CARLINGSWITCH V-Series CONTURA II & III CONTURA X CONTURA XI The V-Series CONTURA rocker switches offer countless unique options including choices for ratings, colors, illuminations and symbols. These switches feature removable actuators in a choice of actuator styles and colors, are available in single or double pole configurations, and can be illuminated with either square or bar shaped lenses. An optional plug-in terminal connector enables pre- wiring of wire harness. All CONTURA switches, with sealed front panel components, are certified to IP66 and IP68, signifying complete protection against dust and prolonged spray and submersion under pressure, and are recognized to UL1500 - Ignition Protection for Marine Products. These switches are vibration, shock, thermo- shock, moisture and salt spray resistant. The CONTURA II and III actuators are available with optional soft-touch surfaces, optional lock-on terminal connector, and actuator removal tools. The CONTURA X and XI versions are available with one-piece bar lenses, or square lenses in either one or two part construction with back-lit legends, for increased durability of lens symbols. In addition, the CONTURA X and XI actuators also fit on the CONTURA II and CONTURA III base. Thus, actuators and square lenses may be purchased and stocked separately from the base assembly. The CONTURA X and XI versions include a raised bracket/bezel which helps prevent inadvertent actuation of the rocker. A-25-15 CONTURA Rocker Switches Specifications * Certifications*: UL, CSA, VDE, DEMKO, SEMKO, NEMKO, FIMKO, BEAB * Dielectric Strength: 2,000 V RMS opposite polarity; 4,000 V RMS between live parts & operator accessible surface. * Insulation Resistance: 50 Megohms * Function: SPST, DPST, SPDT, DPDT, SP8T. other circuits available, consult factory. * Operation: Two & three positions - maintained & momentary * Lighted: incandescent rated 10,000 hours; Neon rated 25,000 hours; LED rated 100,000 hours 1/2 life (LED is internally ballasted for voltages to 24VDC. * Seals: available with internal seal & optional external gasket panel seal. * Mounting: Snap-in mounting with flexible mounting wings suitable for panel thickness ranges of 0.30 tp 0.187 (0.76mm to 4.75 mm). Mounting hole dimensions are 1.450 by 0.830 (36.83 x 21.08mm). Base Material: Polyester * Actuator Material: CONTURA II and III: Underlay/Lens: Polycarbonate Hard overlay: Type 66 Nylon Soft overlay: Thermoplastic elastomer CONTURA X and XI: Nylon Lens Material: Polycarbonate * Bracket/Bezel Material: Type 66 Nylon * Temperature Ratings: -40C to 85C CONTURA switches are designed and tested in accordance with requirements of specification MILSTD 202F as follows: *Vibration: Method 204D, Test Condition A 0.06 DA or 10Gs. 10-500 Hz. Tested with VCH connector. Test criteria - No loss of circuit during test and pre and post test contact resistance. *Shock: Method 213B, Test Condition K@ 30 Gs. Tested with VCH connector. Test criteria - No loss of circuit during test and pre and post test contact resistance. *Salt Spray: Method 101D, Test Cond. A, 48 Hrs. Sealed Version only. *Thermal Shock: Method 107F, Test Cond. A, -55 to + 85C. Test Criteria - pre and post contact resistance. Moisture Resistance: Method 106E. Test criteria - pre and post test contact resistance. * Due to ongoing technological advances, consult factory far certification specifics. ObF MB 1920506 0001225 0b4 mw Carlingswitch,Inc. (860) 793-9281 Carlingswitch, LTD. Int + 44 1392-364422 Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277CARLINGSWITCH Dimensional Specifications: in. [mm] CONTURA X STYLE SHOWN WITH RAISED BRACKET AND BAR LENS - - ~ = 960[24.38] ' .780[19.81] ~~ = 1.910[48.54] 350[8.89] I i ' .250(6.38] X 031.78] =r | 39019-90) m= 1.370[34.79] = | .820[20.82] 8 7 1 4 2 5 3 6 BOTTOM VIEW TERMINAL ARRANGEMENT CONTURA XI STYLE SHOWN WITH RAISED BRACKET AND TWO SQUARE LENSES = = 960[24.38] ma 1,910[48.51) <> - .780[19.81] | i ae a y y | .350[8.89] ! - 390[9.90] =~ = 820/20.82] m 1870[34.79] 8 7 1 4 2 5 3 6 BOTTOM VIEW TERMINAL ARRANGEMENT D GbF Mi 1920506 000122? 937 Carlingswitch,Inc. (860) 793-9281 Carlingswitch, LTD. Int + 44 1392-364422 Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 CONTURA Rocker Switches 667[16.94] A I 1.586(40.28] -426[10.8: A I 1.586[40.2 7CARLINGSWITCH CONTURA Rocker Switches Circuit Diagrams circuit | CIRCUIT DIAGRAM circuit; CIRCUIT DIAGRAM circuit | CIRCUIT DIAGRAM circuit | CIRCUIT DIAGRAM LP 819 Lp 661818 illo: oO 6 Of O c |jor/ A/o L Or FO ) 9 9 9 9 9 9 9 T T I { t f I T [ I | I [ I 2 2 2 5 2 5 | 3 i | 3 | i) Ft Ff | fF 4 ot 3 ott 8 of 6 4 o TL 6 2 11I0\*4: O 7 orf Oo pd jios/ fo H |Jov7: Wo 9 9 9 9 9 9 9 9 T I I I I I ] T I I | { | | 2 2 2 2 5 | 3 l || 3 | #4 F, , fF ot 6 of o of ae oo fe 3 |lOv/: Oo 8 ||OWlW: O F |lOv/ w/O ec ||joW: WoO 9 9 ) 9 9 9 9 ; 9 I I T I I I I T I T | | J | 2 2 2 5 2 5 je 3 8, 134 8 , oh = rr ers ob ba Be Su a }lo \ O ajlo\l: fo J oy fo mM |IOM-A' WO 9 9 9 9 9 9 9 9 I T T T T T ] I I | I ] T T 1 2 2 5 2 5 5 je _ 3 4 134 8 134 4 og 6 an -, po oo be Lo oto } ' ' i! ' ' 5 110% O B |lO\-k: \4O K Of fo E |\low<vWo 9 9 9 ) 9 ; 9 9 ; 9 1 I l 1 I | I 1 | I ! | I | ft 2 2 5 2 5 2 5 SYMBOL LEGEND SYM DEFINITION DESIGNATES TERMINALS AND CONTACTS O DESIGNATES LAMP LOCATION O-0O] DESIGNATES MAINTAINED CIRCUITS ---{ DESIGNATES OTHER POSITION Q-.o} DESIGNATES MOMENTARY CIRGUITS <> } DESIGNATES TWO POSITION CONNECTION ____| DESIGNATES EXTERNAL JUMPER PROVIDED BY CUSTOMER D OBF Mf 1920506 0001228 473 x= = _______ 8 Carlingswitch,Inc. (860) 793-9281 Carlingswitch, LTD. Int + 44 1392-364422 Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277CARLINGSWITCH Lamp Circuits CONTURA Rocker Switches cna | CIRCUIT DIAGRAM taut, | CIRCUIT DIAGRAM dat, | CIRCUIT DIAGRAM tai; | CIRCUIT DIAGRAM +8 +8 4643-6 36 Aft F/6 L/g ISPECIAL : #3 T 7 43 48 +3 +3 -6 L | 1 t | B/2 G/7 M/R ISPECIAL ? ; #4 T T -7 -7 3 ie cis @ HZ | |@ , @ N/T T T 7 -7 i148 fs +6 D/4 } 6 J/8 b e P/V q T -7 7 +1 18 +8 +6 +3 +6 td) E/5 @ KAW 6 : 6 ISPECIAL #1 T T t , 7 (-)7 -7 SYMBOL LEGEND SYM DEFINITION DESIGNATES TERMINALS AND CONTACTS OTHER CIRCUITS AVAILABLE. oO DESIGNATES LAMP LOCATION CONSULT FACTORY. Carlingswitch,Inc. (860) 793-9281* Carlingswitch, LTD. Int + 44 1392-364422 * Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 D ObF MM 1920506 0001225 70T a 9CARLINGSWITCH CONTURA X & XI Rocker Switches B 6 0 B - 1 snes L ILLUMINATION & SWITCH SEALING Lamp #1 located above terminals 1 & 4 end of switch. 2 CIRCUIT Lamp #2 located above terminals 3 & 6 end of switch. Positive (+) and negative (-) symbols apply to LED lamps only. Terminal Connections as viewed from bottom of switch: 8- -7 ACTUATOR LENS LAMP 1- -4 POSITION WHEN WIRED TO 9. -5 SEALED UNSEALED LAMPS ILLUMINATED TERMINALS 3- -6 Ss. -e None A 1 . #1 Independent. 8+ o7- SP - single pole - uses terminals 1, 2 & 3. Boo SB ER Down 0 BR DP - double pole uses terminals 1, 2, 3, 4,5 & 6. Cc 3 #2 Up 2. 8+ 7 Terminals 7 & 8 for lamp circuit only. DD: oe ae ae Position: 1 2 3 Ez 2&3 CONNECTED 1&2 Dp SP DP 5&6 TERMINALS 4&5 F 6 #1 Independent 8+ T- 1A ON NONE OFF and#2 Up 3+ OG 2 B (ON) NONE OFF G q #1 Independent 8+ = 7- 3 C ON NONE (OFF) and#2 Up 3+ O7- 4D ON NONE ON. H #2 Independent 8+ 7- 5 F ON NONE (ON) Selections for Single Pole Switches Only: 6 J ON OFF > ON J 8 #1 Down 3+ 8 7 OK ON OFF (ON) and#2 Independent 6+ 7-- 8 L (ON) OFF (ON) K Ww #1 Independent 8+ 7- and #2 Independent 6+ = 7- SPECIAL CIRCUITS Selections for Double Pole Switches Only: H* 2&3 2&3,5&4 5&4 L 9 #1 Down 3+ 6- G* 283,586 2&3 OFF M R #2 Up 3+ 6 M* (2&3,5&6)2&3 OFF N T #1 Down 3+ O6- E* 5&6 5&8 5&1 and#2 Down 1+ 4- P Vv #1 Up lt 4 * Jumper between terminals 2 & 5 for circuits H, G,& M to and#2 Up 3+ 6 be specified in selection 4. External jumper between terminals 2 & 4 for circuit E are to be provided by customer 6, 7 LAMP Circuit E may be used for SP OFF-ON-ON circuit. Special circuits H, M and E not available with ratings 5 through 9. Selection 6: above terminals 1 & 4 Selection 7: above terminals 3 & 6 3 RATING USE SAME CODING FOR BOTH SELECTIONS 4 No Agoney Listiags 15A 125 VAC 1/2 HP 0 - NO LAMP THIS LOCATION 5 104 250VAC 1/2 HP, 154 125 VAC 1/2 HP 3 UL Recognized, CSA Certified ee VAC INCANDESCENT 6* 15A 125VAC 1/2 HP, 12(2)A 125 VAC T85 2 - 250VAC 5- 6V 7* 154A 125VAC 1/2 HP, 12(6)A 125 VAC T85 6-12V 8* 10A 250VAC, 15A 125VAC, 1/2 HP 125-250 VAC, 7. 18V 12(2)A 250 VAC p T85 8 -24V 9* 10A 250VAC, 15A 125VAC, 1/2 HP 125-250 VAC, 12(6)A 250 VAC T85 LED SUPERBRIGHT SUPERBRIGHT B 15A 24V RED AMBER GREEN RED Cc 20A 18V 2VDC A L F R D 20A 12V 6VDC B M G Ss G 20A 6V 12VDC Cc N H T H 20A 3V 24VDC D P J Vv * Ratings 6, 7,8 & 9 are UL, CSA, VDE, DEMKO, SEMKO, 1 PANE NEMKO, FIMKO and BEAB certified. Rating 6 & 8 available 8 BRACKET COLOR, P 1 SEAL with circuits 2, 3, 5, 6, 7, 8, B, C, F, J, K, L only. Rating 8 is RAISED BRACKET FLUSH BRACKET 1/2 HP, 250VAC only for circuits 2, 3, 5, 7, 8, K, L. Ratings 7 # OF SEALS: 0 1 & 9 available with circuits 1, 4, A, D only. Ratings 6 & 7 only BRACKET ~ ~ - available with lamp code 1 (125VAC neon). Ratings 8 & 9 only COLOR: available with lamp code 2 (250VAC neon). BLACK 1 4 B Cc WHITE 2 5 WwW Y GRAY 3 6 G H 4 TERMINATION & JUMPER TERMINATION _ JUMPER Mounting Hole Size: L450" x 0.830" 1 .250TAB (QC) NO BARRIERS NO. To mount multiple switches in single panel cut-out order optional A .250TAB (QC) WITH BARRIERS NO. interlocking mounting panels. J .250TAB (QC) NO BARRIERS YES T2 TO 5 8 eP NOTE: Base will not have terminal insulating barriers when # OF GASKETS ACCEPTABLE PANEL THICKNESS RANGE connector and/or jumpers are used. Code J is optional for .030" to .250" circuits H, G and M. Customer may provide externally wired 76mm 4.76mm jumper to connect terminals 2 and 5. 1 .030" to .109" & .147 to .157" 76mm 2.77mm 3.73mm 3.98m -2 Carlingswitch,Inc. (860) 793-9281* Carlingswitch, LTD. Int + 44 1392-364422 Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 D Ob6F MB 1920506 0001232 2T4 9 ACTUATOR CARLINGSWITCH 6 P -- Z - ? 0 - NO ACTUATOR (FURNISHED SEPARATELY) BLACK GRAY WHITE RED CONTURA X 1 2 3 4 C3 CONTURA XI 6 7 8 9 10 LENS - ABOVE LAMP #1 TERMINALS 1,4. 11 LENS - ABOVE LAMP #2 TERMINALS 3,6 0 - NO ACTUATOR Z-NO LENS CLEAR WHITE AMBER GREEN RED BLUE LENS STYLE 3 8 D J P OV BAR LENS I 4 9 E K R W ONE PIECE SQUARE LENS TWO PIECE SQUARE LENS 5 A F L Ss w/clear top protective lens* TWO PIECE SQUARE LENS w/smoke top protective lense TWO PIECE SQUARE LENS wiwhite top protective lens * ALL bottom lenses will be molded of OPAQUE material. Consult factory for other lens colors. 12 ACTUATOR LENS OR BODY LEGENDS* 00 - NO LEGEND THIS LOCATION/NO ACTUATOR [ 11 ON 1 oO O F N OFF F 12 OFF 146 4 O O N F ON F 13 | 17. OO I 0 14 0 18 O FOR ADDITIONAL LEGEND OPTIONS & CODES, SEE PAGES 19 TO 25. NOTES: Shading indicates standard configurations. Consult factory to verify horsepower rating for your particular circuit choice. 1 Custom colors are available. Consult factory. 2 Not available on Soft surface actuators. White imprinting is standard on black actuators. Black imprinting is standard on white, red and gray actuators. Custom colors are available. Consult factory. 18V bulbs recommended for 13.8 V applications for more pleasing illumination. me co above lamp 2. CONTURA X & XI Rocker Switches 00 0 00 DL 13 LEGEND ORIENTATION! Field 13 must be 0 if legend code in selection 12 is 11 - 18. 0 - NO LEGEND ACTURTOWLENG IN PANEL ORIENTATION 1 1 Position 1 2 Position 2 3 Position 3 4 Position 4 * Additional orientations and locations for legends available, consult factory. 14 ACTUATOR LENS LEGENDS! ORIENTATION 4 & | ORIENTATION 2 ORIENTATION 3 XAMPL! aFEMAN 70 MA MC 6FZ70-100 az 62Z3G-1A7 6FFMA-3MC Field 14 must be 00 if legend code in selection 12 is 11 - 18. 00 - NO LEGEND THIS LOCATION/NO ACTUATOR FOR LEGEND OPTIONS & CODES, SEE PAGES 19 TO 25. With two square lenses, use selection 12 for lens above lamp 1, and use selection 14 for lens V-Series Components: To order switch without actuator specify: V with code selections 2 through 8. (ex.) VIDABC01-00000-000 To order actuator separately, specify VV VV with code A or C only for selection 9, and codes from above scheme for selections 10 through 14. (ex.) VV6RZMA-100. To order actuator with openings for lenses and lenses separately, see page 16. Carlingswitch,Inc. (860) 793-9281 Carlingswitch, LTD. Int + 44 1892-364422 Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 D ObF @ 1920506 00013233 130 @ 13