Thermoelectrically cooled type
Easy-to-use detector modules with built-in preamps
Infrared detector modules with preamps
www.hamamatsu.com
Infrared detector modules operate just by connecting to a DC power supply. The detector element is selectable from among
InGaAs, PbS, PbSe, MCT and InSb, which are all combined with a thermoelectric cooler. The P4631-10 using an MCT
detector is especially suited for CO2 laser detection. We welcome requests for custom devices that suit your application.
Infrared detection
Cable (for DC power supply) A4372-02:
2 m (connector installed at one end)
CO2 laser detection
Instruction manual
High S/N
Compact size
Features Applications
Accessories
1
Easy to use
Operates just by connecting to DC power supply
Circuit design optimized for detector characteristics
Built-in thermoelectric cooling control circuit
(fixed controltemperature)
Structure / Absolute maximum ratings
Type no. Detector
element
Photosensitive
area
Rated supply voltage
Absolute maximum ratings
Incident
light level
max.
Supply voltage
Operating
temperature
Topr
Storage
temperature
Tstg
(mm) (V) (μW) (V) (°C) (°C)
G6122
InGaAs (G12182-210K)
φ1
Vc=±15 ± 0.5
Vp1=+2.5
+1
-0.05
0.06
Vc=±18
Vp1=+5
0 to +40 -20 to +50
G6122-03
InGaAs (G12183-210K)
φ10.07
G6126 InGaAs (G8605-25) φ50.2
P4638 PbS (P2682-01) 4 × 5 0.25
P4639 PbSe (P9696-203) 3 × 3 100
P4631-03 InSb (P6606-310) 1 × 1
Vp2=+4.5 ± 0.25
67 Vp2=+7
P4631-10 MCT (P3257-31) 1 × 1
Vp1=+2.5
+1
-0.05
5 (W) Vp1=+5
Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the
product within the absolute maximum ratings.
Infrared detector modules with preamps
Thermoelectrically cooled type
2
Electrical and optical characteristics (Typ. Ta=25 °C, unless otherwise noted)
Type no.
Element
temperature
at rated input
voltage
Td
P
eak
sensitivity
wavelength
λp
Cutoff
wavelength
λc
Photo-
sensitivity
S
λ=λp
*1
Noise
equivalent
power
NEP
λ=λp
Frequency
response
-3 dB
Output
impedance
Maximum
output
voltage
RL=1 kΩ
Current
consumption
typ.
Current
consumption*2
max.
(mA)
(°C) (μm) (μm) (V/W) (W/Hz1/2) (Hz) (
Ω
)(V) (mA)
+Vc, -Vc
Vp1 or Vp2
G6122
-15
1.95 2.05 1.7 × 1081 × 10-13 DC to 2.2 k
50
+10
500
+60, -30
+1100
G6122-03 2.3 2.56 1.5 × 1086 × 10-13 DC to 3 k
G6126 1.55 1.66 5 × 1077 × 10-14 DC to 1.2 k
+50, -30
P4638 2.4 3.1 8 × 1071 × 10-12 0.2 to 300 ±10
+50, -20
P4639 4.1 5.0 2 × 1051 × 10-10 0.2 to 10 k
P4631-03 -58 5.5 6.1 1.5 × 1051.5 × 10-11 DC to 100 k +10 950
+90, -30
P4631-10 -3 6.5 11.5 2*3
3.5 × 10
-7
*
3
DC to 500 k 800
+150, -30
+1400
*1: f=100 Hz (G6122, G6122-03, G6126, P4638), f=600 Hz (P4639, P4631-10), f=1.2 kHz (P4631-03)
*2: Vc=15 V, Vp1=2.5 V or Vp2=4.5 V
Recommended DC power supply (analog power supply): E3630A (Agilent Technologies)
Current capacity: More than 1.5 times the maximum current consumption
Ripple noise: 5 mVp-p or less (±15 V power supply)
5 mVp-p or less (+2.5 V, +4.5 V power supply)
*3: λ=10.6 μm
Spectral response
* (λ, 600, 1)
Wavelength (µm)
D* (λ, 1200, 1) (cm · Hz1/2/W)
16
(Typ.)
105
107
1011
1013
109
108
1012
106
1010
2345 7 128 9 10 11
P4631-10
P4639*P4631-03
P4638*
G6126
G6122
ňķIJijijĮıĴ
KIRDB0188EG
Infrared detector modules with preamps
Thermoelectrically cooled type
3
KIRDA0009EF
Dimensional outlines (unit: mm, tolerance unless otherwise noted: ±1)
G6122/-03, G6126, P4638, P4639
27.2 46.3 ± 0.3
75.2
2
26.5
12
(4 ×) M3 Depth 5
(threaded hole)
BNC connector
(signal output)
6-pin connector
(voltage input)
0.7 ± 0.4
20 ± 0.3
20 ± 0.3
75.2
3.3 ± 0.2
Photosensitive
surface
45
40
20
26 ± 0.3
26 ± 0.3
(4 ×) 3.2 Depth 14.5 (through hole)
+ M3 Depth 5 (for flat head screw)
Photosensitive area
45
45
(4 ×) M3 Depth 5
(threaded hole)
BNC connector
(signal output)
6-pin connector
(voltage input)
34 ± 0.3
(4 ×) 3.2 Depth 24.5 (through hole)
+ M3 Depth 5 (for flat head screw)
31 ± 0.377
Photosensitive area
20
38
66.5
4.6 ± 0.5
Photosensitive
surface
66
132.5
12
26.5
64.5 62 ± 0.3 2
20 ± 0.3
Offset adjustment screw
20 ± 0.3
0.2 ± 0.4
KIRDA0137ED
P4631-03
Infrared detector modules with preamps
Thermoelectrically cooled type
4
KIRDA0139JD
27.2
92
2
26.5
12
(4 ×) M3 Depth 5
(threaded hole)
BNC connector
(signal output)
6-pin connector
(voltage input)
0.7 ± 0.4
62.8 ± 0.3
20 ± 0.3
Offset voltage
adjustment screw
20 ± 0.3
92
4.85 ± 0.2
Photosensitive
surface
45
40
20
26 ± 0.3
26 ± 0.3
(4 ×) 3.2 Depth 14.5 (through hole)
+ M3 Depth 5 (for flat head screw)
Photosensitive area
P4631-10
Cable (for DC power supply) A4372-03
2000 ± 100
27
90 ± 10
10 ± 3
Solder processing
Shielded wire (6 conductors)
1
11
4.8
Connector: HR10-7P-6P
(made by Hirose Electric)
Pin connection
Pin no.
+2.5 V (or +4.5V)
Power supply for cooling controller
GND
Power supply for cooling controller
Output for temperatures monitor
+15 V
-15 V
GND
Lead color
Red
Blue
Light green
Yellow
White
Black stranded wire
+2.5 V (or +4.5V)
KIRDA0197EB
Cat. No. KIRD1036E15 Feb. 2013 DN
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Thorshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int. 6, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
China: Hamamatsu Photonics (China) Co., Ltd.: 1201 Tower B, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866
Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the
information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always
contact us for the delivery specification sheet to check the latest specifications.
T
ype numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(X)" which means preliminary specifications or
a suffix "(Z)" which means developmental specifications.
T
he product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that
one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product
use.
Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission.
Information described in this material is current as of February, 2013.
Infrared detector modules with preamps
Thermoelectrically cooled type
The G6122, G6122-03, G6126, P4638 and P4631-10
conform to European EMC directives:
EN 61326-01 Class B.
The infrared detector modules (TE-cooled type) do not operate if not cooled. Always supply +2.5 V or +4.5 V to cool the
detector element.
Handling precaution
5
