CD4001BC,CD4001BM,CD4011BC,CD4011BM CD4001BM/CD4001BC Quad 2-Input NOR Buffered B Series Gate CD4011BM/CD4011BC Quad 2-Input NAND Buffered B Series Gate Literature Number: SNOS352A CD4001BM/CD4001BC Quad 2-Input NOR Buffered B Series Gate CD4011BM/CD4011BC Quad 2-Input NAND Buffered B Series Gate General Description Features These quad gates are monolithic complementary MOS (CMOS) integrated circuits constructed with N- and P-channel enhancement mode transistors. They have equal source and sink current capabilities and conform to standard B series output drive. The devices also have buffered outputs which improve transfer characteristics by providing very high gain. All inputs are protected against static discharge with diodes to VDD and VSS. Y Y Y et e Y Low power TTL Fan out of 2 driving 74L compatibility or 1 driving 74LS 5V - 10V - 15V parametric ratings Symmetrical output characteristics Maximum input leakage 1 mA at 15V over full temperature range Schematic Diagrams CD4001BC/BM (/4 of device shown ol JeAaB Logical ``1'' e High Logical ``0'' e Low bs TL/F/5939 - 2 *All inputs protected by standard CMOS protection circuit. TL/F/5939 - 1 O CD4011BC/BM (/4 of device shown JeA#B Logical ``1'' e High Logical ``0'' e Low TL/F/5939 - 6 *All inputs protected by standard CMOS protection circuit. TL/F/5939 - 5 C1995 National Semiconductor Corporation TL/F/5939 RRD-B30M105/Printed in U. S. A. CD4001BM/CD4001BC Quad 2-Input NOR Buffered B Series Gate CD4011BM/CD4011BC Quad 2-Input NAND Buffered B Series Gate March 1988 Absolute Maximum Ratings (Notes 1 and 2) Operating Conditions If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Operating Range (VDD) Voltage at any Pin b 0.5V to VDD a 0.5V Power Dissipation (PD) Dual-In-Line Small Outline VDD Range 3 VDC to 15 VDC Operating Temperature Range CD4001BM, CD4011BM CD4001BC, CD4011BC b 55 C to a 125 C b 40 C to a 85 C 700 mW 500 mW b 0.5 VDC to a 18 VDC b 65 C to a 150 C Storage Temperature (TS) Lead Temperature (TL) (Soldering, 10 seconds) 260 C DC Electrical Characteristics CD4001BM, CD4011BM (Note 2) Symbol Parameter b 55 C Conditions Min a 25 C Max Min a 125 C Typ Max Min Units Max IDD Quiescent Device Current VDD e 5V, VIN e VDD or VSS VDD e 10V, VIN e VDD or VSS VDD e 15V, VIN e VDD or VSS 0.25 0.50 1.0 0.004 0.005 0.006 0.25 0.50 1.0 7.5 15 30 mA mA mA VOL Low Level Output Voltage VDD e 5V VDD e 10V VDD e 15V 0.05 0.05 0.05 0 0 0 0.05 0.05 0.05 0.05 0.05 0.05 V V V VOH High Level Output Voltage VDD e 5V VDD e 10V VDD e 15V VIL Low Level Input Voltage VDD e 5V, VO e 4.5V VDD e 10V, VO e 9.0V VDD e 15V, VO e 13.5V VIH High Level Input Voltage VDD e 5V, VO e 0.5V VDD e 10V, VO e 1.0V VDD e 15V, VO e 1.5V 3.5 7.0 11.0 3.5 7.0 11.0 3 6 9 3.5 7.0 11.0 V V V IOL Low Level Output Current (Note 3) VDD e 5V, VO e 0.4V VDD e 10V, VO e 0.5V VDD e 15V, VO e 1.5V 0.64 1.6 4.2 0.51 1.3 3.4 0.88 2.25 8.8 0.36 0.9 2.4 mA mA mA IOH High Level Output Current (Note 3) VDD e 5V, VO e 4.6V VDD e 10V, VO e 9.5V VDD e 15V, VO e 13.5V b 0.64 b 1.6 b 4.2 b 0.51 b 1.3 b 3.4 b 0.88 b 2.25 b 8.8 b 0.36 b 0.9 b 2.4 mA mA mA IIN Input Current VDD e 15V, VIN e 0V VDD e 15V, VIN e 15V et e lIOl k 1 mA 4.95 9.95 14.95 4.95 9.95 14.95 1.5 3.0 4.0 5 10 15 2 4 6 4.95 9.95 14.95 bs V V V 1.5 3.0 4.0 ol ( ( lIOl k 1 mA 1.5 3.0 4.0 b 0.10 b 10 b 5 b 0.10 b 1.0 0.10 10b5 0.10 1.0 V V V mA mA Connection Diagrams CD4011BC/CD4011BM Dual-In-Line Package O CD4001BC/CD4001BM Dual-In-Line Package TL/F/5939 - 4 Top View Order Number CD4001B or CD4011B TL/F/5939-3 Top View 2 DC Electrical Characteristics CD4001BC, CD4011BC (Note 2) Symbol Parameter b 40 C Conditions Min IDD Quiescent Device Current VDD e 5V, VIN e VDD or VSS VDD e 10V, VIN e VDD or VSS VDD e 15V, VIN e VDD or VSS VOL Low Level Output Voltage VDD e 5V VDD e 10V VDD e 15V High Level Output Voltage VDD e 5V VDD e 10V VDD e 15V VIL Low Level Input Voltage VDD e 5V, VO e 4.5V VDD e 10V, VO e 9.0V VDD e 15V, VO e 13.5V VIH High Level Input Voltage VDD e 5V, VO e 0.5V VDD e 10V, VO e 1.0V VDD e 15V, VO e 1.5V IOL Low Level Output Current (Note 3) VDD e 5V, VO e 0.4V VDD e 10V, VO e 0.5V VDD e 15V, VO e 1.5V IOH High Level Output Current (Note 3) VDD e 5V, VO e 4.6V VDD e 10V, VO e 9.5V VDD e 15V, VO e 13.5V IIN Input Current VDD e 15V, VIN e 0V VDD e 15V, VIN e 15V ( (ll Max a 85 C Max 1 2 4 0.004 0.005 0.006 1 2 4 7.5 15 30 mA mA mA 0.05 0.05 0.05 0 0 0 0.05 0.05 0.05 0.05 0.05 0.05 V V V 4.95 9.95 14.95 5 10 15 1.5 3.0 4.0 3.5 7.0 11.0 Max 4.95 9.95 14.95 1.5 3.0 4.0 V V V 1.5 3.0 4.0 3 6 9 V V V 3.5 7.0 11.0 V V V et e 3.5 7.0 11.0 2 4 6 Min Units Typ 4.95 9.95 14.95 IO k 1 mA Min 0.52 1.3 3.6 0.44 1.1 3.0 0.88 2.25 8.8 0.36 0.9 2.4 mA mA mA b 0.52 b 1.3 b 3.6 b 0.44 b 1.1 b 3.0 b 0.88 b 2.25 b 8.8 b 0.36 b 0.9 b 2.4 mA mA mA b 0.30 b 10 b 5 b 0.30 b 1.0 0.30 10b5 0.30 1.0 ol VOH lIOl k 1 mA a 25 C mA mA AC Electrical Characteristics* CD4001BC, CD4001BM TA e 25 C, Input tr; tf e 20 ns. CL e 50 pF, RL e 200k. Typical temperature coefficient is 0.3%/ C. tPLH Parameter Typ Max Units VDD e 5V VDD e 10V VDD e 15V 120 50 35 250 100 70 ns ns ns Propagation Delay Time, Low-to-High Level VDD e 5V VDD e 10V VDD e 15V 110 50 35 250 100 70 ns ns ns Transition Time VDD e 5V VDD e 10V VDD e 15V 90 50 40 200 100 80 ns ns ns 7.5 pF O tTHL, tTLH Conditions Propagation Delay Time, High-to-Low Level bs Symbol tPHL CIN Average Input Capacitance Any Input 5 CPD Power Dissipation Capacity Any Gate 14 pF *AC Parameters are guaranteed by DC correlated testing. Note 1: ``Absolute Maximum Ratings'' are those values beyond which the safety of the device cannot be guaranteed. Except for ``Operating Temperature Range'' they are not meant to imply that the devices should be operated at these limits. The table of ``Electrical Characteristics'' provides conditions for actual device operation. Note 2: All voltages measured with respect to VSS unless otherwise specified. Note 3: IOL and IOH are tested one output at a time. 3 AC Electrical Characteristics* CD4011BC, CD4011BM TA e 25 C, Input tr; tf e 20 ns. CL e 50 pF, RL e 200k. Typical Temperature Coefficient is 0.3%/ C. Parameter Conditions Typ Max Units tPHL Symbol Propagation Delay, High-to-Low Level VDD e 5V VDD e 10V VDD e 15V 120 50 35 250 100 70 ns ns ns tPLH Propagation Delay, Low-to-High Level VDD e 5V VDD e 10V VDD e 15V 85 40 30 250 100 70 ns ns ns tTHL, tTLH Transition Time VDD e 5V VDD e 10V VDD e 15V 90 50 40 200 100 80 ns ns ns CIN Average Input Capacitance Any Input 5 7.5 CPD Power Dissipation Capacity Any Gate 14 pF pF *AC Parameters are guaranteed by DC correlated testing. et e Typical Performance Characteristics Typical Transfer Characteristics TL/F/5939 - 8 TL/F/5939 - 9 bs TL/F/5939-7 Typical Transfer Characteristics ol Typical Transfer Characteristics O Typical Transfer Characteristics TL/F/5939 - 11 TL/F/5939-10 FIGURE 5 4 TL/F/5939 - 12 FIGURE 6 Typical Performance Characteristics (Continued) TL/F/5939-13 TL/F/5939 - 14 TL/F/5939 - 15 FIGURE 8 FIGURE 9 et e FIGURE 7 TL/F/5939-16 TL/F/5939 - 18 TL/F/5939 - 17 ol FIGURE 10 FIGURE 12 O bs FIGURE 11 TL/F/5939 - 19 TL/F/5939 - 20 FIGURE 13 FIGURE 14 5 bs ol et e Ceramic Dual-In-Line Package (J) Order Number CD4001BMJ, CD4001BCJ, CD40011BMJ or CD4011BCJ NS Package Number J14A Molded Dual-In-Line Package (N) Order Number CD4001BMN, CD4001BCN, CD4011BMN or CD4011BCN NS Package Number N14A LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: O CD4001BM/CD4001BC Quad 2-Input NOR Buffered B Series Gate CD4011BM/CD4011BC Quad 2-Input NAND Buffered B Series Gate Physical Dimensions inches (millimeters) 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: (a49) 0-180-530 85 86 Email: cnjwge @ tevm2.nsc.com Deutsch Tel: (a49) 0-180-530 85 85 English Tel: (a49) 0-180-532 78 32 Fran3ais Tel: (a49) 0-180-532 93 58 Italiano Tel: (a49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page www.ti.com/video e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated