Devices AlGaAs
Orange Red HER Green Package
HDSP- HDSP- HDSP- HDSP- Description Drawing
A411 A111 A211 A511 7.6 mm Common Anode Right Hand Decimal A
A413 A113 A213 A513 7.6 mm Common Cathode Right Hand Decimal B
F411 F111 F211 F511 10 mm Common Anode Right Hand Decimal C
F413 F113 F213 F513 10 mm Common Cathode Right Hand Decimal D
G411 G111 G211 G511 10 mm Two Digit Common Anode Right Hand Decimal E
G413 G113 G213 G513 10 mm Two Digit Common Cathode Right Hand Decimal F
H411 H111 H211 H511 14.2 mm Common Anode Right Hand Decimal G
H413 H113 H213 H513 14.2 mm Common Cathode Right Hand Decimal H
K411 K111 K211 K511 14.2 mm Two Digit Common Anode Right Hand Decimal I
K413 K113 K213 K513 14.2 mm Two Digit Common Cathode Right Hand Decimal J
Description
These devices use industry standard size package
and pinout. Available with black surface finish. All
devices are available as either common anode or
common cathode.
Typical applications include appliances, channel
indicators of TV, CATV converters, game machines,
and point of sale terminals.
HDSP-AX11/-AX13 Series, HDSP-FX11/-FX13 Series
HDSP-GX11/-GX13 Series, HDSP-HX11/-HX13 Series
HDSP-KX11/-KX13 Series
Features
•Black surface and color tinted epoxy
•Industry standard size
•Industry standard pinout
•Choice of character size
7.6 mm (0.30 in.), 10 mm (0.40 in.), 14.2 mm (0.56 in.)
•Choice of colors
AlGaAs Red, High Efficiency Red (HER), Green, Orange
•Excellent appearance
Evenly lighted segments
± 50° Viewing angle
•Design flexibility
Common anode or common cathode
Single and two digit
•Categorized for luminous intensity
Categorized for color: Green
Use of like categories yields a uniform display
•Excellent for long digit string multiplexing
HDSP-Ax11
Black Surface Seven Segment Displays
Data Sheet
2
Part Numbering System
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago
representative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube
(exceptions may apply). Please refer to respective datasheet for specific bin limit information.
5082 - X X X X-X X X X X
HDSP-X X X X-X X X X X
Mechanical Options[1]
00: No Mechanical Option
Color Bin Options[1,2]
0: No Color Bin Limitation
Maximum Intensity Bin[1,2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin[1,2]
0: No Minimum Intensity Bin Limitation
Device Configuration/Color[1]
1: Common Anode
3: Common Cathode
Device Specific Configuration[1]
Refer to Respective Datasheet
Package[1]
A: 7.6 mm (0.3 inch) Single Digit Seven Segment Display
F: 10 mm (0.4 inch) Single Digit Seven Segment Display
G: 10 mm (0.4 inch) Dual Digit Seven Segment Display
H: 14.2 mm (0.56 inch) Single Digit Seven Segment Display
K: 14.2 mm (0.56 inch) Dual Digit Seven Segment Display
3
Package Dimensions (7.6 mm Series) Internal Circuit Diagram
Package Dimensions (10 mm Series: Single) Internal Circuit Diagram
4
Package Dimensions (10 mm Series: Two Digit) Internal Circuit Diagram
5
Package Dimensions (14.2 mm Series: Single) Internal Circuit Diagram
Package Dimensions (14.2 mm Series: Two Digit) Internal Circuit Diagram
2
1DIGIT NO. 1 CATHODE
6
Absolute Maximum Ratings
AlGaAs Red HER/Orange Green
HDSP-X11X HDSP-X21X/X41X HDSP-X51X
Description Series Series Series Units
Average Power per Segment or DP 37 105 105 mW
Peak Forward Current per Segment or DP 45 90[1] 90[3] mA
DC Forward Current per Segment or DP 15[5] 30[2] 30[4] mA
Operating Temperature Range –20 to +100 –40 to +100 °C
Storage Temperature Range –55 to +100 °C
Reverse Voltage per Segment or DP 3.0 V
Wave Soldering Temperature for 3 Seconds 250 °C
(1.60 mm [0.063 in.] below Body)
Notes:
1. See Figure 5 to establish pulsed conditions.
2. Derate above 53°C at 0.45 mA/°C (see Figure 7).
3. See Figure 6 to establish pulsed conditions.
4. Derate above 39°C at 0.37 mA/°C (see Figure 7).
5. Derate above 91°C at 0.53 mA/°C (see Figure 1).
Electrical/Optical Characteristics at TA = 25°C
AlGaAs Red
Device Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
A11X Luminous Intensity/Segment[1,2] IV315 600 µcd IF = 1 mA
(Digit Average) 3600 IF = 5 mA
F11X, G11X 330 650 IF = 1 mA
3900 IF = 5 mA
H11X, K11X 400 700 IF = 1 mA
4200 IF = 5 mA
All Devices Forward Voltage/Segment or DP VF1.6 2.0 V IF = 1 mA
1.7 IF = 5 mA
1.8 22 IF = 20 mA Peak
Peak Wavelength lPEAK 645 nm
Dominant Wavelength[3] ld637 nm
Reverse Voltage/Segment or DP[4] VR3.0 15 V IR = 100 µA
Temperature Coefficient of ∆VF/°C-2 mV/°C
VF/Segment or DP
A11X Thermal Resistance LED RqJ-PIN 255 °C/W/
F11X, G11X Junction-to-Pin 320 Seg.
H11X, K12X 400
7
High Efficiency Red
Device Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
A21X Luminous Intensity/Segment[1,2] IV360 980 µcd IF = 5 mA
(Digit Average) 5390 IF = 20 mA
F21X, G21X 420 1200 IF = 5 mA
H21X, K21X 900 2800 IF = 10 mA
3700 IF = 60 mA Peak:
1/6 Duty Factor
All Forward Voltage/Segment or DP VF2.0 2.5 V IF = 20 mA
Devices Peak Wavelength lPEAK 635 nm
Dominant Wavelength[3] ld626 nm
Reverse Voltage/Segment or DP[4] VR3.0 30 V IR = 100 µA
Temperature Coefficient of ∆VF/°C-2 mV/°C
VF/Segment or DP
A21X Thermal Resistance LED RqJ-PIN 200 °C/W/
F21X, G21X Junction-to-Pin 320 Seg.
H21X, K21X 345
Orange
Device Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
A41X Luminous Intensity/Segment IV0.70 mcd IF = 5 mA
F41X, G41X (Segment Average)[1,2] 1.0 IF = 5 mA
H41X, K41X 2.37 IF = 10 mA
All Forward Voltage/Segment or DP VF2.0 2.5 V IF = 20 mA
Devices Peak Wavelength lPEAK 600 nm
Dominant Wavelength[3] ld603 nm
Reverse Voltage/Segment or DP[4] VR3.0 30 V IR = 100 µA
Temperature Coefficient of ∆VF/°C–2 mV/°C
VF/Segment or DP
A41X Thermal Resistance LED RqJ-PIN 200 °C/W/
F41X, G41X Junction-to-Pin 320 Seg.
H41X, K41X 345
8
High Performance Green
Device Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
A51X Luminous Intensity/Segment[1,2] IV860 3000 µcd IF = 10 mA
(Digit Average) 6800 IF = 20 mA
F51X, G51X 1030 3500 IF = 10 mA
H51X, K51X 900 2500 IF = 10 mA
3100 IF = 60 mA Peak:
1/6 Duty Factor
All Forward Voltage/Segment or DP VF2.1 2.5 V IF = 10 mA
Devices Peak Wavelength lPEAK 566 nm
Dominant Wavelength[3,5] ld571 577 nm
Reverse Voltage/Segment or DP[4] VR3.0 50 V IR = 100 µA
Temperature Coefficient of ∆VF/°C-2 mV/°C
VF/Segment or DP
A51X Thermal Resistance LED RqJ-PIN 200 °C/W/
F51X, G51X Junction-to-Pin 320 Seg.
H51X, K51X 345
Notes:
1. Case temperature of device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. Green (HDSP-A51X/F51X/G51X/H512X/K51X) series displays are categorized for dominant wavelength. The category is designated by a number
adjacent to the luminous intensity category letter.
9
Figure 3. Relative luminous intensity vs. dc
forward current. Figure 4. Relative efficiency (luminous intensity per unit
current) vs. peak current.
Figure 1. Maximum allowable average or dc
current vs. ambient temperature. Figure 2. Forward current vs. forward voltage.
16
0
2
4
6
8
10
12
14
20 10090
807060504030
T – AMBIENT TEMPERATURE – °C
A
I AVE. MAX – MAXIMUM AVERAGE
FORWARD CURRENT PER SEGMENT – mA
F
120110
20
18 R = 770°C/W
θθ
θθJ-A
F
50.0
20.0
10.0
5.0
2.0
1.0
0.5
0.1
0 0.5 1.0 1.5 2.0 2.5
V – FORWARD VOLTAGE – V
F
I – FORWARD CURRENT
PER SEGMENT – mA
20
10
5
2
1
0.5
0.2
0.10.1 0.2 0.5 12510 20
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 1 mA)
I – FORWARD CURRENT
PER SEGMENT – mA
F
I – PEAK FORWARD CURRENT
PER SEGMENT – mA
PEAK
ηη
ηη – RELATIVE EFFICIENCY –
NORMALIZED TO 1 AT 1 mA
PEAK
1.3
1.2
1.1
1.0
0.9
0.8
051020 30 40 50
0.7
0.5 mA
AlGaAs Red
10
HER, Green, Orange
Figure 7. Maximum allowable dc current vs.
ambient temperature. Figure 8. Forward current vs. forward voltage
characteristics.
Figure 9. Relative luminous intensity vs. dc
forward current. Figure 10. Relative efficiency (luminous intensity per unit
current) vs. peak current.
40
0
5
10
15
20
25
30
35
20 10090807060504030
T – AMBIENT TEMPERATURE – °C
A
I MAX – MAXIMUM DC CURRENT
PER SEGMENT – mA
DC
120
110
50
45
HER / ORANGE
GREEN
R = 770°C/W
θJ-A
0
100
80
60
40
20
I – FORWARD CURRENT PER SEGMENT – mA
F
2.0 4.03.01.0
V – FORWARD VOLTAGE – V
F
0 5.0
HER / ORANGE
GREEN
η
PEAK
– RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 5 mA FOR HER,
AND TO 1 AT 10 mA FOR GREEN)
15
0
10
8
6
4
2
2053010 25
12
I – FORWARD CURRENT PER SEGMENT – mA
F
0
GREEN
HER / ORANGE
0
I – PEAK FORWARD CURRENT
PER SEGMENT – mA
PEAK
0.8
1.0
1.2
1.4
10020 806040
1.8
1.6
GREEN
HER / ORANGE
ηPEAK – RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 5 mA FOR HER,
AND 10 mA FOR GREEN)
Figure 5. Maximum tolerable peak current vs. pulse
duration – HER, Orange. Figure 6. Maximum tolerable peak current vs.
pulse duration – Green.
RATIO OF MAXIMUM OPERATING
PEAK CURRENT TO TEMPERATURE
DERATED DC CURRENT
I PEAK
F
I MAX
DC
t – PULSE DURATION – µs
P
10
1
100
10 1000010001001
10 KHz
3 KHz
300 Hz
DC OPERATION
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
DERATING OF I
MAXIMUM
DC
100 Hz
1 KHz
RATIO OF MAXIMUM OPERATING
PEAK CURRENT TO TEMPERATURE
DERATED DC CURRENT
I PEAK
F
I MAX
DC
t – PULSE DURATION – µs
P
10
1
100
10 1000010001001
10 KHz
3 KHz
300 Hz
100 Hz
DC OPERATION
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
DERATING OF I
MAXIMUM
DC
1 Hz
11
Intensity Bin Limits (mcd)
AlGaAs Red Orange
HDSP-A41X
IV Bin Category Min Max
A0.284 0.433
B0.354 0.541
C0.443 0.677
D0.554 0.846
E0.692 1.057
F0.856 1.322
G1.082 1.652
H1.352 2.066
I1.692 2.581
J2.114 3.227
K2.641 4.034
L3.300 5.042
M4.127 6.303
N5.157 7.878
HDSP-F41X/G41X
IV Bin Category Min Max
C0.485 0.890
D0.728 1.333
E1.091 2.000
F1.636 3.000
G2.454 4.500
H3.682 6.751
HDSP-H41X/K41X
IV Bin Category Min Max
B0.77 1.17
C0.95 1.45
D1.19 1.82
E1.49 2.27
F1.85 2.89
G2.32 3.54
H2.90 4.43
HDSP-A1xx
IV Bin Category Min. Max.
E0.315 0.520
F0.428 0.759
G0.621 1.16
H0.945 1.71
I1.40 2.56
J2.10 3.84
K3.14 5.75
L4.70 8.55
HDSP-F1xx/G1xx
IV Bin Category Min. Max.
D0.391 0.650
E0.532 0.923
F0.755 1.39
G1.13 2.08
H1.70 3.14
HDSP-H1xx/K1xx
IV Bin Category Min. Max.
C0.415 0.690
D0.565 0.990
E0.810 1.50
F1.20 2.20
G1.80 3.30
H2.73 5.00
I4.09 7.50
12
HDSP-A2xx
IV Bin Category Min. Max.
B0.342 0.630
C0.516 0.946
D0.774 1.418
E1.160 2.127
F1.740 3.190
G2.610 4.785
H3.915 7.177
HDSP-F2xx/G2xx
IV Bin Category Min. Max.
C0.485 0.890
D0.728 1.333
E1.091 2.000
F1.636 3.000
G2.454 4.500
H3.682 6.751
HDSP-H2xx/K2xx
IV Bin Category Min. Max.
E0.91 1.67
F1.37 2.51
G2.05 3.76
H3.08 5.64
I4.62 8.64
J6.93 12.70
K10.39 19.04
Intensity Bin Limits (mcd), continued
HER
13
Contrast Enhancement
For information on contrast
enhancement, please see
Application Note 1015.
Soldering/Cleaning
For information on soldering
LEDs, please refer to
Application Note 1029.
Electrical/Optical
For more information on
electrical/optical characteristics,
please see Application Note
1005.
Note:
All categories are established for classification of products. Products may
not be available in all categories. Please contact your Avago
representatives for further clarification/information.
HDSP-A5xx
IV Bin Category Min. Max.
H0.86 1.58
I1.29 2.37
J1.94 3.55
K2.90 5.33
L4.37 8.01
HDSP-F5xx/G5xx
IV Bin Category Min. Max.
H1.54 2.82
I2.31 4.23
J3.46 6.34
K5.18 9.50
L7.78 14.26
HDSP-H5xx/K5xx
IV Bin Category Min. Max.
E0.91 1.67
F1.37 2.51
G2.05 3.76
H3.08 5.64
I4.61 8.46
Intensity Bin Limits (mcd), continued
Green
Color Categories
Dominant Wavelength (nm)
Color Bin Min. Max.
Green 2 573.00 577.00
3570.00 574.00
4567.00 571.00
5564.00 568.00
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries.
Data subject to change. Copyright © 2006 Avago Technologies Pte. All rights reserved. Obsoletes 5988-4433EN
5989-2795EN April 10, 2006
