a~í~=pÜÉÉía~í~=pÜÉÉí
¤TDK Electronics AG 2018. Reproduction, publication and dissemination of this publication, enclosures hereto
and the information contained therein without TDK Electronics’ prior express consent is prohibited.
Power line chokes
Current-compensated frame core double chokes
300 V AC, 0.7 … 2.3 A, 10 … 100 mH, +40 °C
Series/Type: B82733F/V
Date: November 2018
211/18
Please read Cautions and warnings and
Important notes at the end of this document.
Rated voltage 300 V AC
Rated inductance 10 ... 100 mH
Rated current 0.7 ... 2.3 A / +40 °C
Construction
■Current-compensated frame double chokes
■Closed magnetic circuit with frame construction
made of ferrite
■Epoxy coating (UL94 V-0)
■Plastic coil former (UL94 V-0)
■2-section winding
■Sector winding
■Clearance and creepage distances >4 mm
Features
■High inductance with low resistance
■Approx. 2% stray inductance for symmetrical
■interference suppression
■High pulse-handling capability
■Very good inductance/rated current ratio
■Low height (14 mm, B82733F)
■Suitable for wave soldering
■Design complies with EN 60938-2 (VDE 0565-2) and UL 1283
■ENEC (VDE) and UL approval
■RoHS-compatible
Applications
■Suppression of common-mode and differential-mode interferences
■Electronic ballasts for lamps
■Switch-mode power applications
Terminals
■Base material CP wire
■Hot dipped
■Pins 0.7 u 0.7 mm
■Lead spacing:
B82733F: 20 u 22.5 mm
B82733V: 10 u 18.75 mm
Marking
Product brand, date of manufacture (YYWWD), production place identification code,
ordering code, approval signs
Delivery mode
Polystyrene tray, anti-static, in cardboard box
B82733F/VPower line chokes
Current-compensated frame core double chokes
311/18
Please read Cautions and warnings and
Important notes at the end of this document.
Dimensional drawing and layout recommendation
B82733F (horizontal version)
B82733V (vertical version)
B82733F/VPower line chokes
Current-compensated frame core double chokes
411/18
Please read Cautions and warnings and
Important notes at the end of this document.
Technical data and measuring conditions
Rated voltage VR300 V AC (50/60 Hz)
Test voltage Vtest 2000 V AC, 2 s (line/line)
Rated temperature TR+40 qC
Rated current IRReferred to 50 Hz and rated temperature
Rated inductance LRMeasured with Agilent 4284A at 10 kHz, 0.1 mA, +20 °C.
Inductance is specified per winding.
Inductance tolerance –30/+50% at +20 °C
Inductance decrease'L/L0<10% at DC magnetic bias with IR, +20 °C
Stray inductance Lstray,typ Measured with Agilent 4284A at 10 kHz, 5 mA, +20 °C,
typical values
DC resistance Rtyp Measured at +20 °C; typical values, specified per winding
Solderability (lead-free) Sn96.5Ag3.0Cu0.5: +(245 r5) °C, (3 r0.3) s
Wetting of soldering area t95%
(to IEC 60068-2-20, test Ta)
Resistance to soldering heat
(wave soldering)
+(260 r5) °C, (10 r1) s
(to IEC 60068-2-20, test Tb)
Climatic category 40/125/56 (to IEC 60068-1)
Pollution degree P2 (to IEC 61558-1)
Storage conditions (packaged) –25 °C … +40 °C, d75% RH
Weight Approx. 18 g
Approvals EN 60938-2, UL 1283
B82733F/VPower line chokes
Current-compensated frame core double chokesC
511/18
Please read Cautions and warnings and
Important notes at the end of this document.
B82733F/VPower line chokes
Characteristics and ordering codes
u = approval granted
IR
A
LR
mH
Lstray,typ
PH
Rtyp
m:
Ordering code
horizontal vertical
Approvals
0.7 100 2100 1810 B82733F2701B001 B82733V2701B001 uu
0.9 68 1440 1100 B82733F2901B001 B82733V2901B001 uu
1.1 47 970 804 B82733F2112B001 B82733V2112B001 uu
1.2 39 800 696 B82733F2122B001 B82733V2122B001 uu
1.4 27 550 440 B82733F2142B001 B82733V2142B001 uu
1.9 15 310 279 B82733F2192B001 B82733V2192B001 uu
2.3 10 210 188 B82733F2232B001 B82733V2232B001 uu
Impedance |Z| versus frequency f
measured with windings in parallel at +20 °C,
typical values
Current derating Iop/IR
versus ambient temperature TA
Current-compensated frame core double chokes
611/18
Cautions and warnings
■Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
■The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Display of ordering codes for TDK Electronics products
The ordering code for one and the same product can be represented differently in data sheets, data
books, other publications, on the company website, or in order-related documents such as shipping
notes, order confirmations and product labels. The varying representations of the ordering
codes are due to different processes employed and do not affect the specifications of the
respective products. Detailed information can be found on the Internet under
www.tdk-electronics.tdk.com/orderingcodes.
Please read Cautions and warnings and
Important notes at the end of this document.
711/18
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, we are either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether a product with the properties described in the product
specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of an electronic component could endanger human life or health (e.g.
in accident prevention or life-saving systems), it must therefore be ensured by means of suitable
design of the customer application or other action taken by the customer (e.g. installation of
protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have
any more detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to our General Terms
and Conditions of Supply.
7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard.
The IATF certifications confirm our compliance with requirements regarding the quality manage-
ment system in the automotive industry. Referring to customer requirements and customer spe-
cific requirements (“CSR”) TDK always has and will continue to have the policy of respecting in-
dividual agreements. Even if IATF 16949 may appear to support the acceptance of unilateral re-
quirements, we hereby like to emphasize that only requirements mutually agreed upon can
and will be implemented in our Quality Management System. For clarification purposes we
like to point out that obligations from IATF 16949 shall only become legally binding if individually
agreed upon.
811/18
Important notes
8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP,
CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD,
MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine,
PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other
countries. Further information will be found on the Internet at
www.tdk-electronics.tdk.com/trademarks.
Release 2018-10
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
EPCOS / TDK:
B82733F2292B1 B82733F2701B001 B82733F2901B001 B82733F2112B001 B82733F2122B001
B82733F2142B001 B82733F2192B001 B82733F2232B001 B82733F2112B1 B82733F2122B1 B82733F2192B1
B82733F2701B1 B82733F2901B1 B82733F2232B1 B82733F2142B1 B82733X001 B82733V2192B1
B82733V2142B1 B82733V2112B1 B82733V2122B1 B82733V2701B1 B82733V2232B1 B82733V2901B1
B82733V2901B001 B82733V2701B001 B82733V2192B001 B82733V2232B001 B82733V2112B001
B82733V2142B001 B82733V2122B001
