General Performance IEC Inlet Filter
Approvalsn Rated currents up to 20A
n Excellent performance/size ratio
n Optional medical versions (B type)
according to IEC/EN 60601-1
n Snap-in versions (S and S1 type)
n Hot inlet versions (HI type)
n Optional overvoltage protection
(Z type)
Typical applications
The FN 9222 IEC inlet filter combines an
IEC inlet and mains filter with excellent filter
attenuation in a small form factor. Choosing
the FN 9222 product line brings you the rapid
availability of a standard filter associated with
the necessary safety acceptances. Standard
IEC connector filters are a practical solution
helping you to pass EMI system approval in
a short time. A wide selection on amperage
ratings, output connections, mounting
possibilities and filters for medical applications
are designed to offer you the desired solution.
n Exceptional conducted attenuation
performance, based on chokes with high
saturation resistance and excellent thermal
behavior.
n Rear/front or snap-in mounting.
n Wide mounting flanges available.
n Optional medical versions (B type) comply
with the requirements of IEC/EN 60601-1
for creepage and clearance, leakage
current and high potential testing.
n 12 and 15A types with hot inlet available.
n Optional surge pulse protection.
n Different output connections offering
maximum flexibility for assembly.
n Custom-specific versions are available on
request.
n Portable electrical and electronic
equipment
n Small to medium-sized machines and
household equipment
n Single-phase power supplies, switch-mode
power supplies
n Test and measurement equipment
n Medical equipment
n Rack mounting equipment
Features and benefits
Technical specifications
Maximum continuous operating voltage: 250VAC, 50/60Hz
Operating frequency: dc to 400Hz
Rated currents: 1 to 20A @ 50°C
Approvals by rated current: 1 to 10A (ENEC, CQC)
16A (ENEC, CQC) for 16 and 20A types
1 to 20A (UL, CSA)
High potential test voltage: P –> PE 2000VAC for 2 sec (standard types)
P –> PE 2500VAC for 2 sec (B types)
P –> N 1000VAC for 2 sec (1 to 10A types, not Z types)
P –> N 250VAC for 2 sec (all Z types)
P –> N 1100VDC for 2 sec (16 and 20A types, not Z types)
Protection category: IP40 according to IEC 60529
Temperature range (operation and storage): -25°C to +85°C (25/85/21)
Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
(X to XX A, not Z types)
Flammability corresponding to: UL 94V-2 or better
Surge pulse protection (optional): 2kV, IEC 61000-4-5
MTBF @ 40°C/230V (Mil-HB-217F): ≤15A: 3,040,000 hours
≥16A: 2,256,000 hours
Typical electrical schematic
N
PE
P
Line
Cx R 2xL 2xCy
N‘
PE
P‘
Load
Z types
Standard, R and B types
N
PE
P
Line
Cx 2xL 2xCy
N‘
PE
P‘
Load
except HI-types
IEC Inlet Filters
FN 9222
* Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level.
Filter selection table
FN 9222x-1-.. 1 (1.2) 373 12 0.1 2.2 -06 -07 40
FN 9222x-3-.. 3 (3.5) 373 2.5 0.1 2.2 -06 -07 40
FN 9222x-6-.. 6 (7.2) 373 0.78 0.1 2.2 -06 -07 40
FN 9222x-8-.. 8 (10.6) 373 0.5 0.1 2.2 -06 -07 40
FN 9222x-10-.. 10 (11.6) 373 0.225 0.1 2.2 -06 -07 40
FN 9222x-12-.. 12 (12) 373 0.11 0.1 2.2 -06 -07 40
FN 9222x-15-.. 15 (15) 373 0.075 0.1 2.2 -06 -07 40
FN 9222x-12-..HI 12 (12) 373 0.11 0.1 2.2 -06 -07 40
FN 9222x-15-..HI 15 (15) 373 0.075 0.1 2.2 -06 -07 40
FN 9222xR-1-.. 1 (1.2) 373 12 0.1 2.2 1000 -06 -07 40
FN 9222xR-3-.. 3 (3.5) 373 2.5 0.1 2.2 1000 -06 -07 40
FN 9222xR-6-.. 6 (7.2) 373 0.78 0.1 2.2 1000 -06 -07 40
FN 9222xR-8-.. 8 (10.6) 373 0.5 0.1 2.2 1000 -06 -07 40
FN 9222xR-10-.. 10 (11.6) 373 0.225 0.1 2.2 1000 -06 -07 40
FN 9222xR-12-.. 12 (12) 373 0.11 0.1 2.2 1000 -06 -07 40
FN 9222xR-15-.. 15 (15) 373 0.075 0.1 2.2 1000 -06 -07 40
FN 9222xR-16-06 16 (18.5) 373 0.54 0.33 2.2 1000 -06 100
FN 9222xR-20-06 20 (23) 373 0.4 0.33 2.2 1000 -06 100
FN 9222xR-12-..HI 12 (12) 373 0.11 0.1 2.2 1000 -06 -07 40
FN 9222xR-15-..HI 15 (15) 373 0.075 0.1 2.2 1000 -06 -07 40
FN 9222xB-1-.. 1 (1.2) 2 12 0.1 1000 -06 -07 40
FN 9222xB-3-.. 3 (3.5) 2 2.5 0.1 1000 -06 -07 40
FN 9222xB-6-.. 6 (7.2) 2 0.78 0.1 1000 -06 -07 40
FN 9222xB-8-.. 8 (10.6) 2 0.5 0.1 1000 -06 -07 40
FN 9222xB-10-.. 10 (11.6) 2 0.225 0.1 1000 -06 -07 40
FN 9222xB-12-.. 12 (12) 2 0.11 0.1 1000 -06 -07 40
FN 9222xB-15-.. 15 (15) 2 0.075 0.1 1000 -06 -07 40
FN 9222xB-16-06 16 (18.5) 2 0.54 0.33 1000 -06 100
FN 9222xB-20-06 20 (23) 2 0.4 0.33 1000 -06 100
FN 9222xB-12-..HI 12 (12) 2 0.11 0.1 1000 -06 -07 40
FN 9222xB-15-..HI 15 (15) 2 0.075 0.1 1000 -06 -07 40
FN 9222UZ-1-06 1 (1.2) 373 12 0.1 2.2 -06 43
FN 9222UZ-3-06 3 (3.5) 373 2.5 0.1 2.2 -06 43
FN 9222UZ-6-06 6 (7.2) 373 0.78 0.1 2.2 -06 43
FN 9222UZ-8-06 8 (10.6) 373 0.5 0.1 2.2 -06 43
FN 9222UZ-10-06 10 (11.6) 373 0.225 0.1 2.2 -06 43
FN 9222UZ-12-06 12 (12) 373 0.11 0.1 2.2 -06 43
FN 9222UZ-15-06 15 (15) 373 0.075 0.1 2.2 -06 43
Filter Rated current Leakage current* Inductance Capacitance Resistance Output connections Weight
@ 50°C (25°C) @ 250VAC/50Hz L Cx Cy R
[A] [µA] [mH] [µF] [nF] [kΩ] [g]
> Components > FN 9222
Product selector
FN 9222xx-yy-..HI-zz
Snap-in range for S version only
Blank: Snap-in range 0.7 to 1.5mm
20: Snap-in range 1.5 to 2.2mm
Blank: Standard IEC inlet type C14 (1 to 15A types), C20 (16 and 20A types)
HI: Hot IEC inlet type C16 (12 and 15A types only)
06: Faston 6.3 x 0.8mm (spade/soldering)
07: Wire leads
1 to 20: Rated current
Blank: Standard version
R: Bleed resistor
B: Medical version (with bleed resistor and without Y2-capacitor)
Z: Optional surge pulse protection with additional varistor (MOV)
(Z types have longer housings, only available for FN 9222UZ-yy-06)
Blank: Standard housing with mounting flanges
U: Housing with wider mounting flanges
S: Snap-in version, snapper on vertical side (1 to 15A types only)
S1: Snap-in version, snapper on horizontal side (1 to 15A types only)
For example: FN 9222-15-07, FN 9222S1B-10-06-20, FN 9222R-12-06HI, FN 9222UZ-15-06
Per CISPR 17; A = 50Ω/50Ω sym; B = 50Ω/50Ω asym; C = 0.1Ω/100Ω sym; D = 100Ω/0.1Ω sym
Typical filter attenuation
1 and 3A types 6 to 10A types 12 and 15A types 16 and 20A types
> Components > FN 9222
A
C
B
E
G
S
FDI
6.3 x 0.8
J
H
FN 9222-HI
AC
B
E
G
S
FDI
6.3 x 0.8
J
H
Mechanical data
FN 9222, 1 to 15A types
FN 9222S FN 9222S1
AC
B
E
G
S
FDI
6.3 x 0.8
IEC plug type IEC plug type
C14
C14
C16
C20
C14
C14
J
6.3 x 0.8
J
IDF
B
A
G
E
Installation
T
H
A
B
E
GFDI
J
6.3 x 0.8
X
Y
Z
-07 connection style
Panel cut out
C
PR
M
N
FN 9222, 16 and 20A types
AC
B
E
G
S
FDI
6.3 x 0.8
J
H
FN 9222U
> Components > FN 9222
* For selecting the panel thickness, please refer to the filter selection table.
All dimensions in mm; 1 inch = 25.4mm
Tolerances according: ISO 2768-m / EN 22768-m
FN 9222 FN 9222U FN 9222UZ FN 9222S FN 9222S1 FN 9222-HI
1 to 8A 10 to 15A 16 and 20A 1 to 8A 10 to 15A 1 to 8A 10 to 15A 12 and 15A
Dimensions
A 48 48 53 51.85 51.85 29.9 29.9 29.9 29.9 48
B 22.5 22.5 30 25 25 22.4 22.4 22.4 22.4 22.5
C 40 ±0.2 40 ±0.2 42 ±0.2 40 ±0.2 40 ±0.2 40 ±0.2
D 38.4 38.4 66 38.25 46.8 38.4 38.4 38.4 38.4 38.4
E 27.8 27.8 34 27.8 27.8 27.8 27.8 27.8 27.8 27.8
F 5.5 5.5 4 5.5 5.5 5.5 5.5 5.5 5.5 5.5
G 20.1 20.1 26.5 20.1 20.1 20.1 20.1 20.1 20.1 20.1
H Ø3.3 Ø3.3 Ø3.5 Ø3.3 Ø3.3 Ø3.3
I 14 14 14 14.1 14 14 14 14 14 14
J 13.3 13.3 13.3 13.3 13.3 13.3 13.3 13.3 13.3 13.3
M R ≤ 3 R ≤ 3 R ≤ 3 R ≤ 3 R ≤ 3 R ≤ 1.5 R ≤ 1.5 R ≤ 1.5 R ≤ 1.5 R ≤ 3
N 21.5 21.5 27 21.5 21.5 20.8 20.8 21.9 21.9 21.5
P 28.5 28.5 34.7 28.5 28.5 29.4 29.4 28.5 28.5 28.5
R M3 M3 M3 M3 M3 M3
S 90° 90° 90° 90° 90° 90°
T* 0.7 - 1.5 0.7 - 1.5 0.7 - 1.5 0.7 - 1.5
T* 1.5 - 2.2 1.5 - 2.2 1.5 - 2.2 1.5 - 2.2
X AWG 18 AWG 16 AWG 18 AWG 16 AWG 18 AWG 16 AWG 16
Y 160 160 160 160 160 160 160
Z 6 6 6 6 6 6 6
Your local partner: To find your local partner within Schaffner’s global network, please go to www.schaffner.com February 2009
> Components > FN 9222
To find your local partner within
Schaffner‘s global network, please go to
www.schaffner.com
May 2011
© 2011 Schaffner EMC.
Specifications subject to change without
notice. All trademarks recognized.
Schaffner is an ISO-registered company.
Its products are designed and manufac-
tured under the strict quality and environ-
mental requirements of the ISO 9001 and
ISO 14001 standards.
This document has been carefully
checked. However, Schaffner does not
assume any liability for errors or inac-
curacies.
Headquarters and
global innovation and
development center
Schaffner Group
Nordstrasse 11
4542 Luterbach
Switzerland
T +41 32 681 66 26
F +41 32 681 66 30
info@schaffner.ch
www.schaffner.com
Sales and application centers
China
Schaffner EMC Ltd. Shanghai
Building 11, Lane 1365
East Kangqiao Road
Shanghai 201319
T +86 21 6813 9855
F +86 21 6813 9811
cschina@schaffner.com
www.schaffner.com
Germany
Schaffner Deutschland GmbH
Schoemperlenstrasse 12B
76185 Karlsruhe
T +49 721 56910
F +49 721 569110
germanysales@schaffner.com
Finland
Schaffner Oy
Tynninkuja 7
08700 Lohja
T +358 19 35 72 71
F +358 19 32 66 10
finlandsales@schaffner.com
France
Schaffner EMC S.A.S.
112, Quai de Bezons
95103 Argenteuil
T +33 1 34 34 30 60
F +33 1 39 47 02 28
francesales@schaffner.com
Italy
Schaffner EMC S.r.l.
Via Galileo Galilei, 47
20092 Cinisello Balsamo (MI)
T +39 02 66 04 30 45/47
F +39 02 61 23 943
italysales@schaffner.com
Japan
Schaffner EMC K.K.
Mitsui-Seimei Sangenjaya Bldg. 7F
1-32-12, Kamiuma, Setagaya-ku
Tokyo 154-0011
T +81 3 5712 3650
F +81 3 5712 3651
japansales@schaffner.com
www.schaffner.jp
Sweden
Schaffner EMC AB
Turebergstorg 1, 6
19147 Sollentuna
T +46 8 5792 1121 / 22
F +46 8 92 96 90
swedensales@schaffner.com
Switzerland
Schaffner EMV AG
Nordstrasse 11
4542 Luterbach
T +41 32 681 66 26
F +41 32 681 66 41
sales@schaffner.ch
Singapore
Schaffner EMC Pte Ltd.
Blk 3015A Ubi Road 1
05-09 Kampong Ubi Industrial
Estate
T +65 6377 3283
F +65 6377 3281
singaporesales@schaffner.com
Spain
Schaffner EMC España
Calle Caléndula 93,
Miniparc III, Edificio E
El Soto de la Moraleja,
Alcobendas
28109 Madrid
T +34 618 176 133
spainsales@schaffner.com
Taiwan
Schaffner EMV Ltd.
6th Floor, No 413
Rui Guang Road
Neihu District
Taipei City 114
T +886 2 87525050
F+886 2 87518086
taiwansales@schaffner.com
Thailand
Schaffner EMC Co. Ltd.
Northern Region Industrial Estate
67 Moo 4 Tambon Ban Klang
Amphur Muang P.O. Box 14
Lamphun 51000
T +66 53 58 11 04
F +66 53 58 10 19
thailandsales@schaffner.com
UK
Schaffner Ltd.
5 Ashville Way
Molly Millars Lane
Wokingham
Berkshire RG41 2PL
T +44 118 9770070
F +44 118 9792969
uksales@schaffner.com
www.schaffner.uk.com
USA
Schaffner EMC Inc.
52 Mayfield Avenue
Edison, New Jersey 08837
T +1 732 225 9533
F +1 732 225 4789
usasales@schaffner.com
www.schaffner.com/us
