A1611P DFB Laser Modules
Preliminary Data Sheet
March 2001
Features
■Optimized for PAL 60-channel loading
■High output power, up to 20 mW
■Meets
Telcordia Technologies
* 468 specifications
■OC-48 pin compatible
■Negative bias
Applications
■1310 nm forward path
■Broadcast and narrowcast networks
*
Telcordia Technologies
is a trademark of Telcordia Technologies ,
Inc
.
Description
The A1611P 1310 nm DFB laser modules are
designed for broadcast and narrowcast CATV appli-
cations. The modules are highly linear, OC-48 pin-
compatible devices available with standard power
output up to 20 mW.
The A1611P module is optimized for OEM 1310 nm
CATV transmitter designs addressing PAL transmis-
sion with 60-channel loading. The combination of
high-perf ormance specifications and av ailable output
power ensures the fle xibility a CATV system designer
needs to accurately and cost-effectively address the
requirements of any forward-path application.
2Agere Systems Inc.
Preliminary Data Sheet
A1611P DFB Laser Modules March 2001
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are abso-
lute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess
of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended
periods can adversely affect device reliability.
Electrical/Optical Characteristics
Parameter Symbol Condition Min Max Unit
Operating Case Temperature Range TCIF = IOP –20 65 °C
Storage Temperature Range Tstg — –40 70 °C
Lase r Forward Bias — — — 120 mA
Reverse Voltage (Laser) VR——2V
Reverse Voltage Photodiode VRPD ——10V
TEC Current ITEC –20 °C < TC < 65 °C,
TOP = 25 °C,
IF = 100 mA
—1.5A
Table 1. Electrical and Optical Characteristics
Parameter Symbol Condition Min Typ Max Unit
Wa velength λOP IF = IOP
, T = TOP — 1310 ± 10 — nm
Optic al Output Power POIF = IOP 4 — 20 mW
Optical Isolation ISO TOP = 25 °C 30 — — dB
Side Mode Suppression
Ratio SMSR IF = IOP 30 — — dB
Threshold Current ITH 25 °C , BOL — — 30 mA
Operating Current IOP BOL — 65 120 mA
Monitor Operating Current IMON IOP = 0 mA 10 — 200 µA/mW
Thermistor Resistance RTH TOP = 25 °C — 10 ± 1 kΩ @
25 °C —kΩ
Thermisto r Temperatu re
Coefficient TCTH TOP = 25 °C — –4.4 @ 25 °C — %/°C
TEC Current ITEC 20 °C < TC < 65 °C,
TOP = 25 °C,
IF = 100 mA
——1.5A
Table 2. RF Characteristics (PAL 60)
Parameter Symbol Condition Min Typ Max Unit
Frequency Range F — 20 — 860 MHz
Frequency Response |S21| IF = 60 mA,
20 MHz—860 MHz,
TOP = 25 °C
— ± 0.5 — dB
Carrier-to-Noise Ratio CNR — — 51 — dB
Composite Second Order CSO — — 60 — dB
Composite Triple Beat CTB — 65 — dB
Relative Intensity Noise RIN — — < –155 — dB/Hz
3
Agere Systems Inc.
Preliminary Data Sheet
March 2001 A1611P DFB Laser Modules
Electrical Schematics
Figure 1. A1611P Laser Schematic
Figure 2. A1611P Circuit Schematic
1
2
3
4
5
6
7
14
13
12
11
10
9
8
CASE
GROUND
NC
(+)
(–)
(+)
(–)
TEC
(–)
(+)
CASE
GROUND
NC
ISOLATOR
(+)
1-1233(F)
1-1234(F)
1
2
3
4
5
6
7
14
13
12
11
10
9
8
THERMISTOR
TEC (–)
MPC CATHODE
NC
THERMISTOR
dc LAS ER
BIAS
MPD ANODE
CASE GROUND
TEC (+)
CASE
GROUND
CASE
GROUND
MPC CATHODENC
LASER
COMMON (+ )
LASER
MODULATION (–)
LASER
COMMON (+ ) 39 nH
200
Ω
0.01
µ
f
3.3
µ
H
1000 pf
1000 pf
0.01
µ
f
0.01
µ
f
SEE
SEE
3A AN D 3B
FIGURES
FIGURE 4
4
4
Preliminary Data Sheet
A1611P DFB Laser Modules March 2001
Agere Systems Inc.
Electrical Schematics (continued)
Figure 3a. Impedance-Matched Configuration
Figure 3b. Resistive-Matched Configuration
C7
1 pF— 0.01
µ
f0.01
µ
f
VSWR
T1*
3:5
2
3
0.5 pF—2.5 pF
SEE PIN 12,
FIGURE 2
0.01
µ
f
FREQUENCY
RESPONSE
*T1 (75
Ω
) 3: 5.
5 pF
1-1238F.a
SEE PIN 12,
FIGURE 2
37.5 Ω
R1
37.5 Ω
R2
1-1238F.b
Note: When ordering the dc set, the following boards are included: alarm board, 9108-004; TEC board, 9028-004; constant current, 9383-004.
Figure 4. dc Set (Agere Systems-Supplied Option)
CONSTANT ALARM
TEC
J2
1 THERMISTOR
2 THERMISTOR
3 dc LASER BIAS
4 MPD ANODE (CASE GROUND)
5 MPC CATHODE
6 TEC (+)
7 TEC (–)
8 GND
9 GND
10 GND
1
2
3
4
5
6
7
THERMISTOR
TEC (–)
MPC CATHODE
THERMISTOR
dc LASER
BIAS
MPD ANODE
CASE GROUND
TEC (+)
MPC CATHODE
39 nH
200
Ω
0.01
µ
f
3.3
µ
H
1000 pf
1000 pf
0.01
µ
f
0.01
µ
f
1-1238F.c
5
Agere Systems Inc.
Preliminary Data Sheet
March 2001 A1611P DFB Laser Modules
Outline Diagram
Dimensions are in inches and (millimeters).
Pin Information
Table 3. Pin Descriptions
Pin No. Description
1Thermistor
2Thermistor
3 dc Laser Bias (–)
4 MPD Anode, Case Ground (–)
5 MPD Cathode (+)
6 Thermoelectric Cooler (+)
7 Thermoelectric Cooler (–)
8 Case Ground
9 Case Ground
10 NC
11 Laser Common (+)
12 Laser Modulation (–)
13 Laser Common (+)
14 NC
LOCATION FOR LABEL
INCLUDING SERIAL NUMBER
AND DATE CODE
(LABEL NOT SHOWN)
0.049
(1.2)
4 x ø 0.105 (2.7)
0.213
(5.4)
PIN 1
LEADS
0.030 (0.8) WIDE x 0.008 (0.2) THICK
0.40 0 (10 .2) MINI MU M LENGT H
6 SPCS @ 0.100 (2.5)
0.250
(6.4)
0.190 ± 0.03
(5.0þ±þ0.8)
0.078
(2.0)
0.215 ± 0.01
(5.5þ±þ0.25) 0.248
(6.3)
0.040
(1.0)
0.350
(8.9)
0.500
(12.7)
0.820
(20.8)
1.025
(26.0)
1.180
(30.0)
0.365
(9.3)
0.700 ± 0.03
(18.0þ±þ0.8)
1-1181F.a
6Agere Systems Inc.
Preliminary Data Sheet
A1611P DFB Laser Modules March 2001
Laser Safety Informatio n
Class IIIb Laser Product
FDA/CDRH Class IIIb laser product. All versions are Class IIIb laser products per CDRH, 21 CFR 1040 Laser
Safety requirements. All versions are Class 3B laser products per
IEC
* 60825-1:1993. The device has been classi-
fied with the FDA under an accession number to be determined.
This product complies with 21 CFR 1040.10 and 1040.11.
Single- mo de fibe r pigt ail
Wavelengt h = 1.3 µm
Maximum power = 30 mW
Because of size constraints, laser saf ety labeling (including the FDA Class IIIb label) is not affixed to the module but
attached to the outside of the shipping carton.
Product is not shipped with power supply.
Caution: Use of controls, adjustments, and procedures other than those specified herein may result in
hazardous laser radiation e xp osure.
*
IEC
is a registered trademark of The Inter national Electrotechnical Commission.
DANGER
INVISIBLE LASER RADIATION
IS EMITTED FROM THE END
OF FIBER OR CONNECTOR
Avoid direct exposure to beam
Do not view beam directly with
optical instruments
INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR
Avoid exposu re to beam
Class 3B L aser Product IEC-60825M 1993 Max. Outp ut: 30 mW Wavelength: 1.3
µ
m
7
Agere Systems Inc.
Preliminary Data Sheet
March 2001 A1611P DFB Laser Modules
Ordering Information
* For additional ordering inf ormation, please contact an
Agere Systems account manager at OPTO West, 1-800-362-3891
(for sales staff, please press option 2).
Ordering Code Definitions
Table 4. Ordering Information*
Device Code Comcode
A1611PAB04 108851601
A1611PAB06 108851619
A1611PAB08 108851627
A1611PAB10 108851635
A1611PAB13 108851643
A1611PAB16 108851650
A1611PAB20 108851668
A1611PAR04 108851676
A1611PAR06 108851684
A1611PAR08 108851692
A1611PAR10 108851700
Field Descr iption
Family Name
Analog 1310 nm, DFB, Laser
Distortion Performance
A = Standard Pe rformance
P = PAL 60 Tested
Frequency Pl an
C = 110 Channel
08 = 8 mW
10 = 10 m W
13 = 13 m W
16 = 16 m W
20 = 20 m W
Custom
00
A1611 P B R 04 YY
B = Enhanced Performance
L = Link Tested
A = 60 Channel
B = 80 Channel
04 = 4 mW
06 = 6 mW
01
02
03
04
05
06
Connector
R = FC/APC
B = SC/APC
N = None (No connector )
Optical Power
N = None (Wireless)
For additional information, contact your Microelectronics Group Account Manager or the following:
INTERNET: http://www.lucent.com/micro, or for Optoelectronics information, http://www.lucent.com/micro/opto
E-MAIL: docmaster@micro.lucent.com
N. AMERICA: Microelectronics Gro up, Lucent Technolo gies Inc., 555 Union Boulevard, Room 30L-1 5P -BA, Allentown, PA 18109-3286
1-800-372-2447, FAX 610-712-4106 (I n CANADA: 1-800-553-2448, FAX 610-712-4106)
ASIA PACIFIC: Microelectronics Group, Lucent Technologies Singapore Pte. Ltd., 77 Science Park Drive, #03-18 Cintech III, Singapore 118256
Tel. (65) 778 8833, FAX (65) 777 7495
CHINA: Microelectronics Group, Lucent Technologies (Shanghai) Co., Ltd., 33/F, Jin Mao Tower, 88 Century Boulevard Pudong, Shanghai 200 121
PRC Tel. (86) 21 5047 1212, FAX (86) 21 50 47 226 6
JAPAN: Microelectronics Group, Lucent Technologies Japan Ltd., 7-18, Higashi-Gotanda 2-chome, Shinagawa-ku, Tokyo 141, Japan
Tel. (81) 3 5421 1600, FAX (81) 3 5421 1700
EUROPE: Data Requests: MICROELECTRONICS GROUP DATALINE: Tel. (44) 7000 582 368, FAX (44) 1189 328 148
Technical Inquiries: OPTOELECTRONICS MARKETING: (44) 1344 865 900 (Ascot UK)
Lucent Technologies Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application.
Copyright © 2001 Lucent Technologies Inc.
All Rights Reserved
March 2001
DS00-291OPTO-2 (Replaces DS00-291OPTO-1)
Preliminary Data Sheet
A1611P DFB Laser Modules March 2001
