5008 Power Entry Modules with Line Filter https://www.schurter.com /PG06 IEC Appliance Inlet C8 with Filter, Front Side Mounting Snap-in mounting from front side Screw-on mounting from front side C8 Approvals and Compliances 70 C Description - Panel Mount : Screw-on or snap-in mounting from front side - 2 Functions : Appliance Inlet Protection class II , Line filter in standard and medical version - Solder terminals or quick connect terminals Characteristics - Compact high performance filter - Suitable for use in equipment according to IEC/UL 60950 Suitable for use in medical equipment according to IEC/UL 60601-1 Other versions on request - Standard version without X-capacitor - Polarized C8 connector References Alternative: version without line filter 2576;2578 Weblinks pdf datasheet, html-datasheet, General Product Information, DistributorStock-Check, Accessories, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Impulse Withstand Voltage Allowable Operation Temperature Climatic Category IP-Protection Protection Class Terminal Panel Thickness S Material: Housing 0.5 - 2.5 A @ Ta 40 C / 250 VAC; 50 Hz 0.5 - 6 A @ Ta 40 C / 250 VAC; 60 Hz > 1.7 kVDC between L-N > 4 kVDC between L/N-PE Test voltage (2 sec) > 2.5 kV between L-N -25 C to 85 C appliance inlet/-outlet Line Filter MTBF C8 acc. to IEC 60320-1 UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 C, 2.5 A, Protection Class II Standard and Medical Version, IEC 60939, UL 1283, CSA C22.2 no. 8 Technical Details > 6'700'000 h acc. to MIL-HB-217 F 25/085/21 acc. to IEC 60068-1 from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class II acc. to IEC 61140 solder pin or quick connect terminals 6.3 x 0.8 or 4.8 x 0.8 mm Screw Mounting screw torque max 0.5 Nm Snap-in 1 mm to 3 mm Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 5008 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40029278 UL Approvals UL UL File Number: E72928 EMC Products 1 5008 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification 2 EMC Products 5008 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Dimension [mm] Screw-on mounting from front side 34.5 45.7 o3.4 +0.20 0 20.2 28 0.15 +0.20 0 16 20 37 R4 o6.3 16 2.2 28 0.10 18 max. R 0.5 o3.5 Snap-in mounting from front side 34.5 16 2.2 20 27.2 18 R3 +0.20 0 24 +0.20 0 16 45.7 max. R 2 EMC Products 3 5008 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Technical Data of Filter-Components Rated Current [A] 1 Filter-Type Inductances L [mH] Standard Version without Cx Capacitance CX [nF] Capacitance CY [nF] R [M] 2x8 - - - 0.5 Standard Version 2 x 18 100 - - 1 Standard Version 2x8 100 - - 2.5 Standard Version 2 x 1.2 100 - - 4 Standard Version 2 x 0.8 100 - - Standard Version 2 x 0.3 100 - - 0.5 6 Medical Version (M5) 2 x 18 100 - 1 1 Medical Version (M5) 2x8 100 - 1 2.5 Medical Version (M5) 2 x 1.2 100 - 1 4 Medical Version (M5) 2 x 0.8 100 - 1 6 Medical Version (M5) 2 x 0.3 100 - 1 Diagrams Standard version Medical version M5 L L1 1) Cx L2 N L' L 2) 1) N' 1) Line 2) Load 1) Line 2) Load Derating Curves 100 Admissible operating current in % of In N 80 60 40 20 0 0 20 40 60 85 100 Ambient air temperature Ta C 4 EMC Products L1 2) R Cx L' L2 N' 5008 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Attenuation Loss - - - - 50 differential mode _____ 50 common mode Standard version 0.5 A 1A 2.5 A 4A 1A 2.5 A 4A 6A Medical version (M5) 0.5 A 6A All Variants Rated Current [A] 1 Filter-Type Mounting Terminal Order Number Standard Version without Cx Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2211 0.5 Standard Version Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1010 0.5 Standard Version Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2010 1 Standard Version Snap-in 1.5 Solder terminal 5008.2021 1 Standard Version Snap-in 1.5 Quick connect terminal 6.3 x 0.8 mm 5008.2001 1 Standard Version Snap-in 2.0 Quick connect terminal 4.8 x 0.8 mm 5008.3011 2.5 Standard Version Screw Solder terminal 5008.0022 2.5 Standard Version Screw Quick connect terminal 6.3 x 0.8 mm 5008.0002 2.5 Standard Version Screw Quick connect terminal 4.8 x 0.8 mm 5008.0012 2.5 Standard Version Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1012 2.5 Standard Version Snap-in 1.5 Solder terminal 5008.2022 2.5 Standard Version Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2012 2.5 Standard Version Snap-in 2.0 Solder terminal 5008.3022 2.5 Standard Version Snap-in 2.0 Quick connect terminal 6.3 x 0.8 mm 5008.3002 EMC Products 5 5008 Rated Current [A] Power Entry Modules with Line Filter https://www.schurter.com /PG06 Filter-Type Mounting Terminal Order Number Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2014 4 Standard Version 6 Standard Version Screw Quick connect terminal 6.3 x 0.8 mm 5008.0006 6 Standard Version Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1016 6 Standard Version Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2016 0.5 Medical Version (M5) Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1110 1 Medical Version (M5) Screw Quick connect terminal 4.8 x 0.8 mm 5008.0111 1 Medical Version (M5) Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1111 1 Medical Version (M5) Snap-in 2.0 Quick connect terminal 4.8 x 0.8 mm 5008.3111 2.5 Medical Version (M5) Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1112 2.5 Medical Version (M5) Snap-in 2.0 Quick connect terminal 6.3 x 0.8 mm 5008.3102 4 Medical Version (M5) Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1114 4 Medical Version (M5) Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2114 6 Medical Version (M5) Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1116 6 Medical Version (M5) Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2116 Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 20 Pcs Mating Outlets/Connectors Category / Description Power Cord Overview complete Cord Sets 2.5 A, IEC Connector, Black, 2.0 m, H03VVH2-F 2x0,75mm2, Connector IEC C7, 001500 mm, H03VVH2F2G0.75, black 6013.0474 Cord Sets 2.5 A, IEC Connector, Black, 4.0 m, H03VVH2-F 2x0,75mm2, Connector IEC C7, 001500 mm, H05VVH2F2G0.75, black 6013.0478 Power Cord further types to 5008 Power Supply Cord Overview complete Cord Sets 2.5 A, North America, Black, 2.0 m, SVT 2x18AWG, Connector IEC C7, 002500 mm, NISPT-2, black 6010.5274 Cord Sets 2.5 A, North America, Black, 4.0 m, SVT 2x18AWG, Connector IEC C7, 002500 mm, NISPT-2, black 6010.5278 02.12.2017 Power Supply Cord further types to 5008 6 EMC Products The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Schurter: 5008.0002 5008.0006 5008.0012 5008.0022 5008.0111 5008.1010 5008.1012 5008.1016 5008.1110 5008.1111 5008.1112 5008.1114 5008.1116 5008.2001 5008.2010 5008.2012 5008.2014 5008.2016 5008.2021 5008.2022 5008.2114 5008.2116 5008.2211 5008.3002 5008.3011 5008.3022 5008.3102 5008.3111