Infrared detector modules with preamps Thermoelectrically cooled type Easy-to-use detector modules with built-in preamps Infrared detector modules operate just by connecting to a DC power supply. The detector element is selectable from among InGaAs, PbS, PbSe, MCT and InSb, which are all combined with a thermoelectric cooler. The P4631-10 using an MCT detector is especially suited for CO2 laser detection. We welcome requests for custom devices that suit your application. Features Applications High S/N Infrared detection Compact size CO2 laser detection Easy to use Operates just by connecting to DC power supply Accessories Circuit design optimized for detector characteristics Built-in thermoelectric cooling control circuit (fixed control temperature) Cable (for DC power supply) A4372-02: 2 m (connector installed at one end) Instruction manual Structure / Absolute maximum ratings Absolute maximum ratings Type no. G6122 G6122-03 G6126 P4638 P4639 P4631-03 P4631-10 Detector element InGaAs (G12182-210K) InGaAs (G12183-210K) InGaAs (G8605-25) PbS (P2682-01) PbSe (P9696-203) InSb (P6606-310) MCT (P3257-31) Photosensitive Rated supply voltage area (mm) 1 1 5 4x5 3x3 1x1 1x1 (V) Vc=15 0.5 Vp1=+2.5+1 -0.05 Vp2=+4.5 0.25 Vp1=+2.5+1 -0.05 Operating Storage Incident Supply voltage temperature temperature light level Topr Tstg max. (V) (C) (C) (W) 0.06 0.07 0.2 Vp1=+5 Vc=18 0 to +40 -20 to +50 0.25 100 67 Vp2=+7 5 (W) Vp1=+5 Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. www.hamamatsu.com 1 Infrared detector modules with preamps Thermoelectrically cooled type Electrical and optical characteristics (Typ. Ta=25 C, unless otherwise noted) Element Peak Cutoff temperature sensitivity wavelength at rated input wavelength voltage c p Td (C) (m) (m) 1.95 2.05 2.3 2.56 1.55 1.66 -15 2.4 3.1 4.1 5.0 -58 5.5 6.1 -3 6.5 11.5 Type no. G6122 G6122-03 G6126 P4638 P4639 P4631-03 P4631-10 Photosensitivity S =p *1 (V/W) 1.7 x 108 1.5 x 108 5 x 107 8 x 107 2 x 105 1.5 x 105 2*3 Noise equivalent power NEP =p (W/Hz1/2) 1 x 10-13 6 x 10-13 7 x 10-14 1 x 10-12 1 x 10-10 1.5 x 10-11 3.5 x 10-7*3 Frequency response -3 dB (Hz) DC to 2.2 k DC to 3 k DC to 1.2 k 0.2 to 300 0.2 to 10 k DC to 100 k DC to 500 k Output impedance () Maximum Current output consumption voltage typ. RL=1 k (V) (mA) 500 10 +10 (mA) +Vc, -Vc Vp1 or Vp2 +60, -30 +10 50 Current consumption*2 max. +50, -30 +1100 +50, -20 950 800 +90, -30 +150, -30 +1400 *1: f=100 Hz (G6122, G6122-03, G6126, P4638), f=600 Hz (P4639, P4631-10), f=1.2 kHz (P4631-03) *2: Vc=15 V, Vp1=2.5 V or Vp2=4.5 V Recommended DC power supply (analog power supply): E3630A (Agilent Technologies) Current capacity: More than 1.5 times the maximum current consumption Ripple noise: 5 mVp-p or less (15 V power supply) 5 mVp-p or less (+2.5 V, +4.5 V power supply) *3: =10.6 m Spectral response (Typ.) 1013 G6126 D* (, 1200, 1) (cm * Hz1/2/W) 1012 P4638* G6122 1011 i 10 10 9 10 P4639* 108 P4631-03 P4631-10 107 106 5 10 1 2 3 * (, 600, 1) 4 5 6 7 8 9 10 11 12 Wavelength (m) KIRDB0188EG 2 Infrared detector modules with preamps Thermoelectrically cooled type Dimensional outlines (unit: mm, tolerance unless otherwise noted: 1) G6122/-03, G6126, P4638, P4639 (4 x) 3.2 Depth 14.5 (through hole) + M3 Depth 5 (for flat head screw) 26 0.3 20 45 Photosensitive area 3.3 0.2 Photosensitive surface 75.2 26 0.3 40 (4 x) M3 Depth 5 (threaded hole) 27.2 46.3 0.3 2 26.5 12 20 0.3 20 0.3 BNC connector (signal output) 6-pin connector (voltage input) 75.2 0.7 0.4 KIRDA0009EF P4631-03 (4 x) 3.2 Depth 24.5 (through hole) + M3 Depth 5 (for flat head screw) 4.6 0.5 20 Photosensitive surface 3 45 34 0.3 8 Photosensitive area 66.5 7 66 0.2 0.4 132.5 64.5 2 62 0.3 (4 x) M3 Depth 5 (threaded hole) 26.5 BNC connector (signal output) 12 45 20 0.3 31 0.3 20 0.3 7 6-pin connector (voltage input) Offset adjustment screw KIRDA0137ED 3 Infrared detector modules with preamps Thermoelectrically cooled type P4631-10 (4 x) 3.2 Depth 14.5 (through hole) + M3 Depth 5 (for flat head screw) 26 0.3 4.85 0.2 Photosensitive surface 92 26 0.3 40 (4 x) M3 Depth 5 (threaded hole) 62.8 0.3 27.2 2 6-pin connector (voltage input) 92 0.7 0.4 26.5 12 20 0.3 20 0.3 BNC connector (signal output) Offset voltage adjustment screw KIRDA0139JD Cable (for DC power supply) A4372-03 2000 100 27 11 4.8 10 3 90 10 1 20 45 Photosensitive area Shielded wire (6 conductors) +2.5 V (or +4.5V) Connector: HR10-7P-6P (made by Hirose Electric) Solder processing Pin no. Pin connection Lead color +2.5 V (or +4.5V) Red Power supply for cooling controller GND Blue Power supply for cooling controller Output for temperatures monitor Light green +15 V Yellow -15 V White GND Black stranded wire KIRDA0197EB 4 Infrared detector modules with preamps Thermoelectrically cooled type Handling precaution The infrared detector modules (TE-cooled type) do not operate if not cooled. Always supply +2.5 V or +4.5 V to cool the detector element. The G6122, G6122-03, G6126, P4638 and P4631-10 conform to European EMC directives: EN 61326-01 Class B. Information described in this material is current as of February, 2013. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. Type numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(X)" which means preliminary specifications or a suffix "(Z)" which means developmental specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Thorshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int. 6, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 China: Hamamatsu Photonics (China) Co., Ltd.: 1201 Tower B, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866 Cat. No. KIRD1036E15 Feb. 2013 DN 5