Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
TRIMPOT®POTENTIOMETER
PANEL MOUNTING OPTIONS
AND HARDWARE
Many Trimpot®Potentiometers are
available for panel mount application.
This product option provides for
maximum design flexibility.
To order Trimpot®Potentiometers with
panel mount hardware attached by the
factory, simply add an “M” or “Z”
suffix to the Bourns part number per
Table I.
Example:
3006P-1-100Z
To order military Trimpot®Potentiometers
with panel mount hardware attached by
the factory, order the military part
number and add “with panel mount
attached.”
Example:
RT12C2PRC, with panel mount
attached.
To order panel mounting accessories for
customer installation, simply use the part
number per Table II.
Example:
H83P
NOTE: For complete product specifica-
tions, see data sheet for the trimmer
model.
Torque - Apply maximum 8 in. lbs. on
mounting nut when mounted on panel.
6.76 ± .38
(.266 ± .015)
HEX NUT AND
LOCKWASHER
10.31
(.406)
7.95
(.313) 33.35
(1.31)
6.35
(.25)
1.52 TO 3.30
(.06 TO .13)
BUSHING
10-32
NF-2 THD
5.94
(.234)
ADJ. SLOT
2.54
(.100)
.635
(.020)
.762
(.030)
MAX.
LONG
WIDE
DEEP
Models 3005/3006/3009
3.81
(.150)
20.32
(.80)
6.35
(.25) #10-32 UNF-2A THD.
2.54
(.100)
7.92
(.312)
PANEL MAX.
3.30
(0.13)
ADJ. SLOT
2.54
(.100 )
.508
(.020)
.762
(.030)
LONG
WIDE
DEEP
Models RT12/RJ12, 3057/3059
Factory Installed Panel Mount
NOTES:
1. PROVIDED WITH LOCKWASHER AND MOUNTING
NUT.
2. RECOMMEND PANEL HOLES. #10 DRILL .194
(.008)
NOTES:
1. PROVIDED WITH LOCKWASHER AND MOUNTING
NUT.
2. RECOMMEND PANEL HOLE SIZE #7 DRILL .200
(.008)
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
6.10
(.240)
3.05
(.120)
BUSHING
10-32 UNF-2A
THD.
OPT. BEND
DOWN ANTI-
ROTATION TAB
6.35
(.250)
10.92
(.430)
.826 ± .038
(.033 ± .020)
11.68
(.460)
PANEL
3.3
(.130)
MAX
7.37
(.290)
OPTIONAL FOR
ANTI-ROTATION NUB
= 7 DRILL
PANEL LAYOUT
NOTES:
Provided with lockwasher and mounting nut
7.62
(.300)
4.06
(.160)
BUSHING
10-32 UNF-2A
THD.
OPT. BEND
DOWN ANTI-
ROTATION TAB
13.97
(.550)
11.43
(.450)
14.99
(.590)
10.16
(.400)
PANEL LAYOUT
6.10
(.240)
3.05
(.120)
BUSHING
10-32 UNF-2A
THD.
OPT. BEND
DOWN ANTI-
ROTATION TAB
11.43
(.450)
.826 ± .038
(.033 ± .020)
11.68
(.460)
PANEL LAYOUT
NOTES:
1 Provided with lockwasher and mounting nut
ADJ. SLOT
.243
(.010)
.064
(.003)
.064
(.003)
LONG
WIDE
DEEP
.200
(.008)
.132
(.005) OPTIONAL FOR
ANTI-ROTATION NUB
= 7 DRILL
.200
(.008)
.132
(.005)
OPTIONAL FOR
ANTI-ROTATION NUB
= 7 DRILL
.200
(.008)
.132
(.005)
7.37
(.290)
6.35
(.250)
PANEL
3.3
(.130)
MAX
6.35
(.250)
PANEL
3.3
(.130)
MAX
ADJ. SLOT
.243
(.010)
.064
(.003)
.064
(.003)
LONG
WIDE
DEEP
ADJ. SLOT
.243
(.010)
.064
(.003)
.064
(.003)
LONG
WIDE
DEEP
Models RT22/RTR22/RJ22 3250/3252 Models RT24/RTR24/3290
H and W Styles - 3290 X & W Styles-
RT24/RTR24
Models 3292
X, L and W Styles
Factory Installed Panel Mount
NOTES:
1. PROVIDED WITH LOCKWASHER AND MOUNTING
NUT. NOTES:
1. PROVIDED WITH LOCKWASHER AND MOUNTING
NUT.
NOTES:
1. PROVIDED WITH LOCKWASHER AND MOUNTING
NUT.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
H-65P Panel Mount
1/2 Inch Square
Multiturn Models
H-83P Panel Mount
Adapter for Models 3005 AND 3006
The H-83P Adapter is used with Models
3005 and 3006. Order separately and
simply snap fit the trimmer in the plastic
case. The H-83P with lock-washer and
mounting nut is available in 50-piece
lots.
H-58P Panel Mount
1-1/4 Inch Rectangular
Multiturn Modules
10.0
(.394)
HEX NUT AND
LOCKWASHER
10.31
(.406)
MAX.
7.95
(.313) 33.35
(1.31)
6.35
(.250)
TO
BUSHING
10-32
NF-2 THD
5.94
(.234)
7.62
(.300)
4.06
(.160)
BUSHING
10-32 UNF-2A
THD.
OPT. BEND
DOWN ANTI-
ROTATION TAB
6.35
(.250)
13.97
(.550)
11.43
(.450)
14.99
(.590)
10.16
(.400)
PANEL LAYOUT
22.10
(.870) 7.62
(.300)
5/16-32
UNEF
THREAD
5.54
(.218)
9.53
(.375)
9.53
(.375)
ADJ. SHAFT
RECESSED 5/16
ADJ. SLOT
.243
(.010)
.064
(.003)
.064
(.003)
LONG
WIDE
DEEP
1.52
(.060) 3.30
(.130) PANEL MAX.
3.30
(0.13)
ADJ. SLOT
2.54
(.100)
.635
(.250)
.762
(.030 )
LONG
WIDE
DEEP
= 7 DRILL
.200
(.008)
OPTIONAL FOR
ANTI-ROTATION NUB
.132
(.005)
SEE TABLE II FOR PANEL MOUNT PART NUMBER
Customer Installed Panel Mount - Unsealed
NOTES:
1. PROVIDED WITH LOCKWASHER AND MOUNTING
NUT.
2. RECOMMEND PANEL HOLES. #10 DRILL .194
(.008)
NOTES:
1. PROVIDED WITH LOCKWASHER AND MOUNTING
NUT.
2. DRAWINGS SHOWN WITH TRIMMER. ORDER PART
SEPARATELY
NOTES:
1. DRAWINGS SHOWN WITH TRIMMER. ORDER PART
SEPARATELY
*SPECIFY H82 IF PANEL SEAL IS REQUIRED.
H-114P/115P/116P Panel Mount
3/8 Inch Square Multiturn Models
Notes:
1. Provided with lockwasher and
mounting nut.
2. Drawings shown with trimmer. Order
part separately.
H-117P Panel Mount
3/8 Inch Square Multiturn Models
Notes:
1. Provided with lockwasher and
mounting nut.
2. Drawings shown with trimmer. Order
part separately.
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications
Customer Installed Panel Mount
6.10
(.240)
3.05
(.120)
BUSHING
10-32 UNF-2A
THD.
OPT. BEND
DOWN ANTI-
ROTATION TAB
6.35
(.250)
10.92
(.430)
(H-114P)
11.68
(.460)
7.37
(.290)
PANEL LAYOUT
11.43
(.450)
(H-115P)
(H-116P)
ADJ. SLOT
.243
(.010)
.064
(.003)
.064
(.003)
LONG
WIDE
DEEP
8.179
(.322)
(H-115P)
(H-116P)
8.255
(.325)
(H-114P)
PANEL MAX.
3.30
(0.13)
= 7 DRILL
5.08
(.200)
OPTIONAL FOR
ANTI-ROTATION NUB
.132
(.005)
6.86
(.270)
4.06
(.160)
BUSHING
10-32 UNF-2A
THD.
6.10
(.240)
8.76 ± .38
(.345 ± .015)
11.68
(.460)
7.62
(.300)
PANEL LAYOUT
11.68
(.460)
ADJ. SLOT
2.44
(.096)
.635
(.025)
.635
(.025)
DIA.
WIDE
DEEP
2.54
(.100)
REF.
2.54
(.100)
REF.
5.72
(.225)
REF.
DIA.
5.08
(.200)
OPTIONAL FOR
ANTI-ROTATION LUG
1.32
(.052)
TABLE I
FACTORY INSTALLED
PANEL MOUNTS
P/N WITH
STANDARD P/N PANEL MOUNT
3005P-1-(RC) 3005P-1-(RC) Z
3006P,Y, or W-1-(RC) 3006P,Y, or W-1-(RC) Z
3009P or Y-1-(RC) 3009P or Y-1-(RC) Z
3057L,J,P, or Y-1-(RC) 3057L,J,P, or Y-1-(RC) M
3059L,J,P, or Y-1-(RC) 3059L,J,P, or Y-1-(RC) M
3250L or W-1-(RC) 3250L or W-1-(RC) M
3252L or W-1-(RC) 3252L or W-1-(RC) M
3290 H or W-1-(RC) 3290H or W-1-(RC) M
3292L,W, or X-1-(RC) 3292L,W, or X-1-(RC) M
3296W or X-1-(RC) 3296W or X-1-(RC) M
TABLE II
RETRO-FIT PANEL MOUNTS FOR
INSTALLATION BY CUSTOMER
ORDER PANEL MOUNT
STANDARD P/N P/N
3005P-1-(RC) H-83P
3006P,Y, or W-1-(RC) H-83P
3057L,J,P, or Y-1-(RC) H-58P* SCREW ASSY.
3059L,J,P, or Y-1-(RC) H-58P* SCREW ASSY.
3250L, W, X-(RC) H-65P-1*
3252L or W-1-(RC) H-65P-3*
3252X-1-(RC) H-65P-5*
3290 H or W-1-(RC) H-114P*
3292L-1-(RC) H-115P*
3292W OR X-1-(RC) H-116P*
RT12P,Y,L H-58P* SCREW ASSY.
RJ12P,Y H-58P* SCREW ASSY.
RT22L,W, X,
RTR22L,W, X H-65P-1*
RJ22L,W H-65P-3*
RJ22X H-65P-5*
RT24W /
RTR24W OR X H-114P*
RJR24W OR X H-117P*
*Specify H-82 if panel seal is required.
7.37
(.290)
4.83
(.190)
.381
(.015)
1.02
(.040)
STAINLESS STEEL
CUP WASHER
.89
(.035)
RUBBER O RING
B
C
A
4.83
(.190)
H-82 Panel Seal
For all panel mounts with size 10-32
bushings.
To be used with the following to provide
panel seal:
H-58P
H-65P-1
H-65P-3
H-65P-5
H-114P
H-115P
H-116P
H-117P
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
Hardware For Special Mounting Applications
H-25/H-28 Stacking Straps
Models 3250, 3252 (H-25) and 3292
(H-28).
DIMENSIONS H-25 H-28
A .236 .178
(.093) (.070)
B .363 .318
(.143) (.125)
C 1.321 1.064
(.520) (.419)
THICKNESS .51
(.02)
REV. 01/12
