APT06DC60HJ ISOTOP(R) SiC Diode Full Bridge Power Module VRRM = 600V IC = 6A @ Tc = 100C Application * * * * Switch mode power supplies rectifier Induction heating Welding equipment High speed rectifiers Features * SiC Schottky Diode - Zero reverse recovery - Zero forward recovery - Temperature Independent switching behavior - Positive temperature coefficient on VF ISOTOP(R) Package (SOT-227) Very low stray inductance High level of integration * * * + ~ ~ Benefits * * * * * * - Outstanding performance at high frequency operation Low losses Low noise switching Direct mounting to heatsink (isolated package) Low junction to case thermal resistance RoHS Compliant ISOTOP(R) Symbol VR VRRM IF(AV) IFSM Parameter Maximum DC reverse Voltage Maximum Peak Repetitive Reverse Voltage Maximum Average Forward Current Duty cycle = 50% Non-Repetitive Forward Surge Current 10 s TC = 100C TC = 25C Max ratings Unit 600 V 6 210 A These Devices are sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. See application note APT0502 on www.microsemi.com www.microsemi.com 1-3 APT06DC60HJ - Rev 1 November, 2009 Absolute maximum ratings APT06DC60HJ All ratings @ Tj = 25C unless otherwise specified Electrical Characteristics Symbol Characteristic Test Conditions VF Diode Forward Voltage IRM Maximum Reverse Leakage Current QC Total Capacitive Charge C Total Capacitance Min Tj = 25C Tj = 175C Tj = 25C VR = 600V Tj = 175C IF = 6A, VR = 600V di/dt =500A/s f = 1MHz, VR = 200V f = 1MHz, VR = 400V IF = 6A Typ 1.6 2.0 50 100 Max 1.8 2.4 200 1000 Unit V A 17 nC 40 30 pF Thermal and package characteristics Symbol RthJC RthJA VISOL TJ,TSTG TL Torque Wt Characteristic Junction to Case Thermal resistance Junction to Ambient Min RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz 2500 -55 Storage Temperature Range Max Lead Temp for Soldering:0.063" from case for 10 sec Mounting torque (Mounting = 8-32 or 4mm Machine and terminals = 4mm Machine) Package Weight Typ Max 3.5 20 Unit C/W V 175 300 1.5 29.2 C N.m g SOT-227 (ISOTOP(R)) Package Outline 11.8 (.463) 12.2 (.480) 7.8 (.307) 8.2 (.322) r = 4.0 (.157) (2 places) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 4.0 (.157) 4.2 (.165) (2 places) 3.3 (.129) 3.6 (.143) 8.9 (.350) 9.6 (.378) Hex Nut M4 (4 places) 0.75 (.030) 0.85 (.033) 25.2 (0.992) 25.4 (1.000) 3.30 (.130) 12.6 (.496) 4.57 (.180) 12.8 (.504) 1.95 (.077) 2.14 (.084) 14.9 (.587) 15.1 (.594) 30.1 (1.185) 30.3 (1.193) Dimensions in Millimeters and (Inches) 38.0 (1.496) 38.2 (1.504) www.microsemi.com 2-3 APT06DC60HJ - Rev 1 November, 2009 31.5 (1.240) 31.7 (1.248) APT06DC60HJ Typical Performance Curve Maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration Thermal Impedance (C/W) 4 3.5 0.9 3 0.7 2.5 0.5 2 1.5 0.3 1 0.1 0.5 Single Pulse 0.05 0 0.00001 0.0001 0.001 0.01 0.1 1 10 Rectangular Pulse Duration (Seconds) Reverse Characteristics Forward Characteristics 200 TJ=25C 10 IR Reverse Current (A) IF Forward Current (A) 12 TJ=75C 8 TJ=175C 6 4 TJ=125C 2 TJ=175C 160 120 80 0.5 1 1.5 2 2.5 TJ=75C 40 0 0 TJ=125C 3 0 200 TJ=25C 300 400 500 600 700 VR Reverse Voltage (V) VF Forward Voltage (V) Capacitance vs.Reverse Voltage C, Capacitance (pF) 250 200 150 100 50 0 10 100 VR Reverse Voltage 1000 ISOTOP(R) is a registered trademark of ST Microelectronics NV Microsemi reserves the right to change, without notice, the specifications and information contained herein Microsemi's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 6,939,743 7,352,045 5,283,201 5,801,417 5,648,283 7,196,634 6,664,594 7,157,886 6,939,743 7,342,262 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. www.microsemi.com 3-3 APT06DC60HJ - Rev 1 November, 2009 1