1
Power Entry Modules with Line Filter 5008
https://www.schurter.com /PG06
EMC Products
IEC Appliance Inlet C8 with Filter, Front Side Mounting
Snap-in mounting from front side Screw-on mounting from front side
Approvals and Compliances
C8
70° C
Description
- Panel Mount :
Screw-on or snap-in mounting from front side
- 2 Functions :
Appliance Inlet Protection class II , Line filter in standard and medical
version
- Solder terminals or quick connect terminals
Characteristics
- Compact high performance filter
- Suitable for use in equipment according to IEC/UL 60950
Suitable for use in medical equipment according to IEC/UL 60601-1
Other versions on request
- Standard version without X-capacitor
- Polarized C8 connector
References
Alternative: version without line filter 2576; 2578
Weblinks
pdf datasheet, html-datasheet, General Product Information, Distributor-
Stock-Check, Accessories, Detailed request for product
Technical Data
Ratings IEC 0.5 - 2.5 A @ Ta 40 °C / 250 VAC; 50 Hz
Ratings UL/CSA 0.5 - 6 A @ Ta 40 °C / 250 VAC; 60 Hz
Dielectric Strength > 1.7 kVDC between L-N
> 4 kVDC between L/N-PE
Test voltage (2 sec)
Impulse Withstand Voltage > 2.5 kV between L-N
Allowable Operation Tempe-
rature
-25 °C to 85 °C
Climatic Category 25/085/21 acc. to IEC 60068-1
IP-Protection from front side IP 40 acc. to IEC 60529
Protection Class Suitable for appliances with protection
class II acc. to IEC 61140
Terminal solder pin or quick connect terminals
6.3 x 0.8 or 4.8 x 0.8 mm
Panel Thickness S Screw
Mounting screw torque max 0.5 Nm
Snap-in 1 mm to 3 mm
Material: Housing Thermoplastic, black, UL 94V-0
appliance inlet/-outlet C8 acc. to IEC 60320-1
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C,
2.5 A, Protection Class II
Line Filter Standard and Medical Version, IEC
60939, UL 1283, CSA C22.2 no. 8
Technical Details
MTBF > 6'700'000 h acc. to MIL-HB-217 F
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: 5008
Approval Logo Certificates Certification Body Description
VDE Approvals VDE Certificate Number: 40029278
UL Approvals UL UL File Number: E72928
2
Power Entry Modules with Line Filter
5008 https://www.schurter.com /PG06
EMC Products
Product standards
Product standards that are referenced
Organization Design Standard Description
Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes
Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference
Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links
Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements
Designed according to UL 498 Standard for Attachment Plugs and Receptacles
Designed according to UL 1283 Electromagnetic interference filters
Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters
Application standards
Application standards where the product can be used
Organization Design Standard Description
Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information
technologyequipment.
Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic
safety and essential performance
Compliances
The product complies with following Guide Lines
Identification Details Initiator Description
CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS SCHURTER AG EU Directive RoHS 2011/65/EU
China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1
3
Power Entry Modules with Line Filter 5008
https://www.schurter.com /PG06
EMC Products
Dimension [mm]
Screw-on mounting from front side
28
16
max. R 0.5
+0.20
0
±0.15
ø3.5
20.2+0.20
0
ø6.3 45.7
18 34.5 2.2
28±0.10
37
R 4
16
ø3.4
20
Snap-in mounting from front side
16
max. R 2
+0.20
0
24 +0.20
0
18 34.5 2.2
27.2
R 3
16
20
45.7
4
Power Entry Modules with Line Filter
5008 https://www.schurter.com /PG06
EMC Products
Technical Data of Filter-Components
Rated Current
[A]
Filter-Type Inductances
L [mH]
Capacitance
CX [nF]
Capacitance
CY [nF]
R [MΩ]
1 Standard Version without Cx 2 x 8 - - -
0.5 Standard Version 2 x 18 100 - -
1Standard Version 2 x 8 100 - -
2.5 Standard Version 2 x 1.2 100 - -
4Standard Version 2 x 0.8 100 - -
6Standard Version 2 x 0.3 100 - -
0.5 Medical Version (M5) 2 x 18 100 - 1
1Medical Version (M5) 2 x 8 100 - 1
2.5 Medical Version (M5) 2 x 1.2 100 - 1
4Medical Version (M5) 2 x 0.8 100 - 1
6Medical Version (M5) 2 x 0.3 100 - 1
Diagrams
Standard version
L
N
Cx
L1
L2
N’
L’
1)
2)
1) Line
2) Load
Medical version M5
L
N
Cx
L1
L2
N’
L’
R
1)
2)
1) Line
2) Load
Derating Curves
Admissible operating
current in % of In
0 20 40 60 85 100
100
80
60
40
20
0
Ambient air temperature Ta °C
5
Power Entry Modules with Line Filter 5008
https://www.schurter.com /PG06
EMC Products
Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode
Standard version
0.5 A 1 A 2.5 A 4 A
6 A
Medical version (M5)
0.5 A 1 A 2.5 A 4 A
6 A
All Variants
Rated Cur-
rent [A]
Filter-Type Mounting Terminal Order Number
1 Standard Version without Cx Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2211
0.5 Standard Version Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1010
0.5 Standard Version Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2010
1Standard Version Snap-in 1.5 Solder terminal 5008.2021
1Standard Version Snap-in 1.5 Quick connect terminal 6.3 x 0.8 mm 5008.2001
1Standard Version Snap-in 2.0 Quick connect terminal 4.8 x 0.8 mm 5008.3011
2.5 Standard Version Screw Solder terminal 5008.0022
2.5 Standard Version Screw Quick connect terminal 6.3 x 0.8 mm 5008.0002
2.5 Standard Version Screw Quick connect terminal 4.8 x 0.8 mm 5008.0012
2.5 Standard Version Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1012
2.5 Standard Version Snap-in 1.5 Solder terminal 5008.2022
2.5 Standard Version Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2012
2.5 Standard Version Snap-in 2.0 Solder terminal 5008.3022
2.5 Standard Version Snap-in 2.0 Quick connect terminal 6.3 x 0.8 mm 5008.3002
6
Power Entry Modules with Line Filter
5008 https://www.schurter.com /PG06
EMC Products
Rated Cur-
rent [A]
Filter-Type Mounting Terminal Order Number
4Standard Version Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2014
6Standard Version Screw Quick connect terminal 6.3 x 0.8 mm 5008.0006
6Standard Version Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1016
6Standard Version Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2016
0.5 Medical Version (M5) Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1110
1Medical Version (M5) Screw Quick connect terminal 4.8 x 0.8 mm 5008.0111
1Medical Version (M5) Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1111
1Medical Version (M5) Snap-in 2.0 Quick connect terminal 4.8 x 0.8 mm 5008.3111
2.5 Medical Version (M5) Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1112
2.5 Medical Version (M5) Snap-in 2.0 Quick connect terminal 6.3 x 0.8 mm 5008.3102
4Medical Version (M5) Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1114
4Medical Version (M5) Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2114
6Medical Version (M5) Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1116
6Medical Version (M5) Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2116
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
Packaging unit 20 Pcs
Mating Outlets/Connectors
Category / Description
Power Cord Overview complete
Cord Sets 2.5 A, IEC Connector, Black, 2.0 m, H03VVH2-F 2x0,75mm2, Connector IEC C7, 001500 mm, H03VVH2-
F2G0.75, black 6013.0474
Cord Sets 2.5 A, IEC Connector, Black, 4.0 m, H03VVH2-F 2x0,75mm2, Connector IEC C7, 001500 mm, H05VVH2-
F2G0.75, black 6013.0478
Power Cord further types to 5008
Power Supply Cord Overview complete
Cord Sets 2.5 A, North America, Black, 2.0 m, SVT 2x18AWG, Connector IEC C7, 002500 mm, NISPT-2, black 6010.5274
Cord Sets 2.5 A, North America, Black, 4.0 m, SVT 2x18AWG, Connector IEC C7, 002500 mm, NISPT-2, black 6010.5278
Power Supply Cord further types to 5008
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
02.12.2017
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Schurter:
5008.0002 5008.0006 5008.0012 5008.0022 5008.0111 5008.1010 5008.1012 5008.1016 5008.1110 5008.1111
5008.1112 5008.1114 5008.1116 5008.2001 5008.2010 5008.2012 5008.2014 5008.2016 5008.2021 5008.2022
5008.2114 5008.2116 5008.2211 5008.3002 5008.3011 5008.3022 5008.3102 5008.3111
