REV. Status REVISION 10/22/99 TS REVISION A CHANGED F SEE PG. 2 11/22/99 TS REVISION B CHANGED HIPOT, SAFETY AND SCHEMATIC. 05/21/01 MP REVISION C REVD HI-POT 09/20/04 MP REVISION D ADDED RoHS & UPDATED LABEL 01/26/06 MP REVISION E CHG TUV FILE # WAS 810/89 (EN60950 & VDE 0551). CLARIFIED PIN OUTS 04/19/07 YS REVISION F UPDATED SAFETY 11/15/07 YS REVISION G UPDATED SAFETY 10/19/12 MP REVISION H SAFETY NOTES ADDED 03/20/13 MP THREE FLANGE DUAL PRIMARY 5.0VA PC BOARD POWER TRANSFORMER A. Electrical Specifications (@ 25C) Maximum Power; 5.0VA Primary Voltage and Frequency; 115/230VAC 50/60Hz Secondary RMS Rating: See Table A Voltage Regulation; 20% TYP @ full load to no load Temperature Rise(normal op. cond.); 30C TYP (45C MAX) A 10% Input Voltage change will proportionally affect transformer sec voltage. The max. allowed wdg temp under abnormal condition is 155C Insulation Resistance: 100MQ MIN @ S5O00VDC, Pri to Sec, Pri to Core, Sec to Core Dielectric Withstand: 3750Vrms 1 minute @ Pri to Sec 1500Vrms 1 minute @ Pri to Core, Sec to Core B. Marking; includes input and output ratings (per sheet 2) C. Safety: Conforms to construction requirement of: UL50851, 2; CSA No. 66.1, 66.2 (from Datecode 1244 and onwards). UL506, UL1411 UL1446 (CLASS 130(B)) S GRe TAY MODEL NUMBER | PL5.0-XX-1308 | Oo N PUPUN> Part No. (See tabulation) EN61558-1, 2-6 we? Safety cerificate file reference: UL 138028, 79781, E92957 Output , CSA 175561 (See tabulation) TUV (P.S.) 4478013415698 Non short-circuit proof safety isolating transformer. Intended for mounting on PCBs and for building into end useequipment. Fuse rating Not intended for series/parallel connection with other transformers. (See tabulation) Mounting hardware may reduce spacing in end use application. D. Mechanical Specifications; Date code and country of origin 35.6(1.4) MAX co u ft 4 4 4 mT yg 4.75(0.187)MIN 0.635+0.127(0.025+0.005) || SQUARE 8 PLACES 36.37+0.38(1.432+0.015) 6 3 oh 112 4 o oa 10 +0.76 +0.03 41.28 60 (1.625 Oo T. a 9 1] 4 feb | 7 TOLERANCES (mm) CLEARANCE HOLE FOR 440 (M3) MS - a " < 4202 $2.87(0.113) MIN. 2 PLACES 4s 204 03 20 s 50+ 0.4 PREPARED BY: 27.00.38(1.065+0.015) Mathi Pitchai | NOTE: BOARD WASHING IS NOT RECOMMENDED FOR THESE PARTS ENGINEER: DRAWING CONTROL NO.] REV MODEL DESCRIPTION MODEL SPECIFICATION Mathi Pitchai PA112225 H TRANSFORMER PL5 O-XX1 S50B SAFETY ENGINEER CONTENTS OF THIS DRAWING, ARE TAMURA CORPORATION OF AMERICA B. O'Connell | PRIOR NOTICE 1040 UTE ANDREASEN, ORME, 1.100 ESCONDIDO, CA 92029! Dim: mmt[in] SCL: 1/1 | SH: 10F 2 APPROVED: PROPRIETARY NOTICE: THIS DRAWING PRINT OR DOCUMENT AND SUBJECT MATTER DISCLOSED HEREIN ARE PROPRIETARY ITEMS TO WHICH TAMURA CLUSIVE RIGHT OF DISSEMINATION, REPRODUCTION, MANUFA HIS DRAWING, PRINT OR DOCUMENT IS SUBMITTED IN Peter Brune RETAINS THE EX CTURE AND SALE. TI CONFIDENCE FOR CONSIDERATION BY THE RECIPIENT ALONE UNLESS PERMISSION FOR FURTHER DISCLOSURE IS EXPRESSLY GRANTED IN WRITING. REV. Status SEE SHEET 1 PREPARED BY: E. Mounting Footprint; 7|9 10)12 Too r I ot | 25.40+0.38(1.000+0.015) | | | I l I I sores L_ 5.08+0.38(0.200+0.015) 10.2+0.38(0.400+0.015) }- 5.0840.38(0.200+0.015) MODEL NUMBER | PL5.0-XX-1308 | F. Schematic Diagram: PRIMARY INPUT CONNECTIONS SERIES PARALLEL CONNECTION CONNECTION PRI SEC 6.7 =e 12 y ] oO oO 4 J i e 10 230VAC [OP 115VAC 0 0 50/60Hz lL 50/60Hz 30 O, aL. 10 oO, SECONDARY OUTPUT CONNECTIONS PARALLEL SERIES SERIES CONNECTION CONNECTION CONNECTION WITH CENTERTAP SEC 12 __ _ mi | | i OUTPUT 4 10 o so AC + AC CT O OUTPUT ig OUTPUT AC I. 3 e 7 oO 5 | OUTPUT 1o _______ G. Table A T= Time lag PART NO PARALLEL SERIES SERIES WITH CT OUTPUT SECONDARY , AC RMS AC RMS AC RMS FUSE REQD VOLTS | AMPS| VOLTS | AMPS VOLTS AMPS EACH WINDING PLS.O10130B} 5.0 | 1.00 | 10.0 0.50 |5.0CT5.0 0.50 |2X5.0V T 0.50A PLS.0O-12150B} 6.3 | 0.80 | 12.6 0.40 |6.3-CT6.3 0.40 |2X6.5V T 0.40A PL5.016-150B} 8.0 | 0.62 | 16.0 0.51 |8.0CT8.0 0.31 |2X8.0V T 0.315A PL5.020-1350B} 10.0 | 0.50 | 20.0 0.25 |10.0CT10.0} 0.25 |2X10.0V|_ T 0.25A PLS.O24130B] 12.0 | 0.42 | 24.0 0.21 |12.0CT12.0] 0.21 |2xX12.0V|_ T 0.25A PLS.0O-28150B} 14.0 | 0.36 | 28.0 0.18 |14.0CT14.0] 0.18 |2xX14.0V|_ IT 0.20A Mathi Pitchai |PL5.0-36130B] 18.0 | 0.28 | 36.0 0.14 |18.0-CT18.0] 0.14 |2xX18.0V| T 0.16A ENGINEER: DRAWING CONTROL NO.] REV MODEL DESCRIPTION MODEL SPECIFICATION Mathi Pitchai PA112225 H TRANSFORMER P [5 O _ X X _ 1 3 O B SAFETY ENGINEER CONTENTS OF THIS DRAWING, ARE TAMURA CORPORATION OF AMERICA B. OConnell |PRIOR NOTICE oo eT A RAS eT ye eset 22028) DIM: mmfin] SCL: 1/1 |sH 2 0F 2 APPROVED: Peter Brune PROPRIETARY NOTICE: THIS DRAWING PRINT OR DOCUMENT AND SUBJECT MATTER DISCLOSED HEREIN ARE PROPRIETARY ITEMS TO WHICH TAMURA RETAINS THE EXCLUSIVE RIGHT OF DISSEMINATION, REPRODUCTION, MANUFACTURE AND SALE. THIS DRAWING, PRINT OR DOCUMENT IS SUBMITTED IN CONFIDENCE FOR CONSIDERATION BY THE RECIPIENT ALONE UNLESS PERMISSION FOR FURTHER DISCLOSURE IS EXPRESSLY GRANTED IN WRITING.