T598D337M006ATE025 - Kemet - Product.Network

One world. One KEMET

Benets

• Ultra-low ESR

• ComplieswithAEC-Q200QualicationTestPlan

• High reliability up to 1,000 hours with 85°C/85% RH load

• TS16949certiedplant

• Subject to PPAP/PSW and Change Control

• Meets or exceeds EIA standard 535BAAC

• Taped and reeled per EIA 481

• Halogen-free epoxy/RoHS compliant

Overview

The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic

capacitor with a conductive polymer cathode capable of

delivering very low ESR and improved capacitance retention at

high frequencies. KO-CAP combines the low ESR of multilayer

ceramic, the high capacitance of aluminum electrolytic and the

volumetricefciencyoftantalumintoasinglesurfacemount

package. Unlike liquid electrolyte-based capacitors, KO-CAP has

a very long operational life and high ripple current capabilities.

The T598 High Performance Automotive Grade Polymer

Electrolytic was developed to deliver higher reliability and stability

under harsh environmental conditions. Special enhancements to

the design and material were introduced to deliver 1,000 hours

under 85°C/85% RH/VR and to fully comply with AEC-Q200

QualicationTesting.TheT598ismanufacturedinaISOTS16949

certiedplantandissubjectedtoPPAP/PSWandchangecontrol.

KEMET Organic Capacitor (KO-CAP®) – Automotive

T598 High Performance Automotive Grade

Polymer Electrolytic, 6.3 – 16 VDC

Applications

Typicalapplicationsincludedecouplingandlteringinavarietyofmarketsegments,withspecialemphasisinautomotiveapplicationssuch

as infotainment and input/output in DC/DC converters where harsh conditions such as high humidity and temperature are a concern.

Environmental Compliance

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

SPICE

Foradetailedanalysisofspecicpartnumbers,pleasevisitwww.kemet.comforafreedownloadofKEMET'sSPICEsoftware.

The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over

frequency, temperature, ripple, and DC bias conditions.

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

KEMET Organic Capacitor (KO-CAP®) – Automotive

T598 High Performance Automotive Grade Polymer Electrolytic, 6.3 – 16 VDC

Ordering Information

T598 D107 M010 A T E025

Capacitor

Class Series Case Size Capacitance Code (pF) Capacitance

Tolerance

Rated Voltage

(VDC)

Failure Rate/

Design

Termination

Finish ESR

T = Tantalum 598 =

Automotive

Grade

Polymer

B, D First two digits represent

signicantgures.Third

digitspeciesnumberof

zeros.

M = ±20% 006 = 6.3

010 = 10

016 = 16

A = N/A T = 100% Tin

(Sn)

Maximum ESR

inmΩ,

025=25mΩ

Performance Characteristics

Item

Performance Characteristics

Operating Temperature -55°C to 125°C

Rated Capacitance Range 47 – 330 µF at 120 Hz/25°C

Capacitance Tolerance M Tolerance (20%)

Rated Voltage Range 6.3 – 16 V

DF (120 Hz) RefertoPartNumberElectricalSpecicationTable

ESR (100 kHz) RefertoPartNumberElectricalSpecicationTable

Leakage Current ≤0.1CV(µA)atratedvoltageafter5minutes

KEMET Organic Capacitor (KO-CAP®) – Automotive

T598 High Performance Automotive Grade Polymer Electrolytic, 6.3 – 16 VDC

Qualication

Test Condition

Characteristics

Endurance 125°C at 2/3 rated voltage, 1,000 hours

ΔC/C Within -20%/+10% of initial value

Within 2 x Initial Limits

DCL

Within 2 x Initial Limit

ESR Within 2 x Initial Limit

Storage Life 125°C at 0 volts, 1,000 hours

ΔC/C

Within -20%/+10% of initial value

DF Within 2 x Initial Limits

DCL

Within 2 x Initial Limit

ESR

Within 2 x Initial Limit

Humidity 85°C, 85% RH, Load, 1,000 hours

ΔC/C

Within -5%/+35% of initial value

Within 1.5 x Initial Limits

DCL Within Initial Limit

ESR

Within 2 x Initial Limit

Moisture Resistance MIL-STD-202, Method 106,

65°C, 90-100% RH, No Load, 10 cycles

ΔC/C Within -20%/+10% of initial value

DF Within Initial Limits

DCL

Within Initial Limit

ESR Within 2 x Initial Limits

Thermal Shock MIL-STD-202, Method 107, Condition B, mounted,

-55C° to 125°C, 1,000 cycles

ΔC/C

Within -20%/+10% of initial value

Within Initial Limits

DCL Within Initial Limit

ESR

Within 2 x Initial Limits

Surge Voltage 125°C, 1.32 x (0.67 x VR),1,000cycles,33Ωinseries

ΔC/C Within -20%/+10% of initial value

Within initial limits

DCL

Within initial limits

ESR Within initial limits

Temperature Stability

Extreme temperature exposure at a

succession of continuous steps at

+25ºC, -55ºC, +25ºC, +85ºC, +125ºC, +25ºC

+25°C

-55°C

+85°C

+125°C

ΔC/C IL ±20% ±20% ±30%

1.2 x IL

1.5 x IL

DCL

N/A

10 x IL

Mechanical Shock/Vibration

AEC-Q200 (MIL-STD-202, Method 213, Figure 1, Condition F)

ΔC/C

Within ±10% of initial value

Within initial limits

AEC-Q200 (MIL-STD-202, Method 204, Condition D, 20 g for 20

min/12 cycles each of 3 orientations. Test from 10 – 2, 000 Hz).

ESR Within initial limits

DCL

Within initial limits

Certication

KEMET'sInternalQualicationPlanforthispolymerseriesofcapacitorsfollowsAEC-Q200guidelines.

KEMET Organic Capacitor (KO-CAP®) – Automotive

T598 High Performance Automotive Grade Polymer Electrolytic, 6.3 – 16 VDC

Electrical Characteristics

100

1,000

Capacitance (µF)

Frequency (Hz)

100 1,000 10,000 100,000 1,000,000 10,000,000

598B476M010_Cap (µF) 598D107M010_Cap (µF)

598D227M010_Cap (µF) 598D107M016_Cap (µF)

Capacitance vs. Frequency

ESR vs. Frequency

Impedance, ESR (Ohms)

Frequency (Hz)

100

0.1

0.01

0.001

100 1,000 10,000 100,000 1,000,000 10,000,000

598B476M010_IMP 598B476M010_ESR

598D107M010_IMP 598D107M010_ESR

598D227M010_IMP 598D227M010_ESR

598D107M016_IMP 598D107M016_ESR

Dimensions – Millimeters (Inches)

Metric will govern

SIDE VIEW

ANODE (+) END VIEW

BOTTOM VIEW

CATHODE (-) END VIEW

Termination cutout

at KEMET's option,

either end

Glue pad

shape/design at

KEMET's option

Case Size Component Dimensions Weight

KEMET EIA L W H

F ±0.1

±(0.004)

S ±0.3

±(0.012)

B ±0.15 (Ref)

±0.006

X (Ref) P (Ref) R (Ref) T (Ref)

(Minimum)

(mg)

B3528–21

3.5 ±0.2

(0.138 ±0.008)

2.8 ±0.2

(0.110 ±0.008)

1.9 ±0.1

(0.075 ±0.004)

2.2 (0.087) 0.8 (0.031) 0.4 (0.016)

0.10 ±0.10

(0.004 ±0.004)

0.5 (0.020) 1.0 (0.039) 0.13 (0.005) 1.1 (0.043) 94.85

D7343–31

7.3 ±0.3

(0.287 ±0.012)

4.3 ±0.3

(0.169 ±0.012)

2.8 ±0.3

(0.110 ±0.012)

2.4 (0.094) 1.3 (0.051) 0.5 (0.020)

0.10 ±0.10

(0.004 ±0.004)

0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 434.83

Notes: (Ref) – Dimensions provided for reference only.

KEMET Organic Capacitor (KO-CAP®) – Automotive

T598 High Performance Automotive Grade Polymer Electrolytic, 6.3 – 16 VDC

Table 1 – Ratings & Part Number Reference

Refer to Ordering Information for additional detail.

Derating Guidelines

50%

55%

60%

65%

70%

75%

80%

85%

90%

95%

100%

-55 25 45 85 105 125

Recommended Applicaon Voltage

VR > 16 V

Maximum Transient Voltage

Recommended Applicaon Voltage

VR ≤ 10 V

67%

60%

54%

% Rated Voltage

Temperature (˚C)

Voltage

Rating

Maximum

Recommended

Steady State Voltage

Maximum

Recommended Transient

Voltage (1 ms – 1 µs)

Maximum

Recommended

Steady State Voltage

Maximum

Recommended Transient

Voltage (1 ms – 1 µs)

-55°C to 105°C 105°C to 125°C

2.5V≤VR≤10V 90% of VRVR60% of VR67% of VR

VR ≥ 16 V 80% of VRVR54% of VR67% of VR

VR = Rated Voltage

Rated

Voltage

Rated

Cap

Case Code/

Case Size

KEMET Part

Number

Leakage DF ESR

Maximum

Allowable

Ripple Current

MSL

Maximum

Operating

Temp

VDC at 105ºC µF KEMET/EIA (See below for

part options)

µA at+25ºC

Max/5 Min

% at +25ºC

120 Hz Max

mΩ at +25ºC

100 kHz Max

mA at +45ºC

100 kHz

Reow Temp

≤ 260ºC

ºC

6.3 330 D/7343-31 T598D337M006ATE025 208 10 25 3000 3125

6.3 330 D/7343-31 T598D337M006ATE040 208 10 40 2372 3125

6.3 330 D/7343-31 T598D337M006ATE080 208 10 80 1677 3125

10 47 B/3528-21 T598B476M010ATE070 47 870 1347 3125

10 100 D/7343-31 T598D107M010ATE025 100 10 25 3000 3125

10 100 D/7343-31 T598D107M010ATE040 100 10 40 2372 3125

10 100 D/7343-31 T598D107M010ATE080 100 10 80 1677 3125

10 220 D/7343-31 T598D227M010ATE025 220 10 25 3000 3125

10 220 D/7343-31 T598D227M010ATE040 220 10 40 2372 3125

10 220 D/7343-31 T598D227M010ATE080 220 10 80 1677 3125

16 100 D/7343-31 T598D107M016ATE050 160 10 50 2121 3125

KEMET Organic Capacitor (KO-CAP®) – Automotive

T598 High Performance Automotive Grade Polymer Electrolytic, 6.3 – 16 VDC

Ripple Current/Ripple Voltage

Permissible AC ripple voltage and current are related to equivalent

series resistance (ESR) and the power dissipation capabilities of

the device. Permissible AC ripple voltage which may be applied is

limited by two criteria:

1. The positive peak AC voltage plus the DC bias voltage, if any,

must not exceed the DC voltage rating of the capacitor.

2. The negative peak AC voltage in combination with bias

voltage,ifany,mustnotexceedtheallowablelimitsspeciedfor

reverse voltage. See the Reverse Voltage section for allowable

limits.

The maximum power dissipation by case size can be determined

using the table at right. The maximum power dissipation rating

stated in the table must be reduced with increasing environmental

operating temperatures. Refer to the table below for temperature

compensation requirements.

Temperature Compensation Multipliers

for Maximum Ripple Current

T≤45°C

45°C<T≤85°C

85°C<T≤125°C

1.00

0.70

0.25

T= Environmental Temperature

Using the P max of the device, the maximum allowable rms ripple

current or voltage may be determined.

I(max) = √P max/R

E(max) = Z √P max/R

I = rms ripple current (amperes)

E = rms ripple voltage (volts)

P max = maximum power dissipation (watts)

Case Code EIA

Case Code

Maximum Power

Dissipation (P max)

mWatts at 45°C

with +30°C Rise

3528-21

127

7343-31

225

The maximum power dissipation rating must be reduced with increasing

environmental operating temperatures. Refer to the Temperature

Compensation Multiplier table for details.

R = ESR at specied frequency (ohms)

Z = Impedance at specied frequency (ohms)

Reverse Voltage

Polymer electrolytic capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity.

These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table.

Temperature

Permissible Transient Reverse Voltage

25°C

15% of Rated Voltage

55°C

10% of Rated Voltage

85°C

5% of Rated Voltage

105°C

3% of Rated Voltage

125°C*

1% of Rated Voltage

*For series rated to 125°C

KEMET Organic Capacitor (KO-CAP®) – Automotive

T598 High Performance Automotive Grade Polymer Electrolytic, 6.3 – 16 VDC

Table 2 – Land Dimensions/Courtyard

KEMET

Metric

Size

Code

Density Level A:

Maximum (Most) Land

Protrusion (mm)

Density Level B:

Median (Nominal) Land

Protrusion (mm)

Density Level C:

Minimum (Least) Land

Protrusion (mm)

Case

EIA

B3528–21 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24

D7343–31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84

Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reow solder processes.

Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reow solder processes.

Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualication

testing based on the conditions outlined in IPC standard 7351 (IPC–7351).

¹ Height of these chips may create problems in wave soldering.

2 Land pattern geometry is too small for silkscreen outline.

W W

Grid Placement Courtyard

KEMET Organic Capacitor (KO-CAP®) – Automotive

T598 High Performance Automotive Grade Polymer Electrolytic, 6.3 – 16 VDC

Soldering Process

KEMET’s families of surface mount capacitors are compatible

withwave(singleordual),convection,IR,orvaporphasereow

techniques. Preheating of these components is recommended

toavoidextremethermalstress.KEMET'srecommendedprole

conditionsforconvectionandIRreowreecttheproleconditions

of the IPC/J–STD–020D standard for moisture sensitivity testing.

Thedevicescansafelywithstandamaximumofthreereow

passes at these conditions.

Please note that although the X/7343–43 case size can withstand

wavesoldering,thetallprole(4.3mmmaximum)dictatescarein

wave process development.

Handsolderingshouldbeperformedwithcareduetothedifculty

in process control. If performed, care should be taken to avoid

contact of the soldering iron to the molded case. The iron should

be used to heat the solder pad, applying solder between the pad

andthetermination,untilreowoccurs.Oncereowoccurs,the

iron should be removed immediately. “Wiping” the edges of a chip

and heating the top surface is not recommended.

Prole Feature SnPb Assembly Pb-Free Assembly

Preheat/Soak

Temperature Minimum (T

Smin

)100°C 150°C

Temperature Maximum (T

Smax

)150°C 200°C

Time (t

) from T

smin

to T

smax

) 60 – 120 seconds 60 – 120 seconds

Ramp-up Rate (T

to T

)3°C/seconds maximum 3°C/seconds maximum

Liquidous Temperature (TL)

183°C

217°C

Time Above Liquidous (t

) 60 – 150 seconds 60 – 150 seconds

Peak Temperature (TP)

220°C*

235°C**

250°C*

260°C**

Time within 5°C of Maximum

Peak Temperature (tP)

20 seconds maximum 30 seconds maximum

Ramp-down Rate (TP to TL)

6°C/seconds maximum

Time 25°C to Peak Temperature 6 minutes maximum 8 minutes maximum

Note: All temperatures refer to the center of the package, measured on the

package body surface that is facing up during assembly reow.

*Case Size D, E, P, Y, and X

**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z

Storage

AllKO-CAPseriesareshippedinmoisturebarrierbagswithadesiccantandmoistureindicatorcard.Theseseriesareclassied

as MSL3 (Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working

environments with temperatures not to exceed 40°C and humidity not in excess of 90% RH.

Time

Temperature

smin

25ºC to Peak

smax

Maximum Ramp Up Rate = 3ºC/seconds

Maximum Ramp Down Rate = 6ºC/seconds

KEMET Organic Capacitor (KO-CAP®) – Automotive

T598 High Performance Automotive Grade Polymer Electrolytic, 6.3 – 16 VDC

Construction

Leadframe

(- Cathode)

Leadframe

(+ Anode)

Wire

Molded Epoxy

Case

Molded Epoxy

Case

Weld

(to attach wire)

Silver Adhesive

Polarity

Bevel (+)

Polarity Stripe (+) Detailed Cross Section

Wire

Tantalum

Ta2O5 Dielectric

(First Layer)

Carbon

(Third Layer)

Silver Paint

(Fourth Layer)

Polymer

(Second Layer)

Capacitor Marking

* 528 = 28th week of 2015

Polarity

Indicator (+)

Rated

Voltage

Picofarad

Code

KEMET

Date

Code*

Date Code *

1st digit = Last number of Year 5 = 2015

6 = 2016

7 = 2017

8 = 2018

2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to

52 = 52nd week of the Year

KEMET Organic Capacitor (KO-CAP®) – Automotive

T598 High Performance Automotive Grade Polymer Electrolytic, 6.3 – 16 VDC

Tape & Reel Packaging Information

KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA

Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible

with all tape-fed automatic pick-and-place systems.

Table 3 – Packaging Quantity

Case Code

Tape Width

(mm) 7" Reel* 13" Reel*

KEMET

EIA

3216-12

2,500

10,000

3528-12

2,500

10,000

3528-15

2,000

8,000

6032-15

1,000

5,000

6032-19

1,000

3,000

7343-15

1,000

3,000

7343-17

1,000

3,000

7343-20

1,000

3,000

3216-18

2,000

9,000

3528-21

2,000

8,000

6032-28

500

3,000

7343-31

500

2,500

7343-12

1,000

3,000

7343-40

500

2,000

7343-43

500

2,000

E/T428P

7360-38

500

2,000

7360-20

1,000

2,500

* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.

Top Tape Thickness

0.10 mm (0.004")

Maximum Thickness

8 mm (0.315")

12 mm (0.472") 180 mm (7.0")

330 mm (13.0")

KEMET Organic Capacitor (KO-CAP®) – Automotive

T598 High Performance Automotive Grade Polymer Electrolytic, 6.3 – 16 VDC

Figure 1 – Embossed (Plastic) Carrier Tape Dimensions

Center Lines of Cavity

User Direction of Unreeling

Cover Tape

is for tape feeder reference only,

including draft concentric about B

ØD

ØDo

Embossment

For cavity size,

see Note 1 Table 4

[10 pitches cumulative

tolerance on tape ± 0.2 mm]

Table 4 – Embossed (Plastic) Carrier Tape Dimensions

Metric will govern

Constant Dimensions — Millimeters (Inches)

Tape Size D0

Minimum

Note 1

E1P0 P2

R Reference

Note 2

Minimum

Note 3

T Maximum T1 Maximum

8 mm

1.5 +0.10/-0.0

(0.059 +0.004/-0.0)

1.0

(0.039)

1.75 ±0.10

(0.069 ±0.004)

4.0 ±0.10

(0.157 ±0.004)

2.0 ±0.05

(0.079 ±0.002)

25.0

(0.984)

0.600

(0.024)

0.600

(0.024)

0.100

(0.004)

12 mm 1.5

(0.059)

(1.181)

16 mm

2.0 ±0.1

(0.079 ±0.059)

1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and

hole location shall be applied independent of each other.

2. The tape, with or without components, shall pass around R without damage (see Figure 4).

3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).

4. B1 dimension is a reference dimension for tape feeder clearance only.

5. The cavity de ned by A0, B0 and K0 shall surround the component with suf cient clearance that:

(a) the component does not protrude above the top surface of the carrier tape.

(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.

(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).

(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).

(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.

Variable Dimensions — Millimeters (Inches)

Tape Size Pitch

Maximum

Note 4

E2 Minimum F P1 T2 Maximum W Maximum A0, B0 & K0

8 mm Single (4 mm)

4.35

(0.171)

6.25

(0.246)

3.5 ±0.05

(0.138 ±0.002)

2.0 ±0.05 or 4.0 ±0.10

(0.079 ±0.002 or 0.157 ±0.004)

2.5

(0.098)

8.3

(0.327)

Note 512 mm

Single (4 mm) &

Double (8 mm)

8.2

(0.323)

10.25

(0.404)

5.5 ±0.05

(0.217 ±0.002)

2.0 ±0.05 (0.079 ±0.002) or 4.0

±0.10 (0.157 ±0.004) or 8.0 ±0.10

(0.315 ±0.004)

4.6

(0.181)

12.3

(0.484)

16 mm Triple (12 mm)

12.1

(0.476)

14.25

(0.561)

7.5±0.10

(0.295 ±0.004)

4.0 ±0.10 (0.157 ±0.004) to 12.0

±0.10 (0.472 ±0.004)

8.0 (0.315)

16.3

(0.642)

KEMET Organic Capacitor (KO-CAP®) – Automotive

T598 High Performance Automotive Grade Polymer Electrolytic, 6.3 – 16 VDC

Packaging Information Performance Notes

1. Cover Tape Break Force: 1.0 Kg minimum.

2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:

Tape Width Peel Strength

8 mm 0.1 to 1.0 Newton (10 to 100 gf)

12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf)

The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°

from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.

3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA

Standards 556 and 624.

Figure 2 – Maximum Component Rotation

Maximum Component Rotation

Top View

Maximum Component Rotation

Side View

Tape Maximum

Width (mm) Rotation (°

8,12 20

16 – 200 10 Tape Maximum

Width (mm) Rotation ( °

8,12 20

16 – 56 10

72 – 200 5

Typical Pocket Centerline

Typical Component Centerline

Figure 3 – Maximum Lateral Movement

0.5 mm maximum

8 mm & 12 mm Tape

1.0 mm maximum

16 mm Tape

Figure 4 – Bending Radius

Bending

Radius

Embossed

Carrier

Punched

Carrier

KEMET Organic Capacitor (KO-CAP®) – Automotive

T598 High Performance Automotive Grade Polymer Electrolytic, 6.3 – 16 VDC

Figure 5 – Reel Dimensions

AD(See Note)

Full Radius,

See Note

B(see Note)

Access Hole at

Slot Location

(Ø 40 mm minimum)

If present,

tape slot in core

for tape start:

2.5 mm minimum width x

10.0 mm minimum depth

W3(Includes

flange distortion

at outer edge)

W2(Measured at hub)

W1(Measured at hub)

(Arbor hole

diameter)

Note: Drive spokes optional; if used, dimensions B and D shall apply.

Table 5 – Reel Dimensions

Metric will govern

Constant Dimensions — Millimeters (Inches)

Tape Size A B Minimum C D Minimum

8 mm

178 ±0.20

(7.008 ±0.008)

330 ±0.20

(13.000 ±0.008)

1.5

(0.059)

13.0 +0.5/-0.2

(0.521 +0.02/-0.008)

20.2

(0.795)

12 mm

16 mm

Variable Dimensions — Millimeters (Inches)

Tape Size N Minimum W

Maximum W

8 mm

(1.969)

8.4 +1.5/-0.0

(0.331 +0.059/-0.0)

14.4

(0.567)

Shall accommodate tape width

without interference

12 mm

12.4 +2.0/-0.0

(0.488 +0.078/-0.0)

18.4

(0.724)

16 mm

16.4 +2.0/-0.0

(0.646 +0.078/-0.0)

22.4

(0.882)

KEMET Organic Capacitor (KO-CAP®) – Automotive

T598 High Performance Automotive Grade Polymer Electrolytic, 6.3 – 16 VDC

Figure 6 – Tape Leader & Trailer Dimensions

Trailer

160 mm Minimum

Carrier Tape

END START

Round Sprocket Holes

Elongated Sprocket Holes

(32 mm tape and wider)

Top Cover Tape

Punched Carrier

8 mm & 12 mm only

Embossed Carrier

Components

100 mm

Minimum Leader

400 mm Minimum

Figure 7 – Maximum Camber

Carrier Tape

Round Sprocket Holes

1 mm Maximum, either direction

Straight Edge

250 mm

Elongated sprocket holes

(32 mm & wider tapes)

KEMET Organic Capacitor (KO-CAP®) – Automotive

T598 High Performance Automotive Grade Polymer Electrolytic, 6.3 – 16 VDC

KEMET Corporation

World Headquarters

2835 KEMET Way

Simpsonville, SC 29681

Mailing Address:

P.O. Box 5928

Greenville, SC 29606

www.kemet.com

Tel: 864-963-6300

Fax: 864-963-6521

Corporate Of ces

Fort Lauderdale, FL

Tel: 954-766-2800

North America

Southeast

Lake Mary, FL

Tel: 407-855-8886

Northeast

Wilmington, MA

Tel: 978-658-1663

Central

Novi, MI

Tel: 248-994-1030

West

Milpitas, CA

Tel: 408-433-9950

Mexico

Guadalajara, Jalisco

Tel: 52-33-3123-2141

Europe

Southern Europe

Sasso Marconi, Italy

Tel: 39-051-939111

Skopje, Macedonia

Tel: 389-2-55-14-623

Central Europe

Landsberg, Germany

Tel: 49-8191-3350800

Kamen, Germany

Tel: 49-2307-438110

Northern Europe

Wyboston, United Kingdom

Tel: 44-1480-273082

Espoo, Finland

Tel: 358-9-5406-5000

Asia

Northeast Asia

Hong Kong

Tel: 852-2305-1168

Shenzhen, China

Tel: 86-755-2518-1306

Beijing, China

Tel: 86-10-5877-1075

Shanghai, China

Tel: 86-21-6447-0707

Seoul, South Korea

Tel: 82-2-6294-0550

Taipei, Taiwan

Tel: 886-2-27528585

Southeast Asia

Singapore

Tel: 65-6701-8033

Penang, Malaysia

Tel: 60-4-6430200

Bangalore, India

Tel: 91-806-53-76817

Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not

assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of

KEMET Electronics Corporation.

KEMET Organic Capacitor (KO-CAP®) – Automotive

T598 High Performance Automotive Grade Polymer Electrolytic, 6.3 – 16 VDC

Disclaimer

Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand

verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.

All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are

notintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.TheInformationisintendedforuseonly

by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise

provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still

occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective

circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not

be required.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Kemet:

T598D227M010ATE040 T598D107M010ATE080 T598D227M010ATE025 T598D107M010ATE025

T598D337M006ATE025 T598D337M006ATE040 T598D227M010ATE080 T598D107M010ATE040

T598D337M006ATE080 T598D107M016ATE050