QorIQ Multicore Processor Development XAUI-Riser-B for QorIQ Communications Processors Overview The XAUI (10 gigabit attachment unit interface)-Riser-B Ethernet network card is designed to exercise the XAUI interface of QorIQ development systems supporting various communications processors, including P2041, P3041, P4040, P4080, P5010, P5020, P5021, P5040, T4160 and T4240. It also provides a total system solution to connect to the 10 GB network through the on-board Teranetics PHY through two modes: 10Base-T (UTP copper) or fiber optic. This solution provides two testing modes on a single board, saving the customer development cost of two separate boards to test either copper or fiber optic modes. XAUI-Riser-B XAUI-Riser-B Card Card Block Diagram 2.5 V 1.2 V 0.8 V 10GBase-T Port 1 Copper XFP/XFP+ Connector XFI Teranetics PHY TN8020 On Board Power Supply 12 V From PCIe 3.3 V Clock 156.26 MHz XAUI Midbus Probe Sideband Visibility PCI Express(R) EEPROM Key Features Technical Specifications By employing a Teranetics TN8020 PHY, Board size is 4.37" x 8.0" in current and next-generation NICs and solution featuring a single port for driving Onboard PHY Features and storage appliances: either the RJ45 connector or a fiber optic *Full IEEE(R) 802.3an standard compliance this network card provides a cost-effective (SFP+) connector. The board's mode is allows for use of powerful 10GBASE-T engineered to configure automatically when technology from the data center to the either the UTP copper Cat-6a/Cat-7 cable network's edge or the fiber optic module is plugged into the corresponding connector. As shown in the block diagram above, the fiber mode is through the XFI bus, where either the XFP or SFP+ module can be used. An onboard 156.25 MHz XAUI LVDS clock is provided. The board plugs into the Freescale-defined serial PCI Express(R) riser connector carrying the XAUI signals and an inline sideband connector carrying the reserved and MDIO signals for the XAUI interface. Supports up to 100 m on Cat-6a and Cat-7 cable types Supports up to 55 m on Cat-6 cable, already deployed in many data centers Demonstrated to work up to 45 nm * Flexible switch/MAC interface support switches for servers, enterprise networks 10G XFI-1 lane, 10.3125G 10G XAUI-4 lane, 3.125G 1G/100M SGMII-1 lane, 1.25G * Built-in diagnostics helps data center operators localize cabling problems, thus minimizing the link downtime * The XAUI-Riser-B is FCC compliant *The QorIQ development system that on Cat-5e, the most commonly XAUI-RISER-B plugs into must be installed UTP cable type running SDK 1.3.2 or later * T riple-speed operation enables compatibility with a previously installed base and allows an upgrade path to increased bandwidth *Multi-rate support (100M/1G/10GBase-T) decouples the simultaneous upgrade of both ends of a link, which provides flexibility in existing installations and accelerates the XAUI-Riser-B Contents and Ordering Information Part number: XAUI-RISER-B * Includes Cat-6a cable * SFP+ module included Suggested resale price: $1,300 (USD) adoption of new equipment XAUI-Riser-B Board For more information, visit freescale.com/QorIQ Freescale, the Freescale logo and QorIQ are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners. (c) 2010, 2012, 2013 Freescale Semiconductor, Inc. Document Number: XAUIRISERFS REV 6 Agile Number: 926-27691 REV C