DRC3P48A411R2 - Crydom - Product.Network

DRC Series

• 7.6 Amp AC Semiconductor Motor Controller

• Load voltage range up to 600VAC

• Fits standard 35mm DIN Rail

• LED input status indicator

• AC or DC control

• Zero Voltage (resistive loads) or instantaneous (inductive loads) turn-on output

•

C-UL-US Listed, CCC Certified, IEC Rated, CE & RoHS Compliant, Horsepower Rated

• Built-in Overvoltage Protection

• Ultra-efficient thermal management design (Patented)

Start / Stop Reversing

Solicon DRC3 Series are Solid State Contactors intended for

frequently switching on and off three phase loads up to 5 HP, 600

VAC 7.6 Amps. They are available in both contactor versions

DRC3P and reversing contactor versions DRC3R.

The Solicon Contactor DRC3P is available in either instantaneous

turn-on (for Motor Control) or zero voltage turn-on (for Resistive

Loads). It is available in either 2 or 3 controlled leg versions. The

2 legs control version is particularly suitable for motor control

circuits where the neutral conductor is not utilized.

The Solicon Reversing Contactor DRC3R includes an interlock

control that allows only off, forward and reverse operation in a

safe mode while providing high space saving; it switches

instantaneously upon application of the control voltage unless an

instantaneous change of direction is commanded, then it will

delay the direction change by 100msec in order to prevent

simultaneous forward and reverse operations.

All the models of Solicon DRC3 Series combine the benefits and

advantages of a solid state contactor with the functionality and

simplicity of use of an electromechanical contactor thanks to the

proprietary thermal management technology (Patented) and

complete electrical insulation (no grounding required); the

embedded auxiliary contacts, normally open and/or normally

closed, are intended to be used at 18-280VAC. Five different

control voltages are available in order to cover most applications.

All models include overvoltage protection.

PRODUCT SELECTION

Control Voltage Without Auxiliary Contact 1 NO+NC Auxiliary Conctat 2 NO Auxiliary Contact

230 VAC DRC3P48A400, DRC3R48A400 DRC3P48A411

120 VAC DRC3P48B400, DRC3R48B400 DRC3P48B411

48 VAC/DC DRC3P48C400, DRC3R48C400 DRC3P48C411

DRC3P48A420, DRC3R48A420

DRC3P48B420, DRC3R48B420

DRC3P48C420, DRC3R48C420

AVAILABLE OPTIONS

Required for valid part number

For options only and not required for valid part number

DRC

Series

Operating Voltage

40: 400 VAC

(3R function only)

48: 480 VAC

60: 600 VAC

(3P function only)

Control Voltage

A: 208-265 VAC

B: 90-140 VAC

C: 36-55 VAC/DC

D: 18-30 VAC/DC

(3P function only)

18-30 VAC

(3R function only)

E: 18-30 VDC

(3R function only)

Function

3P: Contactor

3R: Reversing Contactor

48 D3P

Load Current per Phase

4: 7.6 Amp FLA

(x2 Controlled Legs

& 3R function);

4.8 Amp FLA

(x3 Controlled Legs only)

Auxiliary Contacts,

N.O. - N.C.

00: Not included

11: 1 Solid State Auxiliary

Contact, Normally Open;

1 Solid State Auxiliary

Contact, Normally Closed

(3P function only)

20: 2 Solid State Auxiliary

Contacts, Normally Open

Switching Mode

(3P function only)

Blank: Zero Voltage Turn-On

R: Instantaneous Turn-On

Controlled Legs

(3P function only)

Blank: 3 Controlled Legs

2: 2 Controlled Legs

24 VAC/DC, 24 VAC DRC3P48D400, DRC3R48D400 DRC3P48D411 DRC3P48D420, DRC3R48D420

24 VDC DRC3R48E400 DRC3R48E420

Do not forget to visit us at: www.crydom.com

'DWDVKHHW

DIN Rail Mount

SOLID STATE AUXILIARY CONTACTS(1)

Description

Operating Voltage Range (47-63Hz) [Vrms] (9)

Transient Overvoltage [Vpk]

Maximum Load Current [Arms]

Minimum Load Current [mA]

Maximum Surge Current [Apk] 1 Cycle 60Hz

Maximum Surge Current [Apk] 1 Cycle 50Hz

Maximum I2t for Fusing (8.33msec)[A2sec]

Normally Open Sufﬁx 2x,1x

18-280

600

6.7

Normally Closed Sufﬁx x1

18-280

600

6.7

Maximum I2t for Fusing (10msec)[A2sec]

Maximum Off-State Leakage Current @ Rated Voltage [mArms]

Minimum Off-State dv/dt @ Maximum Rated Voltage [V/μsec]

Maximum Delay to Turn-On [msec] (6)

Maximum Turn-Off Time [msec] (7)

7.2

0.1

500

7.2

5 mA

500

OUTPUT SPECIFICATIONS (1)

DRC3P48x4x2DRC3P48x4xDescription

Load Current, General Use UL508 /AC51 @40°C [Arms] (3) 5 7.6

Load Current, Motor Controller UL508 /AC-53a @480VAC [Arms] (3) 4.8 7.6

Minimum Load Current [Arms] 0.15 0.15

Maximum Surge Current [Apk] 1 Cycle 60Hz 750 750

Maximum Surge Current [Apk] 1 Cycle 50Hz 716 716

Maximum I2t for Fusing (8.33msec)[A2sec] 2330 2330

Maximum I2t for Fusing (10msec)[A2sec] 2560 2560

Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.35 per channel 1.35 per channel

Minimum Power Factor (with Maximum Load) 0.5 0.5

Ratings according to UL 508/IEC60947-4-2 [HP/kW]: 240 VAC 1/.75 2/1.5

Ratings according to UL 508/IEC60947-4-2 [HP/kW]: 400 VAC 2/1.5 3/2.2

Ratings according to UL 508/IEC60947-4-2 [HP/kW]: 480 VAC 3/2.2 5/3.7

Operating Voltage (47-63Hz) [Vrms] 48-530 48-530

Transient Overvoltage [Vpk] (2) 1200 1200

Maximum Off-State Leakage Current @ Rated Voltage [mArms] 3.0 3.0

Maximum Off-State dv/dt @ Maximum Rated Voltage [V/μsec] 500 500

DRC3P60x4x2DRC3P60x4x

5 7.6

4.8 7.6

0.15 0.15

750 750

716 716

2330 2330

2560 2560

1.35 per channel 1.35 per channel

0.7 0.7

1/.75 2/1.5

2/1.5 3/2.2

3/2.2 5/3.7

48-600 48-600

1200 1200

1.0 1.0

500 500

DRC3R48x4xDRC3R40x4x

7.6 7.6

0.15 0.15

750 625

716 597

2330 1621

2560 1779

1.5 per channel 1.5 per channel

0.5 0.5

2/1.5 2/1.5

3/2.2 3/2.2

- 5/3.7

Motor Ratings @ 600 VAC [HP/kW] - - 3/2.2 5/3.7 - -

48-415 48-510

1200 1600

5.5 5.5

500 500

GENERAL SPECIFICATIONS (1)

Description Parameters

Dielectric Strength, Input/Output/Base (50/60Hz) (10) 3750 Vrms

Minimum Insulation Resistance (@ 500 VDC) 109 Ohms

Maximum Capacitance, Input/Output 20 pF

Ambient Operating Temperature Range (11) -30 to 80 °C

Ambient Storage Temperature Range -40 to 100 °C

Weight (typical) 2 Controlled Legs (6.9 oz [197 g]) / 3 Controlled Legs (8.0 oz [228 g])

Housing Material UL94 V-0

Housing Color Black and Light Gray

LED Status Indicator (color) (12) Forward (Green) / Reverse (Amber)

Short Circuit Current Rating (13) 100kA

Control and Auxiliary Contact Terminal Screw Torque Range (in-lb/Nm) 12 / 1.36

Load Terminal Screw Torque Range (in-lb/Nm) 15 / 1.7

Input Terminal Wire Capacity 18-12 AWG (IEC 1-4 mm2) (stranded /solid)

Output Terminal Wire Capacity 18-10 AWG (IEC 1-6 mm2 ) (stranded /solid)

Humidity 85% non-condensing

Protection Degree (15) IP20

Pollution Degree 2

MTBF (Mean Time Between Failures) at 60°C ambient temperature (14) 390,000 hours (44 years)

MTBF (Mean Time Between Failures) at 40°C ambient temperature (14) 1,398,000 hours (159 years)

INPUT SPECIFICATIONS (1)

Description Option B

Control Voltage Range (4) 90-140 VAC

Minimum Turn-On Voltage (5) 90 VAC

Must Turn-Off Voltage 10 VAC

Minimum Input Current (for on-state) [mA] 7.5

Maximum Input Current [mA] 13

Nominal Input Impedance [Ohms] 12.5k

Maximum Delay to Turn-On [msec] (6)(7) 30

Option A

208-265 VAC

208 VAC

40 VAC

6.1

33k

Option C

36-55 VAC / VDC

36 VAC / VDC

4 VAC / VDC

Maximum Turn-Off Time [msec] (8) 4040 40

Option D

18-30 VAC / VDC

18 VAC / VDC

4 VAC / VDC

12.5

0.93k

Option E

18-30 VDC

18 VDC

4 VDC

12.5

0.93k

100

Do not forget to visit us at: www.crydom.com

'DWDVKHHW

DIN Rail Mount

MECHANICAL SPECIFICATIONS (1)

Tolerances: ±0.02 in / 0.5 mm

All dimensions are in: inches [millimeters]

(17)

100 203040506070 80

Ambient Temperature (ºC)

Load Current (Amps)

THERMAL DERATE INFORMATION

DRC3P (3 controlled legs)

Single unit Multiple units

(17)

Ambient Temperature (ºC)

Load Current (Amps)

DRC3P (2 controlled legs)

& DRC3R

Single unit Multiple units

02010 30 40 50 60 70 80

Top/Bottom view (Fig. 1)

Fig. 1

TERMINAL SCREW TYPE

INPUT

STATUS

XXXX

IND. CONT. EQ.

DRC3

1.23

[31.3]

2.29

[58.3]

2.58

[65.5]

1.68

[42.7]

3.41

[86.7]

1.78

[45.3]

3.76

[95.6]

3.51

[89]

2.91

[73.9]

0.23

[5.8]

A3 2313

2414

(16)

Do not forget to visit us at: www.crydom.com

'DWDVKHHW

DIN Rail Mount

SWITCHING FREQUENCY/LOAD CHARACTERISTIC FOR ALL DEVICES

IL : Load Operating Current

IR : Rated Full Load Current [FLA]

ID : Direct-On-Line Inrush Current

tL : Load Operating Current Time

tD : Direct-On-Line Inrush Current Time

tC : Cycle Time

tOn : On Time

tOff : Off Time

Without overload relay (limit given by the contactor itself)

With overload relay (limit given by the overload relay itself)

tD (sec) 0.1 1 10 100

0.05 5000 2700 350 35

0.1 3200 1950 350 35

0.2 950 320 35

0.4 500 280 35

0.8 290 160 35

1.6 110 30

3.2 75 25

tOn (sec)

tD (sec) 0.1 1 10 100

0.05 6000 3550 350 35

0.1 4100 3000 350 35

0.2 1300 350 35

0.4 700 320 35

0.8 400 320 35

1.6 125 35

3.2 90 35

tOn (sec)

tD (sec) 0.1 1 10 100

0.05 7450 3200 350 35

0.1 4050 2100 350 35

0.2 1200 350 35

0.4 650 320 35

0.8 350 280 35

1.6 180 35

3.2 90 35

tOn (sec)

tD (sec) 0.1 1 10 100

0.05 9000 3550 350 35

0.1 5400 3550 350 35

0.2 1700 350 35

0.4 850 350 35

0.8 560 350 35

1.6 240 35

3.2 180 35

tOn (sec)

tD (sec) 0.1 1 10 100

0.05 2200 1650 330 30

0.1 1500 1000 280 28

0.2 550 255 26

0.4 250 150 24

0.8 80 60 20

1.6 40 16

3.2

tOn (sec)

tD (sec) 0.1 1 10 100

0.05 2800 1800 320 35

0.1 1700 1300 310 32

0.2 650 290 30

0.4 300 200 26

0.8 200 90 25

1.6 65 25

3.2

tOn (sec)

tD (sec) 0.1 1 10 100

0.05 5150 2800 260 35

0.1 2850 1920 250 34

0.2 1100 250 33

0.4 600 200 32

0.8 320 200 30

1.6 120 25

3.2 75 20

tOn (sec)

tD (sec) 0.1 1 10 100

0.05 5600 3200 350 35

0.1 3200 2700 350 35

0.2 1400 350 35

0.4 700 350 35

0.8 350 280 35

1.6 170 35

3.2 80 25

tOn (sec)

Table 1

• High inrush current (ID/IR = 4 to 7.2)

• Full load (IL/IR= 1)

Table 2

• High inrush current (ID/IR = 4 to 7.2)

• 60% load (IL/IR= 0.6)

Table 3

• Low inrush current (ID/IR < 4 )

• Full load (IL/IR= 1)

Table 4

• Low inrush current (ID/IR < 4 )

• 60% load (IL/IR= 0.6)

Table 5

• High inrush current (ID/IR = 4 to 7.2)

• Full load (IL/IR= 1)

Table 6

• High inrush current (ID/IR = 4 to 7.2)

• 60% load (IL/IR= 0.6)

Table 7

• Low inrush current (ID/IR < 4 )

• Full load (IL/IR= 1)

Table 8

• Low inrush current (ID/IR < 4 )

• 60% load (IL/IR= 0.6)

tDtL

tOn tOff

MAXIMUM ALLOWABLE NUMBER OF STARTS PER HOUR DEPENDING ON THE STARTING

TIME tD AND THE ON PERIOD tOn (as for standard IEC 60947-4-2) FOR ALL DEVICES

---

Do not forget to visit us at: www.crydom.com

'DWDVKHHW

DIN Rail Mount

SHORT CIRCUIT AND OVERLOAD PROTECTION FOR ALL DEVICES

IEC standard 60947-4-1 make a distinction between two different types of protection, (called “coordination”), which are designated types “1” and "2".

Any short-circuit that occurs is cleared safely by either type of coordination.

The only difference between the 2 categories concerns the extent of the SSR damage caused by the short-circuit.

Type "1" coordination requires that in the event of a short-circuit, the Solid State Contactor does not endanger personnel or installations,

but permanent damage to the SSC is permissible. In this case the SSC may need to be replaced. For this type of co-ordination,

the use of fusing or circuit breakers adequate to protect the system and wiring from short circuits, (but not specifically considering SSC protection), can be used.

Type "2" coordination requires that under a short-circuit condition, the circuit is interrupted, the SSC does not endanger persons or installations,

and in addition the SSR will be able to operate after the fault condition is repaired.

Type of coordination 1

Note: All the Schneider Electric Thermal magnetic circuit breakers GV2 family (GV2ME and GV2P) is fully mechanical compatible with the DRC contactor using the GV2AF3 connection block.

Protection by overload relays and fuses

Nominal Motor

Current

Overload Relay

(Schneider Electric)

Class gG fuses

(example from Littlefuse)

Solid State Contactor

2 controlled legs

Solid State Contactor

3 controlled legs

Solid State Contactor

Reversing

0.40-0.63 A LRD04 CY14X51G16 DRC3Pxx4x2 DRC3Pxx4x DRC3Rxx4x

0.63-1 A LRD05 CY14X51G16 DRC3Pxx4x2 DRC3Pxx4x DRC3Rxx4x

1-1.6 A LRD06 CY14X51G25 DRC3Pxx4x2 DRC3Pxx4x DRC3Rxx4x

1.6-2.5 A LRD07 CY14X51G25 DRC3Pxx4x2 DRC3Pxx4x DRC3Rxx4x

2.5-4 A LRD08 CY14X51G25 DRC3Pxx4x2 DRC3Pxx4x DRC3Rxx4x

4-6.3 A LRD10 CY14X51G40 DRC3Pxx4x2 DRC3Pxx4x(up to 4.8A) DRC3Rxx4x

6.3-10 A LRD14 CY14X51G40 DRC3Pxx4x2 (up to 7.6A) - DRC3Rxx4x (up to 7.6A)

(18)

Type of coordination 2

Protection by overload relays and fuses

Nominal Motor

Current

Overload Relay

(Schneider Electric)

Semiconductor fuses with less than 1621A2S

Littlefuse

Solid State Contactor

2 controlled legs

Solid State Contactor

3 controlled legs

Solid State Contactor

Reversing

0.40-0.63 A LRD04 LA50QS40-4 DRC3Pxx4x2 DRC3Pxx4x DRC3Rxx4x

0.63-1 A LRD05 LA50QS40-4 DRC3Pxx4x2 DRC3Pxx4x DRC3Rxx4x

1-1.6 A LRD06 LA50QS40-4 DRC3Pxx4x2 DRC3Pxx4x DRC3Rxx4x

1.6-2.5 A LRD07 LA50QS40-4 DRC3Pxx4x2 DRC3Pxx4x DRC3Rxx4x

2.5-4 A LRD08 LA50QS40-4 DRC3Pxx4x2 DRC3Pxx4x DRC3Rxx4x

4-6.3 A LRD10 LA50QS40-4 DRC3Pxx4x2 DRC3Pxx4x (up to 4.8A) DRC3Rxx4x

6.3-10 A LRD14 LA50QS40-4 DRC3Pxx4x2 (up to 7.6A) - DRC3Rxx4x (up to 7.6A)

(18)

All the Schneider Electric Overload relay LRD family is fully mechanical compatible with the DRC contactor without the need of any adapter.

0.40-0.63 A GV2ME04 / GV2P04 DRC3Pxx4x2 DRC3Pxx4x DRC3Rxx4x

0.63-1 A GV2ME05 / GV2P05 DRC3Pxx4x2 DRC3Pxx4x DRC3Rxx4x

1-1.6 A GV2ME06 / GV2P06 DRC3Pxx4x2 DRC3Pxx4x DRC3Rxx4x

1.6-2.5 A GV2ME07 / GV2P07 DRC3Pxx4x2 DRC3Pxx4x DRC3Rxx4x

2.5-4 A GV2ME08 / GV2P08 DRC3Pxx4x2 DRC3Pxx4x DRC3Rxx4x

4-6.3 A GV2ME10 / GV2P10 DRC3Pxx4x2 DRC3Pxx4x (up to 4.8A) DRC3Rxx4x

6.3-10 A GV2ME14 / GV2P14 DRC3Pxx4x2 (up to 7.6A) - DRC3Rxx4x (up to 7.6A)

Nominal Motor

Current

Thermal Magnetic Circuit Breaker

(Schneider Electric)

Solid State Contactor

2 controlled legs

Solid State Contactor

3 controlled legs

Solid State Contactor

Reversing

Protection by Thermal Magnetic Circuit Breaker (18)

(Conforming to the IEC60947-4-2 and UL508)

The DRC Series can accept the LAD7C1 module (pre-wiring kit allowing direct connection of the NC contact of relay LRD to the contactor)

50.058.06.40

A093909

SIBA (Cylindric) Ferraz (Cylindric)

Do not forget to visit us at: www.crydom.com

'DWDVKHHW

DIN Rail Mount

WIRING AND BLOCK DIAGRAM

DRC3P CONTACTOR

INPUT

STATUS

L1 L2 L3

T1 T2 T3

XXXX

IND. CONT. EQ.

DRC3PXXX400XX

INPUT

STATUS

13 21 A1

14 22 A2

L1 L2 L3

T1 T2 T3

XXXX

IND. CONT. EQ.

DRC3PXXX411XX

INPUT

STATUS

13 23 A1

14 24 A2

L1 L2 L3

T1 T2 T3

XXXX

IND. CONT. EQ.

DRC3PXXX420XX

DRC3Pxx400 DRC3Pxx411 DRC3Pxx420

48-530 VAC, 50-60 Hz

48-600 VAC, 50-60 Hz

CONTROL

INPUT

/ > / > / >

CONTROL

INPUT

/ > / > / >

1st Auxiliary Contact (18 - 280 VAC) Normally Open

2nd Auxiliary Contact (18 - 280 VAC) Normally Closed

CONTROL

INPUT

/ > / > / >

1st Auxiliary Contact (18 - 280 VAC) Normally Open

2nd Auxiliary Contact (18 - 280 VAC) Normally Open

Short circuit and overload

current protection (see page 5)

T1 T2 T3

General Use /

AC-51 Application

T1 T2 T3 T1 T2 T3 T1 T2 T3

T1 T2 T3

Motor Controller /

AC-53a Application

DRC3P

(3 controlled legs model)

Main Circuit

DRC3Pxx420

(2 Normally Open)

Auxiliary Contacts

DRC3Pxx400

Without Auxiliary Contacts

DRC3P

(2 controlled legs model)

Main Circuit

DRC3Pxx411

(1 Normally Open - 1 Normally Closed)

Auxiliary Contacts

(19)

Do not forget to visit us at: www.crydom.com

'DWDVKHHW

DIN Rail Mount

DRC3R REVERSING CONTACTOR

(20)

DRC3R

Forward

Reverse

DRC3Rxx420

models only

INPUT

STATUS

L1 L2 L3

T1 T2 T3

XXXX

IND. CONT. EQ.

DRC3RXXX400XX

INPUT

STATUS

13 23 A1

14 24 A2

L1 L2 L3

T1 T2 T3

XXXX

IND. CONT. EQ.

DRC3RXXX420XX

DRC3Rxx400 DRC3Rxx420

48-415 VAC, 50 - 60 Hz

48-510 VAC, 50 - 60 Hz

CONTROL

INPUT

(Forward)

CONTROL

INPUT

(Common)

CONTROL

INPUT

(Reverse)

CONTROL

INPUT

(Reverse)

/ > / > / > / > / > / >

1st Auxiliary Contact (18 - 280 VAC) Normally Open

2nd Auxiliary Contact (18 - 280 VAC) Normally Open

Short circuit and overload current

protection (see page 5)

T1 T2 T3T1 T2 T3

T1 T2 T3

Motor Controller /

AC-53a Application

Overload current

protection needs to

be considered

CONTROL

INPUT

(Forward)

CONTROL

INPUT

(Common)

A3 A3

Reverse

Forward

Do not forget to visit us at: www.crydom.com

'DWDVKHHW

DIN Rail Mount

AGENCY APPROVALS

Certiﬁcation in accordance with:

United States Standard for Industrial Control Equipment - UL 508 and

Canadian Standard Association for Industrial Control Equipment – C22.2 No. 14.

China Compulsory Certiﬁcation for AC Semiconductor Motor Controller-GB14048.6-2008

DRC3 series conforms to the harmonized EN standard EN/IEC 60947-4-2

Electromagnetic Compatibility:

IEC 61000-4-2 : Electrostatic Discharge – Level 3

IEC 61000-4-4 : Electrically Fast Transients – Level 3

IEC 61000-4-5 : Electrical Surges – Level 3

Vibration Resistance:

IEC 60068-2-6 : Amplitude Range 10-55 Hz, Displacement 0.75mm

Shock Resistance:

IEC 60068-2-27 : Peak Acceleration 15g, Duration11msec.

E116949 (Only DRCx40x4x & DRCx48x4x)

FWD REV

Open

Input A1 Input A3

Open

Off

TIMING DIAGRAM

1, 4, 10

3, 9

STEP DESCRIPTION

A1 is activated, FWD Output waits for 100msec

FWD direction is activated

A1 changes to off. FWD Output is disabled at the same time

A3 is activated. REV Outputs waits for 100msec

6 REV direction is On

8 A3 is open, A1 is closed, activation delayed 100msec

7 Interlock fuction is activated. REV is disabled due to A1 & A3 both being active

Initial Condition. A1 & A3 open

Input/Output 1 2 3 4 5 6 7 8 9 10

Input A1

Input A3

FWD Direction 100 msec 100 msec

REV Direction 100 msec

TIMING DIAGRAM FOR DRC3R

interlock

Do not forget to visit us at: www.crydom.com

'DWDVKHHW

DIN Rail Mount

ACCESSORIES FOR ALL DEVICES

Recommended Accessories

Motor Nominal

Current

Thermal Magnetic Circuit

Breaker (Push Button)

Thermal Magnetic Circuit

Breaker (Selector)

0.40 - 0.63 A

0.63 - 1 A

1 - 1.6 A

1.6 - 2.5 A

2.5 - 4 A

4 - 6.3 A

6.3 - 10 A

Fully compatible with

Schneider Electric

thermal overload

relays &

thermal magnetic

circuit breakers

LRD04

LRD05

LRD06

LRD07

LRD08

LRD10

LRD14

GV2ME04

GV2ME05

GV2ME06

GV2ME07

GV2ME08

GV2ME10

GV2ME14

GV2P04

GV2P05

GV2P06

GV2P07

GV2P08

GV2P10

GV2P14

LR97 D015xx

LR97 D07xx

LR97 D25xx

Bimetal

Overload Relay

Electronic

Overload Relay

ID Marker Strips

CNLB, CNLN, CNL2

Packages of 10 plastic strips comprising 10

individual markers which can be placed for easy

identification during the use of multiple units.

Blank Strips

Part no.: CNLB

Numbered 1 to 10 Strips

Part no.: CNLN Numbered 11 to 20 Strips

Part no.: CNL2

Note: All the Schneider Electric Thermal magnetic circuit breakers GV2 family (GV2ME and GV2P) is fully mechanical compatible with the DRC contactor using the GV2AF3 connection block.

All the Schneider Electric Overload relay LRD family is fully mechanical compatible with the DRC contactor without the need of any adapter.

The DRC Series can accept the LAD7C1 module (pre-wiring kit allowing direct connection of the NC contact of relay LRD to the contactor)

When the LAD7C1 module is used, the common terminal for the control input is not anymore the ”A2” terminal of DRC but it is the “96” terminal of the overload relay.

Nbd110Si

Do not forget to visit us at: www.crydom.com

'DWDVKHHW

DIN Rail Mount

GENERAL NOTES

(1) All parameters at 25°C unless otherwise speciﬁed.

(2) For DRC3P relay will self trigger between 900-1200V, Not suitable for capacitive loads.

(3) Mounted in the Vertical position.

(4) On DRC3R models the range for option D is 18-30 VAC.

(5) For low temperature operation consider nominal control voltage.

(6) For DRC3R the turn-on time is 100msec ± 30msec.

(7) For DRC3P Instantaneous Turn-on, Option D, turn-on time is 4 msec.

(8) When is complete removed the control signal. For DRC3R the turn-off time is 20msec.

(9) Operating voltage range 18-30 VDC is also valid when used to latch the DRC contactor control input.

(10) For input to auxiliary output the dielectric strength is 2.5kV.

(11) UL approval up to 40°C surrounding temperature.

(12) Reverse Amber Indicator is for DRC3R models only.

(13) 100kA, 480VAC, when protected with CC class fuses rated 600VAC, 20A or equivalent.

(14) All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report).

(15) IP20 rating is not associated with the UL approval.

(16) Derate information is valid when DCR contactors are used with or without accessories, installed on top and/or bottom.

(17) Minimum spacing to obtain max. current is 22mm between adjacent units.

(18) Combinations of these Protective Devices and Solid State Contactor have not been evaluated by UL.

(19) For DRC3P models external loads can be connected in parallel to the control input.

(20) DRC3R internal safety interlock circuit prevents the product to work if any leakage current is present in the control input currently not enabled.

Rev. 020916

Do not forget to visit us at: www.crydom.com

'DWDVKHHW

DIN Rail Mount

WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告

RISK OF MATERIAL DAMAGE AND HOT

ENCLOSURE

• The product's side panels may be hot, allow

the product to cool before touching.

• Follow proper mounting instructions including

torque values.

• Do not allow liquids or foreign objects to enter

this product.

Failure to follow these instructions can result in

serious injury, or equipment damage.

RISQUE DE DOMMAGE MATERIEL ET DE

SURCHAUFFE DU BOITIER

• Les panneaux latéraux du produit peuvent être

chauds. Laisser le produit refroidir avant de le

toucher.

• Respecter les consignes de montage, et

notamment les couples de serrage.

• Ne pas laisser pénétrer de liquide ni de corps

étrangers à l'intérieur du produit.

Le non-respect de cette directive peut entraîner,

des lésions corporelles graves ou des

dommages matériels.

Die Nichtbeachtung dieser Anweisung kann

Körperverletzung oder Materialschäden

zur Folge haben.

GEFAHR VON MATERIALSCHÄDEN UND

GEHÄUSEERHITZUNG

• Die Seitenwände können heiß sein. Lassen Sie

das Produkt abkühlen, bevor Sie es berühren.

• Beachten Sie die Montageanweisungen,

• Führen Sie keine Flüssigkeiten oder

Fremdkörper in das Produkt ein.

Si no se respetan estas precauciones pueden

producirse graves lesiones, daños materiales.

RIESGO DE DAÑOS MATERIALES Y DE

SOBRECALENTAMIENTO DE LA UNIDAD

• Los paneles laterales del producto pueden

estar calientes. Esperar que el producto se

enfríe antes de tocarlo.

• Respetar las instrucciones de montaje, y en

particular los pares de apretado.

• No dejar que penetren líquidos o cuerpos

extraños en el producto.

La mancata osservanza di questa precauzione può

causare gravi rischi per l'incolumità personale o

danni alle apparecchiature.

RISCHIO DI DANNI MATERIALI E D'INVOLUCRO

CALDO

• I pannelli laterali dell'apparecchio possono

scottare; lasciar quindi raffreddare il prodotto

prima di toccarlo.

• Seguire le istruzioni di montaggio corrette.

• Non far entrare liquidi o oggetti estranei in questo

apparecchio.

සփీኟඓኴႜኄၵ֡ፕຫ௽ǈ

ᆶీሰׯჹዘට༹ฅ࡞ኁยԢڦ໦࣋ă

֌ଙ໦࣋ࢅߛ࿒ྔڦླ၃Ⴀ

•!ׂ೗ڦᅃ֨௬ӱీ࢔ඤǈሞഄૐඐമ൩

!փᄲةಸă

•!ፏቷኟඓڦҾጎຫ௽ǈԈઔ౦ኵă

•!൩ကඟᅂ༹ഄ໱ᅴ࿿৊෇Ԩׂ೗ă

DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / ླ၃

HAZARD OF

ELECTRIC

SHOCK,

EXPLOSION,

OR ARC FLASH.

xDisconnect all

power before

installing or

working with

this equipment.

xVerify all

connections

and replace all

covers before

turning on

power.

Failure to follow

these

instructions will

result in death

or serious injury.

RIESGO DE

DESCARGA

ELECTRICA O

EXPLOSION.

xDesconectar

todos los

suministros de

energia a este

equipo antes

de trabajar

con este equipo.

xVerificar todas

las conexiones

y colocar todas

las tapas antes

de energizer

el equipo.

incumplimiento

de estas

instrucciones

puede provocar

la muerte o

lesiones serias.

RISQUE DE

DESCHARGE

ELECTRIQUE

OU EXPLOSION

xEteindre

toutes les

sources

d'énergie de

cet appareil

avant de

travailler

dessus de cet

appareil

xVérifier tous

connections, et

remettre tous

couverts en

olace avant de

mettre sous

De non-suivi de

ces instructions

provoquera la

mort ou des

lésions sérieuses

sérieuses.

GEF AHR EINES

ELEKTRISCHE

N SCHLAGES

ODER EINER

EXPLOSION.

xStellen Sie

jeglichen

Strom ab, der

dieses Gerät

versorgt, bevor

Sie an dem

Gerät Arbeiten

durchführen

xVor dem

Drehen auf

Energie alle

Anschlüsse

überprüfen

und alle

Abdeckungen

ersetzen.

Unterlassung

dieser

Anweisungen

können zum

Tode oder zu

schweren

Verletzungen

führen.

RISCHIO DI

SCOSSA

ELETTRICA O

DELL’ESPLOSIONE.

xSpenga tutta

l'alimentazione

che fornisce

questa

apparecchiatura

prima di lavorare

a questa

apparecchiatura

xVerificare tutti

i collegamenti

e sostituire

tutte le coperture

prima

dell’accensione

L'omissione di

queste istruzioni

provocherà la

morte o

lesioni serie

٪ሞۉĂ

Ԗቊۉࢷ

෻ຮླ၃

ሞ֡ፕُย

Ԣኮമ൩ံ

࠲Կۉᇸă

ැփፏ๰ኄၵຫ௽ǈ

ీࣷڞዂჹዘڦ

ටวฅ࡞ฯ዁ຶྨă

Do not forget to visit us at: www.crydom.com

'DWDVKHHW

DIN Rail Mount

ANNEX - ENVIROMENTAL INFORMATION

The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China

Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.

Part

Name

Toxic or hazardous Substance and Elements

Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated

(Pb) (Hg) (Cd) Chromium

(Cr (VI))

biphenyls

(PBB)

diphenyl ethers

(PBDE)

Semiconductor die

Solder

䱴Ԧ⧟؍ؑ᚟

此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006,

电子信息产品污染控制标识要求。

ᴹ∂ᴹᇣ⢙䍘ᡆݳ㍐Ԧ䜘

〠䫵 ⊎ 䭹 ޝԧ䬜 ཊⓤ㚄㤟 ཊⓤҼ㤟䟊

(Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE)

ሬփ㣟⡷

✺᧕⛩

Do not forget to visit us at: www.crydom.com

'DWDVKHHW

DIN Rail Mount

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Crydom:

DRC3R40D400 DRC3P48B400R2 DRC3R48A420 DRC3P48B400R DRC3R40B400 DRC3R40A400

DRC3P48A400R2 DRC3P48A400R DRC3P48D411R2 DRC3P48D400R2 DRC3P48D420R2 DRC3R48D420

DRC3P48D400R DRC3R48B420 DRC3P48D420 DRC3P48D4202 DRC3P48D420R DRC3R40A420

DRC3R40B420 DRC3R40D420 DRC3R48A400 DRC3R48B400 DRC3R48D400 DRC3P48A400 DRC3P48A4002

DRC3P48A411 DRC3P48A4112 DRC3P48A411R DRC3P48A411R2 DRC3P48A420 DRC3P48A4202

DRC3P48A420R DRC3P48A420R2 DRC3P48B400 DRC3P48B4002 DRC3P48B411 DRC3P48B4112

DRC3P48B411R DRC3P48B411R2 DRC3P48B420 DRC3P48B4202 DRC3P48B420R DRC3P48B420R2

DRC3P48D400 DRC3P48D4002 DRC3P48D411 DRC3P48D4112 DRC3P48D411R