HMC485MS8GETR - ANALOG DEVICES

MIXERS - HIGH IP3 - SMT

9 - 292

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

HMC485MS8G / 485MS8GE

HIGH IP3 GaAs MMIC MIXER with

INTEGRATED LO AMPLIFIER, 1.7 - 2.4 GHz

v03.0507

General Description

Features

Functional Diagram

+34 dBm Input IP3

Conversion Loss: 9 dB

Low LO Drive: -2 to +4 dBm

Single Positive Supply: 5V @ 45 mA

Ultra Small MSOP Package: 14.8mm2

Included in the HMC-DK003 Designer’s Kit

Electrical Speci cations, TA = +25°C, LO = 0 dBm, IF = 200 MHz*, Vdd= 5V

Typical Applications

High Dynamic Range Infrastructure:

• GSM, GPRS & EDGE

• CDMA & W-CDMA

• Cable Modem Termination Systems

The HMC485MS8G & HMC485MS8GE are high dy-

namic range passive MMIC mixers with integrated

LO ampli er in plastic surface mount 8 lead Mini

Small Outline Packages (MSOP) covering 1.7 to 2.4

GHz. Excellent input IP3 performance of +34 dBm

for down conversion and +27 dBm for up conver-

sion is provided for 2.5G & 3G GSM/CDMA based

UMTS or PCS applications at an LO drive of 0 dBm.

With an input 1 dB compression of +19 dBm, the

RF port will accept a wide range of input signal lev-

els. Conversion loss is 9.2 dB typical. The 50 to 300

MHz IF frequency response will satisfy many UMTS/

PCS transmit or receive frequency plans con gured

for low side LO. The HMC485MS8G(E) input IP3

performance coupled with its high P1dB rivals tradi-

tional active FET mixers while offering a much smaller

14.8mm2 standard IC footprint.

Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max Units

Frequency Range, RF 1.7 - 1.8 1.8 - 2.0 2.0 - 2.2 2.2 - 2.4 GHz

Frequency Range, LO 1.4 - 1.75 1.5 - 1.95 1.7 - 2.15 1.9 - 2.35 GHz

Frequency Range, IF 50 - 300 50 - 300 50 - 300 50 - 300 MHz

Conversion Loss 9.8 11 9.2 10.5 9 10 9.5 10.5 dB

Noise Figure (SSB) 9.8 9.2 9 9.5 dB

LO to RF Isolation 12 8 5 5 dB

LO to IF Isolation 7 10 13 12 dB

IP3 (Input) 27 31 29 34 29 33 29 32 dBm

1 dB Gain Compression (Input) 16 19 17 20 17 21 18.5 21.5 dBm

LO Input Drive Level (Typical) -2 to +4 -2 to +4 -2 to +4 -2 to +4 dBm

Supply Current 45 45 45 45 mA

*Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 200 MHz.

OBSOLETE

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

MIXERS - HIGH IP3 - SMT

9 - 293

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

Conversion Gain vs.

Temperature @ LO = 0 dBm Isolation @ LO = 0 dBm

Conversion Gain vs. LO Drive Return Loss @ LO = 0 dBm

IF Bandwidth @ LO = 0 dBm

Upconverter Performance

Conversion Gain @ LO = 0 dBm

*Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 200 MHz.

-20

-15

-10

-5

1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5

+ 25C

+ 85C

- 40C

CONVERSION GAIN (dB)

RF FREQUENCY (GHz)

-25

-20

-15

-10

-5

1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5

RF TO IF

LO TO RF

LO TO IF

ISOLATION (dB)

FREQUENCY (GHz)

-20

-15

-10

-5

1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5

LO = -4 dBm

LO = -2 dBm

LO = 0 dBm

LO = +2 dBm

LO = +4 dBm

CONVERSION GAIN (dB)

RF FREQUENCY (GHz)

-40

-32

-24

-16

-8

1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5

RETURN LOSS (dB)

FREQUENCY (GHz)

-20

-15

-10

-5

0 50 100 150 200 250 300 350 400 450 500

CONVERSION GAIN

RETURN LOSS

IF FREQUENCY (MHz)

RESPONSE (dB)

-20

-15

-10

-5

1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5

CONVERSION GAIN (dB)

RF FREQUENCY (GHz)

HMC485MS8G / 485MS8GE

HIGH IP3 GaAs MMIC MIXER with

INTEGRATED LO AMPLIFIER, 1.7 - 2.4 GHz

v03.0507

OBSOLETE

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

MIXERS - HIGH IP3 - SMT

9 - 294

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

Upconverter IP3

vs. LO Drive, IF= 200 MHz

1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5

- 2dBm

0dBm

- 2dBm

- 4dBm

INPUT IP3 (dBm)

FREQUENCY (GHz)

Input P1dB vs.

Temperature @ LO= 0 dBm

Input IP2 vs.

Temperature @ LO= 0 dBm

Input IP3 vs.

Temperature @ LO= 0 dBm

Input IP2 vs.

LO Drive @ IF= 200 MHz

Input IP3 vs. LO Drive

1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5

LO = -2dBm

LO = 0dBm

LO = +2dBm

LO = +4dBm

INPUT IP3 (dBm)

FREQUENCY (GHz)

1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5

+ 25C

+ 85C

- 40C

INPUT IP3 (dBm)

FREQUENCY (GHz)

1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5

+ 25C

- 40C

+ 85C

INPUT IP2 (dBm)

FREQUENCY (GHz)

1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5

- 2 dBm

0 dBm

+ 2 dBm

+ 4 dBm

INPUT IP2 (dBm)

FREQUENCY (GHz)

1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5

+ 25C

+ 85C

- 40C

INPUT P1dB (dBm)

FREQUENCY (GHz)

HMC485MS8G / 485MS8GE

HIGH IP3 GaAs MMIC MIXER with

INTEGRATED LO AMPLIFIER, 1.7 - 2.4 GHz

v03.0507

OBSOLETE

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

MIXERS - HIGH IP3 - SMT

9 - 295

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

Input IP3 vs. LO Drive, IF= 70 MHz Input IP3 vs. LO Drive, IF= 120 MHz

Input IP3 vs. LO Drive, IF= 170 MHz Input IP3 vs. LO Drive, IF= 247 MHz

Input IP3 vs. LO Drive, IF= 297 MHz

1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5

- 2 dBm

0 dBm

+ 2 dBm

+ 4 dBm

INPUT IP3 (dBm)

FREQUENCY (GHz)

1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5

- 2 dBm

0 dBm

+ 2 dBm

+ 4 dBm

INPUT IP3 (dBm)

FREQUENCY (GHz)

1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5

- 2 dBm

0 dBm

+ 2 dBm

+ 4 dBm

INPUT IP3 (dBm)

FREQUENCY (GHz)

1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5

- 2 dBm

0 dBm

+ 2 dbm

+ 4 dBm

INPUT IP3 (dBm)

FREQUENCY (GHz)

1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5

- 2dBm

0 dBm

+ 2dBm

+ 4dBm

INPUT IP3 (dBm)

FREQUENCY (GHz)

HMC485MS8G / 485MS8GE

HIGH IP3 GaAs MMIC MIXER with

INTEGRATED LO AMPLIFIER, 1.7 - 2.4 GHz

v03.0507

1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5

- 2 dBm

0 dBm

+ 2 dBm

+ 4 dBm

INPUT IP3 (dBm)

FREQUENCY (GHz)

OBSOLETE

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

MIXERS - HIGH IP3 - SMT

9 - 296

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

nLO

mRF 0 1 2 3 4

0 xx -1. 19 15 15

140302544

25469395655

37582837472

47882838382

RF Freq = 1.9 GHz @ 0 dBm

LO Freq = 1.7 GHz @ 0 dBm

All values in dBc Relative to the IF power level.

nLO Spur at RF Port

LO Freq GHz 1 2 3 4

1.5 19 15 35 24

1.6 17 15 33 24

1.7 14 14 29 23

1.8 10 15 25 24

1.9 8 20 22 23

26202224

LO power = 0 dBm

All values in dBc below input LO level measured at RF port.

MxN Spurious Outputs Harmonics of LO

HMC485MS8G / 485MS8GE

HIGH IP3 GaAs MMIC MIXER with

INTEGRATED LO AMPLIFIER, 1.7 - 2.4 GHz

v03.0507

OBSOLETE

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

MIXERS - HIGH IP3 - SMT

9 - 297

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

Absolute Maximum Ratings

RF/IF Input +27 dBm

LO Drive +10 dBm

Bias Supply (Vdd) +7 Vdc

Channel Temperature 150 °C

Continuous Pdiss (T = 85°C)

(Derate 13.2 mW/°C above 85°C) 0.85 W

Storage Temperature -65 to +150 °C

Operating Temperature -40 to +85 °C

IF DC Current ±40 mA

ESD Sensitivity (HBM) Class 1A

NOTES:

1. LEADFRAME MATERIAL: COPPER ALLOY

2. DIMENSIONS ARE IN INCHES [MILLIMETERS]

3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.

4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.

5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO

PCB RF GROUND.

ELECTROSTATIC SENSITIVE DEVICE

OBSERVE HANDLING PRECAUTIONS

HMC485MS8G / 485MS8GE

HIGH IP3 GaAs MMIC MIXER with

INTEGRATED LO AMPLIFIER, 1.7 - 2.4 GHz

v03.0507

Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]

HMC485MS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H485

XXXX

HMC485MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H485

XXXX

[1] Max peak re ow temperature of 235 °C

[2] Max peak re ow temperature of 260 °C

[3] 4-Digit lot number XXXX

Package Information

Outline Drawing

OBSOLETE

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

MIXERS - HIGH IP3 - SMT

9 - 298

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

Pin Number Function Description Interface Schematic

1LO This pin is AC coupled

and matched to 50 Ohms.

2N/C Not connected.

3, 6, 7 GND This pin must be connected to RF ground.

4Vdd Power supply for LO ampli er.

An external RF bypass capacitor is required.

5IF Port

This pin is DC coupled. For applications not requiring

operation to DC this port should be DC blocked externally

using a series capacitor. Choose value of capacitor to pass

IF frequency desired. For operation to DC, this pin must

not sink/source more than 40 mA of current or failure may

result.

8RF Port This pin is DC coupled

and matched to 50 Ohms.

Pin Descriptions

HMC485MS8G / 485MS8GE

HIGH IP3 GaAs MMIC MIXER with

INTEGRATED LO AMPLIFIER, 1.7 - 2.4 GHz

v03.0507

OBSOLETE

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

MIXERS - HIGH IP3 - SMT

9 - 299

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

Evaluation PCB

List of Materials for Evaluation PCB 105188 [1]

Item Description

J1 - J3 PCB Mount SMA RF Connector

J4 - J5 DC Pin

C1 10,000 pF Chip Capacitor, 0603 Pkg.

U1 HMC485MS8G / HMC485MS8GE Mixer

PCB [2] 104813 Evaluation Board, 1.0” x 1.0”

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

The circuit board used in the  nal application should

use RF circuit design techniques. Signal lines

should have 50 ohm impedance while the package

ground leads and exposed paddle should be con-

nected directly to the ground plane similar to that

shown. A sufficient number of via holes should be

used to connect the top and bottom ground planes.

The evaluation circuit board shown is available from

Hittite upon request.

HMC485MS8G / 485MS8GE

HIGH IP3 GaAs MMIC MIXER with

INTEGRATED LO AMPLIFIER, 1.7 - 2.4 GHz

v03.0507

OBSOLETE

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D