NC7MX-B 7 pole male cable connector with black metal housing and gold contacts. The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables. Features & Benefits * Rugged zinc diecast shell, long lasting and durable * Boot with rubber gland gives high protection against * UL recognized components bending stresses NC7MX-B * Chuck type strain relief system for secure clamping of * Coloured rings and boots available for coding and cables marking 1/3 Technical Information Product Title NC7MX-B Connection Type XLR Gender male Electrical Capacitance between contacts 9 pF Contact resistance 3 m Dielectric strength 1,5 kVdc Insulation resistance > 10 G (initial) Rated current per contact 5A Rated voltage < 50 V Mechanical Cable O.D. 3.5 - 8.0 mm Insertion force 20 N Withdrawal force 20 N Lifetime > 1000 mating cycles Wiresize max. 1.0 mm Wiresize max. 18 AWG Wiring Solder contacts Locking device Latch lock NC7MX-B 2/3 Material Boot Polyurethan Contact plating 0.2 m Au hard alloy over 2 m Ni Contacts Brass (CuZn39Pb3) Insert Polyamide (PA 6.6 30 % GR) Locking element Zinc diecast (ZnAl4Cu1) Shell Zinc diecast (ZnAl4Cu1) Shell plating Black chromium Strain relief Polyacetal (POM) Environmental Approvals UL Flammability UL 94 HB Standard compliance IEC 61076-2-103 Protection class IP 40 Solderability Complies with IEC 68-2-20 Temperature range -30 C to +80 C NC7MX-B 3/3