Intelligent Condion Monitoring Box – an open development plaorm for
Condion Based Monitoring (CBM) of industrial equipment, assets and structures.
iCOMOX monitors operang condions from the surface of the equipment to
idenfy potenal faults and reduce risks associated with equipment operaon
and maintenance. This extends the lifeme of the equipment, reduces unplanned
downme, cuts maintenance costs and unlocks potenal for energy savings.
KEY FEATURES
Open embedded sensor-to-cloud plaorm
Mul-sensing: vibraon, magnec eld, temperature and sound sensors
High dynamic range and exceponal SNR for vibraon analysis
High performance acousc emission detecon
Non-invasive current sensing for motor current signature analysis
Ultra-low power consumpon with SensorStrobe™ technology
Highly reliable wireless SmartMesh™ IP 2.4GHz 802.15.4e communicaon
for tough industrial environments
Embedded SW and analycs for early detecon of machine failures in
CBM applicaons
Ability to congure warning and alarm levels and mestamp events for
each sensor
CE and FCC cered with IP66 enclosure
Very compact form factor for external and under hood mounng
Various mounng adapters to accommodate a wide range of
monitored equipment
Easy to install, use and maintain plaorm concept
iCOMOX
ARM Cortex-M4
3-axis MEMS accelerometer
3-axis magnec eld sensor
MEMS microphone
Temperature sensor
Ultra-low power accelerometer
SmartMesh IP
USB
AUX
micro-SD
2x CR2477
APPLICATION PROCESSOR
ADuCM4050 from Analog Devices
Ultra-low power ARM® Cortex®-M4F MCU
with integrated power management
SensorStrobe™ technology with 10x system-level
power savings
Memory - 512 kB of embedded ash memory
with ECC and 128 kB of congurable system
SRAM with parity
Analog peripherals - 12-bit SAR ADC, 1.8 MSPS,
8 channels
Security - hardware cryptographic accelerator
supporng AES-128, AES-256, and SHA-256
VIBRATION SENSOR
ADXL356 from Analog Devices
Low noise, low dri, low power, 3-axis MEMS
accelerometer
±10g, ±20g and ±40g ranges
5.5kHz resonant frequency with adjustable
analog output bandwidth
Excellent long-term stability from −40°C to +125°C
Integrated temperature sensor
MAGNETIC FIELD SENSOR
BMM150 from Bosch
Low power and low noise 3-axis magnec eld sensor
Extended measurement range of ±1300 µt (x-, y- axis)
and ±2500µT (z-axis) with 0.3µT resoluon
Adjustable output bandwidth >300Hz
SOUND SENSOR
IM69D130 from Inneon
High performance microphone with dual backplane
MEMS technology
105dB dynamic range and 69 dB(A) SNR
Below 1% THD at 128 dBSPL
Flat frequency response with low frequency roll o at 28Hz
TEMPERATURE SENSOR
ADT7410 from Analog Devices
±0.5°C accurate with 16-bit resoluon
−55°C to +150°C temperature range
Programmable interrupts
COMMUNICATION
LTC5800-IPM from Analog Devices
SmartMesh IP 2.4 GHz, 802.15.4e SoC as either a
wireless mote, e-manager, or access point mote in a
SmartMesh IP network
Complete radio transceiver, embedded processor, and
networking soware for forming a self-healing mesh
network
Micrium μCOS-II real me OS based On-Chip SDK
>99.999% network reliability achieved in the most
challenging RF environments
OTHER FEATURES
Ultra-low power, low-g ADXL362 from Analog Devices
for unlocking addional system-level power savings
Auxiliary port for connecng addional sensors
Oponal micro-SD card for data logging
USB to serial UART interface, USB 2.0 full speed
compable
Two LED status indicator lights
Up to 2x coin baery CR2477 for extended baery life
Operang temperature from -40 °C to 85 °C
Fundamental me-domain and FFT analysis in the
MCU per default
Advanced SW and analycs for early fault detecon
on demand
User-programmable sensor interrupts for triggering events
Cloud connecvity via an oponal SmartMesh™ IP
gateway or USB network manager
Oponal cloud apps and advanced analycs
Easy-to-use interface
58 Amal St, Kiryat Arie, POB 3272, Petach Tikva 4951358, Israel | Tel: +972 3 943-5050 | Fax: +972 3 943 5055
info@shiratech-soluons.com | www.shiratech-soluons.com