A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet - HI Reed Relays HI Series Reed Relays Features: High Insulation Relay Coil/Contact 100 TOhm, High Leakage Distance Applications: Test Systems, Control Systems, Medical Equipment, Measurement Equipment & Others Markets: Medical, Test and Measurement & Others HI 00-1A00 Part-Description: Nominal Voltage Contact QTY Contact Form Switch Model 05, 12 1 A 66, 75, 85 Customer Options Contact Data 66 75 85 Rated Power (max.) 10 10 100 W 200 500 1,000 V 0.5 0.5 1.0 A 1 1 2.5 A 150 200 150 mOhm 0.25 1.0 3.0 kVDC 0.7 0.5 1.1 ms 0.05 0.1 0.1 ms 1012 1012 1013 Ohm 0.2 0.2 0.2 pF Switch Model Any DC combination of V&A not to exceed their individual max.'s Switching Voltage (max.) DC or peak AC Switching Current (max.) DC or peak AC Carry Current (max.) DC or peak AC Contact Resistance (max.) @ 0.5V & 50mA Breakdown Voltage (min.) According to EN60255-5 Operating Time (max.) Incl. Bounce; Measured with w/ Nominal Voltage Release Time (max.) Measured with no Coil Excitation Insulation Resistance (typ.) Rh<45%, 100V Test Voltage Capacitance (typ.) @ 10kHz across open Switch USA: Europe: Asia: +1.866.782.6339 +49.7731.8399.0 +86.21.37820625 salesusa@standexmeder.com info@standexmeder.com salesasia@standexmeder.com Modifications in the sense of technical progress are reserved. Unit Version 01 27.01.2015 A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet - HI Reed Relays Coil Data Contact Switch Form Model Unit 1A 66, 75* 1A 85 Coil Voltage (nom.) Coil Resistance (typ.) Pull-In Voltage (max.) Drop-Out Voltage (min.) Nominal Coil Power (typ.) VDC Ohm VDC VDC mW 05 600 3.5 0.75 42 12 3,000 8.4 1.8 48 05 140 3.5 0.75 179 12 900 8.4 1.8 160 The Pull-In / Drop-Out Voltage and Coil Resistance will change at rate of 0.4% per C. * 1A75 only available with Coil Voltage 05 Environmental Data HI Reed Relay Unit Shock Resistance (max.) 50 g 20 g Operating Temperature -20 to 70 C Storage Temperature Soldering Temperature (max.) -25 to 85 C 260 C 1/2 sine wave duration 11ms Vibration Resistance (max.) 5 sec. max. Handling & Assembly Instructions Switching inductive and/or capacitive loads create voltage and/or current peaks, which may damage the relay. Protective circuits need to be used. External magnetic fields needs to be taken into consideration, including a too high packing density. This may influence the relays' electrical characteristics. Life Test Data Mechanical shock impacts e.g. dropping the relays may cause immediate or post-installation failure. Wave soldering: maximum 260/5 seconds. Reflow soldering: Recommendations given by the soldering paste manufacturer need to be considered as well as the temperature limits of other components/processes. *Load increase reduces life expectancy of Reed Switches Glossary Contact Form Form A NO = Normally Open Contacts SPST = Single Pole Single Throw Form B NC = Normally Closed Contacts SPST = Single Pole Single Throw Form C Changeover SPDT = Single Pole Double Throw USA: Europe: Asia: +1.866.782.6339 +49.7731.8399.0 +86.21.37820625 salesusa@standexmeder.com info@standexmeder.com salesasia@standexmeder.com Modifications in the sense of technical progress are reserved. Version 01 27.01.2015 A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet - HI Reed Relays Pin Out Top View 2.54mm [0.10"] pitch grid USA: Europe: Asia: +1.866.782.6339 +49.7731.8399.0 +86.21.37820625 salesusa@standexmeder.com info@standexmeder.com salesasia@standexmeder.com Modifications in the sense of technical progress are reserved. Version 01 27.01.2015