Telpower(R) DC Power Protection Systems Bussmann(R) Telpower(R) Compact Fused Disconnect Switch TPC & TPCDS TPC & TPCDS TPCDS - Telpower(R) Compact Fused Disconnect Switch TPC - Telpower(R) Compact Fuse - Current Limiting Ampere Ratings: 3-125A Available Ratings: 3, 4, 5, 6, 7, 8, 10, 12, 15, 20, 25, 30, 40, 50, 60, 75, 90, 100, 125A Voltage Rating: 80Vdc Interrupting Rating: 100,000A Agency Information: UL Recognized (investigated to UL 1801) as a disconnect switch for the interruption of load current by means of withdrawing the fuse pullout. Recognized to U.S. and Canadian requirements under the component recognition program of Underwriters Laboratories Inc. Files E219046 and E56412. General Information: * Fusible solution for replacement of existing dc Telecom circuit breakers. * Compact size fused disconnect switch. * AmpColor IDTM System for easy fuse replacement. * Available in two disconnect switch profiles in addition to a variety of terminal styles. * Local and remote open fuse indication. Local alarm indication provided by LED on TPC fuse. * Remote alarm terminal available in three positions commonly found in dc circuit protection devices. * Recommended .75 inch center-to-center product spacing. * Current-limiting capability * Complete system coordination capability. * Highest interrupting rating (100,000A) available for dc circuit protection of this footprint. * No venting of arc or molten metals and gases during fuse opening. * Fuse material: Black thermoplastic, UL rated 94 V-O, 170 C RTI. * Housing material: Black thermoplastic, UL rated 94 V-O, 120 C RTI. CE logo denotes compliance with European Union Low Voltage Directive (50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact Bussmann Application Engineering for more information. Catalog Number TPC-3 TPC-4 TPC-5 TPC-6 TPC-7 TPC-8 TPC-10 TPC-12 TPC-15 TPC-20 TPC-25 TPC-30 TPC-40 TPC-50 TPC-60 TPC-75 TPC-90 TPC-100 TPC-125 TPCDS-BBE-1 TPCDS-BBE-2 TPCDS-BBE-3 TPCDS-BBM-1 TPCDS-BBM-2 TPCDS-BBM-3 TPCDS-BSE-1 TPCDS-BSE-2 TPCDS-BSE-3 TPCDS-BSM-1 TPCDS-BSM-2 TPCDS-BSM-3 TPCDS-SSE-1 TPCDS-SSE-2 TPCDS-SSE-3 TPCDS-SSM-1 TPCDS-SSM-2 TPCDS-SSM-3 TPCDS-D-BC1* TPCDS-D-BC2* TPCDS-D-CC1* TPCDS-D-SEC1* TPCDS-D-SEC2* TPCDS-D-SMC1* TPCDS-D-SMC2* Description Compact Fuse Compact Fuse Compact Fuse Compact Fuse Compact Fuse Compact Fuse Compact Fuse Compact Fuse Compact Fuse Compact Fuse Compact Fuse Compact Fuse Compact Fuse Compact Fuse Compact Fuse Compact Fuse Compact Fuse Compact Fuse Compact Fuse Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Compact Disconnect Ampere Rating 3A 4A 5A 6A 7A 8A 10A 12A 15A 20A 25A 30A 40A 50A 60A 75A 90A 100A 125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A 3-125A *Not investigated to Canadian Requirements. Look for Telpower(R) BLUETM fuses exclusively from Cooper Bussmann. 3-26-03 SB03069 Form No. TPC & TPCDS Page 1 of 7 Data Sheet: 5023 Telpower(R) DC Power Protection Systems Bussmann(R) Telpower(R) Compact Fused Disconnect Switch Compact Fused Disconnect Switch * Bullet and / or stud terminals for line and load connections (1.940 inch / 49.3 mm spacing). * Front access with bullet terminals. Rear access with stud terminals. * Three terminal style configurations available (see below). * Remote alarm terminal available in three positions common to dc circuit protection devices. Part Number System -Compact Fused Disconnect Switch To identify part number, replace block with appropriate suffix to identify line and load terminals, thread type, and alarm terminal distance. TPCDS - TELPOWER(R) Compact Fused Disconnect Switch TPCDS Terminal Style (select one) BB - Bullet contact on the line Bullet contact on the load BS - Bullet contact on the line Stud terminal on the load SS - Stud terminal on the line Stud terminal on the load Thread (select one) MMetric threads for panel mount fasteners (M3) and stud (M5) EEnglish threads for panel mount fasteners (6-32) and stud (10-32) Remote Alarm Terminal Distance (select one) 1.645 inch from line terminal 2.970 inch from line terminal 31.285 inch from line terminal - TPC & TPCDS DIN Rail Fused Disconnect Switch * 35mm DIN rail mountable * Front access. * Three terminal style configurations available (see below). * Screw clamp accepts 10 to 1 AWG (6mm2 - 50mm2) wire. * Two remote alarm terminal positions available. Part Number System -DIN Rail Fused Disconnect Switch To identify part number, replace block with appropriate suffix to identify line and load terminals, thread type if applicable, and alarm terminal option. TPCDS - TELPOWER(R) Compact Fused Disconnect Switch D - DIN-Rail style product TPCDS - D Terminal Style (select one) CC - Screw Clamp terminal on the line Screw Clamp terminal on the load BC - Bullet contact on the line Screw Clamp terminal on the load SEC - Stud terminal on the line English threads for stud (10-32) Screw Clamp terminal on the load SMC -Stud terminal on the line Metric threads for stud (M5) Screw Clamp terminal on the load Remote Alarm Terminal Location (select one) 1Side ouput (available on CC and BC terminal styles) 2Bottom output, .970 inch from line terminal (available on BC terminal style only) The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Look for Telpower(R) BLUETM fuses exclusively from Cooper Bussmann. 3-26-03 SB03069 Form No. TPC & TPCDS Page 2 of 7 Data Sheet: 5023 Telpower(R) DC Power Protection Systems Bussmann(R) Telpower(R) Compact Fused Disconnect Switch TPC & TPCDS TPCDS Terminal Styles Compact Fused Disconnect Switch TPC Fuse Line: Bullet Line: Bullet Load: Stud Load: Bullet Line: Stud Load: Stud Look for Telpower(R) BLUETM fuses exclusively from Cooper Bussmann. 3-26-03 SB03069 Form No. TPC & TPCDS Page 3 of 7 Data Sheet: 5023 Telpower(R) DC Power Protection Systems Bussmann(R) TPC & TPCDS Telpower(R) Compact Fused Disconnect Switch TPCDS-D Terminal Styles DIN Rail Fused Disconnect Switch Line: Screw Clamp Load: Screw Clamp Line: Stud* Load: Screw Clamp Line: Bullet* Load: Screw Clamp *Note: TPCDS-D Bullet / Screw Clamp and Stud / Screw Clamp terminal styles are not intended for 35 mm DIN-RAIL mounting and will require auxiliary mechanical securement (not provided) for mounting. Alarm Schematic NOTES: 1. The Electronic Monitoring Circuit (EMC) is a high input impedance device that will provide alarming for an open-fuse condition. 2. Typical leakage current through the load when the EMC is operational 2 mA. 3. The resistance, R, must be provided by the end-user to limit the alarm output current to a maximum of 20 mA. The value, R, should be calculated using the system voltage value. If remote alarm functionality is not required, the END-USER CIRCUITRY must still be supplied to provide a resistive path to the return for the local alarm to properly function. 4. The fuse is polarized to maintain proper orientation with the switch housing. The line and load terminals are identified on the switch housing. 5. Electrical integrity of the load must be maintained after fuse has opened in order for the local and remote alarm to properly function. * Look for Telpower(R) BLUETM fuses exclusively from Cooper Bussmann. 3-26-03 SB03069 Form No. TPC & TPCDS Page 4 of 7 Data Sheet: 5023 Telpower(R) DC Power Protection Systems Bussmann(R) TPC & TPCDS Telpower(R) Compact Fused Disconnect Switch AmpColor IDTM System AmpColor IDTM Chart included with each box of ten TPC fuses. TPC Fuses: 3-125A TPM Fuses: 3-30A Reference Data Sheet: 5022 for TPM fuse specifications. Twelve AmpColor IDTM tags included with each box of ten TPC fuses. Telpower's AmpColor IDTM System Is Easy to Use. Each Amp rating is represented by a specific color. Simply label new or existing panels with the appropriate AmpColor tags and post the AmpColor chart nearby. Personnel can quickly and accurately reference the chart for the appropriate replacement fuse. AmpColor IDTM tags Look for Telpower(R) BLUETM fuses exclusively from Cooper Bussmann. 3-26-03 SB03069 Form No. TPC & TPCDS Page 5 of 7 Data Sheet: 5023 Telpower(R) DC Power Protection Systems Telpower(R) Compact Fused Disconnect Switch Bussmann(R) TPC & TPCDS Time-Current Characteristic Curve-Average Melt - 3-20 Amp Look for Telpower(R) BLUETM fuses exclusively from Cooper Bussmann. 3-26-03 SB03069 Form No. TPC & TPCDS Page 6 of 7 Data Sheet: 5023 Telpower(R) DC Power Protection Systems Telpower(R) Compact Fused Disconnect Switch Bussmann(R) TPC & TPCDS Time-Current Characteristic Curve-Average Melt - 25-125 Amp The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Look for Telpower(R) BLUETM fuses exclusively from Cooper Bussmann. 3-26-03 SB03069 Form No. TPC & TPCDS Page 7 of 7 Data Sheet: 5023