Technical Data Sheet Photolink - Fiber Optic Receiver PLR135/T Features 1. High PD sensitivity optimized for red light 2. Data : NRZ signal 3. Low power consumption for extended battery life 4. Built-in threshold control for improved noise Margin 5. Good ESD protection: up to 8KV 6. Pb Free 7. Receiver sensitivity: up to -27dBm (Min. for 16Mbps) up to -21dBm (Min. for 25Mbps) 8. The product itself will remain within RoHS compliant version. Descriptions The optical receiver is packaged with custom optic data link interface, integrated on a proprietary CMOS PDIC process. The unit functions by converting optical signals into electric ones. The unit is operated at 2.4 ~ 5.5 V and the signal output interface is TTL compatible with high performance at low power consumption. Applications 1. Digital Optical Data-Link 2. Dolby AC-3 Digital Audio Interface Everlight Electronics Co., Ltd. Device NO.: DPL-135-004 http://www.everlight.com Prepared date: 07-25-2005 Rev 2 Page: 1 of 8 Prepared By: Chin-Chia Hsu PLR135/T Package Dimensions PCB Layout for Electrical Circuit Notice: 1. Unit:mm 2. PCB tolerance:1.6mm Everlight Electronics Co., Ltd. Device NO.: DPL-135-004 http://www.everlight.com Prepared date: 07-25-2005 Rev 2 Page: 2 of 8 Prepared By: Chin-Chia Hsu PLR135/T Absolute Maximum Ratings( Ta = 25 C) Parameter Symbol Rating Unit Supply Voltage Output Voltage Vcc Vout -0.5 ~ +5.5 Vcc +0.3 V V Storage Temperature Operating Temperature Soldering Temperature Tstg Topr Tsol -40 to 85 -20 to 70 260* C C C * Soldering time 10 s. Electro-Optical Characteristics(Ta=-20~70,Vcc=3V) Parameter Symbol Conditions Vcc - 2.40 3.00 5.50 V Peak sensitivity wavelength Maximum receiver power p Pc,max - - 650 - Refer to Fig.1 - - -14 nm dBm Minimum receiver power Pc,min Refer to Fig.1 -27 - - dBm Icc Refer to Fig.2 - 4 12 mA VOH VOL Refer to Fig.3 Refer to Fig.3 2.1 2.5 - V - 0.2 0.4 V Rise time tr Refer to Fig.3 10 20 ns Fall time tf Refer to Fig.3 10 20 ns Propagation delay Low to High tPLH Refer to Fig.3 - - 120 ns Propagation delay High to Low tPHL Refer to Fig.3 - - 120 ns Pulse Width Distortion tw Refer to Fig.3 -25 - +25 ns Jitter tj Refer to Fig.3, Pc=-14dBm - 1 15 ns Refer to Fig.3, Pc=-27dBm - 5 20 Transfer rate T NRZ signal 0.1 - 16 ns Mb/s Power supply voltage Dissipation current High level output voltage Low level output voltage Everlight Electronics Co., Ltd. Device NO.: DPL-135-004 http://www.everlight.com Prepared date: 07-25-2005 MIN. TYP. MAX. Unit Rev 2 Page: 3 of 8 Prepared By: Chin-Chia Hsu PLR135/T Measuring Method *Fig.1 Measuring Method of Maximum and Minimum Input Power that Receiver Unit Need Control Circuit Standard plastic optic fiber cable Transmitter PLR135 Receiver Unit Optical Power Meter *Fig.2 Measuring Method of Dissipation Current Standard plastic optic fiber cable Standard Transmitter Unit Vin Vcc PLR135 Receiver Unit GND Vcc Vout 0.1uF 47uH Signal Input GND A 16 Mbps NRZ "0101" successive signal input Everlight Electronics Co., Ltd. Device NO.: DPL-135-004 http://www.everlight.com Prepared date: 07-25-2005 3V Rev 2 Page: 4 of 8 Prepared By: Chin-Chia Hsu PLR135/T *Fig.3 Measuring Method of Output Voltage, Pulse and Jitter Standard plastic optic fiber cable Standard Transmitter Unit Vin Vcc PLR135 Receiver Unit GND GND Vcc 0.1uF 47uH Signal Input Vout A 3V 16 Mbps NRZ "0101" successive signal input TPHL TPLH CH1 50% Input CH2 Output 50% tj1 tj2 tw = TPHL-TPLH Application Circuit (1) General application circuit for Vcc=3V (2) General application circuit for Vcc=5V Receiver Unit Receiver Unit C1 Vcc C1 GND L2 Vout Vcc C1:0.1uF 3V C2 Vout GND C1:0.1uF C2:30pF (Suggestion) L2:47uH L2 5V L2:47uH Note: For having good coupling, the C1,C2 capacitor must be placed within 7mm Everlight Electronics Co., Ltd. Device NO.: DPL-135-004 http://www.everlight.com Prepared date: 07-25-2005 Rev 2 Page: 5 of 8 Prepared By: Chin-Chia Hsu PLR135/T Typical Electro-Optical Characteristics Curves Power supply voltage vs. Minimum receiver power Optical Input Sensitivity (dBm) -30 *Fig.5 Operating Voltage Vcc=3.3V -28 -26 -24 -22 -20 2.0 Transfer rate vs. Minimum receiver power -32 Operating Transfer Rate 16Mbps 25Mbps Optical Input Sensitivity (dBm) *Fig.4 -30 -28 -26 -24 -22 -20 -18 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 0 5 10 15 20 25 Transfer Rate (Mbps) Operating Voltage (V) Note: Before using the PLR135 device, please confirm the minimum sensitivity at different operating voltage and transmission rate. Everlight Electronics Co., Ltd. Device NO.: DPL-135-004 http://www.everlight.com Prepared date: 07-25-2005 Rev 2 Page: 6 of 8 Prepared By: Chin-Chia Hsu PLR135/T RELIABILITY TEST ITEMS Test Sample Size Number (n) Hour/Cycle (Piece) Failure (c) 10 seconds 22 n=22, c=0 2 High Temp. Storage Ta=100C 1000hrs 22 n=22, c=0 Ta=-55C 1000hrs 22 n=22, c=0 Ta=85C, RH=85% 1000hrs 22 n=22, c=0 300cycle 22 n=22, c=0 300cycle 22 n=22, c=0 1000hrs 22 n=22, c=0 2 Page: 7 of 8 No. Item 1 Soldering Heat 3 Low Temp. Storage 4 High Temp. & Humid. Test Test Condition 260C5C -55C ~~~~ 85C 5 Temperature Cycle (30min) (5min) (30min) 6 Thermal Shock -10C ~~~~ 100C (5min) (10sec) (5min) 7 DC Operating Life Everlight Electronics Co., Ltd. Device NO.: DPL-135-004 Vcc=3V, Ta=25C http://www.everlight.com Prepared date: 07-25-2005 Rev Prepared By: Chin-Chia Hsu PLR135/T Application Notes: PLR135 Series PCB layout for motherboard integration To achieve better jitter and low input optical power performances, several PCB layout guidelines must be followed. These guidelines ensure the most reliable PLR135 POF performance for the motherboard integration. Failed to implement these PCB guidelines may affect the PLR135 jitter and low input power performances. 1. Careful decoupling of the power supplies is very important. Place a 0.1uf surface mount (size 805 or smaller) capacitor as close as (less than 2cm) to the POF Vdd and Gnd leads. The 0.1uf act as a low impedance path to ground for any stray high frequency transient noises. 2. To reduce the digital noises form the digital IC on the motherboard, the planar capacitance formed by an isolated Vcc and Gnd planes is critical. The POF device must be mounted directly on these two planes to reduce the lead parasitic inductance. 3. The isolated Vdd and Gnd planes must be connected to the main Vcc and Gnd (digital) planes at a single point using ferrite beads. The beads are used to block the high frequency noises from the digital planes while still allowing the DC connections between the planes EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device NO.: DPL-135-004 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com Prepared date: 07-25-2005 Rev 2 Page: 8 of 8 Prepared By: Chin-Chia Hsu