T-1 3/4 (5mm) BI-COLOR RIGHT ANGLE LED INDICATOR Part Number: WP59CB/EYW High Efficiency Red Yellow Features Descriptions z Pre-trimmed leads for pc board mounting. z The High Efficiency Red source color devices are made z 3 leads with one common lead. z Black case enhances contrast ratio. with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. z The Yellow source color devices are made with Gallium z Wide viewing angle. z High reliability - life measured in years. Arsenide Phosphide on Gallium Phosphide Yellow Light z Housing UL rating: 94V-0. Emitting Diode. z Housing material: type 66 nylon. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF2079 REV NO: V.5A DATE: MAR/19/2015 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1102001744 Selection Guide Part No. Dice Min. Typ. 30 60 *20 *40 20 40 *20 *40 High Efficiency Red (GaAsP/GaP) WP59CB/EYW Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type White Diffused Yellow (GaAsP/GaP) 21/2 60 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength High Efficiency Red Yellow D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 627 590 nm IF=20mA High Efficiency Red Yellow 617 588 nm IF=20mA Spectral Line Half-width High Efficiency Red Yellow 45 35 nm IF=20mA C Capacitance High Efficiency Red Yellow 15 20 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Yellow 2 2.1 2.5 2.5 V IF=20mA IR Reverse Current High Efficiency Red Yellow 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. 4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Yellow Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating / Storage Temperature V -40C To +85C Lead Solder Temperature [2] 260C For 3 Seconds Lead Solder Temperature [3] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2079 REV NO: V.5A DATE: MAR/19/2015 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1102001744 WP59CB/EYW High Efficiency Red SPEC NO: DSAF2079 REV NO: V.5A DATE: MAR/19/2015 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1102001744 Yellow SPEC NO: DSAF2079 REV NO: V.5A DATE: MAR/19/2015 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1102001744 PACKING & LABEL SPECIFICATIONS WP59CB/EYW Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAF2079 REV NO: V.5A DATE: MAR/19/2015 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1102001744 SPEC NO: DSAF2079 REV NO: V.5A DATE: MAR/19/2015 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1102001744 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kingbright: WP59CB/EYW