https://www.phoenixcontact.com/us/products/2688501 I/O module-AXL F AI4 U 1H-2688501 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) AxiolineF, Analog input module, Analog inputs: 4, 0 V ... 5 V, -5 V ... 5 V, 0 V ... 10 V, -10 V ... 10 V, connection method: 2-, 3-, 4-conductor, transmission speed in the local bus: 100 Mbps, integrated sensor supply, degree of protection: IP20, including bus base module and AxiolineF connectors Product Description The module is designed for use within an AxiolineF station. It is used to acquire analog voltage signals. Your advantages 4 analog, bipolar input channels for the connection of voltage signals Connection of sensors in 2-, 3-, and 4-conductor technology Voltage ranges: 0V ... 10V, 10V, 0V ... 5V, 5V Simultaneous scanning of all channels by means of simultaneous sampling High crosstalk attenuation between the channels, thanks to separate signal paths Particularly robust against electromagnetic interference Device rating plate stored Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356744232 Weight per Piece (excluding packing) 200.000 g Custom tariff number 85389091 Country of origin Germany Technical data Dimensions 01/03/2021Page1/9 https://www.phoenixcontact.com/us/products/2688501 I/O module-AXL F AI4 U 1H-2688501 Technical data Dimensions Width 35 mm Height 126.1 mm Depth 54 mm Note on dimensions The depth is valid when a TH35-7,5 DIN rail is used (according to EN60715). Ambient conditions Ambient temperature (operation) -25 C ... 60 C Ambient temperature (storage/transport) -40 C ... 85 C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000m above sea level) Degree of protection IP20 Connection data Designation AxiolineF connector Connection method Push-in connection Note on the connection method Please observe the information provided on conductor cross sections in the "AxiolineF: system and installation" user manual. Conductor cross section solid min. 0.2 mm Conductor cross section solid max. 1.5 mm Conductor cross section flexible min. 0.2 mm Conductor cross section flexible max. 1.5 mm Conductor cross section AWG min. 24 Conductor cross section AWG max. 16 Stripping length 8 mm General Mounting type DIN rail Color traffic grey A RAL 7042 Net weight 191 g Note on weight specifications with connectors and bus base module Mounting position any (no temperature derating) Interfaces Designation AxiolineFlocal bus Number 2 Connection method Bus base module Transmission speed 100 Mbps 01/03/2021Page2/9 https://www.phoenixcontact.com/us/products/2688501 I/O module-AXL F AI4 U 1H-2688501 Technical data Axioline potentials Designation AxiolineF local bus supply (UBus) Supply voltage 5 VDC (via bus base module) Current consumption typ. 120 mA max. 150 mA Power consumption typ. 0.6 W max. 0.75 W Designation Supply for analog modules (UA) Supply voltage 24 VDC (I/O supply and sensor supply) Supply voltage range 19.2 VDC ... 30 VDC (including all tolerances, including ripple) Current consumption max. 45 mA (IiS = 0 mA) typ. 118 mA (IiS = 4 x 20 mA (nominal load)) max. 125 mA (IiS = 4 x 20 mA (nominal load)) typ. 238 mA (IiS = 4 x 50 mA (full load)) max. 245 mA (IiS = 4 x 50 mA (full load)) Protective circuit Surge protection electronic (35 V, 0.5 s) Reverse polarity protection up to HW02: polarity protection diodeas of HW03: parallel diode; with external 5A fuse (for startup only) Transient protection Suppressor diode Power consumption typ. 1.5 W (at UBus and UA) max. 1.83 W (at UBus and UA) Analog inputs Description of the input Differential inputs, voltage Input name Analog inputs Number of inputs 4 Connection method Push-in connection Connection technology 2-, 3-, 4-conductor Note regarding the connection technology shielded, twisted pair A/D conversion time 31.25 s A/D converter resolution 16 bit Limit frequency (3 dB) 30 Hz 12 kHz Type of protection Transient protection of inputs Overload protection of the voltage inputs Data formats IB IL, S7-compatible Measured value representation 16 bits (15 bits + sign bit) Voltage input signal 0 V ... 5 V -5 V ... 5 V 01/03/2021Page3/9 https://www.phoenixcontact.com/us/products/2688501 I/O module-AXL F AI4 U 1H-2688501 Technical data Analog inputs 0 V ... 10 V -10 V ... 10 V Input resistance of voltage input 268 k (typical) Common mode voltage range signal - ground -50 VDC ... 50 VDC Input filter 30 Hz, 12 kHz and mean-value generation (can be parameterized) Electrical isolation Test section 5V supply of the local bus (UBus) / 24V supply (I/Os) 500 VAC 50 Hz 1 min. 5V supply of the local bus (UBus)/analog inputs 500 VAC 50 Hz 1 min. 5V supply of the local bus (UBus) / functional ground 500 VAC 50 Hz 1 min. 24 V supply (I/O)/analog inputs 500 VAC 50 Hz 1 min. 24V supply (I/O)/functional ground 500 VAC 50 Hz 1 min. Analog inputs/functional ground 500 VAC 50 Hz 1 min. Standards and Regulations Immunity to ESD Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN61000-4-2/IEC61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge Immunity to EF Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN61000-4-3/IEC61000-4-3 Criterion A, Field intensity: 10 V/m Immunity to burst Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN61000-4-4/IEC61000-4-4 Criterion B, 2kV Immunity to surge Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN61000-4-5/IEC61000-4-5 up to HW02: Criterion B,DC supply lines: 0.5kV/0.5kV (symmetrical/asymmetrical), 1kV to shielded I/O cables Immunity to conducted interference Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN61000-4-6/IEC61000-4-6 Criterion A, Test voltage 10 V Interference emission Noise emission test according to EN 61000-6-3 Class B Mechanical tests Vibration resistance in acc. with EN60068-2-6/IEC60068-2-6 5g Shock in acc. with EN60068-2-27/IEC60068-2-27 30g Continuous shock according to EN60068-2-27/IEC60068-2-27 10g Protection class III (IEC61140, EN61140, VDE0140-1) Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings 01/03/2021Page4/9 https://www.phoenixcontact.com/us/products/2688501 I/O module-AXL F AI4 U 1H-2688501 Connection diagram a1 00 01 02 Dimensional drawing 35 03 54 P GND 10 11 12 13 b1 20 21 22 23 b2 30 31 32 33 U U +24 V 122,4 a2 126,1 U U Connector for voltage measurement Block diagram Supervisor UBus C Local bus 2x FE # Uis U D UA E1 E2 REF # U REF PTC PTC UANA 24 V AI 1...4 Classifications eCl@ss eCl@ss 10.0.1 27242601 eCl@ss 11.0 27242601 eCl@ss 4.0 27240400 eCl@ss 4.1 27240400 eCl@ss 5.0 27242200 eCl@ss 5.1 27242600 eCl@ss 6.0 27242600 eCl@ss 7.0 27242601 eCl@ss 8.0 27242601 eCl@ss 9.0 27242601 ETIM ETIM 3.0 EC001599 01/03/2021Page5/9 https://www.phoenixcontact.com/us/products/2688501 I/O module-AXL F AI4 U 1H-2688501 Classifications ETIM ETIM 4.0 EC001599 ETIM 5.0 EC001596 ETIM 6.0 EC001596 ETIM 7.0 EC001596 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 39121311 UNSPSC 12.01 39121311 UNSPSC 13.2 32151602 UNSPSC 18.0 32151602 UNSPSC 19.0 32151602 UNSPSC 20.0 32151602 UNSPSC 21.0 32151602 Approvals Approvals Approvals PRS / BV / LR / KR / ABS / BSH / RINA / DNV GL / UL Listed / cUL Listed / cULus Listed Ex Approvals Approval details PRS http://www.prs.pl/ TE/2239/880590/19 BV http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials 36433/B1 BV 01/03/2021Page6/9 https://www.phoenixcontact.com/us/products/2688501 I/O module-AXL F AI4 U 1H-2688501 Approvals LR http://www.lr.org/en LR2001902TA KR http://www.krs.co.kr/eng/main/main.aspx HMB17372-AC002 ABS http://www.eagle.org/eagleExternalPortalWEB/ 18-HG1767360-PDA BSH 840 RINA http://www.rina.org/en ELE030120XG DNV GL https://approvalfinder.dnvgl.com/ TAA00000DF UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cULus Listed Accessories Accessories Device marking 01/03/2021Page7/9 https://www.phoenixcontact.com/us/products/2688501 I/O module-AXL F AI4 U 1H-2688501 Accessories Insert label-EMT (35X28)R-0801602 Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: snapped into marker carrier, lettering field size: 35 x 28 mm, Number of individual labels: 500 DIN rail connector Bus connector-AXL F BS H-2700992 AxiolineF bus base module for housing type H Shield connection Shield connection-AXL SHIELD SET-2700518 Axioline shield connection set (contains 2 shield bus holders and 2 SK 5 shield connection clamps) Terminal marking Zack marker strip-ZB 20,3 AXL UNPRINTED-0829579 Zack marker strip for AxiolineF (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER 01/03/2021Page8/9 https://www.phoenixcontact.com/us/products/2688501 I/O module-AXL F AI4 U 1H-2688501 Accessories Zack Marker strip, flat-ZBF 10/5,8 AXL UNPRINTED-0829580 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 10.15 mm, lettering field size: 4 of 10.15 x 5 mm and 1 of 5.8 x 5 mm, Number of individual labels: 50 Phoenix Contact 2021 (c) - all rights reserved http://www.phoenixcontact.com 01/03/2021Page9/9