CLV1A-FKB-CKMQRNRFHBB79353 - CREE

CLD-CT874.012

PRODUCT FAMILY DATA SHEET

Cree® PLCC4 3 in 1 SMD LED

CLV1A-FKB

WWW.CREE.COM/HB

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

PRODUCT DESCRIPTION

Cree PLCC full-color LEDs oer high-

intensity light output and a wide

viewing angle in an industry-standard

package. Designed to work in a wide

array of environmental conditions,

Cree PLCC full-color LEDs are suited

for indoor video screen, decorative

lighting and amusement applications.

FEATURES

• Size (mm):3.2 x 2.8

• Dominant Wavelength:

Red (619 - 624nm)

Green (520 - 535nm)

Blue (460 - 475nm)

• Luminous Intensity (mcd)

Red (505 - 1010)

Green (900 - 2240)

Blue (224 - 450)

• Moisture Sensitivity Level: 5a

• Lead-Free

• RoHS Compliant

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

www.cree.com/xlamp

the Cree logo are registered trademarks of Cree, Inc.

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

APPLICATIONS

• Full-Color Video Screen

• Decorative lighting

• Amusement

of Cree, Inc.

Cree PLCC4 3 in 1 SMD LED

CLV1A-FKB

ABSOLUTE MAXIMUM RATINGS (TA = 25°C)

Items Symbol

Absolute Maximum Rating

Unit

R G B

Forward Current Note 1 IF50 25 25 mA

Peak Forward Current Note 2 IFP 200 100 100 mA

Reverse Voltage VR5 5 5 V

Power Dissipation PD130 100 100 mW

Operation Temperature Topr -40 ~ +85 °C

Storage Temperature Tstg -40 ~ +100 °C

Junction Temperature TJ110 110 110 °C

Junction/ambient 1 chip on RTHJA 450 400 450 °C/W

Junction/ambient 3 chips on RTHJA 650 580 680 °C/W

Junction/solder point 1 chip on RTHJS 300 280 300 °C/W

Junction/solder point 3 chips on RTHJS 450 430 480 °C/W

Note: 1.Single-color light.

2.Pulse width ≤0.1 msec, duty ≤1/10.

TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C)

Characteristics Condition Symbol

Values

Unit

R G B

Dominant Wavelength IF = 20 mA λDOM 619~624 520~535 460~475 nm

Spectral bandwidth at 50% IREL max IF = 20 mA Δ λ 24 38 28 nm

Forward Voltage IF = 20 mA VF(avg) 2.0 3.2 3.2 V

VF(max) 2.6 4.0 4.0 V

Luminous Intensity IF = 20 mA IV(min) 505 900 224 mcd

IV(avg) 710 1450 310 mcd

Reverse Current (max) VR = 5 V IR10 10 10 μA

Note: Continuous reverse voltage can cause LED damage.

of Cree, Inc.

Cree PLCC4 3 in 1 SMD LED

CLV1A-FKB

COLOR BIN LIMIT (IF = 20 mA)

Tolerance of measurement of luminous intensity is ±10%.

Tolerance of measurement of dominant wavelength is ±1 nm.

Red

Bin Code Min.(mcd) Max.(mcd)

km 505 635

K560 710

np 635 805

M 710 900

qr 805 1010

Red

Bin Code Min.(nm) Max.(nm)

RB 619 624

INTENSITY BIN LIMIT (IF = 20 mA)

Blue

Bin Code Min.(mcd) Max.(mcd)

F224 280

de 252 318

G 280 355

fg 318 403

H355 450

Green

Bin Code Min.(nm) Max.(nm)

G7 520 525

G23 522.5 527.5

G8 525 530

G45 527.5 532.5

G9 530 535

Blue

Bin Code Min.(nm) Max.(nm)

B3 460 465

B23 462.5 467.5

B4 465 470

B45 467.5 472.5

B5 470 475

Green

Bin Code Min.(mcd) Max.(mcd)

N900 1120

st 1010 1260

P 1120 1400

vw 1260 1600

Q 1400 1800

xy 1600 2020

R 1800 2240

of Cree, Inc.

Cree PLCC4 3 in 1 SMD LED

CLV1A-FKB

ORDER CODE TABLE*

Kit Number Color

Luminous Intensity (mcd) Dominant Wavelength (nm)

Package

Min. Max. Color

Bin

Min.

(nm)

Color

Bin

Max.

(nm)

CLV1A-FKB-CkmqrNRFHBB79353

Red 505 1010 RB 619 RB 624 Reel

Green 900 2240 G7 520 G9 535 Reel

Blue 224 450 B3 460 B5 475 Reel

CLV1A-FKB-Ckm1P1F1BB7C3C3

Red Any 1 Intensity bin from km(505) - qr(1010) RB 619 RB 624 Reel

Green Any 1 Intensity bin from P(1120) - R(2240) Any 1 hue bin from G7(520) - G9(535) Reel

Blue Any 1 Intensity bin from F(224) - H(450) Any 1 hue bin from B3(460) - B5(475) Reel

CLV1A-FKB-CK1vw1de1BB7C3C3

Red Any 1 Intensity bin from K(560) - qr(1010) RB 619 RB 624 Reel

Green Any 1 Intensity bin from vw(1260) - R(2240) Any 1 hue bin from G7(520) - G9(535) Reel

Blue Any 1 Intensity bin from de(252) - H(450) Any 1 hue bin from B3(460) - B5(475) Reel

Notes:

1.The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one

intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color-bin

code will be orderable in certain quantities. For example, any 1 intensity bin from P - R means only 1 intensity bin

(P or vw or Q or xy or R) will be shipped by Cree. For example, any 1 color bin from G7 - G9 means only

1 color bin (G7 or G23 or G8 or G45 or G9)will be shipped by Cree.

2.Please refer to the “Cree LED Lamp Reliability Test Standards” document #1 for reliability test conditions.

3.Please refer to the “Cree LED Lamp Soldering & Handling” document #2 for information about how to use this LED

product safely.

#1: Refer to http://www.cree.com/led-components/media/documents/LED_Lamp_Reliability_Test_Standard.pdf

#2: Refer to http://www.cree.com/led-components/media/documents/sh-HB.pdf

of Cree, Inc.

Cree PLCC4 3 in 1 SMD LED

CLV1A-FKB

GRAPHS

The above data are collected from statistical gures that do not necessarily correspond to the actual

parameters of each single LED. Hence, these data will be changed without further notice.



of Cree, Inc.

Cree PLCC4 3 in 1 SMD LED

CLV1A-FKB

GRAPHS

The above data are collected from statistical gures that do not necessarily correspond to the actual

parameters of each single LED. Hence, these data will be changed without further notice.

of Cree, Inc.

Cree PLCC4 3 in 1 SMD LED

CLV1A-FKB

MECHANICAL DIMENSIONS

All dimensions are in mm.

NOTES

RoHS Compliance

The levels of RoHS-restricted materials in this product are below the maximum concentration values (also referred to

as the threshold limits) permitted for such substances, or are used in an exempted application in accordance with EU

Directive 2011/65/EC (RoHS2), as implemented by EU member states on January 2, 2013 and amended on March 31,

2015 by EU Directive 2015/863/EU.

RoHS Declarations for this product can be obtained from your Cree representative or from the Product Ecology section

of the Cree website.

Vision Advisory Claim

Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.

of Cree, Inc.

Cree PLCC4 3 in 1 SMD LED

CLV1A-FKB

KIT NUMBER SYSTEM

Cree LED lamps are tested and sorted into performance bins. A bin is specied by ranges of color, forward voltage, and

brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp

Packaging Standard” document for more information about shipping and packaging options.

Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are congured in the following man-

ner:

of Cree, Inc.

Cree PLCC4 3 in 1 SMD LED

CLV1A-FKB

REFLOW SOLDERING

• The CLV1A-FKB is rated as a MSL 5a product.

• Therecommendedoorlifeoutofbagis24hrs.

• Thetemperatureproleisasbelow.

Use only with CLV1A-FKB

Solder

Average ramp-up rate = 4ºC/s max

Preheat temperature = 150ºC ~200ºC

Preheat time = 120s max

Ramp-down rate = 6ºC/s max

Peak temperature = 250ºC max

Time within 5ºC of actual Peak Temperature = 10s max

Duration above 217ºC is 60s max

Document

No.:

COTCO

-05-0057

Rev

. NO. : 13

Melting-point

Pre-heat Soak Reflow Cooling

Time

Temperature

Use all SMD besides LP6-NPP1-01-N1

Solder = Sn63-Pb37 Solder = Lead-free

Average ramp-up rate =4ºC/s max. Average ramp-up rate =4ºC/s max

Preheat temperature = 100ºC ~150ºC Preheat temperature = 150ºC ~200ºC

Preheat time = 100s max. Preheat time = 100s max.

Ramp-down rate = 6ºC/s max. Ramp-down rate = 6ºC/s max.

Peak temperature = 230ºC max. Peak temperature = 250ºC max.

Time within 5ºC of actual Peak Temperature = 10s max. Time within 5ºC of actual Peak Temperature = 10s max.

Duration above 183ºC is 80s max. Duration above 217ºC is 80s max.

Only use LP6-NPP1-01-N1 [13]

Solder = Low Lead-free

Average ramp-up rate = 3ºC/s max.

Preheat temperature = 130ºC ~170ºC

Preheat time = 120s max.

Ramp-down rate = 6ºC/s max.

Peak temperature = 213ºC max.

Time within 3ºC of actual Peak Temperature = 25s max.

Duration above 200ºC is 40s max.

Recommended solder pad design for heat dissipation (2-pin SMD LED):

0.5

7.5

7.0

4.5

2.6

1.5

Recommended solder pad design for heat dissipation (4-pin SMD LED)

Referto"http://www.cree.com/led-components/media/documents/sh-HB.pdf"forsoldering&handlingdetails.

of Cree, Inc.

Cree PLCC4 3 in 1 SMD LED

CLV1A-FKB

NOTES

• The packaging sizes of these SMD products are very small and the resin is still soft after solidication. Users are

required to handle with care. Never touch the resin surface of SMD products.

• To avoid damaging the product’s surface and interior device, it is recommended to choose a special nozzle to pick

up the SMD products during the process of SMT production. If handling is necessary, take special care when picking

up these products. The following method is necessary:

Document No.:

CREE-05-0057

Rev. NO. :

9/9

pickupSMDproductsduringtheprocessofSMTproduction.Ifhandlingisnecessary,itshouldtakemore

careful to pick up these products.Thefollowingtwomethodsarenecessary :

Fig.1a: For Small Top SMD Fig.1b: For Mini side 0.8mm SMD

 ForSmallTopSMDseries,itisrecommendedtouserubbermaterialNozzletopickupSMDproducts.Two

figuresize for reference :

a.) Circular Nozzle: inner diameter: Ø1.8mm+/-0.05mm, outer diameter: Ø2.3mm+/-0.05mm.

b.)Rectangle Nozzle: innersize:1.3mm x 2.3mm,outer size > SMDsize.

6. Electrostatic Discharge and Surge current

 Electrostaticdischarge (ESD) orsurgecurrent(EOS) maydamageSMD LED.

 PrecautionssuchasESDwriststrap,ESDshoestraporantistaticglovesmustbewornwheneverhandlingofSMD LED.

 Alldevices,equipmentandmachinerymustbeproperlygrounded.

 Itisrecommendedto perform electrical test to screen out ESD failures at final inspection.

 Itisimportanttoeliminatethepossibilityofsurgecurrentduringcircuitrydesign

7. Heat Management

HeatmanagementofSMD LEDmustbetakenintoconsiderationduringthedesignstageof SMD LED application. The

current should be de-ratedappropriatelybyreferringtothede-ratingcurveattachedoneachproductspecification.

Dataissubjecttochangewithoutpriornotice.

of Cree, Inc.

Cree PLCC4 3 in 1 SMD LED

CLV1A-FKB

• The CLV1A-FKB is rated as a MSL 5a product.

• The boxes are not water resistant and they must be kept away from water and moisture.

• The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.

• Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.

• The reel pack is applied in SMD LED.

• Max 2000 pcs per reel.

PACKAGING

H UMIC HECK

w ww .vit apac .c om