www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31509
1Revision: 25-Aug-06
Thick Film Resistor Networks
Single-In-Line, Coated SIP 01, 03, 05 Schematics
CSC
Vishay Dale
FEATURES
•Body height: "A" profile = 0.195" [4.95 mm];
"B" profile = 0.295" [7.50 mm]
•"A" profile standard in 4 thru 12 pins
•Thick film resistive elements
•Reduces total assembly costs
•
Resistor elements protected by tough epoxy conformal coating
•Wide resistance range (10 Ω to 2.2 MΩ)
•Available in bulk pack (preferred) or tube pack
* For resistor power ratings at + 25 °C see derating curves. • See derating curves for Package Power Rating.
** Contact factory for 1 %
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL/
SCHEMATIC
PACKAGE
HEIGHT
RESISTOR
POWER RATING
Max. AT 70 °C*
RESISTANCE
RANGE
Ω
TEMPERATURE
COEFFICIENT
(- 55 °C to + 125 °C)
ppm/°C
STANDARD
TOLERANCE
%
TCR
TRACKING*
(- 55 °C to + 125 °C)
ppm/°C
OPERATING
VOLTAGE
VDC Max.
CSCxxx01 A 0.20 W 10 - 50
50.1 - 2.2M
± 250
± 100 ± 2 (1 %)** ± 50 100
B 0.25 W
CSCxxx03 A 0.30 W 10 - 50
50.1 - 2.2M
± 250
± 100 ± 2 (1 %)** ± 50 100
B 0.40 W
CSCxxx05 A 0.20 W 10 - 50
50.1 - 2.2M
± 250
± 100 ± 2 (1 %)** ± 150 100
B 0.25 W
TECHNICAL SPECIFICATIONS
PARAMETER UNIT CSC SERIES
Voltage Coefficient of Resistance Veff < 50 ppm typical
Dielectric Strength VAC 200
Isolation Resistance (03 Schematic) Ω> 100M
Operating Temperature Range °C - 55 to + 125
GLOBAL PIN COUNT PACKAGE
HEIGHT
SCHEMATIC RESISTANCE TOLERANCE SPECIAL
MODEL VALUE CODE
CSC 04 = 4 Pin A = “A” Profile 01 = Bussed R = Decimal F = ± 1 % Blank = Standard
08 = 8 Pin B = “B” Profile 03 = Isolated K = Thousand G = ± 2 %(Dash Number)
12 = 12 Pin 00 = Special M = Million J = ± 5 %(up to 3 digits)
10R0 = 10 ΩS = Special From 1-999
680K = 680 kΩas applicable
1M00 = 1.0 MΩ
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CSC08A03100RGDA (preferred part numbering format)
CSC 08 A 0 3 1 0 0 RGDA
Historical Part Number example: CSC08A03101G (will continue to be accepted)
PACKAGING
DA = Tin/Lead, Tube
PA = Tin/Lead, Bulk
CSC 08 A 03 101 G D03
HISTORICAL PIN PACKAGE SCHEMATIC RESISTANCE TOLERANCE PACKAGING
MODEL COUNT HEIGHT VALUE CODE
GLOBAL PIN COUNT PACKAGE
HEIGHT
SCHEMATIC RESISTANCE TOLERANCE SPECIAL
MODEL VALUE CODE
CSC 04 = 4 Pin A = “A” Profile 05 = Dual 3 digit F = ± 1 %
Blank = Standard
08 = 8 Pin B = “B” Profile Terminator Impedence code, G = ± 2 %(Dash Number)
12 = 12 Pin followed byJ = ± 5 %(up to 3 digits)
Alpha modifier From 1-999
(see Impedence as applicable
codes table)
New Global Part Numbering: CSC08A05131AGPA (preferred part numbering format)
CSC08A05131AGPA
Historical Part Number example: CSC08A05221331G (will continue to be accepted)
CSC 08 A 05 221 331 G P03
HISTORICAL PIN PACKAGE SCHEMATIC RESISTANCE RESISTANCE TOLERANCE PACKAGING
MODEL COUNT HEIGHT VALUE 1 VALUE 2 CODE
PACKAGING
DA = Tin/Lead, Tube
PA = Tin/Lead, Bulk
Document Number: 31509 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 25-Aug-06 2
CSC
Thick Film Resistor Networks, Single-In-Line, Coated SIP
Vishay Dale
DIMENSIONS in inches [millimeters]
0.012 ± 0.003
[0.305 ± 0.076]
(Leads are Along
Centerline of Body)
0.098 [2.49] Max.
0.045
[1.14]
Pin
#1
C
Max.
B
A
Max.
0.018 ± 0.003
[0.457 ± 0.076]
0.100 ± 0.010 [2.54 ± 0.254]
Non-Accumulative
0.050 [1.27] Max. 0.032
[0.813]
0.130 ± 0.010
[3.30 ± 0.254]
STOCKED RESISTANCE VALUES IN OHMS
(“G” TOLERANCE)
Standard E-24 resistance values stocked. Consult factory.
Many dual terminator resistance values stocked. Consult
factory
01 SCHEMATIC GLOBAL
MODEL
NUMBER OF
RESISTORS A (Maximum) B C (Maximum)
CSC04 3 0.390 [9.90] 0.300 [7.62]
"A" Profile = 0.195 [4.95]
"B" Profile = 0.295 [7.50]
CSC05 4 0.490 [12.45] 0.400 [10.16]
CSC06 5 0.590 [14.99] 0.500 [12.70]
CSC07 6 0.690 [17.53] 0.600 [15.24]
CSC087 0.790 [20.07] 0.700 [17.78]
CSC09 80.890 [22.61] 0.800 [20.32]
CSC10 9 0.990 [25.15] 0.900 [22.86]
CSC11 10 1.09 [27.69] 1.00 [25.40]
CSC12 11 1.19 [30.23] 1.100 [27.94]
03 SCHEMATIC GLOBAL
MODEL
NUMBER OF
RESISTORS A (Maximum) B C (Maximum)
CSC04 2 0.390 [9.90] 0.300 [7.62]
"A" Profile = 0.195 [4.95]
"B" Profile = 0.295 [7.50]
CSC06 3 0.590 [14.99] 0.500 [12.70]
CSC084 0.790 [20.07] 0.700 [17.78]
CSC10 5 0.990 [25.15] 0.900 [22.86]
CSC12 6 1.19 [30.23] 1.100 [27.94]
05 SCHEMATIC GLOBAL
MODEL
NUMBER OF
RESISTORS A (Maximum) B C (Maximum)
CSC04 4 0.390 [9.90] 0.300 [7.62]
"A" Profile = 0.195 [4.95]
"B" Profile = 0.295 [7.50]
CSC05 6 0.490 [12.45] 0.400 [10.16]
CSC06 80.590 [14.99] 0.500 [12.70]
CSC07 10 0.690 [17.53] 0.600 [15.24]
CSC0812 0.790 [20.07] 0.700 [17.78]
CSC09 14 0.890 [22.61] 0.800 [20.32]
CSC10 16 0.990 [25.15] 0.900 [22.86]
CSC11 181.09 [27.69] 1.00 [25.40]
CSC12 20 1.19 [30.23] 1.100 [27.94]
MECHANICAL SPECIFICATIONS
Marking Resistance
to Solvents:
Permanency testing per
MIL-STD-202, Method 215
Solderability: Per MIL-STD-202, Method 208E,
RMA flux
Body: High alumina, epoxy coated
Terminals: Solder plated leads
1 2 3 n-1 n
1 2 3 4 n-1 n
1 2 3 n-1 n
R1
R2
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31509
3Revision: 25-Aug-06
CSC
Vishay Dale
Thick Film Resistor Networks, Single-In-Line, Coated SIP
IMPEDANCE CODES
CODE R1 (Ω) R2 (Ω)CODE R1 (Ω) R2 (Ω)
500B 82130 141A 270 270
750B 120 200 181A 330 390
800C 130 210 191A 330 470
990A 160 260 221B 330 680
101C 180240 281B 560 560
111C 180270 381B 560 1.2K
121B 180390 501C 620 2.7K
121C 220 270 102A 1.5K 3.3K
131A 220 330 202B 3K 6.2K
"A" Profile
1.90
1.50
1.15
0.45
0.30
- 50 + 25 + 70 + 125 + 150
CSC10A Package
Ambient Temperature °C
Derating
Power Rating (Watts)
CSC08A Package
CSC06A Package
Single Resistor
03 Schematic
10 and 05 Schematics
"B" Profile
- 50 + 25 + 70 + 125 + 150
2.50
2.00
1.50
0.60
0.38
CSC08B Package
03 Schematic
Single Resistor
CSC06B Package
CSC10B Package
Ambient Temperature °C
Derating
01 and 05 Schematics
Power Rating (Watts)
"A" PROFILE + 70 °C PACKAGE RATINGS
CSC12A 1.5 watts
CSC11A 1.37 watts
CSC10A 1.25 watts
CSC09A 1.12 watts
CSC08A 1.00 watts
CSC07A 0.87 watts
CSC06A 0.75 watts
CSC05A 0.62 watts
CSC04A 0.40 watts
"B" PROFILE + 70 °C PACKAGE RATINGS
CSC12B 1.90 watts
CSC11B 1.75 watts
CSC10B 1.60 watts
CSC09B 1.45 watts
CSC08B 1.30 watts
CSC07B 1.15 watts
CSC06B 1.00 watts
CSC05B 0.80 watts
CSC04B 0.60 watts
CSC
Thick Film Resistor Networks, Single-In-Line, Coated SIP
Vishay Dale
Document Number: 31509 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 25-Aug-06 4
CIRCUIT APPLICATIONS
01 Schematic Bussed
The CSCxxx01 single-in-line resistor networks provide the user with
nominally equal resistors, each connected to a common pin (Pin No. 1)
.
Commonly used in the following applications:
• "Wired OR" Pull-up • Open Collector Pull-up
• Power Gate Pull-up • TTL Input Pull-down
• MOS/ROM Pull-up/Pull-down • TTL Unused Gate Pull-up
* “A” profile standard, “B” Profile available.
03 Schematic Isolated
The CSCxxx03 single-in-line resistor networks provide the user with
nominally equal resistors. Each resistor is isolated from all others.
Commonly used in the following applications:
• "Wired OR" Pull-up • Long-Line Impedance Balancing
• Power Driven Pull-up • LED Current Limiting
• Power Gate Pull-up • ECL Output Pull-down
• Line Termination • TTL Input Pull-down
* “A” Profile standard, “B” Profile available.
05 Schematic
Dual Terminator
The CSCxxx05 circuits contain series pairs of resistors. Each series
pair is connected between two common lines. The junction of these
resistor pairs is connected to the input terminals. The 05 circuits are
designed for TTL dual-line termination and pulse squaring.
* “A” profile standard, “B” Profile available.
PERFORMANCE
TEST CONDITIONS MAX. ΔR (Typical Test Lots)
Thermal Shock 5 cycles between - 65 °C and + 125 °C ± 0.50 % ΔR
Short Time Overload 2.5 x rated working voltage, 5 seconds ± 0.25 % ΔR
Low Temperature Operation 45 minutes at full rated working voltage at - 65 °C ± 0.25 % ΔR
Moisture Resistance 240 hours with humidity ranging from 80 % RH to 98 % RH ± 1.00 % ΔR
Resistance to Soldering Hea Leads immersed in + 350 °C solder to within 1/16" of body for 3 seconds ± 0.25 % ΔR
Shock Total of 18 shocks at 100 G's ± 0.25 % ΔR
Vibration 12 hours at maximum of 20 G's between 10 and 2000 Hz ± 0.25 % ΔR
Load Life 1000 hours at + 70 °C, rated power applied 1.5 hours “ON”, 0.5 hour
“OFF” for full 1000 hour period. Derated according to the curve. ± 1.00 % ΔR
Terminal Strength 4.5 pound pull for 30 seconds ± 0.25 % ΔR
Insulation Resistance 10 000 Megohm (minimum) -
Dielectric Withstanding Voltage No evidence of arcing or damage (200 V RMS for 1 minute) -
1 2 3 n-1 n
1 2 3 4 n-1 n
1 2 3 n-1 n
R1
R2
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
