https://www.phoenixcontact.com/us/products/2688501
01/03/2021Page1/9
I/O module-AXL F AI4 U 1H-2688501
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
AxiolineF, Analog input module, Analog inputs: 4, 0 V ... 5 V, -5 V ... 5 V, 0 V ... 10 V, -10 V ... 10 V, connection
method: 2-, 3-, 4-conductor, transmission speed in the local bus: 100 Mbps, integrated sensor supply, degree of
protection: IP20, including bus base module and AxiolineF connectors
Product Description
The module is designed for use within an AxiolineF station.
It is used to acquire analog voltage signals.
Your advantages
4 analog, bipolar input channels for the connection of voltage signals
Connection of sensors in 2-, 3-, and 4-conductor technology
Voltage ranges: 0V ... 10V, ±10V, 0V ... 5V, ±5V
Simultaneous scanning of all channels by means of simultaneous sampling
High crosstalk attenuation between the channels, thanks to separate signal paths
Particularly robust against electromagnetic interference
Device rating plate stored
Key Commercial Data
Packing unit 1 pc
GTIN
GTIN 4046356744232
Weight per Piece (excluding packing) 200.000 g
Custom tariff number 85389091
Country of origin Germany
Technical data
Dimensions
https://www.phoenixcontact.com/us/products/2688501
01/03/2021Page2/9
I/O module-AXL F AI4 U 1H-2688501
Technical data
Dimensions
Width 35 mm
Height 126.1 mm
Depth 54 mm
Note on dimensions The depth is valid when a TH35-7,5 DIN rail is used (according to
EN60715).
Ambient conditions
Ambient temperature (operation) -25 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)
Air pressure (operation) 70 kPa ... 106 kPa (up to 3000m above sea level)
Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000m above sea level)
Degree of protection IP20
Connection data
Designation AxiolineF connector
Connection method Push-in connection
Note on the connection method Please observe the information provided on conductor cross sections in
the “AxiolineF: system and installation” user manual.
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 1.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 16
Stripping length 8 mm
General
Mounting type DIN rail
Color traffic grey A RAL 7042
Net weight 191 g
Note on weight specifications with connectors and bus base module
Mounting position any (no temperature derating)
Interfaces
Designation AxiolineFlocal bus
Number 2
Connection method Bus base module
Transmission speed 100 Mbps
https://www.phoenixcontact.com/us/products/2688501
01/03/2021Page3/9
I/O module-AXL F AI4 U 1H-2688501
Technical data
Axioline potentials
Designation AxiolineF local bus supply (UBus)
Supply voltage 5 VDC (via bus base module)
Current consumption typ. 120 mA
max. 150 mA
Power consumption typ. 0.6 W
max. 0.75 W
Designation Supply for analog modules (UA)
Supply voltage 24 VDC (I/O supply and sensor supply)
Supply voltage range 19.2 VDC ... 30 VDC (including all tolerances, including ripple)
Current consumption max. 45 mA (IiS = 0 mA)
typ. 118 mA (IiS = 4 x 20 mA (nominal load))
max. 125 mA (IiS = 4 x 20 mA (nominal load))
typ. 238 mA (IiS = 4 x 50 mA (full load))
max. 245 mA (IiS = 4 x 50 mA (full load))
Protective circuit Surge protection electronic (35 V, 0.5 s)
Reverse polarity protection up to HW02: polarity protection diodeas of
HW03: parallel diode; with external 5A fuse (for startup only)
Transient protection Suppressor diode
Power consumption typ. 1.5 W (at UBus and UA)
max. 1.83 W (at UBus and UA)
Analog inputs
Description of the input Differential inputs, voltage
Input name Analog inputs
Number of inputs 4
Connection method Push-in connection
Connection technology 2-, 3-, 4-conductor
Note regarding the connection technology shielded, twisted pair
A/D conversion time 31.25 µs
A/D converter resolution 16 bit
Limit frequency (3 dB) 30 Hz
12 kHz
Type of protection Transient protection of inputs
Overload protection of the voltage inputs
Data formats IB IL, S7-compatible
Measured value representation 16 bits (15 bits + sign bit)
Voltage input signal 0 V ... 5 V
-5 V ... 5 V
https://www.phoenixcontact.com/us/products/2688501
01/03/2021Page4/9
I/O module-AXL F AI4 U 1H-2688501
Technical data
Analog inputs
0 V ... 10 V
-10 V ... 10 V
Input resistance of voltage input 268 kΩ (typical)
Common mode voltage range signal - ground -50 VDC ... 50 VDC
Input filter 30 Hz, 12 kHz and mean-value generation (can be parameterized)
Electrical isolation
Test section 5V supply of the local bus (UBus) / 24V supply (I/Os) 500 VAC 50 Hz 1
min.
5V supply of the local bus (UBus)/analog inputs 500 VAC 50 Hz 1 min.
5V supply of the local bus (UBus) / functional ground 500 VAC 50 Hz 1 min.
24 V supply (I/O)/analog inputs 500 VAC 50 Hz 1 min.
24V supply (I/O)/functional ground 500 VAC 50 Hz 1 min.
Analog inputs/functional ground 500 VAC 50 Hz 1 min.
Standards and Regulations
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic
discharge (ESD) EN61000-4-2/IEC61000-4-2 Criterion B, 6 kV contact
discharge, 8 kV air discharge
Immunity to EF Noise immunity test in accordance with EN 61000-6-2 Electromagnetic
fields EN61000-4-3/IEC61000-4-3 Criterion A, Field intensity: 10 V/m
Immunity to burst Noise immunity test in accordance with EN 61000-6-2 Fast transients
(burst) EN61000-4-4/IEC61000-4-4 Criterion B, 2kV
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient
overvoltage (surge) EN61000-4-5/IEC61000-4-5 up to HW02: Criterion
B,DC supply lines: ±0.5kV/±0.5kV (symmetrical/asymmetrical), ±1kV to
shielded I/O cables
Immunity to conducted interference Noise immunity test in accordance with EN 61000-6-2 Conducted
interference EN61000-4-6/IEC61000-4-6 Criterion A, Test voltage 10 V
Interference emission Noise emission test according to EN 61000-6-3 Class B
Mechanical tests Vibration resistance in acc. with EN60068-2-6/IEC60068-2-6 5g
Shock in acc. with EN60068-2-27/IEC60068-2-27 30g
Continuous shock according to EN60068-2-27/IEC60068-2-27 10g
Protection class III (IEC61140, EN61140, VDE0140-1)
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
https://www.phoenixcontact.com/us/products/2688501
01/03/2021Page5/9
I/O module-AXL F AI4 U 1H-2688501
Connection diagram
00
10
20
30
01
11
21
31
02
12
22
32
03
13
23
33
a1
a2
b1
b2
U
U
GND
P
U
+24 V
U
Connector for voltage measurement
Dimensional drawing
35 54
122,4
126,1
Block diagram
D
UA
E1
E2
2x
AI 1...4
U
24 V
ANA
UBus
Local bus
μC
#
U
REF
#
U
REF
Supervisor
FE
Uis
PTC
PTC
Classifications
eCl@ss
eCl@ss 10.0.1 27242601
eCl@ss 11.0 27242601
eCl@ss 4.0 27240400
eCl@ss 4.1 27240400
eCl@ss 5.0 27242200
eCl@ss 5.1 27242600
eCl@ss 6.0 27242600
eCl@ss 7.0 27242601
eCl@ss 8.0 27242601
eCl@ss 9.0 27242601
ETIM
ETIM 3.0 EC001599
https://www.phoenixcontact.com/us/products/2688501
01/03/2021Page6/9
I/O module-AXL F AI4 U 1H-2688501
Classifications
ETIM
ETIM 4.0 EC001599
ETIM 5.0 EC001596
ETIM 6.0 EC001596
ETIM 7.0 EC001596
UNSPSC
UNSPSC 6.01 43172015
UNSPSC 7.0901 43201404
UNSPSC 11 39121311
UNSPSC 12.01 39121311
UNSPSC 13.2 32151602
UNSPSC 18.0 32151602
UNSPSC 19.0 32151602
UNSPSC 20.0 32151602
UNSPSC 21.0 32151602
Approvals
Approvals
Approvals
PRS / BV / LR / KR / ABS / BSH / RINA / DNV GL / UL Listed / cUL Listed / cULus Listed
Ex Approvals
Approval details
PRS http://www.prs.pl/ TE/2239/880590/19
BV http://www.veristar.com/portal/veristarinfo/generalinfo/
approved/approvedProducts/equipmentAndMaterials 36433/B1 BV
https://www.phoenixcontact.com/us/products/2688501
01/03/2021Page7/9
I/O module-AXL F AI4 U 1H-2688501
Approvals
LR http://www.lr.org/en LR2001902TA
KR http://www.krs.co.kr/eng/main/main.aspx HMB17372-AC002
ABS http://www.eagle.org/eagleExternalPortalWEB/ 18-HG1767360-PDA
BSH 840
RINA http://www.rina.org/en ELE030120XG
DNV GL https://approvalfinder.dnvgl.com/ TAA00000DF
UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705
cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705
cULus Listed
Accessories
Accessories
Device marking
https://www.phoenixcontact.com/us/products/2688501
01/03/2021Page8/9
I/O module-AXL F AI4 U 1H-2688501
Accessories
Insert label-EMT (35X28)R-0801602
Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: snapped into marker
carrier, lettering field size: 35 x 28 mm, Number of individual labels: 500
DIN rail connector
Bus connector-AXL F BS H-2700992
AxiolineF bus base module for housing type H
Shield connection
Shield connection-AXL SHIELD SET-2700518
Axioline shield connection set (contains 2 shield bus holders and 2 SK 5 shield connection clamps)
Terminal marking
Zack marker strip-ZB 20,3 AXL UNPRINTED-0829579
Zack marker strip for AxiolineF (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with
B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER
https://www.phoenixcontact.com/us/products/2688501
01/03/2021Page9/9
I/O module-AXL F AI4 U 1H-2688501
Accessories
Zack Marker strip, flat-ZBF 10/5,8 AXL UNPRINTED-0829580
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into flat marker groove, for terminal block width: 10.15 mm, lettering field size: 4 of 10.15 x 5 mm and 1 of 5.8 x 5
mm, Number of individual labels: 50
Phoenix Contact 2021 © - all rights reserved
http://www.phoenixcontact.com
