CSD06060-Silicon Carbide Schottky Diode VRRM Zero Recovery(R) Rectifier IF(AVG) = 6 A Qc Features * * * * * * * = 600 V = 17 nC Package 600-Volt Schottky Rectifier Zero Reverse Recovery Current Zero Forward Recovery Voltage High-Frequency Operation Temperature-Independent Switching Behavior Extremely Fast Switching Positive Temperature Coefficient on VF TO-263-2 TO-220-2 Benefits * * * * * Replace Bipolar with Unipolar Rectifiers Essentially No Switching Losses Higher Efficiency Reduction of Heat Sink Requirements Parallel Devices Without Thermal Runaway PIN 1 CASE PIN 2 Applications * * * Switch Mode Power Supplies Power Factor Correction - Typical PFC Pout : 600W-1200W Motor Drives - Typical Power : 2HP-3HP Part Number Package Marking CSD06060A TO-220-2 CSD06060 CSD06060G TO-263-2 CSD06060 Maximum Ratings R D06060 Rev. Datasheet: CS Symbol Parameter Value Unit VRRM Repetitive Peak Reverse Voltage 600 V VRSM Surge Peak Reverse Voltage 600 V VDC DC Blocking Voltage 600 V Test Conditions IF(AVG) Average Forward Current 6 10 A TC=150C, DC TC=125C, DC IF(PEAK) Peak Forward Current 15 A TC=125C, TREP<1 mS, Duty=0.5 IFRM Repetitive Peak Forward Surge Current 32 22 A TC=25C, tP = 10 ms, Half Sine Wave TC=125C, tP=10 ms, Half Sine Wave IFSM Non-Repetitive Peak Forward Surge Current 64 A TC=25C, tp = 1.5 mS, Half Sine Wave IFSM Non-Repetitive Peak Forward Surge Current 200 A TC=25C, tP = 10 s, Pulse Ptot Power Dissipation 83.3 27.8 W TC=25C TC=125C -55 to +175 C 1 8.8 Nm lbf-in TJ , Tstg Operating Junction and Storage Temperature TO-220 Mounting Torque Note M3 Screw 6-32 Screw Subject to change without notice. www.cree.com 1 Electrical Characteristics Symbol Parameter Typ. Max. Unit Test Conditions VF Forward Voltage 1.6 1.9 1.8 2.4 V IF = 6 A TJ=25C IF = 6 A TJ=175C IR Reverse Current 50 100 200 1000 A VR = 600 V TJ=25C VR = 600 V TJ=175C QC Total Capacitive Charge 17 nC VR = 600 V, IF = 6A di/dt = 500 A/s TJ = 25C C Total Capacitance 340 40 30 pF VR = 0 V, TJ = 25C, f = 1 MHz VR = 200 V, TJ = 25C, f = 1 MHz VR = 400 V, TJ = 25C, f = 1 MHz Note Note: 1. This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol RJC Parameter Thermal Resistance from Junction to Case Typ. Unit 1.8 C/W Typical Performance 12 200 11 180 10 IR Reverse Current (A) 160 9 IF Forward Current (A) 8 7 6 5 4 120 100 80 60 3 40 2 20 1 0 0 0.5 1.0 1.5 2.0 2.5 3.5 4.0 VF Forward Voltage (V) Figure 1. Forward Characteristics 2 140 CSD06060 Rev. R 0 0 200 400 600 800 VR Reverse Voltage (V) Figure 2. Reverse Characteristics Typical Performance Current Derating 70.0 70 250 65.0 60.0 60 IF(PEAK) Peak Forward Current (A) 200 50.0 50 C Capacitance (pF) Peak Forward Current 55.0 45.0 40.0 40 10%Duty Duty* 10% 30% Duty* 30% Duty 50% Duty* 50% Duty 70% Duty* 70% Duty DC DC 35.0 30.0 30 25.0 20.0 20 15.0 150 100 50 10 10.0 5.0 0.0 0 25 25 0 50 75 100 125 150 175 200 50 75 100 125 150 175 200 1 TC Case Temperature (C) Case Temperature * Frequency > 1KHz DC 70% Duty 50% Duty 30% Duty 10 100 1000 VR Reverse Voltage (V) 10% Duty Figure 3. Current Derating Figure 4. Capacitance vs. Reverse Voltage 1.0E+01 Zth (C/W) 1.0E+00 1.0E-01 1.0E-02 1.0E-03 1.E-07 1.E-06 1.E-05 1.E-04 1.E-03 Tim e (s) Figure 5. Transient Thermal Impedance 3 CSD06060 Rev. R 1.E-02 1.E-01 1.E+00 Typical Performance 100 100.000 90.000 Power Dissipation (W) 80.000 80 70.000 60.000 60 50.000 40.000 40 30.000 20 20.000 10.000 0 0.000 25 50 75 100 125 150 175 25 50 75 100 125 150 175 TC Case Temperature (C) Figure 6. Power Derating 4 CSD06060 Rev. R Package Dimensions POS Package TO-220-2 A B A C P F J B D X S E Y 1 2 G T Z U H V L M W N PIN 1 CASE PIN 2 Millimeters Max Min Max .381 .410 9.677 10.414 DA .235 Inc hes .100 M in M ax .395.223 .410 .255 5.969 M illim eters .120 2.540 M in M ax .337 5.664 10.033 10.414 EB .235.590 .255 .615 5.969 FC D G E H F J G .102.143 .112 2.591 .153 .337 .337 8.560 1.105 1.147 .590 .610 14.986 .500 .550 .149 .153 3.785 R1.147 0.197 28.626 1.127 LH MJ L N M PN .530.025 .550 R 0.010 .045 .028 .036 .195 .045 .055 .195.165 .205 13.462 13.970 .036 .635 R 0.254 .055 1.143 .711 .914 .205 4.953 1.143 1.397 .185 4.191 4.953 5.207 QP .170.048 .180 .054 4.318 1.219 4.572 1.372 SQ S T T U U VV .048 3 .054 1.371 3 5 3 5 3 5 2.388 2.794 6 3 5 .100.094 .110 1.219 6 3 6 3 6 3 .110 2.54 WW XX .014.014 .021 3 3 5 .356 .025 3 5.5 .533 .356 53 C P OS Q Inches Min Y z Y Z 3 3 3 3 5 5 .395 .410 .385 .130 .150 .130 10.033 .410 3.302 .150 14.986 6.477 6.477 3.048 8.560 15.621 2.845 3.632 3.886 8.560 28.067 29.134 15.494 12.700 13.970 3.886 29.134 R 0.197 10.414 9.779 3.810 3.302 .914 1.397 5.207 4.699 6 6 2.794 .635 5.5 10.414 3.810 NOTE: 1. Dimension L, M, W apply for Solder Dip Finish Package Dimensions POS Package TO-263-2 Inches Max Min Max A .396 .406 10.058 10.312 B .297 .303 7.544 7.696 C .057 .063 1.448 1.600 D .237 .243 6.015 6.167 E* 0.00 .070 0.00 1.778 F .048 .062 1.219 1.575 G * PIN 1 PIN 2 CASE Millimeters Min .100 TYP 2.540 TYP H .335 .345 8.509 8.763 J .028 .034 .711 .864 K 2 4 2 4 L .170 .180 4.318 4.572 M .048 .052 1.219 1.321 N .595 .615 15.113 15.621 P 0.00 0.10 0.00 .254 Q R0.018 TYP R0.022 TYP R0.457 TYP R0.559 TYP R .090 .110 2.286 2.794 S .013 .017 .330 .432 T 6.5 8.5 6.5 8.5 U .103 .107 2.616 2.718 V R0.028 TYP R0.032 TYP R0.711 TYP R0.813 TYP W -- 5.0 -- 5.0 Note: * Tab "E" may not be present 5 CSD06060 Rev. R Recommended Solder Pad Layout TO-220-2 TO-263-2 Part Number Package Marking CSD06060A TO-220-2 CSD06060 CSD06060G TO-263-2 CSD06060 Diode Model Diode Model CSD06060 Vf T = VT + If*RT VT= 0.975 + (Tj * -1.0*10-3) RT= 0.09 + (Tj * 0.51*10-3) Note: Tj = Diode Junction Temperature In Degrees Celcius VT RT "The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. This part number was released previously with Sn/Pb solder plating as a standard industry finish. For more information please contact power_sales@cree.com " This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, air traffic control systems, or weapons systems. Copyright (c) 2006-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. 6 CSD06060 Rev. R Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power