APEM www.apem.com A-63
11000 and 12000 series
Professional toggle switches
Distinctive features
A
❑❑ Applications
These switches are specially manufactured for defence, avionics, space and
telecommunications applications.
❑❑ Approvals and lists
• QPL (in Europe) and MUAHAG listed
• meeting the requirements of MIL standard (MIL 3950)
❑❑ Robust switches for high specification environments
❑❑ Toggle action on 2-position models giving smooth mechanical
operation
❑❑ Plastic material with high insulation resistance
❑❑ Several front panel sealing options
❑❑ Several locking lever options (12000 series)
❑❑ Bright chrome, satin chrome or matt black finish
CECC 96201-005
CECC 96201-008
A-64 APEM www.apem.com
A
11000 series
Professional toggle switches - threaded bushing Ø 6,35 (1/4)
Specifications
MATERIALS
• Case : diallylphthalate (DAP)
• Actuator : brass, chrome plated
• Bushing : brass, nickel plated
• Housing : brass, nickel plated
• Contacts
A : silver
AD2 : gold plated silver
(2 microns gold)
X780 : solid rivet - gold plated
silver/nickel alloy
D: solid gold rivet
X910 : silver/nickel alloy (for
peak currents, see “Special
options”)
• Terminal seal : epoxy
Note : AD2 and X780 contacts
can be used for high level
applications. In this case, the
gold layer is considered only as
a protection against oxidation
during storage.
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load : Peak currents, refer to “Special options”.
- silver contacts (A-AD2-X780) : 2A 250VAC - 4A 125VAC - 4A 30VDC
- gold contacts (D) : 200mA 250VAC - 400mA 125VAC
• Minimum load : AD2-X780-D contacts : 10mA 50mV, 10µA 5V min.
• Initial contact resistance : 10 mΩmax.
• Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength :
1.000 Vrms 50 Hz min. between terminals
2.000 Vrms 50 Hz min. between poles and between terminals and frame
• Contact bounce : 2 ms max.
• Electrical life at full load :
Contacts Max. current/voltage rating 2 positions 3 positions
A 2A 250VAC - 4A 125VAC - 4A 30VDC 50.000 50.000
AD2 2A 250VAC - 4A 125 VAC - 4A 30VDC 20.000 20.000
X780 (Gold plating : 100mA 30VDC max.)
D 200mA 250VAC - 400mA 125VAC 80.000 50.000
Low level or mechanical life 150.000 100.000
GENERAL SPECIFICATIONS
• Torque :1,25 Nm (.92 Ft.lb) max. applied between the 2 nuts
• Standard panel thickness : 2,5 mm (.098) max.
• Operating temperature : -40°C to +85°C
RELIABILITY - RUN-IN TEST
Upon request, each individual switch can be submitted to a low level run-in
test of 50 or 250 cycles to ensure suitability for special applications requiring
a very high level of reliability (military, space, etc.).
Number of cycles
AGENCY APPROVALS/PREFERENTIAL LISTS
QPL (Europe only)
MUAHAG
Availability : consult factory for details of approved models.
Marking : to order switches marked CECC, complete appropriate box of
ordering format. Preferential lists do not appear on the switches.
CECC 96201-005
CECC 96201-008
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
Packaging unit : 25 pieces or 50 pieces depending on models.
APEM www.apem.com A-65
A
11000 series
Professional toggle switches - threaded bushing Ø 6,35 (1/4)
Overview
11
SERIES
Terminals and bushings
1Solder lug or right
angle
2Straight PC terminals
All models with Ø 6,35
(1/4) threaded bushing.
Number of poles
3Single pole
4Double pole
5Three pole
6Four pole
Electrical functions
6ON - ON
9ON OFF ON
7MOM OFF MOM
8ON OFF MOM
Terminals
Blank Solder lug or
straight PC
WRight angle,
horizontal mounting
(function 6, SP only)
Contact materials
ASilver
AD2 Gold plated silver
(2 microns)
DSolid gold rivet
See "Special options" for X780
(solid silver/nickel rivet) and
X910 (for peak currents).
Special options
Blank No special
requirement
X408 Front panel sealing
by two O-rings
Other : see following pages.
Levers
-13 Standard
-26 Cylindrical
Sealing
Blank Epoxy sealed terminals
standard
KFront panel sealing by
one O-ring and sealing
washer
Sealing by two O-rings, see
X408, "Special options" box.
Finish
Blank Bright chrome finish
GMatt black finish on
bushing, actuator
and hardware.
Approval
CECC
Availability : Consult
factory for details of
approved models.
ABOUT THIS SERIES
On the following pages, you will find successively :
- model structure of switches
- options in the same order as in above chart
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
Sealing boots are available to protect the switches against dust and water. They are presented in section H.
Mounting accessories : standard hardware supplied with all models : 2 hex nuts 8 (.314) across flats, 1 locking ring and 1
lockwasher. Standard and special hardware available are presented in section I.
A-66 APEM www.apem.com
11000 series
Professional toggle switches - threaded bushing Ø 6,35 (1/4)
A
Solder lug terminals - three pole
Solder lug terminals - double pole
Solder lug terminals - single pole
MODEL
STRUCTURE
Function 6 Other functions
• Solder lug, straight PC or right angle terminals
• Epoxy sealed terminals standard
I II III
11136 ON - ON
11139 ON OFF ON
11137 MOM OFF MOM
11138 ON OFF MOM
I II III
11146 ON - ON
11149 ON OFF ON
11147 MOM OFF MOM
11148 ON OFF MOM
I II III
11156 ON - ON
11159 ON OFF ON
11157 MOM OFF MOM
11158 ON OFF MOM
Shown with standard lever (-13)
➞Keyway
➞Keyway
➞Keyway
➞Keyway
1123 23
(.098)
(.047)
(.066)
(.196)
1.70
5.00
1.20
2.50
(.374)
(.039)
9.50
1.00
1
2
3
EPOXY
(.196)
5.00
2.50
0.50
4.00
14.00
I
II
III
(.098)
(.019)
(.157)
(.551)
1
(.527)(.248)
(.027)
(.444)
26˚
(.314)
(.118 DIA)
(1/4-40UNS)
11.30 6.30 13.40 8.00
0.70
Ø6.35-40UNS
Ø3.00
23
(.236)
(.098)
4
5
6
6.00
2.50
5.00
(.196)
EPOXY
1
2
3
0.70
13.406.3011.30
26˚
(.444)
(.027)
(.248) (.527)
3
(.157)
(.019)
I
II
III
4.00
0.50
(.551)
14.00
Ø3.00
Ø6.35-40UNS
(1/4-40UNS)
(.118 DIA)
(.551)
14.00
21
EPOXY
2.50
6.00
0.50
4.00
14.00
5.00
III
II
I
9
8
7
(.098)
(.196)
(.019)
(.157)
(.236)
(.551)
3
4
5
6
(.787)
20.00
(.669)(.224)(.444)
(1/4-40UNS)
Ø6.35-40UNS
(.118 DIA)
Ø3.00
20˚
(.472 DIA)
(.169)
4.30
11.30 5.70 17.00
Ø12.00
21
APEM www.apem.com A-67
11000 series
Professional toggle switches - threaded bushing Ø 6,35 (1/4)
A
Straight PC terminals - three pole ▲
Straight PC terminals - double pole ▲
Straight PC terminals - single pole ▲
Solder lug terminals - four pole
II II III
11166 ON - ON
11169 ON OFF ON
11167 MOM OFF MOM
11168 ON OFF MOM
II II III
11236 ON - ON
II II III
11246 ON - ON
II II III
11256 ON - ON
➞Keyway
➞Keyway
➞Keyway
➞Keyway
(1.023)
(.551)
(.236)
(.196)
(.098)
10
11
12
26.00
5.00
14.00
6.00
2.50
EPOXY
8
7
9
17.005.7011.30
4.30
(.169)
20˚
(.444) (.224) (.669)
3
(.157)
(.019)
I
II
III
4.00
0.50
Ø12.00
(.472 DIA)
Ø3.00
(.118 DIA)
Ø6.35-40UNS
(1/4-40UNS)
21
1
2
3
EPOXY
0.50
4.00
14.00
III
II
I
(.019)
(.157)
(.551)
1
(.527)(.248)
(.027)
(.444)
26˚
(.314)
(.118 DIA)
(1/4-40UNS)
11.30 6.30 13.40 8.00
0.70
Ø6.35-40UNS
Ø3.00
(.039)
(.374)
9.50
1.00
(.157)
4.00
(.062 DIA)
Ø1.60
23
4
5
6
1
2
3
0.70
13.406.3011.30
26˚
(.444)
(.027)
(.248) (.527)
3
I
II
III
(.551)
14.00
Ø3.00
Ø6.35-40UNS
(1/4-40UNS)
(.118 DIA)
(.551)
14.00
(.157)
(.019)
4.00
0.50
9.50
(.374) EPOXY
(.039)
1.00
(.236)
6.00
6.00
4.00
(.157)
(.236)
Ø1.60
(.062 DIA)
21
14.00
III
II
I
9
8
7
(.551)
3
4
5
6
(.787)
20.00
(.669)(.224)(.444)
(1/4-40UNS)
Ø6.35-40UNS
(.118 DIA)
Ø3.00
20˚
(.472 DIA)
(.169)
4.30
11.30 5.70 17.00
Ø12.00
0.50
4.00
(.019)
(.157)
1.00
(.039)
(.236)
6.00
(.374)
9.50
EPOXY
(.236)
(.157)
(.062 DIA)
Ø1.60
4.00
6.00
21
A-68 APEM www.apem.com
11000 series
Professional toggle switches - threaded bushing Ø 6,35 (1/4)
A
Right angle terminals - horizontal - single pole
Straight PC terminals - four pole ▲
PANEL CUT-OUT
With KWith X408
Standard sealing option sealing option
I II III
11136W ON - ON
II II III
11266 ON - ON
➞Keyway
➞Keyway
(1.023)
(.551)
10
11
12
26.00
14.00
8
7
9
17.005.7011.30
4.30
(.169)
20˚
(.444) (.224) (.669)
3
I
II
III
Ø12.00
(.472 DIA)
Ø3.00
(.118 DIA)
Ø6.35-40UNS
(1/4-40UNS)
(.157)
(.019)
4.00
0.50
6.00
(.236)
(.039)
1.00
EPOXY
9.50
(.374)
6.00
4.00
Ø1.60
(.062 DIA)
(.157)
(.236)
21
1
3
2
1
0.50
4.00
III
II
I
(.019)
(.157)
26˚
(.314)
(.118 DIA)
(1/4-40UNS)
8.00
Ø6.35-40UNS
Ø3.00
(.157)
4.00
(.062 DIA)
Ø1.60
(.364)(.417)
(.444) (.232) (.543)
(.043)
(.157)
(.173)
(.551)
(.196)
(.051)
(.039)(.015)
(.200)
(.364)
11.30 5.90 13.80
1.10
0.40 1.00
9.2710.60
5.08
14.00
9.27
4.40
4.00
1.30
5.00
EPOXY
23
Ø6.50 Ø2.20
5.20
(.255 DIA) (.086 DIA)
(.204)
(.255 DIA)
Ø6.50
1.10
2.70
(.106)
(.043)
Ø6.50
(.255 DIA)
(.106)
2.70
▲ Models with straight PC terminals are also available with 3,5 mm (.138) short terminals, functions 6, 9, 7 and 8. On request.
APEM www.apem.com A-69
11000 series
Professional toggle switches - threaded bushing Ø 6,35 (1/4)
A
CONTACT MATERIALS
ASilver
AD2 Gold plated silver (2 micron gold)
DSolid gold rivet
See "Special options" for contacts X780 (solid silver/nickel rivet) and contacts X910 (for peak currents).
FINISH
Blank Bright chrome finish
GMatt black finish on bushing, lever and hardware.
Other finish, consult factory.
SEALING
Epoxy sealed terminals are standard.
Blank No sealing except standard
KFront panel sealing by O-ring and sealing washer. Protects the switch
against water and dust.
Panel seal withstands 1 bar pressure and remains sealed even when
switch is operated.
Sealing by two O-rings, see X408 under "Special options".
Sealing boots : see section H.
LEVERS
-13
Standard
-26
Cylindrical
Not available on 11000W model.
➀ O-ring ➁ Sealing washer
(.417 DIA)
(.090)
(.464 DIA)
(.251 DIA)
(.228)
Ø10.60
Ø11.80
5.80
2.30
Ø6.40
1
2
(.104 MAX)
1.5Maxi
(.118 DIA)
(.444)
(.275)
7.00
11.30
Ø3.00
(.275)
(.354)
(.078 DIA)
7.00
9.00
Ø2.00
A-70 APEM www.apem.com
11000 series
Professional toggle switches - threaded bushing Ø 6,35 (1/4)
A
AGENCY APPROVALS
CECC 96201-005 (high level - contacts X780)
CECC 96201-008 (low level - contacts AD2 or D)
SPECIAL OPTIONS
X408 Front panel sealing by two O-rings. Flatted bushing for precise
orientation.
Protects the switch against water and dust.
Panel seal withstands 1 bar pressure and remains sealed even when
switch is operated.
X780 Solid rivet, gold plated silver/nickel alloy
Not available on 11000W model.
Availability : consult factory for details of approved models.
Marking : to order switches marked CECC , complete above box with ”CECC”.
Blank : no agency approval required.
Preferential lists : see specifications.
X408 ➀ O-rings
➞Flat
(.157 MAX)
4.00 Maxi
(.216)
5.50
1
CECC
X910 Switches for peak currents
Peak current up to 80A (1 ms) 60VDC - single/double pole
Single pole
11136 X910 ON - ON
Double pole
11146 X910 ON - ON
• Contacts : solid rivet - silver/nickel alloy (AgNi)
• Max. current/voltage rating :
3/80A (1 ms) 60VDC - 10.000 cycles
2/30A 250VAC - 10.000 cycles
• Further specifications and dimensions : see previous pages
• General information on peak currents : see end of catalogue.
APEM www.apem.com A-71
12000 series
Professional toggle switches - threaded bushing ø 11.9 (15/32)
Specifications
A
MATERIALS
• Case : diallylphthalate (DAP)
• Actuator : brass, chrome plated
• Bushing : brass, nickel plated
• Housing : brass, nickel plated
• Contacts
A : silver
AD2 : gold plated silver
(2 microns gold)
X780 : solid rivet - gold plated
silver/nickel alloy
D: solid gold rivet
X910 : silver/nickel alloy (for
peak currents, see “Special
options”)
• Terminal seal : epoxy
Note : AD2 and X780 contacts
can be used for high level
applications. In this case, the
gold layer is considered only as
a protection against oxidation
during storage.
Tin dipped terminals available,
see "Special options".
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load : Peak currents, refer to “Special options”.
- silver contacts (A-AD2-X780) : 2A 250VAC - 4A 125VAC - 4A 30VDC
- gold contacts (D) : 200mA 250VAC - 400mA 125VAC
• Minimum load : AD2-X780-D contacts : 10mA 50mV, 10µA 5V min.
• Initial contact resistance : 10 mΩmax.
• Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength :
1.000 Vrms 50 Hz min. between terminals
2.000 Vrms 50 Hz min. between poles and between terminals and frame
• Contact bounce : 2 ms max.
• Electrical life at full load :
Contacts Max. current/voltage rating 2 positions 3 positions
A 2A 250VAC - 4A 125VAC - 4A 30VDC 50.000 50.000
AD2 2A 250VAC - 4A 125 VAC - 4A 30VDC 20.000 20.000
X780 (Gold plating : 100mA 30VDC max.)
D 200mA 250VAC - 400mA 125VAC 80.000 50.000
Low level or mechanical life 150.000 100.000
GENERAL SPECIFICATIONS
• Torque :1,50 Nm (1.10 Ft.lb) max. applied between the 2 nuts
• Standard panel thickness : 4,5 mm (.177) max.
• Operating temperature : -40°C to +85°C
RELIABILITY - RUN-IN TEST
Upon request, each individual switch can be submitted to a low level run-in
test of 50 or 250 cycles to ensure suitability for special applications requiring
a very high level of reliability (military, space, etc.).
Number of cycles
AGENCY APPROVALS/PREFERENTIAL LISTS
QPL (Europe only)
MUAHAG
Designed to MIL specifications
Availability : consult factory for details of approved models.
Marking : to order switches marked CECC, complete appropriate box of
ordering format. Preferential lists do not appear on the switches.
CECC 96201-005
CECC 96201-008
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
Packaging unit : 2 pole models : 25 pieces - 3 & 4 pole models : 20 pieces.
A-72 APEM www.apem.com
12000 series
Professional toggle switches - threaded bushing ø 11.9 (15/32)
Overview
A
12
SERIES
Terminals and bushings
1Solder lug terminals
2Straight PC terminals
All models with threaded
bushing Ø 11,9 (15/32).
Bushing Ø 15 (.590), see
X822 under "Special
options".
Number of poles
4Double pole
5Three pole
6Four pole
Electrical functions
6ON - ON
9ON OFF ON
7MOM OFF MOM
8ON OFF MOM
5- ON MOM
4ON ON ON
ON ON MOM ▲
MOM ON MOM ▲
Function 4
.
▲
Must not have blank
in "momentary" box.
Momentary for
function 4
1R ON ON MOM
2R MOM ON MOM
Leave blank for other
functions.
Finish
Blank Bright chrome finish
GMatt black finish on
bushing, actuator and
hardware.
Satin chrome finish, see
"Special options".
Fluorescent tip
Blank None
0.38 White fluorescent
tip to lever
Available with matt black
finish (G) only.
Special options
Blank No special
requirement
X408 Front panel sealing
by two O-rings
X822 Bushing Ø 15 (.590)
Other : see foll. pages.
Contact materials
ASilver
AD2 Silver, gold plated
(2 micron gold))
DSolid gold rivet
See "Special options" for
X780 (solid silver/nickel
rivet) and X910 (for peak
currents).
Sealing
Blank Epoxy sealed
terminals standard
KFront panel sealing by
one O-ring and
sealing washer
Sealing by two O-rings, see
X408, "Special options"
box.
Levers
-13 Standard lever
-12 Short lever
Approvals
CECC
Availability :
Consult factory for details
of approved models.
Locking levers
-1V 1 locked position
-2V 2 locked positions
-3V 3 locked positions
Other, consult factory.
ABOUT THIS SERIES
On the following pages, you will find successively :
- model structure of switches
- options in the same order as in above chart
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
Sealing boots are available to protect the switches against dust and water. They are presented in section H.
Mounting accessories : standard hardware supplied with all models : 2 hex nuts 14 (.551) across flats and 1 locking ring.
Standard and special hardware available are presented in section I.
Security caps are available to prevent inadvertent lever operation. They are presented in section I.
APEM www.apem.com A-73
12000 series
Professional toggle switches - threaded bushing ø 11.9 (15/32)
Solder lug terminals : 12100
A
Solder lug terminals - four pole
Solder lug terminals - three pole
Solder lug terminals - double pole
MODEL
STRUCTURE
Function 6 Other functions
• Epoxy sealed terminals standard
I II III
12146 ON - ON
12149 ON OFF ON
12147 MOM OFF MOM
12148 ON OFF MOM
12144* ON ON ON
12144 1R* ON ON MOM
12144 2R* MOM ON MOM
12145 - ON MOM
I II III
12156 ON - ON
12159 ON OFF ON
12157 MOM OFF MOM
12158 ON OFF MOM
* Function 4 : SP in DP case - connections, see end of catalogue.
I II III
12166 ON - ON
12169 ON OFF ON
12167 MOM OFF MOM
12168 ON OFF MOM
12164* ON ON ON
12164 1R* ON ON MOM
12164 2R* MOM ON MOM
* Function 4 : DP in 4P case - connections, see end of catalogue.
Shown with standard lever (-13)
➞Keyway
➞Keyway
➞Keyway
➞Keyway
1 2 3 1 2 3
(.098)
(.047)
(.066)
(.196)
1.70
5.00
1.20
2.50
(.374)
(.039)
9.50
1.00
(1.023)
(.551)
(.236)
(.236 DIA)
(15/32-32UNS)
(.157)
(.681)
(.019)
(.716 DIA)
(.196)
(.098)
10
11
12
I
II
III
A
17.3026.00
Ø18.20
5.00
14.00
4.00
0.50
6.00
2.50
Ø6.00
Ø11.90-32UNS
EPOXY
8
7
9
(.539)(.429)
10.90 13.70
(.039)
1.00
321
EPOXY
Ø11.90-32UNS
Ø6.00
2.50
6.00
0.50
4.00
14.00
5.00
Ø18.20
17.30
A
III
II
I
9
8
7
(.098)
(.196)
(.716 DIA)
(.019)
(.681)
(.157)
(15/32-32UNS)
(.236 DIA)
(.236)
(.551)
4
5
6
(.787)
20.00
13.7010.90
(.429) (.539)
1.00
(.039)
321
3
(.551)
(.236)
(.236 DIA)
(15/32-32UNS)
(.157)
(.681)
(.019)
(.716 DIA)
(.098)
4
5
6
I
II
III
A
17.30
Ø18.20
14.00
4.00
0.50
6.00
2.50
Ø6.00
Ø11.90-32UNS
5.00
(.196)
EPOXY
1
2
3
(.539)(.429)
10.90 13.70
(.039)
1.00
21
Function 6
Typical angle of throw (A)
24°
Functions 9, 7, 8, 4 20°
Function 5 12°
A-74 APEM www.apem.com
12000 series
Professional toggle switches - threaded bushing ø 11.9 (15/32)
Straight PC terminals : 12200
A
Straight PC terminals - four pole ▲
Straight PC terminals - three pole ▲
Straight PC terminals - double pole ▲
PANEL CUT-OUT
With KWith X408
Standard sealing option sealing option
I II III
12246 ON - ON
I II III
12256 ON - ON
I II III
12266 ON - ON
➞Keyway
➞Keyway
➞Keyway
(.551)
(.236 DIA)
(15/32-32UNS)
4
5
6
14.00
Ø6.00
Ø11.90-32UNS
1
2
3
3
(.157)
(.681)
(.019)
I
II
III
A
17.30
4.00
0.50
(.039)
1.00
6.00
(.236)
EPOXY
(.374)
9.50
6.00
4.00
(.157)
(.236)
Ø1.60
(.062 DIA)
(.716 DIA)
Ø18.20
13.7010.90
(.429) (.539)
1.00
(.039)
21
Ø11.90-32UNS
Ø6.00
14.00
Ø18.20
9
8
7
(.716 DIA)
(15/32-32UNS)
(.236 DIA)
(.551)
4
5
6
0.50
4.00
17.30
III
II
I
(.019)
(.681)
(.157)
9.50
(.374) EPOXY
6.00
(.236)
1.00
(.039)
(.236)
(.157)
(.062 DIA)
Ø1.60
4.00
6.00
(.787)
20.00
13.7010.90
(.429) (.539)
1.00
(.039)
123
A
(1.023)
(.551)
(.236)
(.236 DIA)
(15/32-32UNS)
(.157)
(.681)
(.019)
(.716 DIA)
10
11
12
I
II
III
A
17.3026.00
Ø18.20
14.00
4.00
0.50
6.00
Ø6.00
Ø11.90-32UNS
EPOXY
8
7
9
(.039)
(.374)
9.50
1.00
6.00
4.00
Ø1.60
(.062 DIA)
(.157)
(.236)
13.7010.90
(.429) (.539)
1.00
(.039)
321
(.492 DIA)
(.377)
(.137 DIA)
Ø12.50 Ø3.50
9.60
(.472 DIA)
(.200)
(.066)
Ø12.00
5.10
1.70
5.10
(.200)
Ø12.00
(.472 DIA)
▲ Models with straight PC terminals are also available with 3,5 mm (.138) short
terminals, functions 6, 9, 7 and 8. On request.
APEM www.apem.com A-75
12000 series
Professional toggle switches - threaded bushing ø 11.9 (15/32)
A
Epoxy sealed terminals are standard.
Blank No sealing except standard.
KFront panel sealing by one O-ring and sealing washer.
Protects the switch against water and dust.
Panel seal withstands 1 bar pressure and remains sealed even
when switch is operated.
Sealing by two O-rings, see X408 under "Special options".
Sealing boots : see section H.
CONTACT MATERIALS
ASilver
AD2 Silver, gold plated (2 micron gold)
DSolid gold rivet (except functions 4 and 5)
See "Special options" for contacts X780 (solid silver/nickel rivet) and contacts X910 (for peak currents).
FINISH
Blank Bright chrome finish
GMatt black finish on bushing, lever and hardware.
For satin chrome finish, see "Special options".
SEALING
FLUORESCENT TIP
Blank None
0.38 White fluorescent tip.
Becomes luminous when submitted to ultra-violet rays.
Standard lever Locking lever
Available with matt black finish (option G) only.
➀ O-ring ➁ Sealing washer
1
2
(.118)
3.00
4 Maxi
(.157 max)
21
A-76 APEM www.apem.com
12000 series
Professional toggle switches - threaded bushing ø 11.9 (15/32)
A
ACTUATORS
Levers
Locking levers
-13
Standard
-12
Short lever
-1V
1 locked position (function 6)
Typical angle of throw : 26°
Consult factory for other locking lever options.
-2V
2 locked positions (function 6)
Typical angle of throw : 26°
-3V
3 locked positions (functions 9 and 4)
Typical angle of throw : 20°
SPECIAL OPTIONS
Blank No special requirement.
X408 Front panel sealing by two O-rings. Flatted bushing for precise
orientation. Panel thickness : 8 mm (.314) max., 3 mm (.118) min.
Protects the switch against water and dust.
Panel seal withstands 1 bar pressure and remains sealed even when
switch is operated.
X545 Lever, bushing, housing, nuts and washers with satin chrome finish.
Dash compulsory before lever code.
Security caps : see section I.
➞Keyway
➀ O-rings
➞Flat
Ø7.00
(.275 DIA)
11.90
(.468) 19.40
(.763)
(.468)
11.90 (.811)
20.60
(.275)
Ø7.00
(.468) (.464)
(.196 DIA)
Ø5.00
11.8011.90
(.409)
10.40
1
(.409)
10.40
(.590 DIA X 100 IS) (.500)
(.255 Max)
6.5 Maxi
Ø15 X 100 SI 12.70
1
(.511)
13.00
Ø15.20
(.598 DIA)
APEM www.apem.com A-77
12000 series
Professional toggle switches - threaded bushing ø 11.9 (15/32)
A
AGENCY APPROVAL
X822 Threaded bushing Ø 15 (.590), with double flat
Not available with function 5 or locking levers.
Includes front panel sealing and X780 contact material.
X780 Solid rivet - gold plated silver/nickel alloy contacts
Not available with function 5.
SPECIAL OPTIONS (continued)
CECC 96201-005 (high level - contacts X780)
CECC 96201-008 (low level - contacts AD2 or D)
Availability : consult factory for details of approved models.
Marking : to order switches marked CECC, complete above box with ”CECC”.
Blank : no agency approval required.
Preferential lists : see specifications.
➞Flat
➀ O-rings
X822
CECC
X910 Switches for peak currents
Peak current up to 80A (1 ms) 60VDC - double pole
12146 X910 ON - ON
• Contacts : solid rivet - silver/nickel alloy (AgNi)
• Max. current/voltage rating :
3/80A (1 ms) 60VDC - 10.000 cycles
2/30A 250VAC - 10.000 cycles
• Further specifications and dimensions : see previous pages
• General information on peak currents : see end of catalogue.