Please contact us about TUV certified products. AQ-C Miniature DIL SSR 1A control type for PCBs AQ-C RELAYS FEATURES TYPICAL APPLICATIONS 1. Compact DIL type: L20 mm x W10 mm x H12.8 mm (.787x.394x.504 inch) 2. Excellent in noise resistance 3. Snubber circuit integrated 4. High dielectric strength: 2,500 V between input and output 5. Reverse polarity type available 1. Compact AC motor, Solenoid, Magnet, Driver of magnetic valve 2. Copying equipment 3. NC machine, Robot 4. Programmable controller 5. Air conditioners RoHS compliant ORDERING INFORMATION AQC Load current Nil: Input module 1A: Output module Load voltage 1: 75 to 125 V AC (Output module) 2: 75 to 250 V AC (Output module) D1: 3 to 60 V DC (Output module) D3: 4 to 32 V DC (Input module) Type Nil: DC output IM: Input module T: AC output Random ZT: AC output Zero-cross Input voltage Output module: 5, 12, 24 V DC Input module: 4/24 V DC, 100/240 V AC Input polarity Nil: Standard polarity R: Reverse polarity (Only for output module) TYPES 1. Input module Type AC input DC input Output voltage 4 to 32 V DC 4 to 32 V DC Input voltage 80 to 250 V AC 3 to 32 V DC Part No. AQCD3-IM 100/240 V AC AQCD3-IM 4/24 V DC Standard packing: Carton: 50 pcs.; Case: 500 pcs. ASCTB214E 201201-T1 Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ AQ-C 2. Output module Type Load voltage Input voltage 5 V DC 12 V DC 24 V DC 5 V DC 12 V DC 24 V DC 5 V DC 12 V DC 24 V DC 5 V DC 12 V DC 24 V DC 5 V DC 12 V DC 24 V DC 75 to 125 V AC AC output Zero-cross 75 to 250 V AC 75 to 125 V AC AC output Random 75 to 250 V AC DC output 3 to 60 V DC Part No. AQC1A1 - ZT5 V DC AQC1A1 - ZT12 V DC AQC1A1 - ZT24 V DC AQC1A2 - ZT5 V DC AQC1A2 - ZT12 V DC AQC1A2 - ZT24 V DC AQC1A1 - T 5 V DC AQC1A1 - T 12 V DC AQC1A1 - T 24 V DC AQC1A2 - T 5 V DC AQC1A2 - T 12 V DC AQC1A2 - T 24 V DC AQC1AD1- 5 V DC AQC1AD1- 12 V DC AQC1AD1- 24 V DC Standard packing: Carton: 50 pcs.; Case: 500 pcs. Note: Reverse polarity type (AQC5 and AQC6) is also produced by lot after receipt of order. RATING 1. Rating [Ambient temperature: 20C 68F; Input voltage ripple (output module) and output voltage ripple (input module): 1% or less] 1) Input module Type Item Input side Output side Input voltage Input current Pick-up voltage Drop-out voltage Load voltage Load current Max. "OFF-state" leakage current Max. "ON-state" voltage drop AC input AQCD3-IM 100/240 V AC 80 to 250 V AC Max. 5 mA Max. 80 V AC Min. 10 V AC 4 to 32 V DC 0.1 to 25 mA Max. 5A Max. 1.6 V DC input AQCD3-IM 4/24 V DC 3 to 32 V DC Max. 5 mA Max. 3 V DC Min. 1 V DC 4 to 32 V DC 0.1 to 25 mA Max. 5A Max. 1.6 V Remarks When 32 V DC applied at max. carrying current 2) Output module (1) AC output type Type Item Input voltage Input side Load side Input impedance (Approx.) Drop-out voltage, min Max. load current Load voltage Non-repetitive surge current Max. "OFF-state" leakage current Max. "ON-state" voltage drop Min. load current AQC1A1ZT5VDC AQC1A1T5VDC AQC1A1ZT12VDC AQC1A1T12VDC AQC1A1ZT24VDC AQC1A1T24VDC AQC1A2ZT5VDC AQC1A2T5VDC AQC1A2ZT12VDC AQC1A2T12VDC AQC1A2ZT24VDC AQC1A2T24VDC (5 V type) 4 to 6 V DC 0.3 k 0.5 V (12 V type) 9.6 to 14.4 V DC 0.8 k 1.2 V (24 V type) 21.6 to 26.4 V DC 1.8 k 2.4 V (5 V type) 4 to 6 V DC 0.3 k 0.5 V (12 V type) 9.6 to 14.4 V DC 0.8 k 1.2 V (24 V type) 21.6 to 26.4 V DC 1.8 k 2.4 V Remarks *1 Ta = Max. 40C 104F 1 A*2 75 to 125 V AC 75 to 250 V AC 20 A*3 0.6 m A (When 100 V AC applied) 1.1 m A (When 200 V AC applied) 1.6 V 10 mA*4 In one cycle at 60 Hz at 60 Hz at max. carrying current 20 mA*4 (2) DC output type Type Item Input voltage Input side Load side Input impedance (Approx.) Drop-out voltage, min Max. load current Load voltage Non-repetitive surge current Max. "OFF-state" leakage current Max. "ON-state" voltage drop Min. load current Notes: *1. *2. *3. *4. AQC1AD1-5VDC AQC1AD1-12VDC AQC1AD1-24VDC (5 V type) 4 to 6 V DC 0.43 k (12 V type) 9.6 to 14.4 V DC 1.2 k 0.8 V (24 V type) 21.6 to 26.4 V DC 2.8 k 1 A*2 3 to 60 V DC 1.5 A*3 0.1 m A (When 60 V DC applied) 1.6 V 1 mA*4 Remarks *1 Ta = Max. 40C 104F at 1s at max. carrying current Refer to REFERENCE DATA "3. Input current vs. input voltage characteristics". Refer to REFERENCE DATA "1. Load current vs. ambient temperature". Refer to REFERENCE DATA "2. Non-repetitive surge current vs. carrying time". When the load current is less than the rated minimum load current, please refer to "Cautions for Use of SSR". Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB214E 201201-T1 AQ-C 2. Characteristics [Ambient temperature: 20C 68F; Input voltage ripple (output module) and output voltage ripple (input module): 1% or less] 1) Input module Type AC Input module Item Operate time, max. Release time, max DC Input module Remarks 20 ms 0.5 ms 20 ms 0.5 ms Input voltage: 24 V DC or 100V AC Output voltage: 24 V DC Output current: 25mA at 500 V DC For 1 minute 109 between input and output 2,500 Vrms between input and output Insulation resistance, min. Breakdown voltage Destructive Functional Vibration resistance 10 to 55Hz double amplitude of 3 mm 10 to 55Hz double amplitude of 3 mm Min. 980 m/s2 {100 G} Min. 980 m/s2 {100 G} -30C to +80C -22F to +176F -30C to +100C -22F to +212F Destructive Functional Ambient temperature Storage temperature Shock resistance 1 hour for X,Y, Z, axis 10 minutes for X,Y, Z, axis 5 time each for X,Y,Z axis 4 time each for X,Y,Z axis 2) Output module AC output Type Item Random Zero-cross 1 ms 1/2 cycle of voltage sine wave + 1ms 1/2 cycle of voltage sine wave + 1ms 109 between input and output 2,500 Vrms between input and output Operate time, max. Release time, max. Insulation resistance, min. Breakdown voltage Destructive Functional Vibration resistance DC output Remarks 0.5 ms 1 ms at 500 V DC For 1 minute 10 to 55Hz double amplitude of 3 mm 10 to 55Hz double amplitude of 3 mm Min. 980 m/s2 {100 G} Min. 980 m/s2 {100 G} -30C to +80C -22F to +176F -30C to +100C -22F to +212F Destructive Functional Ambient temperature Storage temperature Shock resistance Random Turn-ON, Zero-cross (Turn-OFF) Operational method 1 hour for X,Y, Z, axis 10 minutes for X,Y, Z, axis 5 time each for X,Y,Z axis 4 time each for X,Y,Z axis Zero-cross (Turn-ON and Turn-OFF) -- REFERENCE DATA 2.-(2) Non-repetitive surge current vs. carrying time characteristics (AC/DC output) Use load current within range specified in the figure below (AC output) (DC output) Load current, A 1.0 0.8 0.6 0.4 Non-repetitive surge current, A 2.-(1) Non-repetitive surge current vs. carrying time characteristics Non-repetitive surge current, A 1. Load current vs. ambient temperature characteristics 30 20 10 0.2 0 0 20 40 60 80 Ambient temperature, C 3. Input current vs. input voltage characteristics (AC/DC output) 3 2 1 2 0 10 3 4 5 7 10 20 30 40 50 70 100 No. of cycles at 60 Hz 4.-(2) Input current vs. input voltage characteristics (AC input) (DC input) 10 10 AC output DC output 15 8 Input current, mA 20 1,000 9 Input current, mA 25 20 30 4050 70 100 200 300 Carrying time, ms 4.-(1) Input current vs. input voltage characteristics 30 Input current, mA 4 1 0 -30 6 4 10 5 5 8 7 6 5 4 3 (5 V type) (12 V type) (24 V type) 2 2 1 0 0 10 20 Input voltage, V ASCTB214E 201201-T1 30 Panasonic Corporation 0 100 200 Input voltage, V AC 300 Automation Controls Business Unit 0 5 10 15 20 25 30 Input voltage, V DC industrial.panasonic.com/ac/e/ 35 AQ-C 5. Load current vs. ambient temperature characteristics for adjacent mounting (AC/DC output) Load current, A 1.0 =20.32 mm .800 inch =12.7 mm .500 inch 0.8 0.6 0.4 0.2 =Adjacent mounting pitch 0 -30 0 20 40 60 80 Ambient temperature, C DIMENSIONS (mm inch) The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ 1. Input module (AC, DC) External dimensions CAD Data PC board pattern (Copper-side view) 10.16 .400 10 .394 2.7 .106 7.62 .300 2.7 .106 12.5 .492 5.5 .217 0.3 .012 7.62 .300 Terminal 1 0.3 .012 0.8 .031 0.3 .012 0.4 .016 Terminal 8 Terminal 16 Tolerance: 0.1 .004 3.9 .154 0.8 .031 20 .787 0.3 .012 4-1.1 dia. 4-.043 dia. Terminal 5 Schematic 0.3 .012 0.4 .016 (+) 16 AC input 5... Output: DC - 8... Output: DC + r... Input: AC 1... Input: AC Case color: Yellow DC input 5... Output: DC - 8... Output: DC + r... Input: DC + 1... Input: DC - Case color: White 10.16 .400 7.62 .300 7.62 .300 1 Input power source 1 8 5 8 5 (-) Load r + - General tolerance: 0.5 .020 Specified polarities for DC types are shown in the parentheses. Load power source 2. Output module (AC, DC) External dimensions CAD Data PC board pattern (Copper-side view) 10.16 .400 10 .394 2.7 .106 7.62 .300 2.7 .106 12.5 .492 5.5 .217 0.3 .012 0.3 .012 0.8 .031 0.3 .012 0.4 .016 Terminal 8 Terminal 16 Tolerance: 0.1 .004 3.9 .154 0.8 .031 20 .787 0.3 .012 DC output 5... Output: DC - 8... Output: DC + r... Input: DC + 1... Input: DC - Case color: Red 10.16 .400 Schematic 0.3 .012 0.4 .016 7.62 .300 1 7.62 .300 5 8 16 Panasonic Corporation 8 5 Automation Controls Business Unit + - Input power source Load r General tolerance: 0.5 .020 4-1.1 dia. 4-.043 dia. Terminal 5 1 AC output 5... Output: AC 8... Output: AC r... Input: DC + 1... Input: DC - Case color: Black 7.62 .300 Terminal 1 (+) (-) Load power source industrial.panasonic.com/ac/e/ Specified polarities for DC types are shown in the parentheses. ASCTB214E 201201-T1 AQ-C ACCESSORY Socket PC1A-PS NOTES When used for the load less than rated In the case of the load current less than rated, malfunction may result from the residual voltage across the both ends of the load even if the solid state relay is turned off. Use a dummy resistor as a countermeasure. The total of the current through the resistor and the load current must exceed the min. rated load current. R0 (Dummy resistor) (+) Load In case the dummy resistor is not used, keep in mind that the residual voltage becomes as follows: Example: For the inductive load by the 5 mA load current and the 200 V AC load voltage, the load impedance becomes 40 k and Ve/V = 16% is estimated from the below graph. Accordingly, the 32 V voltage remains across the both ends of the load when the solid state relay is turned off. 8 * Characteristics of residual voltage vs. load impedance (AC output) 100 80 1 60 Ve x100,% V Load SSR 2 V Ve 40 20 0 Load power source f = 60 Hz Ve: Residual voltage V: Power voltage 20 40 Power factor: 1 (resistive load) Power factor: 0.4 (inductive load) 60 80 100 Load impedance, k (-) 5 1 16 Input power source - + For Cautions for Use. ASCTB214E 201201-T1 Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Panasonic: AQC1A2-T24VDC-R AQC1A2-ZT12VDC-R