Visit us at
www.Anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model BD1722J50200AHF
Rev A
Ultra Low Profile 0805 Balun
50Ω to 200Ω Balanced
Description
The BD1722J50200AHF is a low profile sub-miniature balanced to
unbalanced transformer designed for differential inputs and output locations on next
generation wireless chipsets in an easy to use surface mount package covering the
DCS, PCS, UMTS and CDMA frequencies. The BD1722J50200AHF is ideal for
high volume manufacturing and is higher performance than traditional ceramic and
lumped element baluns. The BD1722J50200AHF has an unbalanced port
impedance of 50Ω and a 200Ω balanced port impedance. This transformation
enables single ended signals to be applied to differential ports on modern
semiconductors. The output ports have equal amplitude (-3dB) with 180 degree
phase differential. The BD1722J50200AHF is available on tape and reel for pick and
place high volume manufacturing.
Detailed Electrical Specifications*:
Specifications subject to change without notice.
ROOM (25°
°°
°C)
Parameter Min. Typ. Max Unit
Frequency 1.7 2.2 GHz
Unbalanced Port Impedance 50 Ω
Balanced Port Impedance 200 Ω
Return Loss 15 20 dB
Insertion Loss* 0.5 0.7 dB
Amplitude Balance 0.6 0.9 dB
Phase Balance 4 8 Degrees
Power Handling 2 Watts
Operating Temperature -55 +85 ºC
Features:
• 1.7 – 2.2 GHz
• 0.7mm Height Profile
• 50 Ohm to 2 x 100 Ohm
• DCS/PCS/ UMTS/CDMA
• Low Insertion Loss
• Input to Output DC Isolation
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
• Halogen Free
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Mechanical Outline
-Dimensions are in Millimeters
2.04±0.10
1.29±0.10
0.68±0.07 1 2 3
656x
0.30
6x
0.22
4x 0.65
6x 0.98
Orientation Marker
Denotes Pin Location
4
Orientation Marker
Denotes Pin Location
TOP VIEW (Near Side) SIDE VIEW BOTTOM VIEW (Far Side)
5
4
2
1
6
3
Pin
Balanced Port
GND
NC
Balanced Port
GND/DC Feed
Unbalanced Port
Designation
2x 0.15
4x 0.37
+RF GND
Visit us at
www.Anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model BD1722J50200AHF
Rev A
Typical Broadband Performance: 0 GHz. to 6.0 GHz.
Visit us at
www.Anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model BD1722J50200AHF
Rev A
Typical Performance: 1.7 GHz. to 2.2 GHz.
Visit us at
www.Anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model BD1722J50200AHF
Rev A
Mounting Configuration:
In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be
used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet
published specifications.
All of the Xinger components are constructed from organic PTFE based composites which possess excellent
electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and
ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier.
An example of the PCB footprint used in the testing of these parts is shown on the next page. An example of a DC-
biased footprint is also shown on the next page. In specific designs, the transmission line widths need to be adjusted
to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances.
No Bias Footprint
6x .41
6x .33
.04
4x .25
.66
3x Transmission
lines
Plated thru holes to ground
Plated thru
holes to
ground
Circuit Pattern
Footprint Pad (s)
Solder Resist
Mounting Footprint
Dimensions are in Millimeters
PART ORIENTATION
TOP DOWN
DC Bias Footprint
6x .41
6x .33
.04
4x .25
.66
3x Transmission
lines
Plated thru
holes to
ground
Circuit Pattern
Footprint Pad (s)
Solder Resist
Mounting Footprint
Dimensions are in Millimeters
Capacitor
Plated thru
holes to
ground
PART ORIENTATION
TOP DOWN
DC Bias
Visit us at
www.Anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model BD1722J50200AHF
Rev A
Packaging and Ordering Information
Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order
quantities are 4000 per reel. See Model Numbers below for further ordering information
.
.25
2.41
1.75
3.50
4.00
1.60
.81
8.00
4.00
2.00
