LZ (ALZ)
ORDERING INFORMATION
Low profile: 15.7mm height
1a/1c 16A power relay
LZ RELAYS (ALZ)
VDE
Compliance with RoHS Directive
FEATURES
1. Low profile type with height of 15.7
mm
Slim, low profile type with dimensions of
28.8 (L) × 12.5 (W) × 15.7 (H) mm
1.134 (L) × .492 (W) × .618 (H) inch.
2. High insulation resistance
Superior insulation characteristics have
been achieved by maintaining an
insulation distance between coil and
contacts of at least 10 mm for both
creepage distance and clearances.
Furthermore, anti-surge voltage is 10 kV
and higher. (Supports European
reinforced insulation requirement.)
3. Superior heat resistance
Can be used in ambient temperatures up
to 85°C 185°F for the class B and 105°C
221°F for the class F.
4. Low operating power
Power saved with a nominal operating
power of only 400 mW.
5. Conforms to the various safety
standards:
UL/C-UL, VDE approved.
6. Superior heat resistance and
tracking resistance
EN60335-1 GWT compliant (Tested by
VDE) type available
TYPICAL APPLICATIONS
1) Household electrical appliances
TV, CATV, Audio equipment, Microwave
ovens, and Heaters, etc.
2) Office equipment
Copy machines, Packaged air
conditioners, and Vending machines
3) Industrial equipment
Machine tools, Robots, and Temperature
controllers
LZ relays
Contact arrangement
1: 1 Form C
5: 1 Form A (New PC board terminal)
ALZ
Protective construction
1: Flux-resistant type
2: Sealed type
Packing style
W: Carton packing
Coil insulation class
B:
F:
Nominal coil voltage (DC)
05: 5 V 18: 18 V
09: 9 V 24: 24 V
12: 12 V 48: 48 V
Flame resistance and tracking resistance
Nil:
T:
–
EN60335-1 (Conform)
Class B insulation
Class F insulation
Notes: 1. Certified by UL/C-UL and VDE
2. Tube packing type is also available. Please consult us.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
LZ (ALZ)
TYPES
Standard packing: Carton: 100 pcs.; Case: 500 pcs.
Notes: 1. Tube packing type is also available. Please consult us.
2. Carton packing symbol “W” is not marked on the relay.
3. EN60335-1 GWT compliant types available. When ordering, please add suffix “T”.
Ex. ALZ51F12TW
RATING
1. Coil data
2. Specifications
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981.
*3. In order to obtain the full rated life cycles, the relay should be properly vented by removing the vent nib. More detail, please look at caution for NOTES.
*4. Class F type is ambient temperature 105°C 221°F.
*5. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
*Please note that some of the specifications listed above may not comply with overseas standards.
Contact arrangement Coil voltage
Flux-resistant type Sealed type
Class B insulation Class F insulation Class B insulation Class F insulation
Part No. Part No. Part No. Part No.
1 Form C
5 V DC ALZ11B05W ALZ11F05W ALZ12B05W ALZ12F05W
9 V DC ALZ11B09W ALZ11F09W ALZ12B09W ALZ12F09W
12 V DC ALZ11B12W ALZ11F12W ALZ12B12W ALZ12F12W
18 V DC ALZ11B18W ALZ11F18W ALZ12B18W ALZ12F18W
24 V DC ALZ11B24W ALZ11F24W ALZ12B24W ALZ12F24W
48 V DC ALZ11B48W ALZ11F48W ALZ12B48W ALZ12F48W
1 Form A
(New PC board terminal)
5 V DC ALZ51B05W ALZ51F05W ALZ52B05W ALZ52F05W
9 V DC ALZ51B09W ALZ51F09W ALZ52B09W ALZ52F09W
12 V DC ALZ51B12W ALZ51F12W ALZ52B12W ALZ52F12W
18 V DC ALZ51B18W ALZ51F18W ALZ52B18W ALZ52F18W
24 V DC ALZ51B24W ALZ51F24W ALZ52B24W ALZ52F24W
48 V DC ALZ51B48W ALZ51F48W ALZ52B48W ALZ52F48W
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
(at 20°C 68°F)
Max. applied voltage
(at 20°C 68°F)
5 V DC
Max. 70%V
nominal voltage
(Initial)
Min. 10%V
nominal voltage
(Initial)
80 mA 63Ω
400 mW 130%V of
nominal voltage
9 V DC 44.4 mA 203Ω
12 V DC 33.3 mA 360Ω
18 V DC 22.2 mA 810Ω
24 V DC 16.7 mA 1,440Ω
48 V DC 8.3 mA 5,760Ω
Characteristics Item Specifications
Contact
Arrangement 1 Form C, 1 Form A
Contact resistance (Initial) Max. 100 mΩ (By voltage drop 6V DC 1A)
Contact material AgSnO2 type
Rating
Nominal switching capacity (resistive load) 16A 250V AC
Max. switching power (resistive load) 4,000V A
Max. switching voltage 440V AC
Max. switching current 16A
Nominal operating power 400mW
Min. switching capacity*1100mA 5V DC
Electrical
characteristics
Insulation resistance (Initial) Min. 1,000 MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section.
Breakdown voltage
(Initial)
Between open contacts 1,000 Vrms for 1 min. (Detection current: 10mA)
Between contacts and coil 5,000 Vrms for 1 min. (Detection current: 10mA)
Temperature rise (coil) Max. 55°C 131°F
[with nominal coil voltage and at 16A contact carrying current (resistance method) at 20°C 68°F]
Surge breakdown voltage*2
(Between contacts and coil) (Initial) 10,000 V
Operate time (at nominal voltage) (at 20°C 68°F) Max. 15ms (excluding contact bounce time)
Release time (at nominal voltage) (at 20°C 68°F) Max. 5ms (excluding contact bounce time, without diode)
Mechanical
characteristics
Shock resistance Functional 100 m/s2 (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Destructive 1,000 m/s2 (Half-wave pulse of sine wave: 6ms)
Vibration resistance Functional 10 to 55Hz at double amplitude of 1.5mm (Detection time: 10µs)
(Only the N.C. side of 1 Form C is 0.8mm)
Destructive 10 to 55Hz at double amplitude of 1.5mm
Expected life Mechanical (at 180 times/min.) Min. 107
Electrical (at 20 times/min.) N.O.: Min. 105, N.C.: Min. 5 × 104
Conditions Conditions for operation, transport and storage*3, *4Ambient temperature: –40°C to +85°C –40°F to +185°F (Class B),
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Max. operating speed 20 times/min. (at nominal switching capacity)
Unit weight Approx. 12 g .42 oz
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
LZ (ALZ)
REFERENCE DATA
DIMENSIONS (mm inch)
1. Max. switching power (AC resistive load) 2. Max. switching power (DC resistive load) 3. Coil temperature rise
Sample: ALZ11F12, 5pcs.
Measured portion: coil inside
Contact current: 0 A, 16 A
101301000
1
10
16
100
100 440
Contact voltage, V
Contact current, A
100
1
10
100
100
Contact current, A
Contact voltage, V
1000 120 125110 115105 130 135
30
25
35
40
50
45
55
20
Normal
temperature
Normal
temperature
16A
0A
85°C
105°C
85°C
105°C
Temperature rise, °C
Coil applied voltage, %V
The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac
1. 1 Form A type (New PC board terminal)
External dimensions
28.8
5
0.50.5
202.5
15.7
3.5
0.5
12.5
7.5
0.8
1.134
.197
.020.020
.787.098
.618
.138
.020
.492
.295
.031
PC board pattern
Tolerance: ±0.1 ±.004
Schematic (Bottom view)
20
7.5
5
6-1.3 dia.
.787
.295
.197
6-.051 dia.
Coil
CAD Data
Dimension:
Less than 1mm .039inch:
Min. 1mm .039inch less than 3mm .118 inch:
Min. 3mm .118 inch:
Tolerance
±0.1 ±.004
±0.2 ±.008
±0.3 ±.012
2. 1 Form C type
External dimensions
28.8
5 5
12.5
7.5
15.7
3.5
0.5 0.8
0.5
0.5
202.5
1.134
.197 .197
.492
.295
.618
.138
.020 .031
.020
.020
.787.098
PC board pattern
Tolerance: ±0.1 ±.004
Schematic (Bottom view)
20
7.5
55
8-1.3 dia.
.787
.295
.197 .197
8-.051 dia.
Coil
CAD Data
Dimension:
Less than 1mm .039inch:
Min. 1mm .039inch less than 3mm .118 inch:
Min. 3mm .118 inch:
Tolerance
±0.1 ±.004
±0.2 ±.008
±0.3 ±.012
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
LZ (ALZ)
SAFETY STANDARDS
* CSA standard: Certified by C-UL
NOTES
For Cautions for Use.
UL/C-UL (Recognized) VDE (Certified) TV rating (UL/CSA)
File No. Contact rating File No. Contact rating File No. Rating
E43149 16A 277V AC, 34.8LRA/7.2FLA/120V AC, 15LRA/3FLA/120V AC
10LRA/3FLA 240V AC, 20A 240V AC (N.O. only)
16A 30V DC, 25A 240V AC, 15A 240V AC Resistive load 105°C (N.O. only)
40000380 16A 250V AC (cos
φ
=1.0) C-UL
E43149
TV-5
1. Electrical life (Sealed type)
In order to obtain the full rated life cycles,
the relay should be properly vented by
removing the vent nib after the soldering/
washing process.
Vent nib
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
