SPECIFICATION CONTROL DRAWING
307 Constitution Drive Menlo Park, CA 94025, U S A
Wire and
Harnessing
Products
TITLE: 3.81 (0.150) Centers
SOLDER PAK ASSEMBLY FOR AS-4000
SLEEVE: D-128-0029
Unless otherwise specified dimensions are in millimeters.
Inches dimensions are in between brackets. DOCUMENT NO.: D-704-0043
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to
amend this drawing at any time. Users
should evaluate the suitability of the
product for their application.
DCR NUMBER:
D010015 REPLACES: N/A
DRAWN BY:
M. FORONDA DATE:
08-Feb.-01 PROD. REV.
A DOC ISSUE:
1 SCALE:
None SIZE:
A SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
MATERIALS
1. SOLDERSLEEVE WIRE TERMINATOR: D-128-0029, Quantity Per Assembly: 750.
2. CARRIER STRIP: Adhesive Coated High Temperature Tape
APPLICATION
1. This assembly is designed to be used with a Raychem AS-4000 Wire Organization System on
connectors with terminals on 3.81 (0.150) center spacing. For usage parameters, see Raychem Devices
Specification Control Drawing D-128-0029.
2. Wire terminators are to be inspected to Raychem Devices Specification Control Drawing D-128-0029.
