Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations.
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Long life snap-ins, 105℃
KMM
S
e
ri
es
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Items
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Rated voltage (Vdc)
tan
δ
(Max.)
Z(
-
25℃)/Z(+20℃)
Rated voltage (Vdc)
The following specifications shall be satisfied when the capacitors are restored to 20
℃
after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage)for 3,000 hours (2,000 hours forφ20×20L products) at 105℃.
Capacitance change
Leakage current
The following specifications shall be satisfied when the capacitors are restored to 20
℃
after exposing them for 1,000 hours at 105
℃
without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
Leakage current
Characteristics
160 to 400V
0.15
160 to 400V
4
420 & 450V
0.20
420 & 450V
8
(at 120Hz)
●Terminal Code : LI (φ35)
Vent
Negative mark
Sleeve (PET : Brown) PC board pin-out
2
-
1.2×6
4.2±0.5
KMM
Longer life
Longer life
Downsized
KMQ
KMS
LXQLXS
*
4.0±0.5 4.5±1
5±0.5
14.2±1
φD+1max.
Vent L
±
2
L
±
2
Negative mark
Sleeve (PET : Brown) PC board pin-out
10
2
-
φ2
Supplement code
Size code
Capacitance tolerance code
Dummy terminal code
Terminal code (VS, LI)
Voltage code (ex. 160V:161, 250V:251, 315V:3B1)
Series code
Category
E K MM V S N SM
13426789101312518171611 1514
Please refer to "Product code guide (snap-in type)"
The standard design has no plastic disc.
◆SPECIFICATIONS
-
25 to +105℃
(tanδ)
160 to 450V
dc
(at 20℃, 120Hz)
(at 20℃, 120Hz)
(at 20℃ after 5 minutes)
≦±20% of the initial value
≦200% of the initial specified value
≦The initial specified value
≦±15% of the initial value
≦150% of the initial specified value
≦The initial specified value
D.F. (tanδ)
D.F. (tanδ)
●Terminal Code : VS (φ20 toφ35) : Standard
◆DIMENSIONS [mm]
φD+1max.
◆PART NUMBERING SYSTEM
Capacitance code (ex. 120µF:121, 1,000µF:102)
Longer life
(1/5)
●Longer life from KMQ series
●Endurance with ripple current : 2,000 to 3,000 hours at 105
℃
●Non solvent resistant type
●RoHS Compliant
I
≦
3 CV
±20% (M)
*φD=35mm : 3.5±0.5mm
CAT. No. E1001M