Accessories
J
J.1
Contents
Accessories
Accessories
Introduction J.2
Wire end ferrules with plastic collar J.4
Twin-wire end ferrules with plastic collar J.10
Wire end ferrules for short-circuit and earth-fault-proof cables J.13
Wire end ferrules with plastic collar, special sizes J.14
Wire end ferrules without plastic collar J.15
Assortment of wire end ferrules J.16
Insulated cable connectors, PVC, with conical cable entry J.18
Accessories
J
J.2
Introduction
Weidmüller stocks a comprehensive range of wire end ferrules and insulated cable lugs for immediate supply.
Wire end ferrules
Wire end ferrules ensure the long-term quality of electrical
connections. Another advantage is their usefulness during
installation. The wide range of products embraces wire end
ferrules with or without plastic collars and twin wire end
ferrules in all the colours normally required by users.
Insulated cable lugs
Insulated cable lugs ensure the long-term quality of electrical
connections. Most of the products in the range (apart from
the butt connectors) have a conical inlet.
This guarantees optimum entry of the conductor as the
strands are automatically centred.
Accessories
Accessories
J
J.3
Introduction
Tools
Tools for insulated cable lugs
Tool Type of contact
Order No. 0.5 - 1.5 1.5 - 2.5 4.0 - 6.0
CTI 6 9006120000 lll
CTI 6 G 9202850000 lll
HTI 15 9014400000 l l
Station red blue yellow
Crimping tools for ferrules
PZ 1.5 stripax® PZ 3 PZ 4 PZ 6 PZ 6 HEX PZ 6/5 PZ 16 PZ 50
plus 2.5 roto
Order No.
9005990000 9020000000 0567300000 9012500000 9014350000 9013650000 9011460000 9012600000 9006450000
Ferrule mm2
H 0.14 l l l
H 0.25 l l l l
H 0.34 l l l l
H 0.5 l l1lllll
H 0.75 l l1lllll
H 1.0 l l1lllll
H 1.5 l l1lllll
H 2.5 l1lllll
H 4.0 lllll
H 6.0 l l l l l
H 10.0 l
H 16.0 l
H 25.0 l
H 35.0 l
H 50.0 l
l1 = ferrules in strip form only
Twin wire end ferrules are to be crimped according to the following table:
Tool Ferrules
Order No. H 0.5 H 0.75 H 1.0 H 1.5 H 2.5 H 4.0 H 6.0 H 10.0 H 16.0
PZ 1.5 9005990000 l l
PZ 3 0567300000 lllll
PZ 4 9012500000 lllll
PZ 6 roto 9014350000 llllll
PZ 6/5 9011460000 lllll
Station 1.5 mm21.5 mm22.5 mm22.5 mm24 mm26 mm2
PZ ZH 16 9013600000 l l l
J.4
Accessories
J
Wire end ferrules with plastic collar
Weidmüller colour code Ordering data
packed loose Type ø mm2AWG L1 L2 D1 D2 S1 S2
Stripping length
Colour Qty. Order No.
H0.25/10 0.25 24 10.0 6.0 0.8 1.8 0.15 0.25 8.0 l light blue 500 9025740000
H0.25/12 0.25 24 12.0 8.0 0.8 1.8 0.15 0.25 10.0 l light blue 500 9025760000
H0.34/10 0.34 22 10.0 6.0 0.8 2.0 0.15 0.25 8.0 l turquoise 500 9025750000
H0.34/12 0.34 22 12.0 8.0 0.8 2.0 0.15 0.25 10.0 l turquoise 500 9025770000
H0.5/12 0.50 20 12.0 6.0 1.0 2.6 0.15 0.25 8.0 l orange 500 0409500000
H0.5/14 0.50 20 14.0 8.0 1.0 2.6 0.15 0.25 10.0 l orange 500 0690700000
H0.5/16 0.50 20 16.0 10.0 1.0 2.6 0.15 0.25 12.0 l orange 500 9025870000
H0.75/12 0.75 18 12.0 6.0 1.2 2.8 0.15 0.25 8.0 m white 500 0409600000
H0.75/14 0.75 18 14.0 8.0 1.2 2.8 0.15 0.25 10.0 m white 500 0462900000
H0.75/16 0.75 18 16.0 10.0 1.2 2.8 0.15 0.25 12.0 m white 500 9025860000
H0.75/18 0.75 18 18.0 12.0 1.2 2.8 0.15 0.25 14.0 m white 500 9025910000
H1.0/12 1.00 17 12.0 6.0 1.4 3.0 0.15 0.25 8.0 l yellow 500 0409700000
H1.0/14 1.00 17 14.0 8.0 1.4 3.0 0.15 0.25 10.0 l yellow 500 0463000000
H1.0/16 1.00 17 16.0 10.0 1.4 3.0 0.15 0.25 12.0 l yellow 500 9025950000
H1.0/18 1.00 17 18.0 12.0 1.4 3.0 0.15 0.25 15.0 l yellow 500 9025930000
H1.5/14 1.50 16 14.0 8.0 1.7 3.5 0.15 0.25 10.0 l red 500 0463100000
H1.5/16 1.50 16 16.0 10.0 1.7 3.5 0.15 0.25 12.0 l red 500 0635100000
H1.5/24 1.50 16 24.0 18.0 1.7 3.5 0.15 0.25 20.0 l red 500 0565600000
H2.5/15D 2.50 14 15.0 8.0 2.2 4.2 0.15 0.25 10.0 l blue 500 9019160000
H2.5/19D 2.50 14 19.0 12.0 2.2 4.2 0.15 0.25 14.0 l blue 500 9019170000
H2.5/25D 2.50 14 25.0 18.0 2.2 4.2 0.15 0.25 20.0 l blue 500 9019180000
H4.0/18D 4.00 12 18.0 10.0 2.8 4.8 0.2 0.3 12.0 l grey 500 9019190000
H4.0/20D 4.00 12 20.0 12.0 2.8 4.8 0.2 0.3 14.0 l grey 500 9019200000
H4.0/26D 4.00 12 26.0 18.0 2.8 4.8 0.2 0.3 20.0 l grey 100 9019210000
H6.0/20 6.00 10 20.0 12.0 3.5 6.3 0.2 0.3 14.0 l black 100 0533500000
H6.0/26 6.00 10 26.0 18.0 3.5 6.3 0.2 0.3 20.0 l black 100 0565700000
H10.0/22 10.00 7 22.0 12.0 4.5 7.6 0.2 0.4 15.0 l ivory 100 0534200000
H10.0/28 10.00 7 28.0 18.0 4.5 7.6 0.2 0.4 21.0 l ivory 100 0565800000
H16.0/22 16.00 6 22.0 12.0 5.8 8.8 0.2 0.4 15.0 l green 100 0565900000
H16.0/28 16.00 6 28.0 18.0 5.8 8.8 0.2 0.4 21.0 l green 100 0566000000
H25.0/30 25.00 3 30.0 16.0 7.3 11.2 0.2 0.4 18.0 l brown 50 0317000000
H25.0/36 25.00 3 36.0 22.0 7.3 11.2 0.2 0.4 24.0 l brown 50 0317100000
H35.0/30 35.00 2 30.0 16.0 8.3 12.7 0.2 0.4 19.0 l beige 50 0317200000
H35.0/39 35.00 2 39.0 25.0 8.3 12.7 0.2 0.4 28.0 l beige 50 0317300000
H50.0/36 50.00 1 36.0 20.0 10.3 15.0 0.3 0.5 26.0 l olive green 50 0444200000
H70.0/37 70.00 2/0 37.0 21.0 12.7 16.0 0.35 0.6 26.0 l yellow 25 9028200000
H95.0/44 95.00 3/0 44.0 25.0 14.7 18.0 0.35 0.6 31.0 l red 25 9028210000
H120.0/50 120.00 4/0 50.0 30.0 16.5 21.0 0.5 0.7 36.0 l blue 25 9028220000
H150.0/54 150.00 300 MCM 54.0 32.0 18.5 23.5 0.5 0.75 38.0 l yellow 25 9028230000
Weidmüller colour code Ordering data
in multipack bag Type ø mm2AWG L1 L2 D1 D2 S1 S2
Stripping length
Colour Qty. Order No.
H0.14/10 0.14 26 10.0 6.0 0.6 1.5 0.15 0.25 8.0 l grey 500 9005180000
H0.14/12 0.14 26 12.0 8.0 0.6 1.5 0.15 0.25 10.0 l grey 500 9028240000
H0.25/10 0.25 24 10.0 6.0 0.8 1.8 0.15 0.25 8.0 l light blue 500 9026050000
H0.25/12 0.25 24 12.0 8.0 0.8 1.8 0.15 0.25 10.0 l light blue 500 9025780000
H0.34/10 0.34 22 10.0 6.0 0.8 2.0 0.15 0.25 8.0 l turquoise 500 9026030000
H0.34/12 0.34 22 12.0 8.0 0.8 2.0 0.15 0.25 10.0 l turquoise 500 9025790000
H0.5/12 0.50 20 12.0 6.0 1.0 2.6 0.15 0.25 8.0 l orange 500 9028260000
H0.5/14 0.50 20 14.0 8.0 1.0 2.6 0.15 0.25 10.0 l orange 500 9026060000
H0.5/16 0.50 20 16.0 10.0 1.0 2.6 0.15 0.25 12.0 l orange 500 9028270000
H0.75/12 0.75 18 12.0 6.0 1.2 2.8 0.15 0.25 8.0 m white 500 9028280000
H0.75/14 0.75 18 14.0 8.0 1.2 2.8 0.15 0.25 10.0 m white 500 9026070000
H0.75/16 0.75 18 16.0 10.0 1.2 2.8 0.15 0.25 12.0 m white 500 9028290000
H0.75/18 0.75 18 18.0 12.0 1.2 2.8 0.15 0.25 14.0 m white 500 9028300000
H1.0/12 1.00 17 12.0 6.0 1.4 3.0 0.15 0.25 8.0 l yellow 500 9028310000
H1.0/14 1.00 17 14.0 8.0 1.4 3.0 0.15 0.25 10.0 l yellow 500 9026080000
H1.0/16 1.00 17 16.0 10.0 1.4 3.0 0.15 0.25 12.0 l yellow 500 9028320000
H1.0/18 1.00 17 18.0 12.0 1.4 3.0 0.15 0.25 15.0 l yellow 500 9028340000
H1.5/14 1.50 16 14.0 8.0 1.7 3.5 0.15 0.25 10.0 l red 500 9026090000
H1.5/16 1.50 16 16.0 10.0 1.7 3.5 0.15 0.25 12.0 l red 500 9028350000
H2.5/15 2.50 14 15.0 8.0 2.2 4.2 0.15 0.25 10.0 l blue 500 9026100000
H4.0/18 4.00 12 18.0 10.0 2.8 4.8 0.2 0.3 12.0 l grey 250 9026010000
L2
L1
ø D1
S1
ø D2
S2
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a not readily flammable material on request
For conductors from 0.14 to 150 mm2 (AWG 26-300MCM)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
J.5
Accessories
J
Wire end ferrules with plastic collar
Weidmüller colour code Ordering data
Strip of wire end ferrules Type ø mm2AWG L1 L2 D1 D2 S1 S2
Stripping length
Colour Qty. Order No.
H0.5/14 0.50 20 14.0 8.0 1.0 2.6 0.15 0.25 10.0 l orange 500 9004270000
H0.75/14 0.75 18 14.0 8.0 1.2 2.8 0.15 0.25 10.0 m white 500 9004290000
H1.0/14 1.00 17 14.0 8.0 1.4 3.0 0.15 0.25 10.0 l yellow 500 9004320000
H1.5/14 1.50 16 14.0 8.0 1.7 3.2 0.15 0.25 10.0 l red 500 9004340000
H2.5/14D 2.50 14 14.0 8.0 2.2 4.0 0.15 0.25 11.0 l blue 500 9004360000
Weidmüller colour code Ordering data
Reel of wire end ferrules Type ø mm2AWG L1 L2 D1 D2 S1 S2
Stripping length
Colour Qty. Order No.
H0.34/12 0.34 22 12.0 8.0 0.8 2.0 0.15 0.25 10.0 l turquoise 5000 9004390000
H0.5/14 0.50 20 14.0 8.0 1.0 2.6 0.15 0.25 10.0 l orange 5000 9005810000
H0.75/14 0.75 18 14.0 8.0 1.2 2.8 0.15 0.25 10.0 m white 5000 9005820000
H1.0/14 1.00 17 14.0 8.0 1.4 3.0 0.15 0.25 11.0 l yellow 5000 9005830000
H1.5/14 1.50 16 14.0 8.0 1.7 3.2 0.15 0.25 10.0 l red 5000 9005840000
H2.5/14D 2.50 14 14.0 8.0 2.2 4.0 0.15 0.25 11.0 l blue 3000 9005850000
L2
L1
ø D1
S1
ø D2
S2
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a not readily flammable material on request
For conductors from 0.5 to 2.5 mm2 (AWG 22-14)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
J.6
Accessories
J
Wire end ferrules with plastic collar
DIN colour code Ordering data
packed loose Type ø mm2AWG L1 L2 D1 D2 S1 S2
Stripping length
Colour VG* Qty. Order No.
H0.5/12D 0.50 20 12.0 6.0 1.0 2.6 0.15 0.25 8.0 m white T 20A 001 A 500 9019000000
H0.5/14D 0.50 20 14.0 8.0 1.0 2.6 0.15 0.25 10.0 m white T 20A 002 A 500 9019010000
H0.5/16D 0.50 20 16.0 10.0 1.0 2.6 0.15 0.25 12.0 m white T 20A 003 A 500 9019020000
H0.75/12D 0.75 18 12.0 6.0 1.2 2.8 0.15 0.25 8.0 l grey T 20A 004 A 500 9019030000
H0.75/14D 0.75 18 14.0 8.0 1.2 2.8 0.15 0.25 10.0 l grey T 20A 005 A 500 9019040000
H0.75/16D 0.75 18 16.0 10.0 1.2 2.8 0.15 0.25 12.0 l grey T 20A 006 A 500 9019050000
H0.75/18D 0.75 18 18.0 12.0 1.2 2.8 0.15 0.25 14.0 l grey T 20A 007 A 500 9019060000
H1.0/12D 1.00 17 12.0 6.0 1.4 3.0 0.15 0.25 8.0 l red T 20A 008 A 500 9019070000
H1.0/14D 1.00 17 14.0 8.0 1.4 3.0 0.15 0.25 10.0 l red T 20A 009 A 500 9019080000
H1.0/16D 1.00 17 16.0 10.0 1.4 3.0 0.15 0.25 12.0 l red T 20A 010 A 500 9019100000
H1.0/18D 1.00 17 18.0 12.0 1.4 3.0 0.15 0.25 15.0 l red T 20A 011 A 500 9019110000
H1.5/14D 1.50 16 14.0 8.0 1.7 3.5 0.15 0.25 10.0 l black T 20A 012 A 500 9019120000
H1.5/16D 1.50 16 16.0 10.0 1.7 3.5 0.15 0.25 12.0 l black T 20A 013 A 500 9019130000
H1.5/18D 1.50 16 18.0 12.0 1.7 3.5 0.15 0.25 15.0 l black T 20A 014 A 500 9019140000
H1.5/24D 1.50 16 24.0 18.0 1.7 3.5 0.15 0.25 20.0 l black T 20A 015 A 500 9019150000
H2.5/15D 2.50 14 15.0 8.0 2.2 4.2 0.15 0.25 10.0 l blue T 20A 016 A 500 9019160000
H2.5/19D 2.50 14 19.0 12.0 2.2 4.2 0.15 0.25 14.0 l blue T 20A 017 A 500 9019170000
H2.5/25D 2.50 14 25.0 18.0 2.2 4.2 0.15 0.25 20.0 l blue T 20A 018 A 500 9019180000
H4.0/18D 4.00 12 18.0 10.0 2.8 4.8 0.2 0.3 12.0 l grey T 20A 019 A 500 9019190000
H4.0/20D 4.00 12 20.0 12.0 2.8 4.8 0.2 0.3 14.0 l grey T 20A 020 A 500 9019200000
H4.0/26D 4.00 12 26.0 18.0 2.8 4.8 0.2 0.3 20.0 l grey T 20A 021 A 100 9019210000
H6.0/20D 6.00 10 20.0 12.0 3.5 6.3 0.2 0.3 14.0 l yellow T 20A 022 A 100 9019220000
H6.0/26D 6.00 10 26.0 18.0 3.5 6.3 0.2 0.3 20.0 l yellow T 20A 023 A 100 9019230000
H10.0/22D 10.00 7 22.0 12.0 4.5 7.6 0.2 0.4 15.0 l red T 20A 024 A 100 9019240000
H10.0/28D 10.00 7 28.0 18.0 4.5 7.6 0.2 0.4 21.0 l red T 20A 025 A 100 9019250000
H16.0/22D 16.00 6 22.0 12.0 5.8 8.8 0.2 0.4 15.0 l blue T 20A 026 A 100 9019260000
H16.0/28D 16.00 6 28.0 18.0 5.8 8.8 0.2 0.4 21.0 l blue T 20A 027 A 100 9019270000
H25.0/30D 25.00 3 30.0 16.0 7.3 11.2 0.2 0.4 18.0 l yellow T 20A 028 A 50 9019280000
H25.0/36D 25.00 3 36.0 22.0 7.3 11.2 0.2 0.4 24.0 l yellow T 20A 030 A 50 9019300000
H35.0/32D 35.00 2 32.0 18.0 8.3 12.7 0.2 0.4 21.0 l red T 20A 032 A 50 9019320000
H35.0/30D 35.00 2 30.0 16.0 8.3 12.7 0.2 0.4 19.0 l red T 20A 031 A 50 9019310000
H35.0/39D 35.00 2 39.0 25.0 8.3 12.7 0.2 0.4 28.0 l red T 20A 033 A 50 9019330000
H50.0/36D 50.00 1 36.0 20.0 10.3 15.0 0.3 0.5 26.0 l blue T 20A 034 A 50 9019340000
H50.0/41D 50.00 1 41.0 25.0 10.3 15.0 0.3 0.5 31.0 l blue T 20A 035 A 50 9019350000
DIN colour code Ordering data
in multipack bag Type ø mm2AWG L1 L2 D1 D2 S1 S2
Stripping length
Colour VG* Qty. Order No.
H0.5/14D 0.50 20 14.0 8.0 1.0 2.6 0.15 0.25 10.0 m white T 20A 002 A 500 9019400000
H0.75/14D 0.75 18 14.0 8.0 1.2 2.8 0.15 0.25 10.0 l grey T 20A 005 A 500 9019410000
H1.0/14D 1.00 17 14.0 8.0 1.4 3.0 0.15 0.25 10.0 l red T 20A 009 A 500 9019420000
H1.5/14D 1.50 16 14.0 8.0 1.7 3.5 0.15 0.25 10.0 l black T 20A 012 A 500 9019430000
H2.5/15 2.50 14 15.0 8.0 2.2 4.2 0.15 0.25 10.0 l blue T 20A 016 A 500 9026100000
H4.0/18 4.00 12 18.0 10.0 2.8 4.8 0.2 0.3 12.0 l grey 019 A 250 9026010000
DIN colour code Ordering data
Strip of wire end ferrules Type ø mm2AWG L1 L2 D1 D2 S1 S2
Stripping length
Colour Qty. Order No.
H0.5/14D 0.50 20 14.0 8.0 1.0 2.6 0.15 0.25 10.0 m white T 20A 002 A 500 9004280000
H0.75/14D 0.75 18 14.0 8.0 1.2 2.8 0.15 0.25 10.0 l grey T 20A 005 A 500 9004300000
H1.0/14D 1.00 17 14.0 8.0 1.4 3.0 0.15 0.25 10.0 l red T 20A 009 A 500 9004330000
H1.5/14D 1.50 16 14.0 8.0 1.7 3.2 0.15 0.25 10.0 l black T 20A 012 A 500 9004350000
H2.5/14D 2.50 14 14.0 8.0 2.2 4.0 0.15 0.25 11.0 l blue T 20A 016 A 500 9004360000
VG* = Military designation according to VG 96933-20
L2
L1
ø D1
S1
ø D2
S2
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a not readily flammable material on request
For conductors from 0.5 to 50 mm2 (AWG 20-1)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
J.7
Accessories
J
Wire end ferrules with plastic collar
DIN colour code Ordering data
Reel of wire end ferrules Type ø mm2AWG L1 L2 D1 D2 S1 S2
Stripping length
Colour VG* Qty. Order No.
H0.5/14D 0.50 20 14.0 8.0 1.0 2.6 0.15 0.25 10.0 m white 5000 9005860000
H0.75/14D 0.75 18 14.0 8.0 1.2 2.8 0.15 0.25 10.0 l grey 5000 9005870000
H1.0/14D 1.00 17 14.0 8.0 1.4 3.0 0.15 0.25 11.0 l red 5000 9005880000
H1.5/14D 1.50 16 14.0 8.0 1.7 3.2 0.15 0.25 10.0 l black 5000 9005890000
H2.5/14D 2.50 14 14.0 8.0 2.2 4.0 0.15 0.25 11.0 l blue 3000 9005850000
L2
L1
ø D1
S1
ø D2
S2
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a not readily flammable material on request
For conductors from 0.5 to 2.5 mm2 (AWG 20-14)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
J.8
Accessories
J
Wire end ferrules with plastic collar
other colour code Ordering data
packed loose Type ø mm2AWG L1 L2 D1 D2 S1 S2
Stripping length
Colour Qty. Order No.
H0.25/10T 0.25 24 10.0 6.0 0.8 1.8 0.15 0.25 8.0 l yellow 500 9021010000
H0.25/12T 0.25 24 12.0 8.0 0.8 1.8 0.15 0.25 10.0 l yellow 500 9021020000
H0.5/12D 0.50 20 12.0 6.0 1.0 2.6 0.15 0.25 8.0 m white 500 9019000000
H0.5/14D 0.50 20 14.0 8.0 1.0 2.6 0.15 0.25 10.0 m white 500 9019010000
H0.5/16D 0.50 20 16.0 10.0 1.0 2.6 0.15 0.25 12.0 m white 500 9019020000
H0.75/12T 0.75 18 12.0 6.0 1.2 2.8 0.15 0.25 8.0 l light blue 500 9021030000
H0.75/14 0.75 18 14.0 8.0 1.2 2.8 0.15 0.25 10.0 l light blue 500 9021040000
H0.75/16T 0.75 18 16.0 10.0 1.2 2.8 0.15 0.25 12.0 l light blue 500 9021050000
H0.75/18T 0.75 18 18.0 12.0 1.2 2.8 0.15 0.25 14.0 l light blue 500 9021060000
H1.0/12D 1.00 17 12.0 6.0 1.4 3.0 0.15 0.25 8.0 l red 500 9019070000
H1.0/14D 1.00 17 14.0 8.0 1.4 3.0 0.15 0.25 10.0 l red 500 9019080000
H1.0/16D 1.00 17 16.0 10.0 1.4 3.0 0.15 0.25 12.0 l red 500 9019100000
H1.0/18D 1.00 17 18.0 12.0 1.4 3.0 0.15 0.25 15.0 l red 500 9019110000
H1.5/14D 1.50 16 14.0 8.0 1.7 3.5 0.15 0.25 10.0 l black 500 9019120000
H1.5/16D 1.50 16 16.0 10.0 1.7 3.5 0.15 0.25 12.0 l black 500 9019130000
H1.5/18D 1.50 16 18.0 12.0 1.7 3.5 0.15 0.25 15.0 l black 500 9019140000
H1.5/24D 1.50 16 24.0 18.0 1.7 3.5 0.15 0.25 20.0 l black 500 9019150000
H2.5/15T 2.50 14 15.0 8.0 2.2 4.2 0.15 0.25 10.0 l grey 500 9021070000
H2.5/19T 2.50 14 19.0 12.0 2.2 4.2 0.15 0.25 14.0 l grey 500 9021080000
H2.5/25T 2.50 14 25.0 18.0 2.2 4.2 0.15 0.25 20.0 l grey 500 9021090000
H4.0/18T 4.00 12 18.0 10.0 2.8 4.8 0.2 0.3 12.0 l orange 500 9021100000
H4.0/20T 4.00 12 20.0 12.0 2.8 4.8 0.2 0.3 14.0 l orange 500 9021110000
H4.0/26T 4.00 12 26.0 18.0 2.8 4.8 0.2 0.3 20.0 l orange 100 9021120000
H6.0/20T 6.00 10 20.0 12.0 3.5 6.3 0.2 0.3 14.0 l green 100 9021130000
H6.0/26T 6.00 10 26.0 18.0 3.5 6.3 0.2 0.3 20.0 l green 100 9021140000
H10.0/22T 10.00 7 22.0 12.0 4.5 7.6 0.2 0.4 15.0 l brown 100 9021150000
H10.0/28T 10.00 7 28.0 18.0 4.5 7.6 0.2 0.4 21.0 l brown 100 9021160000
H16.0/22T 16.00 6 22.0 12.0 5.8 8.8 0.2 0.4 15.0 m white 100 9021170000
H16.0/28T 16.00 6 28.0 18.0 5.8 8.8 0.2 0.4 21.0 m white 100 9021180000
H25.0/30T 25.00 3 30.0 16.0 7.3 11.2 0.2 0.4 18.0 l black 50 9021190000
H25.0/36T 25.00 3 36.0 22.0 7.3 11.2 0.2 0.4 24.0 l black 50 9021200000
other colour code Ordering data
in multipack bag Type ø mm2AWG L1 L2 D1 D2 S1 S2
Stripping length
Colour Qty. Order No.
H0.14/10T 0.14 26 10.0 6.0 0.6 1.5 0.15 0.25 8.0 l brown 500 9028250000
H0.25/10T 0.25 24 10.0 6.0 0.8 1.8 0.15 0.25 8.0 l yellow 500 9021210000
H0.25/12T 0.25 24 12.0 8.0 0.8 1.8 0.15 0.25 10.0 l yellow 500 9021220000
H0.5/14D 0.50 20 14.0 8.0 1.0 2.6 0.15 0.25 10.0 m white 500 9019400000
H0.75/14T 0.75 18 14.0 8.0 1.2 2.8 0.15 0.25 10.0 l light blue 500 9021230000
H1.0/14D 1.00 17 14.0 8.0 1.4 3.0 0.15 0.25 10.0 l red 500 9019420000
H1.5/14D 1.50 16 14.0 8.0 1.7 3.5 0.15 0.25 10.0 l black 500 9019430000
H1.5/24D 1.50 16 24.0 18.0 1.7 3.5 0.15 0.25 20.0 l black 500 9004140000
H2.5/15T 2.50 14 15.0 8.0 2.2 4.2 0.15 0.25 10.0 l grey 500 9021240000
H4.0/18T 4.00 12 18.0 10.0 2.8 4.8 0.2 0.3 12.0 l orange 250 9021250000
other colour code Ordering data
Strip of wire end ferrules Type ø mm2AWG L1 L2 D1 D2 S1 S2
Stripping length
Colour Qty. Order No.
H0.5/14D 0.50 20 14.0 8.0 1.0 2.6 0.15 0.25 10.0 m white 500 9004280000
H0.75/14T 0.75 18 14.0 8.0 1.2 2.8 0.15 0.25 10.0 l light blue 500 9004310000
H1.0/14D 1.00 17 14.0 8.0 1.4 3.0 0.15 0.25 10.0 l red 500 9004330000
H1.5/14D 1.50 16 14.0 8.0 1.7 3.2 0.15 0.25 10.0 l black 500 9004350000
H2.5/14T 2.50 14 14.0 8.0 2.2 4.0 0.15 0.25 11.0 l grey 500 9004370000
L2
L1
ø D1
S1
ø D2
S2
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a not readily flammable material on request
For conductors from 0.14 to 25 mm2 (AWG 26-3)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
J.9
Accessories
J
Wire end ferrules with plastic collar
other colour code Ordering data
Reel of wire end ferrules Type ø mm2AWG L1 L2 D1 D2 S1 S2
Stripping length
Colour Qty. Order No.
H0.5/14D 0.50 20 14.0 8.0 1.0 2.6 0.15 0.25 10.0 m white 5000 9005860000
H0.75/14T 0.75 18 14.0 8.0 1.2 2.8 0.15 0.25 10.0 l light blue 5000 9005900000
H1.0/14D 1.00 17 14.0 8.0 1.4 3.0 0.15 0.25 11.0 l red 5000 9005880000
H1.5/14D 1.50 16 14.0 8.0 1.7 3.2 0.15 0.25 10.0 l black 5000 9005890000
H2.5/14T 2.50 14 14.0 8.0 2.2 4.0 0.15 0.25 11.0 l grey 3000 9005910000
L2
L1
ø D1
S1
ø D2
S2
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a not readily flammable material on request
For conductors from 0.5 to 2.5 mm2 (AWG 20-14)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
J.10
Accessories
J
Twin-wire end ferrules with plastic collar
Weidmüller colour code Ordering data
packed loose Type ø mm2AWG L1 L2 D1 S1 S2 A B
Stripping length
Colour Qty. Order No.
H0.5/14 0.50 20 14.0 8.0 1.4 0.15 0.3 5.0 3.0 11.0 l orange 500 9037200000
H0.5/16 0.50 20 16.0 10.0 1.4 0.15 0.3 5.0 3.0 13.0 l orange 500 9037210000
H0.5/18 0.50 20 18.0 12.0 1.4 0.15 0.3 5.0 3.0 15.0 l orange 500 9037220000
H0.75/14 0.75 18 14.0 8.0 1.7 0.15 0.3 5.5 3.0 11.0 m white 500 9037230000
H0.75/16 0.75 18 16.0 10.0 1.7 0.15 0.3 5.5 3.0 13.0 m white 500 9037240000
H0.75/19S 0.75 18 19.0 12.0 1.4 0.15 0.3 5.5 3.0 21.0 m white 500 9202820000
H0.75/24 0.75 18 24.0 18.0 1.7 0.15 0.3 5.5 3.0 21.0 m white 500 9037250000
H1.0/15 1.00 17 15.0 8.0 2.0 0.15 0.3 5.8 3.2 12.0 l yellow 500 9037260000
H1.0/15S 1.00 17 16.0 8.0 2.2 0.15 0.3 5.8 3.2 12.0 l yellow 500 9018690000
H1.0/19 1.00 17 19.0 12.0 2.0 0.15 0.3 5.8 3.2 16.0 l yellow 500 9037270000
H1.0/25 1.00 17 25.0 18.0 2.0 0.15 0.3 5.8 3.2 22.0 l yellow 500 9037280000
H1.5/16 1.50 16 16.0 8.2 2.2 0.15 0.3 6.5 3.6 11.0 l red 500 9037290000
H1.5/20 1.50 16 20.0 12.0 2.2 0.15 0.3 6.5 3.6 15.0 l red 500 9037300000
H1.5/26 1.50 16 26.0 18.0 2.2 0.15 0.3 6.5 3.6 21.0 l red 100 9037310000
H2.5/19D 2.50 14 19.0 10.0 2.8 0.15 0.4 8.0 4.5 13.0 l blue 500 9037500000
H2.5/21D 2.50 14 21.0 12.0 2.8 0.15 0.4 8.0 4.5 15.0 l blue 100 9037510000
H2.5/27D 2.50 14 27.0 18.0 2.8 0.15 0.4 8.0 4.5 21.0 l blue 100 9037520000
H4.0/22D 4.00 12 22.0 12.0 3.5 0.2 0.5 9.0 5.2 15.0 l grey 100 9037530000
H4.0/28D 4.00 12 28.0 18.0 3.5 0.2 0.5 9.0 5.2 21.0 l grey 100 9037540000
H6.0/23 6.00 10 23.0 12.0 4.5 0.2 0.5 11.4 6.2 20.0 l black 100 9037320000
H6.0/29 6.00 10 29.0 18.0 4.5 0.2 0.5 11.4 6.2 24.0 l black 100 9037330000
H10.0/24S 10.00 7 24.0 12.0 6.5 0.2 0.5 13.4 7.6 17.0 l ivory 100 9018860000
H10.0/24 10.00 7 24.0 12.0 5.8 0.2 0.5 13.4 7.6 17.0 l ivory 100 9037340000
H10.0/30 10.00 7 30.0 18.0 5.8 0.2 0.5 13.4 7.6 23.0 l ivory 100 9037350000
H10.0/30S 10.00 7 30.0 18.0 6.5 0.2 0.5 13.4 7.6 23.0 l ivory 100 9018870000
H16.0/29 16.00 6 29.0 16.0 8.3 0.3 0.6 17.2 9.5 20.0 l green 50 9037360000
H16.0/38 16.00 6 38.0 25.0 8.3 0.3 0.6 17.2 9.5 29.0 l green 50 9037370000
Weidmüller colour code Ordering data
in multipack bag Type ø mm2AWG L1 L2 D1 S1 S2 A B
Stripping length
Colour Qty. Order No.
H0.5/14 0.50 20 14.0 8.0 1.4 0.15 0.3 5.0 3.0 11.0 l orange 500 9004440000
H0.75/14 0.75 18 14.0 8.0 1.7 0.15 0.3 5.5 3.0 11.0 m white 500 9018510000
H0.75/16 0.75 18 16.0 10.0 1.7 0.15 0.3 5.5 3.0 13.0 m white 500 9004900000
H1.0/15 1.00 17 15.0 8.0 2.0 0.15 0.3 5.8 3.2 12.0 l yellow 500 9018530000
H1.0/15S 1.00 17 16.0 8.0 2.2 0.15 0.3 5.8 3.2 12.0 l yellow 500 9018650000
H1.0/19 1.00 17 19.0 12.0 2.0 0.15 0.3 5.8 3.2 16.0 l yellow 500 9004910000
H1.5/16 1.50 16 16.0 8.2 2.2 0.15 0.3 6.5 3.6 11.0 l red 500 9004410000
H1.5/20 1.50 16 20.0 12.0 2.2 0.15 0.3 6.5 3.6 15.0 l red 500 9004920000
H2.5/19D 2.50 14 19.0 10.0 2.8 0.15 0.4 8.0 4.5 13.0 l blue 250 9004430000
H2.5/21D 2.50 14 21.0 12.0 2.8 0.15 0.4 8.0 4.5 15.0 l blue 250 9004740000
H4.0/22D 4.00 12 22.0 12.0 3.5 0.2 0.5 9.0 5.2 15.0 l grey 100 9004730000
H6.0/23 6.00 10 23.0 12.0 4.5 0.2 0.5 11.4 6.2 20.0 l black 100 9004930000
H10.0/24 10.00 7 24.0 12.0 5.8 0.2 0.5 13.4 7.6 17.0 l ivory 100 9004940000
L2
L1
D1
S2
S1
B
A
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a not readily flammable material on request
For conductors from 2 No. 0.5 to 2 No. 16 mm2 (2 No. AWG 20 to 2 No. AWG 6)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
J.11
Accessories
J
Twin-wire end ferrules with plastic collar
DIN colour code Ordering data
packed loose Type ø mm2AWG L1 L2 D1 S1 S2 A B
Stripping length
Colour Qty. Order No.
H0.5/14D 0.50 20 14.0 8.0 1.4 0.15 0.3 5.0 3.0 11.0 m white 500 9037380000
H0.5/16D 0.50 20 16.0 10.0 1.4 0.15 0.3 5.0 3.0 13.0 m white 500 9037390000
H0.5/18D 0.50 20 18.0 12.0 1.4 0.15 0.3 5.0 3.0 15.0 m white 500 9037400000
H0.75/14D 0.75 18 14.0 8.0 1.7 0.15 0.3 5.5 3.0 11.0 l grey 500 9037410000
H0.75/16D 0.75 18 16.0 10.0 1.7 0.15 0.3 5.5 3.0 13.0 l grey 500 9037420000
H0.75/19DS 0.75 18 19.0 12.0 1.4 0.15 0.3 5.5 3.0 21.0 l grey 500 9202830000
H0.75/24D 0.75 18 24.0 18.0 1.7 0.15 0.3 5.5 3.0 21.0 l grey 500 9037430000
H1.0/15D 1.00 17 15.0 8.0 2.0 0.15 0.3 5.8 3.2 12.0 l red 500 9037440000
H1.0/19D 1.00 17 19.0 12.0 2.0 0.15 0.3 5.8 3.2 16.0 l red 500 9037450000
H1.0/25D 1.00 17 25.0 18.0 2.0 0.15 0.3 5.8 3.2 22.0 l red 500 9037460000
H1.5/16D 1.50 16 16.0 8.0 2.2 0.15 0.3 6.5 3.6 11.0 l black 500 9037470000
H1.5/20D 1.50 16 20.0 12.0 2.2 0.15 0.3 6.5 3.6 15.0 l black 500 9037480000
H1.5/26D 1.50 16 26.0 18.0 2.2 0.15 0.3 6.5 3.6 21.0 l black 100 9037490000
H2.5/19D 2.50 14 19.0 10.0 2.8 0.15 0.4 8.0 4.5 13.0 l blue 500 9037500000
H2.5/21D 2.50 14 21.0 12.0 2.8 0.15 0.4 8.0 4.5 15.0 l blue 100 9037510000
H2.5/27D 2.50 14 27.0 18.0 2.8 0.15 0.4 8.0 4.5 21.0 l blue 100 9037520000
H4.0/22D 4.00 12 22.0 12.0 3.5 0.2 0.5 9.0 5.2 15.0 l grey 100 9037530000
H4.0/28D 4.00 12 28.0 18.0 3.5 0.2 0.5 9.0 5.2 21.0 l grey 100 9037540000
H6.0/23D 6.00 10 23.0 12.0 4.5 0.2 0.5 11.4 6.2 20.0 l yellow 100 9037550000
H6.0/29D 6.00 10 29.0 18.0 4.5 0.2 0.5 11.4 6.2 24.0 l yellow 100 9037560000
H10.0/24DS 10.00 7 24.0 12.0 6.5 0.2 0.5 13.4 7.6 17.0 l red 100 9018880000
H10.0/24D 10.00 7 24.0 12.0 5.8 0.2 0.5 13.4 7.6 17.0 l red 100 9037570000
H10.0/30D 10.00 7 30.0 18.0 5.8 0.2 0.5 13.4 7.6 23.0 l red 100 9037580000
H10.0/30DS 10.00 7 30.0 18.0 6.5 0.2 0.5 13.4 7.6 23.0 l red 100 9018890000
H16.0/29D 16.00 6 29.0 16.0 8.3 0.3 0.6 17.2 9.5 20.0 l blue 50 9037590000
H16.0/38D 16.00 6 38.0 25.0 8.3 0.3 0.6 17.2 9.5 29.0 l blue 50 9037600000
DIN colour code Ordering data
in multipack bag Type ø mm2AWG L1 L2 D1 S1 S2 A B
Stripping length
Colour Qty. Order No.
H0.5/14D 0.50 20 14.0 8.0 1.4 0.15 0.3 5.0 3.0 11.0 m white 500 9004780000
H0.75/14D 0.75 18 14.0 8.0 1.7 0.15 0.3 5.5 3.0 11.0 l grey 500 9018520000
H0.75/16D 0.75 18 16.0 10.0 1.7 0.15 0.3 5.5 3.0 13.0 l grey 500 9004770000
H1.0/15D 1.00 17 16.0 8.0 2.0 0.15 0.3 5.8 3.2 12.0 l red 500 9018540000
H1.0/19D 1.00 17 19.0 12.0 2.0 0.15 0.3 5.8 3.2 16.0 l red 500 9004760000
H1.5/16D 1.50 16 16.0 8.0 2.2 0.15 0.3 6.5 3.6 11.0 l black 500 9004420000
H1.5/20D 1.50 16 20.0 12.0 2.2 0.15 0.3 6.5 3.6 15.0 l black 500 9004750000
H2.5/19D 2.50 14 19.0 10.0 2.8 0.15 0.4 8.0 4.5 13.0 l blue 250 9004430000
H2.5/21D 2.50 14 21.0 12.0 2.8 0.15 0.4 8.0 4.5 15.0 l blue 250 9004740000
H4.0/22D 4.00 12 22.0 12.0 3.5 0.2 0.5 9.0 5.2 15.0 l grey 100 9004730000
H6.0/23D 6.00 10 23.0 12.0 4.5 0.2 0.5 11.4 6.2 20.0 l yellow 100 9004720000
H10.0/26D 10.00 7 24.0 12.0 5.8 0.2 0.5 13.4 7.6 17.0 l red 100 9004710000
L2
L1
D1
S2
S1
B
A
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a not readily flammable material on request
For conductors from 2 No. 0.5 to 2 No. 16 mm2 (2 No. AWG 20 to 2 No. AWG 6)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
J.12
Accessories
J
Twin-wire end ferrules with plastic collar
other colour code Ordering data
packed loose Type ø mm2AWG L1 L2 D1 S1 S2 A B
Stripping length
Colour Qty. Order No.
H0.5/14 0.50 20 14.0 8.0 1.4 0.15 0.3 5.0 3.0 11.0 l orange 500 9037200000
H0.5/16 0.50 20 16.0 10.0 1.4 0.15 0.3 5.0 3.0 13.0 l orange 500 9037210000
H0.5/18 0.50 20 18.0 12.0 1.4 0.15 0.3 5.0 3.0 15.0 l orange 500 9037220000
H0.75/14T 0.75 18 14.0 8.0 1.7 0.15 0.3 5.5 3.0 11.0 l light blue 500 9037610000
H0.75/16T 0.75 18 16.0 10.0 1.7 0.15 0.3 5.5 3.0 13.0 l light blue 500 9037620000
H0.75/19TS 0.75 18 19.0 12.0 1.4 0.15 0.3 5.5 3.0 21.0 l light blue 500 9202840000
H0.75/24T 0.75 18 24.0 18.0 1.7 0.15 0.3 5.5 3.0 21.0 l light blue 500 9037630000
H1.0/15D 1.00 17 15.0 8.0 2.0 0.15 0.3 5.8 3.2 12.0 l red 500 9037440000
H1.0/19D 1.00 17 19.0 12.0 2.0 0.15 0.3 5.8 3.2 16.0 l red 500 9037450000
H1.0/25D 1.00 17 25.0 18.0 2.0 0.15 0.3 5.8 3.2 22.0 l red 500 9037460000
H1.5/16D 1.50 16 16.0 8.0 2.2 0.15 0.3 6.5 3.6 11.0 l black 500 9037470000
H1.5/20D 1.50 16 20.0 12.0 2.2 0.15 0.3 6.5 3.6 15.0 l black 500 9037480000
H1.5/26D 1.50 16 26.0 18.0 2.2 0.15 0.3 6.5 3.6 21.0 l black 100 9037490000
H2.5/19T 2.50 14 19.0 10.0 2.8 0.15 0.4 8.0 4.5 13.0 l grey 500 9037640000
H2.5/21T 2.50 14 21.0 12.0 2.8 0.15 0.4 8.0 4.5 15.0 l grey 100 9037650000
H2.5/27T 2.50 14 27.0 18.0 2.8 0.15 0.4 8.0 4.5 21.0 l grey 100 9037660000
H4.0/22T 4.00 12 22.0 12.0 3.5 0.2 0.5 9.0 5.2 15.0 l orange 100 9037670000
H4.0/28T 4.00 12 28.0 18.0 3.5 0.2 0.5 9.0 5.2 21.0 l orange 100 9037680000
H6.0/23T 6.00 10 23.0 12.0 4.5 0.2 0.5 11.4 6.2 20.0 l green 100 9037690000
H6.0/29T 6.00 10 29.0 18.0 4.5 0.2 0.5 11.4 6.2 24.0 l green 100 9037700000
H10.0/24T 10.00 7 24.0 12.0 5.8 0.2 0.5 13.4 7.6 17.0 l brown 100 9037710000
H10.0/30T 10.00 7 30.0 18.0 5.8 0.2 0.5 13.4 7.6 23.0 l brown 100 9037720000
H16.0/29T 16.00 6 29.0 16.0 8.3 0.3 0.6 17.2 9.5 20.0 m white 50 9037730000
H16.0/38T 16.00 6 38.0 25.0 8.3 0.3 0.6 17.2 9.5 29.0 m white 50 9037740000
other colour code Ordering data
in multipack bag Type ø mm2AWG L1 L2 D1 S1 S2 A B
Stripping length
Colour Qty. Order No.
H0.75/16T 0.75 18 16.0 10.0 1.7 0.15 0.3 5.5 3.0 13.0 l light blue 500 9005140000
H1.0/15D 1.00 17 16.0 8.0 2.0 0.15 0.3 5.8 3.2 12.0 l red 500 9018540000
H1.0/19D 1.00 17 19.0 12.0 2.0 0.15 0.3 5.8 3.2 16.0 l red 500 9004760000
H1.5/16D 1.50 16 16.0 8.0 2.2 0.15 0.3 6.5 3.6 11.0 l black 500 9004420000
H1.5/20D 1.50 16 20.0 12.0 2.2 0.15 0.3 6.5 3.6 15.0 l black 500 9004750000
H2.5/19T 2.50 14 19.0 10.0 2.8 0.15 0.4 8.0 4.5 13.0 l grey 250 9018580000
H2.5/21 2.50 14 21.0 12.0 2.8 0.15 0.4 8.0 4.5 15.0 l grey 250 9005150000
H4.0/22T 4.00 12 22.0 12.0 3.5 0.2 0.5 9.0 5.2 15.0 l orange 100 9018590000
H6.0/23T 6.00 10 23.0 12.0 4.5 0.2 0.5 11.4 6.2 20.0 l green 100 9005160000
H10.0/26T 10.00 7 24.0 12.0 5.8 0.2 0.5 13.4 7.6 17.0 l brown 100 9005170000
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a not readily flammable material on request
For conductors from 2 No. 0.5 to 2 No. 16 mm2 (2 No. AWG 20 to 2 No. AWG 6)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
L2
L1
D1
S2
S1
B
A
J.13
Accessories
J
Wire end ferrules for short-circuit and earth-fault-proof cables
Weidmüller colour code Ordering data
packed loose Type ø mm2AWG L1 L2 D1 D2 S1 S2
Stripping length
Colour Qty. Order No.
H1.5/17.5 XS 1.50 16 17.5 8.0 1.8 6.8 0.15 0.3 20.0 l black 100 9202870000
H2.5/17.5 XS 2.50 14 17.5 8.0 2.3 7.6 0.15 0.3 20.0 l blue 100 9202880000
Weidmüller colour code Ordering data
in multipack bag Type ø mm2AWG L1 L2 D1 D2 S1 S2
Stripping length
Colour Qty. Order No.
H1.5/17.5X 1.50 16 17.5 8.0 1.8 6.8 0.15 0.3 13.0 l black 100 9006590000
H1.5/19.5X 1.50 16 19.5 10.0 1.8 6.8 0.15 0.3 15.0 l black 100 9006630000
H2.5/17.5X 2.50 14 17.5 8.0 2.3 7.6 0.15 0.3 14.0 l blue 100 9006670000
H2.5/21.5X 2.50 14 21.5 12.0 2.3 7.6 0.15 0.3 17.0 l blue 100 9006710000
H4.0/19.5X 4.00 12 19.5 10.0 2.9 7.8 0.2 0.3 14.0 l grey 100 9006750000
H6.0/23.0X 6.00 10 23.0 12.0 3.6 8.1 0.2 0.3 17.0 l yellow 100 9006790000
H10.0/24.0X 10.00 7 24.0 12.0 4.6 9.6 0.2 0.3 17.0 l red 100 9006830000
H16.0/25.5X 16.00 6 25.5 12.0 6.0 11.9 0.2 0.3 26.0 l blue 100 9006870000
L2
L1
ø D1
S1
ø D2
S2
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a not readily flammable material on request
For conductors from 1.5 to 16 mm2 (AWG 16-6)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
J.14
Accessories
J
Wire end ferrules with plastic collar, special sizes
Weidmüller colour code Ordering data
packed loose Type ø mm2AWG L1 L2 D1 D2 S1 S2
Stripping length
Colour Qty. Order No.
H0.34/11S 0.34 22 11.0 6.0 0.8 2.6 0.15 0.40 6.0 l turquoise 500 9204090000
H0.5/14S 0.50 20 14.0 8.0 1.0 2.9 0.15 0.25 10.0 l orange 500 9004560000
H0.5/14DS 0.50 20 14.0 8.0 1.0 2.9 0.15 0.25 10.0 m white 500 9004590000
H0.5/16DS 0.50 20 16.0 10.0 1.0 2.9 0.15 0.25 12.0 m white 500 9202910000
H0.5/16S 0.50 20 16.0 10.0 1.0 2.9 0.15 0.25 12.0 l orange 500 9202900000
H0.75/14S 0.75 18 14.0 8.0 1.2 3.4 0.15 0.25 10.0 m white 500 9025960000
H0.75/14DS 0.75 18 14.0 8.0 1.2 3.4 0.15 0.25 10.0 m white 500 9028580000
H0.75/14TS 0.75 18 14.0 8.0 1.2 3.4 0.15 0.25 10.0 l light blue 500 9018550000
H0.75/15S 0.75 18 15.0 9.0 1.2 2.8 0.15 0.25 10.0 m white 500 9204240000
H1.0/14S 1.00 17 14.0 8.0 1.4 3.5 0.15 0.25 10.0 l yellow 500 9025970000
H1.0/14DS 1.00 17 14.0 8.0 1.4 3.5 0.15 0.25 10.0 l red 500 9018560000
H1.5/12S 1.50 16 12.0 6.0 1.7 3.5 0.15 0.25 8.0 l red 500 9025690000
H1.5/14S 1.50 16 14.0 8.0 1.7 3.9 0.15 0.25 10.0 l red 500 9025980000
H1.5/14DS 1.50 16 14.0 8.0 1.7 3.9 0.15 0.25 10.0 l black 500 9025240000
H2.5/12DS 2.50 14 12.0 6.0 2.2 4.2 0.15 0.25 8.0 l blue 500 9028490000
H2.5/12TS 2.50 14 12.0 6.0 2.2 4.2 0.15 0.25 8.0 l grey 500 9036200000
H2.5/14S 2.50 14 14.0 8.0 2.2 4.0 0.15 0.25 10.0 l blue 500 1333100000
H2.5/14TS 2.50 14 14.0 8.0 2.2 4.0 0.15 0.25 10.0 l grey 500 9426770000
H2.5/16DS 2.50 14 16.0 10.0 2.2 4.2 0.15 0.25 13.0 l blue 500 9036220000
H4.0/20D 4.00 12 20.0 12.0 2.8 4.7 0.20 0.50 15.0 l grey 500 9203630000
H10.0/22 10.00 7 22.0 12.0 4.5 7.1 0.20 0.60 15.0 l ivory 100 9203620000
Weidmüller colour code Ordering data
in multipack bag Type ø mm2AWG L1 L2 D1 D2 S1 S2
Stripping length
Colour Qty. Order No.
H0.75/14S 0.75 18 14.0 8.0 1.2 3.4 0.15 0.25 10.0 m white 500 9025700000
H1.0/14S 1.00 17 14.0 8.0 1.4 3.5 0.15 0.25 10.0 l yellow 500 9025710000
H1.5/14DS 1.50 16 14.0 8.0 1.7 3.9 0.15 0.25 10.0 l black 500 9028360000
H1.5/14S 1.50 16 14.0 8.0 1.7 3.9 0.15 0.25 10.0 l red 500 9025720000
L2
L1
ø D1
S1
ø D2
S2
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a not readily flammable material on request
For conductors from 0.5 to 2.5 mm2 (AWG 20-14)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
J.15
Accessories
J
Wire end ferrules without plastic collar
without plastic collar Ordering data
packed loose Type ø mm2AWG L1 L2 D1 D2 S1 S2
Stripping length
Colour Qty. Order No.
H0.25/5 0.25 24 5.0 0.8 1.6 5.0 1000 9018910000
H0.5/10 0.50 20 10.0 1.0 2.1 10.0 1000 9004050000
H0.5/6 0.50 20 6.0 1.0 2.1 6.0 1000 0282600000
H0.75/10 0.75 18 10.0 1.2 2.3 10.0 1000 0542500000
H0.75/6 0.75 18 6.0 1.2 2.3 6.0 1000 0282700000
H1.0/10 1.00 17 10.0 1.4 2.5 10.0 1000 0282800000
H1.0/6 1.00 17 6.0 1.4 2.5 6.0 1000 0372600000
H1.5/7 1.50 16 7.0 1.7 2.8 7.0 1000 0372700000
H1.5/10 1.50 16 10.0 1.7 2.8 10.0 1000 0186500000
H1.5/12 1.50 16 12.0 1.7 2.8 12.0 1000 9004060000
H1.5/18 1.50 16 18.0 1.7 2.8 18.0 1000 9004070000
H2.5/7 2.50 14 7.0 2.2 3.4 7.0 1000 0373000000
H2.5/10 2.50 14 10.0 2.2 3.4 10.0 1000 9004080000
H2.5/12 2.50 14 12.0 2.2 3.4 12.0 1000 0186100000
H2.5/18 2.50 14 18.0 2.2 3.4 18.0 1000 9004090000
H4.0/9 4.00 12 9.0 2.8 4.0 9.0 500 0373100000
H4.0/15 4.00 12 15.0 2.8 4.0 15.0 500 9004100000
H4.0/12 4.00 12 12.0 2.8 4.0 12.0 1000 0244100000
H4.0/18 4.00 12 18.0 2.8 4.0 18.0 500 9004110000
H6.0/10 6.00 10 10.0 3.5 4.7 10.0 500 9004120000
H6.0/12 6.00 10 12.0 3.5 4.7 12.0 500 0191900000
H6.0/15 6.00 10 15.0 3.5 4.7 15.0 500 0124700000
H6.0/18 6.00 10 18.0 3.5 4.7 18.0 500 9004130000
H10.0/12 10.00 7 12.0 4.5 5.8 12.0 500 0282900000
H10.0/15 10.00 7 15.0 4.5 5.8 15.0 500 0124800000
H10.0/18 10.00 7 18.0 4.5 5.8 18.0 500 0379300000
H16.0/12 16.00 6 12.0 5.8 7.5 12.0 500 0492500000
H16.0/15 16.00 6 15.0 5.8 7.5 15.0 500 0124300000
H16.0/18 16.00 6 18.0 5.8 7.5 18.0 100 0375200000
H16.0/25 16.00 6 25.0 5.8 7.5 25.0 100 9004150000
H16.0/32 16.00 6 32.0 5.8 7.5 32.0 100 9004160000
H25.0/15 25.00 3 15.0 7.3 9.5 15.0 250 0124400000
H25.0/18 25.00 3 18.0 7.3 9.5 18.0 100 0375300000
H25.0/25 25.00 3 25.0 7.3 9.5 25.0 250 9004170000
H25.0/32 25.00 3 32.0 7.3 9.5 32.0 100 9004180000
H35.0/18 35.00 2 18.0 8.3 11.0 18.0 100 0368900000
H35.0/25 35.00 2 25.0 8.3 11.0 25.0 100 9004190000
H35.0/30 35.00 2 30.0 8.3 11.0 30.0 100 9451000000
H35.0/32 35.00 2 32.0 8.3 11.0 32.0 100 9004200000
H50.0/18 50.00 1 18.0 10.3 13.0 18.0 100 9004210000
H50.0/22 50.00 1 22.0 10.3 13.0 25.0 100 9025880000
H50.0/32 50.00 1 32.0 10.3 13.0 32.0 100 9004220000
H70.0/25 70.00 2/0 25.0 12.5 15.0 25.0 50 9004230000
H70.0/32 70.00 2/0 32.0 12.5 15.0 32.0 50 9004240000
H95.0/25 95.00 3/0 25.0 14.5 17.0 25.0 50 9004250000
H95.0/32 95.00 3/0 32.0 14.5 17.0 32.0 50 9004260000
H120.0/32 120.00 4/0 32.0 17.2 19.0 32.0 25 9036240000
H150.0/32 150.00
300 MCM
32.0 19.5 21.0 32.0 25 9036250000
H185.0/32 185.00
350 MCM
32.0 21.2 23.5 32.0 25 9036260000
For conductors 0.25-185 mm2 (AWG 24-350MCM)
Material: tin-plated copper
Dimensional tolerances to DIN 46228 part 1
J
J.16
0.14...0.75mm² 0.5...2.5mm² ZH 0.5...2.5 mm²
Accessories
Box filled with wire end ferrules with plastic collar:
• in Weidmüller colour code
Assembly
Type Piece
H0.75/14 30
H0.5/14 30
H0.14/10 30
H0.25/10 30
H0.34/10 30
Technical data
Diameter / Height
Weight
92 mm / 25 mm
93 g
Ordering data
Colour code
Type Order No.
Weidmüller H-BOX 0,14-0,75QMM 9025410000
Box filled with wire end ferrules with plastic collar:
• in Weidmüller colour code
• DIN colour code
Assembly
Type Piece
H1.0/14 100
H1.5/14 100
H0.5/14 50
H0.75/14 100
H2.5/14 50
Technical data
Diameter / Height
Weight
92 mm / 40 mm
93 g
Ordering data
Colour code
Type Order No.
Weidmüller H-BOX 0,5-2,5QMM 9025900000
DIN H-BOX 0,5-2,5QMM DIN 9025430000
Box filled with twin wire-end ferrules with plastic
collars:
• in Weidmüller colour code
Assembly
Type Piece
H0.5/15 50
H0.75/15 50
H1.0/15 50
H1.5/16 50
H2.5/18.5 25
Technical data
Diameter / Height
Weight
92 mm / 40 mm
93 g
Ordering data
Colour code
Type Order No.
Weidmüller ZH-BOX 0,5-2,5QMM 9025390000
Assortment of wire end ferrules
J
J.17
4.0...16mm² Empty box
Accessories
Assortment of wire end ferrules
Box filled with wire-end ferrules with plastic
collars:
• in Weidmüller colour code
• DIN colour code
Assembly
Type Piece
H6.0/20 20
H10.0/22 20
H16.0/24 10
H4,0/17 50
Technical data
Diameter / Height
Weight
92 mm / 40 mm
93 g
Ordering data
Colour code
Type Order No.
Weidmüller H-BOX 4,0-16,0QMM 9025920000
DIN H-BOX 4,0-16,0QMM DIN 9025400000
Empty box for wire-end ferrules with
• 4 dividers
• 5 dividers
• 5 coloured inserts
Technical data
Diameter / Height
Weight
92 mm / 40 mm
Colour code
Type Order No.
Empty box EMPTY BOX 4 DIVERS 9025420000
Empty box EMPTY BOX 5 INSERTS 9025940000
Empty box EMPTY BOX 5 DIVERS 9025680000
J.18
Accessories
J
Insulated cable connectors, PVC, with conical cable entry
Ring cable connector Ordering data
Type
Cross-section mm2
Colour Dimensions d1d D L b S1* Qty. Order No.
LIR 1.5M3 V 0.5 - 1.5 l M 3 3.2 5.5 4.0 16.05 11.3 0.75 100 9200070000
LIR 1.5M3.5 V 0.5 - 1.5 l M 3.5 3.7 5.5 4.0 16.05 11.3 0.75 100 9200080000
LIR 1.5M4 V 0.5 - 1.5 l M 4 4.3 8.0 4.0 18.3 11.3 0.75 100 9200090000
LIR 1.5M5 V 0.5 - 1.5 l M 5 5.3 8.0 4.0 18.3 11.3 0.75 100 9200100000
LIR 1.5M6 V 0.5 - 1.5 l M 6 6.4 11.6 4.0 21.0 11.3 0.75 100 9200110000
LIR 1.5M8 V 0.5 - 1.5 l M 8 8.4 11.6 4.0 21.0 11.3 0.75 100 9200120000
LIR 2.5M3 V 1.5 - 2.5 l M 3 3.2 6.4 4.5 15.6 11.3 0.8 100 9200150000
LIR 2.5M3.5 V 1.5 - 2.5 l M 3.5 3.7 6.4 4.5 15.6 11.3 0.8 100 9200160000
LIR 2.5M4 V 1.5 - 2.5 l M 4 4.4 8.5 4.5 19.05 11.3 0.8 100 9200170000
LIR 2.5M5 V 1.5 - 2.5 l M 5 5.3 8.5 4.5 19.05 11.3 0.8 100 9200180000
LIR 2.5M6 V 1.5 - 2.5 l M 6 6.4 12.0 4.5 22.3 11.3 0.8 100 9200190000
LIR 2.5M8 V 1.5 - 2.5 l M 8 8.4 12.0 4.5 22.3 11.3 0.8 100 9200200000
LIR 2.5M10 V 1.5 - 2.5 l M 10 10.5 14.0 4.5 22.3 11.3 0.8 100 9200210000
LIR 6.0M4 V 4 - 6 l M 4 4.3 9.5 6.4 22.4 14.15 1 100 9200230000
LIR 6M5 V 4 - 6 l M 5 5.3 9.5 6.4 22.4 14.15 1 100 9200240000
LIR 6M6 V 4 - 6 l M 6 6.4 12.0 6.4 24.65 14.15 1 100 9200250000
LIR 6M8 V 4 - 6 l M 8 8.4 15.0 6.4 27.65 14.15 1 100 9200260000
LIR 6.0M10 V 4 - 6 l M 10 10.5 15.0 6.4 27.65 14.15 1 100 9200270000
Fork-type cable connector Ordering data
Type
Cross-section mm2
Colour Dimensions d1d D L b S1* Qty. Order No.
LIS 1.5M3 V 0.5 - 1.5 l M 3 3.2 5.7 4.0 17.8 11.3 0.75 100 9200290000
LIS 1.5M3.5 V 0.5 - 1.5 l M 3.5 3.7 6.4 4.0 17.8 11.3 0.75 100 9200300000
LIS 1.5M4 V 0.5 - 1.5 l M 4 4.3 7.2 4.0 17.8 11.3 0.75 100 9200310000
LIS 1.5M5 V 0.5 - 1.5 l M 5 5.3 8.1 4.0 17.8 11.3 0.75 100 9200320000
LIS 1.5M6 V 0.5 - 1.5 l M 6 6.4 11.0 4.0 21.3 11.3 0.75 100 9200330000
LIS 2.5M3 V 1.5 - 2.5 l M 3 3.2 5.7 4.5 17.8 11.3 0.8 100 9200350000
LIS 2.5M3.5 V 1.5 - 2.5 l M 3.5 3.7 6.4 4.5 17.8 11.3 0.8 100 9200360000
LIS 2.5M4 V 1.5 - 2.5 l M 4 4.3 7.2 4.5 17.8 11.3 0.8 100 9200370000
LIS 2.5M5 V 1.5 - 2.5 l M 5 5.3 8.1 4.5 17.8 11.3 0.8 100 9200380000
LIS 2.5M6 V 1.5 - 2.5 l M 6 6.4 11.0 4.5 21.3 11.3 0.8 100 9200390000
LIS 6.0M4 V 4 - 6 l M 4 4.3 9.0 6.4 21.35 14.15 1 100 9200410000
LIS 6.0M5 V 4 - 6 l M 5 5.3 9.0 6.4 21.35 14.15 1 100 9200420000
LIS 6.0M6 V 4 - 6 l M 6 6.4 12.0 6.4 25.15 14.15 1 100 9200430000
LIS 6.0M8 V 4 - 6 l M 8 8.4 14 6.5 34 13.15 1 100 9200440000
LIS 6.0M10 V 4 - 6 l M 10 10.5 18 6.5 34.7 13.15 1 100 9200450000
Pin-type cable connector Ordering data
Type
Cross-section mm2
Colour Dimensions D L b f Qty. Order No.
LIP 1.5R12 V 0.5 - 1.5 l 12.0 4 23.3 11.3 1.9 100 9200460000
LIP 2.5R12 V 1.5 - 2.5 l 12.0 4.5 23,3 11.3 1.9 100 9200470000
LIP 6.0R14 V 4 - 6 l 14.0 6.4 28.15 14.5 2.7 100 9200480000
Hook-type cable connector Ordering data
to ESI 50-18 part 2 Type
Cross-section mm2
Colour L1 L2 B Qty. Order No.
HB 1-17 0.25 - 1.5 l27.2 16.75 4.6 100 9036290000
HB 1-13 1.0 - 2.5 l27.2 16.75 3.0 100 9036300000
L1
L2
B
S1* = Connection density
J.19
Accessories
J
Insulated cable connectors, PVC, with conical cable entry
Butt connector Ordering data
Type
Cross-section mm2
Colour Dimensions D L Qty. Order No.
LIB 1.5B25 VF 0.5 - 1.5 l24.5 3.8 26 100 9200490000
LIB 2.5B25 VF 1.5 - 2.5 l24.5 4.3 26 100 9200500000
LIB 6.0B26 VF 4 - 6 l26.0 6 26 100 9200510000
Flat blade receptacles Ordering data
with copper sleeve Type
Cross-section mm2
Colour Dimensions d2* d3* D L b w Qty. Order No.
LIF 1.5F288 R 0.5 - 1.5 l 2.8 x 0.8 mm 2.8 0.8 4.0 18.7 10.0 3.8 100 9200520000
LIF 1.5F488 R 0.5 - 1.5 l 4.8 x 0.8 mm 4.8 0.8 4.0 19.2 10.0 5.7 100 9200530000
LIF 1.5F638 R 0.5 - 1.5 l 6.3 x 0.8 mm 6.3 0.8 4.0 20.8 10.0 7.4 100 9200540000
LIF 2.5F488 R 1.5 - 2.5 l 4.8 x 0.8 mm 4.8 0.8 5.0 19.2 10.0 5.7 100 9200550000
LIF 2.5F638 R 1.5 - 2.5 l 6.3 x 0.8 mm 6.3 0.8 5.0 20.8 10.0 7.4 100 9200560000
LIF 6.0F638 R 4 - 6 l 6.3 x 0.8 mm 4.8 0.8 6.8 23.8 13.0 7.4 100 9200570000
Flat blade connector Ordering data
with copper sleeve Type
Cross-section mm2
Colour Dimensions d2* d3* D L b w Qty. Order No.
LIF 1.5M638 R 0.5 - 1.5 l 6.3 x 0.8 mm 6.3 0.8 4.0 20.8 10.0 6.3 100 9200580000
LIF 2.5M638 R 1.5 - 2.5 l 6.3 x 0.8 mm 6.3 0.8 5.0 20.8 10.0 6.3 100 9200590000
LIF 6.0M638 R 4 - 6 l 6.3 x 0.8 mm 6.3 0.8 6.8 23.8 13.0 6.3 100 9200600000
Flat blade receptacles, piggy-back Ordering data
with copper sleeve Type
Cross-section mm2
Colour Dimensions d2* d3* D L b w Qty. Order No.
LIF 1.5T638 R 0.5 - 1.5 l 6.3 x 0.8 mm 6.3 0.8 4.0 20.8 10.0 7.4 100 9200610000
LIF 2.5T638 R 1.5 - 2.5 l 6.3 x 0.8 mm 6.3 0.8 5.8 20.8 10.0 7.4 100 9200620000
LIF 6.0T638 R 4 - 6 l 6.3 x 0.8 mm 6.3 0.8 6.8 23.8 13.0 7.4 100 9200630000
Flat blade receptacles, full insulation Ordering data
with copper sleeve Type
Cross-section mm2
Colour Dimensions d2* d3* D L b w Qty. Order No.
LIF 1.5F638 RF 0.5 - 1.5 l 6.3 x 0.8 mm 6.3 0.8 4.0 22.0 10.5 7.4 100 9200640000
LIF 2.5F638 RF 1.5 - 2.5 l 6.3 x 0.8 mm 6.3 0.8 5.0 22.0 10.5 7.4 100 9200650000
LIF 6.0F638 RF 4 - 6 l 6.3 x 0.8 mm 6.3 0.8 6.8 24.5 13.0 5.7 100 9200660000
d2* = Plug-in width
d3* = Plug-in density
J.20
Accessories
J
Round plug Ordering data
with copper sleeve Type
Cross-section mm2
Colour Dimensions d D L b Qty. Order No.
LID 1.5M4 R 0.5 - 1.5 lØ 4 mm 4.0 4.0 20.8 10.0 100 9200670000
LID 2.5M5 R 1.5 - 2.5 lØ 5 mm 5.0 5.0 20.8 10.0 100 9200680000
LID 6.0M5 R 4 - 6 lØ 5 mm 5.0 5.8 23.8 13.0 100 9200690000
Sockets for round plugs Ordering data
with copper sleeve Type
Cross-section mm2
Colour Dimensions d D L b Qty. Order No.
LID 1.5F4 RF 0.5 - 1.5 l Ø 4 mm 4.0 4.0 23.0 10.5 100 9200700000
LID 2.5F5 RF 1.5 - 2.5 l Ø 5 mm 5.0 5.0 23.0 11.5 100 9200710000
LID 6.0F5 RF 4 - 6 l Ø 5 mm 5.0 5.0 24.0 13.8 100 9200720000
Insulated cable connectors, PVC, with conical cable entry
