sufficient strength so that
external force is not transmitted directly to the module.
(3) Please attach the surface transparent protective plate to the surface in order to protect the polarizer.
Transparent protective plate should have sufficient strength in order to the resist external force.
(4) You should adopt radiation structure to satisfy the temperature specification.
(5) Acetic acid type and chlorine type materials for the cover case are not desirable because the former
generates corrosive gas of attacking the polarizer at high temperature and the latter cause circuit
broken by electro-chemical reaction.
(6) Do not touch, push or rub the exposed polarizer with glass, tweezers or anything harder than HB
pencil lead. And please do not rub with dust clothes with chemical treatment. Do not touch the
surface of polarizer for bare hand or greasy cloth. (Some cosmetics are detrimental to the polarizer.)
(7) When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials
like chamois soaks with petroleum benzene. Normal-hexane is recommended for cleaning the
adhesives used to attach front/ rear polarizer. Do not use acetone, toluene and alcohol because
they cause chemical damage to the polarizer.
(8) Wipe off saliva or water drops as soon as possible. Their long time contact with polarizer causes
deformations and color fading.
(9) Do not open the case because inside circuits do not have sufficient strength.
8.2 OPERATING PRECAUTIONS
(1) The device listed in the product specification sheets was designed and manufactured for TV
application
(2) The spike noise causes the mis-operation of circuits. It should be lower than following voltage:
V=±200mV(Over and under shoot voltage)
(3) Response time depends on the temperature. (In lower temperature, it becomes longer..)
(4) Brightness of LED depends on the temperature. (In lower temperature, it becomes lower.) And in
lower temperature, response time (required time that brightness is stable after turned on) becomes
longer.
(5) Be careful for condensation at sudden temperature change. Condensation makes damage to
polarizer or electrical contacted parts. And after fading condensation, smear or spot will occur.
(6) When fixed patterns are displayed for a long time, remnant image is likely to occur.
(7) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference shall
1
P320XVF03.0 Product Specification
Rev.0.0
© Copyright AU Optronics Corp. 2013 All Rights Reserved. Page 21 / 22
be done by system manufacturers. Grounding and shielding methods may be important to minimize
the interface.
8.3 ELECTROSTATIC DISCHARGE CONTROL
Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain
that treatment persons are connected to ground through wristband etc. And don’t touch interface pin
directly.
8.4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE
Strong light exposure causes degradation of polarizer and color filter.
8.5 STORAGE
When storing modules as spares for a long time, the following precautions are necessary.
(1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the
temperature between 5 and 35 at normal humidity.
℃ ℃
(2) The polarizer surface should not come in contact with any other object. It is recommended that they
be stored in the container in which they were shipped.
8.6 HANDLING PRECAUTIONS FOR PROTECTION FILM
(1) The protection film is attached to the bezel with a small masking tape. When the protection film is
peeled off, static electricity is generated between the film and polarizer. This should be peeled off
slowly and carefully by people who are electrically grounded and with well ion-blown equipment or
in such a condition, etc.
(2) When the module with protection film attached is stored for a long time, sometimes there remains a
very small amount of glue still on the bezel after the protection film is peeled off.
(3) You can remove the glue easily. When the glue remains on the bezel or its vestige is recognized,
please wipe them off with absorbent cotton waste or other soft material like chamois soaked with
normal-hexane.
1
P320XVF03.0 Product Specification
Rev.0.0
© Copyright AU Optronics Corp. 2013 All Rights Reserved. Page 22 / 22
9. Keypad Operation
The Integrated Transparent LCD Module allows the users to adjust the transmittance (Tr) of the middle grey
level. The operation is based on that the signal input (HDMI) is working.
9-1 Keypad Illustration and Function
(a) Menu: Pop up OSD menu or Enter into sub-menu
(b) +: Indicating the cursor movement or OSD manual selection in incremental values
(c) Return: Return to OSD menu
(d) -: Indicating the cursor movement or OSD manual selection in decremental values
(e) Power: Power on/off the module
(f) LED indicator:
9-2 Operating Procedure
Use the keypads on the control board to adjust the OSD
(1) Press “(a)” to pop up the OSD menu.
(2) Press “(a)” to enter the sub-menu.
(3) Press “(b)” or “(d)” to select items (Tr or Reset*).
(4) Press “(a)” to the user setting.
(5) Press “(b)” or “(d)” to adjust.
Note: If Reset is selected, the Tr will be reset to default value.
(a) (b) (c) (d) (e) (f)