DimensionInchesMillimeters
A3.54 90.0
B 3.07 78.0
C2.91 74.0
D2.60 66.0
E 1.97 50.0
F1.26 32.0
G1.22 31.0
H1.18 30.0
J0.90 23.0
K0.79 20.0
L0.63 16.0
M 0.55 14.0
N .26 6.5
P 0.177±0.004 Dia. Dia. 4.50±0.1
Description:
Pow ere x Three-Phase Diode
Bridge Modules are designed for
use in three-phase bridge applica-
tions.The modules are isolated
consisting of six rectifier diodes.
Features:
MIsolated Mounting
MPlanar Chips
Applications:
MInverters
MDC Power Supplies
MAC Motor Control Front End
Ordering Information:
Select the complete eight digit
module par t number you desire
from the table below.
Example: ME601215 is a
1200 Volt, 150 Ampere Three-
Phase Diode Bridge Module.
Voltage Current Rating
Type Volts (x100) Amperes (x10)
ME60 12 15
16
D-91
Powerex, Inc., 200 Hillis Street,Youngwood, Pennsylvania 15697-1800 (724) 925-7272
Three-Phase
Diode Bridge Modules
150 Amperes/1200-1600 Volts
ME601215
ME601615
Outline Drawing
ME601215, ME601615
Three-Phase Diode Bridge Modules
150 Amperes/1200-1600 Volts
JJ M
F
LH
E
C
B DA
K (TYP.)
N
G
P - DIA. (4 TYP.)
5 - M6PN
http://store.iiic.cc/
D-92
Powerex, Inc., 200 Hillis Street,Youngwood, Pennsylvania 15697-1800 (724) 925-7272
ME601215, ME601615
Three-Phase Diode Bridge Modules
150 Amperes/1200-1600 Volts
Absolute Maximum Ratings
Characteristics Symbol ME601215 ME601615 Units
Peak Reverse Blocking Voltage VRRM 1200 1600 Volts
Transient Peak Reverse Blocking Voltage (Non-Repetitive), t < 5ms VRSM 1350 1700 Volts
DC Reverse Blocking Voltage VR(DC) 960 1280 Volts
DC Output Current, TC= 97°C IO150 150 Amperes
Peak One-Cycle Surge (Non-Repetitive) On-State Current (60Hz) IFSM 1500 1500 Amperes
Peak One-Cycle Surge (Non-Repetitive) On-State Current (50Hz) IFSM 1365 1365 Amperes
I2t (for Fusing), 8.3 milliseconds I2t 9400 9400 A2sec
Storage Temper ature TSTG -40 to 125 -40 to 125 °C
Operating Temper ature Tj-40 to 150 -40 to 150 °C
Maximum Mounting Torque M4 Mounting Screw — 12 12 in.-lb.
Maximum Mounting Torque M4 Terminal Screw — 12 12 in.-lb.
Module Weight (Typical) — 405 405 Grams
V Isolation VRMS 2500 2500 Volts
http://store.iiic.cc/
D-93
Powerex, Inc., 200 Hillis Street,Youngwood, Pennsylvania 15697-1800 (724) 925-7272
ME601215, ME601615
Three-Phase Diode Bridge Modules
150 Amperes/1200-1600 Volts
Electrical and Thermal Characteristics, Tj= 25°C unless otherwise specified
Characteristics Symbol Test Conditions ME601215/ME601615 Units
Blocking State Maximums
Reverse Leakage Current, Peak IRRM Tj= 150°C, VRRM = Rated 15 mA
Conducting State Maximums
Peak On-State Voltage VFM IFM = 150A 1.35 Volts
Thermal Maximums
Thermal Resistance, Junction-to-Case Ru(J-C) Per Module 0.15 °C/Watt
Thermal Resistance, Case-to-Sink (Lubricated) Ru(C-S) Per Module 0.04 °C/Watt
http://store.iiic.cc/
D-94
Powerex, Inc., 200 Hillis Street,Youngwood, Pennsylvania 15697-1800 (724) 925-7272
ME601215, ME601615
Three-Phase Diode Bridge Modules
150 Amperes/1200-1600 Volts
INSTANTANEOUS ON-STATE CURRENT, IFM,
(AMPERES)
MAXIMUM
ON-STATE CHARACTERISTICS
101102103104
INSTANTANEOUS ON-STATE VOLTAGE, VFM, (VOLTS)
Tj = 25oC
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
CYCLES AT 60 HZ
MAXIMUM PEAK SURGE (NON-REPETITIVE)
CURRENT, IFSM, (AMPERES)
MAXIMUM ALLOWABLE PEAK SURGE
(NON-REPETITIVE) CURRENT
0
250
500
750
1000
1250
1500
101102
100
MAXIMUM
ALLOWABLE CASE TEMPERATURE
DC OUTPUT CURRENT, IO, (AMPERES)
MAXIMUM ALLOWABLE CASE TEMPERATURE, TC, (oC)
0 25 10050 75 125 150
0
80
90
100
110
120
130
140
150
160
MAXIMUM
ON-STATE POWER DISSIPATION
DC OUTPUT CURRENT, IO, (AMPERES)
MAXIMUM POWER DISSIPATION, PAV(MAX), (WATTS)
025
0
50
100
150
200
250
300
350
400
50 75 100 125 150
TIME, t, (SECONDS)
TRANSIENT THERMAL IMPEDANCE
CHARACTERISTICS (JUNCTION-TO-CASE)
10-3 10-2 10-1 101
TRANSIENT THERMAL IMPEDANCE, Zu(J-C)(t), (oC/WATT)
0100
0.02
0.04
0.06
0.08
0.10
0.12
0.14
0.16
http://store.iiic.cc/
