VSD-200C-24 - V-Infinity - Product.Network

V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258



•

VSD-200C Single Output DC-DC Converter

VSD-200C-5 VSD-200C-12 VSD-200C-24 VSD-200C-48

DC output voltage 5V 12V 24V 48V

Output rated current 40A 16.7A 8.4A 4.2A

Output current range 0-40A 0-16.7A 0-8.4A 0-4.2A

Rated power 200W 200.4W 201.6W 201.6W

Ripple & Noise (max.) see note 2 100mVp-p 120mVp-p 150mVp-p 200mVp-p

Voltage adj. range 4.5-5.5Vdc 11-16Vdc 23-30Vdc 43-53Vdc

Voltage tolerance see note 3 ±2% ±1% ±1% ±1%

Line regulation ±0.5% ±0.5% ±0.5% ±0.5%

Load regulation ±1% ±1% ±1% ±1%

Setup, rise time 300ms, 50ms at full load

Voltage range 36-72Vdc

Efficiency 81% 84% 86% 86%

DC current 6.7A/48V 6.5A/48V 6.2A/48A 6.2A/48V

Inrush current (max.) 50A/48Vdc

Overload protection 105%~135% rated output power

Over voltage protection 5.75-6.75V 16.8-20V 31.5-37.5V 53-65V

Protection type: shut down o/p voltage, re-power on to recover

Over temp. protection 100°C±5°C TSW1TSW1 detect on main power transistor

Protection type: shut down o/p voltage, recovers automatically after temp goes down

Working temp. -20 ~ +60°C (refer to output derating curve)

Working humidity 20 ~ 90% RH non-condensing

Storage temp., humidity -40°C~+85°C, 10%-95% RH

Temperature coefficient ±0.3%/ °C(0~50°C)

Vibration 10~500Hz, 2G 10 min./1 cycle, period fo 60 min. each axes

Safety standards 24V and 48V input design refer to LVD

Withstand voltage I/P-O/P: 1.5KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC for 1 min.

Isolation resistance I/P-O/P, I/P-FG, O/P-FG: 500VDC

EMI conduction & radiation compliance to EN55022 (CISPR22) Class B

EMS immunity Compliance to EN6100-4,2,3,4,6,8; ENV50204 heavy industry level, criteria A

MTBF 218.2K hrs. min MIL-HDBK-217F (25 °C)

Vibration 10~500Hz, 2G 10 min./1 cycle, period fo 60 min. each axes

Dimensions 8.46x4.53x1.97 inches (215x115x50mm)

Packing 2.42lbs (1.1Kgs); 12pcs./31.75lb./0.98CUFT

Notes: 1. All parameters NOT specifically mentioned are measured at 24, 48, 96Vdc input, rated load and 25°C of ambient

temperature.

2. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor

4. Tolerance: includes set up tolerance, line regulation and load regulation.

5. The power supply is considered a component which will be installed into a final equipment. The final eqipment must

be re-confirmed that it still meets EMC directives.

V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise

customers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for

customer’s applications using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s

published specifications. Nothing will be covered outside of standard product warranty.

Features

·2:1 wide input range

·Protections: Short circuit/Over load/Over voltage/

Over temperature

·1500 I/O isolation

·Cooling by free air convection

·100% full load burn-in test

·2 year warranty