OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages Features: * * * * 5,000 Vrms electrical isolation Choice of a Single and Dual LED Phototransistor or Photo Darlington Sensor Low-cost plastic Dual-In-Line (DIP) package Agency Approvals: * * UL Certification No: E58730 VDE No: 40026625 40026536, 40026654 Description: The OPIA series optocouplers are designed for applications that use an analog output (Phototransistor or Photodarlington) in a surface mount package. A wide selection of configurations are available. With typical isolation voltage of 5,000 Volts(RMS), these products meet typical power system isolation requirements. Theory of operation: The LED transmitter is used to illuminate the Photosensor providing electrical isolation between two power systems while maintaining the ability to transmit information from one power system to the other. In many applications, analog signal levels may be required to be transmitted between two power systems while maintaining isolation between the power systems up to 5,000 Volts(RMS). A variety of LED and photosensor configurations are available depending on the system requirements. The ratio Current Transfer Ratio (CTR) is determined using the output current and input current for analog photosensors. CTR ratios can range from as low as 5 to over 9,000 depending on the device. CTR = Photosensor - Current 20mA = * 100 = 200 10mA LED - Current All SMD products are shipped in a shipping tube with "TR" identified on the end of the part number. Example: OPIA817ATRE is a 4-Pin SMD shipped in tape and reel (TR) Applications: * * * * * High voltage isolation: 5,000 Volts(RMS) PCBoard power system isolation Industrial equipment power isolation Medical equipment power isolation Office equipment RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09 Page 1 of 21 OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages Package Outline Dimensions and Schematics: Top-View Package Style B (SOP) Package Style C (SSOP) Package Style A (SMD) Pin # Part Number 1 2 3 4 OPIA817A A K E C OPIA814A A-K K-A E C OPIA815A A K E C OPIA4010A A K E C OPIA1210A A K E C OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 8/09 Page 2 of 21 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages Analog Output Devices Ordering Information Part Number Isolation Voltage Max. (Vrms) CTR Min/Typ/Max Typ. Tr / Tf (s) RL = 100 ohms Package Configuration OPIA817A 5,000 50 / - / 600 4/3 4-Pin SMD A K--C E OPIA814A 5,000 60 / - / 600 5/4 4-Pin SMD A K, K A--C E OPIA815A 5,000 70 / - / - 80 / 72 4-Pin SMD A K--C E (Dar) OPIA4010A 5,000 600 / - / 9,000 60 / 50 4-Pin SMD A K--C E (Dar) OPIA1210A 5,000 50 / - / 600 2/3 4-Pin SMD A K--C E E = Emitter (Dar) = Photodarlington Configuration: Definition of Terms LED Identification--Sensor Identification Configuration Information Packaging LED Sensor A = Anode K = Cathode B = Base C = Collector Part Number Suffix: TU = Shipped in Tubes Example: OPIA817DTUE OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09 Page 3 of 21 OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature OPIA817, OPIA4010, OPIA1210 -55 C to +125 C Operating Temperature All except the part numbers noted below -30 C to +100 C Isolation voltage (1 minute) OPIA817, OPIA814, OPIA815, OPIA4010, OPIA1210 5,000 Vrms Total Package Power Dissipation OPIA817, OPIA814, OPIA815, OPIA4010, OPIA1210 200 mW Lead Soldering Temperature (1/16" (1.6 mm) from case for 5 seconds with soldering iron) 260 C Input Diode Continuous Forward Current All except the part number noted below 50 mA Peak Forward current (1 s pulse width, 300 pps) All except the part number noted below 1A Reverse Voltage OPIA817, OPIA815, OPIA4010, OPIA1210, OPIA814, OPIA4010 6V Power Dissipation OPIA817, OPIA814, OPIA4010, OPIA1210, OPIA815 70 mW Output Phototransistor Collector-Emitter Voltage OPIA817, OPIA814 OPIA4010 OPIA815 OPIA1210 60 V 300 V 35 V 350 V Emitter-Collector Voltage OPIA817, OPIA814, OPIA815 OPIA4010 OPIA1210 6V 0.1 V 7V Collector Current OPIA817, OPIA814, OPIA1210, OPIA414 OPIA4010 OPIA815 50 mA 150 mA 80 mA Power Dissipation All except the part numbers noted below OPIA4010 150 mW 200 mW OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 8/09 Page 4 of 21 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages Electrical Characteristics SYMBOL PARAMETER MIN TYP MAX 1.0 1.2 1.2 1.4 1.3 UNITS TEST CONDITIONS Input Diode VF VFM IR Ct Forward Voltage All except those noted below OPIA1210 IF = 20 mA IF = 10 mA V Peek Forward Voltage OPIA814, OPIA4010 OPIA817, OPIA815, OPIA1210 - - 3.5 3.0 Reverse Current All except those noted below OPIA814 OPIA1210 - - 10 Terminal Capacitance All except those noted below OPIA815 - V IFM = 500 mA 10 A VR = 4 V VR = 5 V 30 30 250 pf V = 0.0 V, f = 1K Hz V = 0.0 V, f = 1K Hz - 10 100 200 Collector-emitter Saturation Voltage OPIA817 OPIA814 OPIA1210 - 0.1 0.1 - 0.2 0.3 0.4 Cutt-Off frequency All except those noted below OPIA817, OPIA814, OPIA1210 - 80 - K Hz VCC = 5 V, IC = 2 mA, RL = 100 Rise Time OPIA817 OPIA814 OPIA1210 - 4 5 2 18 20 - s VCC = 2 V, IC = 2 mA, RL = 100 VCC = 2 V, IC = 2 mA, RL = 100 VCC = 10 V, IC = 2 mA, RL = 100 Fall Time OPIA817D OPIA814 OPIA1210 - 3 4 3 18 20 - Output Phototransistor ICEO VCE(SAT) fC tR tF Collector dark Current OPIA817, OPIA814 OPIA1210 nA V s IF = 0 mA, VCE = 20 V IF = 0 mA, VCE = 300 V IF = 20 mA, IC = 1 mA IF = 20 mA, IC = 1 mA IF = 8 mA, IC = 2.4 mA VCC = 2 V, IC = 2 mA, RL = 100 VCC = 2 V, IC = 2 mA, RL = 100 VCC = 10 V, IC = 2 mA, RL = 100 Continued on Next Page OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09 Page 5 of 21 OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages Electrical Characteristics (OPIA817 Series) - Continued from Previous Page SYMBOL PARAMETER MIN TYP MAX Collector dark Current OPIA4010 OPIA815 - - 1.0 1.0 Collector-emitter Saturation Voltage OPIA815 OPIA4010 - 0.8 - 1.0 1.5 UNITS TEST CONDITIONS Output PhotoDarlington ICEO VCE(SAT) fC A IF = 0 mA, VCE = 200 V IF = 0 mA, VCE = 10 V IF = 20 mA, IC = 5 mA IF = 20 mA, IC = 5 mA V Cut-Off frequency OPIA815 OPIA4010 Rise Time OPIA815 OPIA4010 1.0 - 6.0 7.0 - - 80 60 300 300 tR K Hz VCC = 2 V, IC = 20 mA, RL = 100 VCC = 5 V, IC = 2 mA, RL = 100 VCC = 2 V, IC = 20 mA, RL = 100 VCC = 2 V, IC = 20mA, RL = 100 s Fall Time OPIA815 OPIA4010 - 72 50 VCC = 2 V, IC = 20 mA, RL = 100 VCC = 2 V, IC = 20 mA, RL = 100 250 250 tF s Coupled Characteristics Current Transfer Ratio OPIA817, OPIA1210 OPIA814 OPIA815 OPIA4010 50 60 70 600 - CTR Cf RISO IF = 5.00 mA, VCE = 5.0 V IF = 1.00 mA, VCE = 2.0 V IF = 0.05 mA, VCE = 3.3 V IF = 1.00 mA, VCE = 2.0 V 600 600 9,000 % Floating Capacitance Isolation resistance - 0.6 1.0 pF 5X1010 1011 - ohm V = 0.0 V, f = 1M Hz C500V, 40% to 60%RH OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 8/09 Page 6 of 21 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages OPIA814 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09 Page 7 of 21 OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages OPIA814 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 8/09 Page 8 of 21 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages OPIA815 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09 Page 9 of 21 OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages OPIA815 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 8/09 Page 10 of 21 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages OPIA817 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09 Page 11 of 21 OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages OPIA817 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 8/09 Page 12 of 21 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages OPIA1210 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09 Page 13 of 21 OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages OPIA1210 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 8/09 Page 14 of 21 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages OPIA4010 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09 Page 15 of 21 OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages OPIA4010 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 8/09 Page 16 of 21 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages Quality / Reliability Requirements Failure Criteria Conditions 10% 11 samples after 500Hrs 0 Fail @ VCE = 5.0VDC, Ta = 70C 10% 50 samples after 96Hrs 0 Fail @ Max PD, Ta = 25C MTTF @ 90% confidence 150,000 Min. @ 25C, 25mADC Moisture Sensitivity Level MSL 1 per JDEC stnd J-STD-020B Lead Solderability 0 Fail per Method 208 of MIL-STD-202. 125C Min. DSC test method Temperature Humidity-Bias 20% 85C, 85%RH, 500Hrs, 80% min Iceo Temperature Cycle 20% per Method 1010.7 of MIL-STD-883E High Temperature Storage 20% 85C, 500Hrs Autoclave 0 Fail TA = 121C, Pressure = 15psi, Humidity = 100%, Time = 96Hrs Parameter HTRB D IC(OFF) HTFB D IC(ON) Glass Transition of body Note: This is to be performed when a change occurs to form, fit or function. Government and Industry Standard Compliance Requirements European Union's Reduction of Hazardous Substances (RoHS) Directive 2002/95/EC Label Identification Carrollton, TX, USA DESCRIPTION: Size: 3" (7.4 cm) X 2.2" (5.5 cm) Lettering shall be black on white background. Format shall be as: Notes: 1. The DATE CODE is a 4-digit code for date of manufacture where YY is the last two digits of the year, and WW is week number of manufacture. 2. The LOT I.D. is the manufacturing location lot identification where Y is the year of manufacture, NNNN is a sequential lot identifier, and DDD is the day of the year of manufacture. - or use equivalent label format. MADE IN TAIWAN OPTEK P/N __OPIA407C-TR__ IIIIIIIIIIIIIIIIIIIII QTY. ________N/A_________ IIIIIIIIIIIIIIIIIIIII DATE CODE _____(YYWW)___ IIIIIIIIIIIIIIIIIIIII LOT I.D. ____(Y-NNNNDDD)__ IIIIIIIIIIIIIIIIIIIII OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09 Page 17 of 21 OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages Tube Packaging Information: Tube Optek's Optocoupler Part Numbers Packaging Quantities 4-PIN OPIA817D/A, OPIA814D/A OPIA1210D/A P/H and 6-PIN SMD OPIA6XXD/A Series 8-PIN OPIA8XXD Series and OPID804D Qty Inner Small Carton Medium Carton Large Carton 52 x 7 x 7.5 cm 53.5 x 16 x 17.5 cm 53.5 x 30.7 x 17.5 cm 53.5 x 30.7 x 25 cm Weight Qty Weight Qty Weight Gross Weight Qty Weight Gross Weight Qty Gross Weight Weig ht 100 44 3,000 1.40 12,000 6.0 6.5 24,000 12.0 12.5 36,000 18.0 18.5 65 44 1,950 1.50 7,800 6.5 7.0 15,600 12.0 12.5 23,400 18.5 19.0 48 44 1,440 1.44 5,760 6.0 6.5 11,520 12.0 12.5 17,290 18.0 18.5 100 24 6,000 1.60 24,000 6.5 7.0 48,000 13.0 13.5 72,000 19.5 20.0 170 -- 10,200 -- M/F 4-PIN and 5-PIN OPIA401B - OPIA404B, OPIA414B, SOP OPIA500B 4-PIN SSOP OPIA405C - OPIA409C P/H = Pin-Hole Packages (Referred as D = Dual-In-Line Package) SMD = Standard Surface Mount Packages (Referred as A = 6.5mil SMD) M/F or SOP = Mini-Flat Packages or Small Outside Packages (Referred as B = 4.40mil SMD w/ 2.54mil LeadSpacing) SSOP = Shrink SOP Packages (Referred as C = 3.60mil SMD with 1.27mil Lead-Spacing) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 8/09 Page 18 of 21 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages Tube Packaging Specifications--SMD-- (TU): DIMENSIONS ARE IN: INCHES [MILLIMETERS] Quantity: 4-pin (SMD): 100pcs/tube TOLERANCE: 0.008 INCHES [ 0.2 MILLIMETERS] Tube Packaging Specifications-- SOP (Mini-flats) and SSOP-- (TU): Quantity: 4-pin (SOP): 100pcs/tube 4-pin (SSOP): 170pcs/tube OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09 Page 19 of 21 OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages Tape and Reel Packaging Specifications-- SMD and SOP--(TR): Tape Feeder: Direction: Quantity: 4-pin (SMD): 1000pcs/Reel 4-pin (SOP): 1000pcs/Reel 4-pin (SSOP): 3000pcs/Reel DIMENSIONS ARE IN: INCHES [MILLIMETERS] TOLERANCE: 0.008 INCHES [ 0.2 MILLIMETERS] Reel: OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 8/09 Page 20 of 21 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 SMD, SOP and SSOP Packages Tape and Reel Packaging Specifications-- SSOP--(TR): .0780.008 [2.00.02] .1570.008 [4.00.02 ] O.0590.004 [O1.500.05] 0.4720.008 [12.0 0.02] O.0590.004 [O1.500.05] 0.2850.008 [7.25 0.02] 0.0680.008 [1.75 0.02] 0.0880.008 [2.25 0.02] .1570.008] [4.00.02] .1000.008 [2.550.02] Direction: DIMENSIONS ARE IN: INCHES [MILLIMETERS] TOLERANCE: 0.008 INCHES [ 0.2 MILLIMETERS] Reel: O.5310.02 [O13.50.5] 2.360.04 [601.0] O7.000.04 [O1781.0] O.0980.02 [2.50.5] .5110.04 [130.5] O.8260.04 [O211.0] .6290.04 [16.00.5] Quantity: 4-pin (SSOP): 2000pcs/Reel OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09 Page 21 of 21