FEATURES
• Lead free, ROHS Compliant
• High Q
• High self-resonant frequency including
nonmagnetic models in microwave range
• Shielded series use ferrite filled encapsulation
to reduce external magnetic coupling
• Low DC resistance
• Carrier and reel packaging is standard
• Ten case sizes
SPECIFICATIONS
Electrical
• Inductance & Q, etc.: See tables
• Temperature range –20°C to +85°C,
except GLY, GLYC, GLZ, GLZB and GLZP
Models are –40°C to +85°C
- Change of L = ±10% max, except
GL X, GLY, G LY C, GLZ, GLZB and GLZP
Models are ± 5%
- Change of Q = ±20% max, except GLY, GLYC,
GLZ, GLZB and GLZP Models are ±25%
• Rated Current: See tables. Current
rating is deter mined by either or both
of the following conditions:
1. Self heating raises SURFCOIL
temperature 20°C
2. Inductance value reduced by
10% from saturation effect
Mechanical (Chip Inductors)
• Suitable for wave flow soldering, infrared,
and vapor phase reflow (typically over 90%
coverage)
• Withstands soldering temperatures
without damage
• Fully encapsulated and ther mally cycled
for stability and highest reliability
[View applies to molded bobbin wound types]
Encapsulation: Epoxy resin all series;
GLC, GLD and GLW have ferrite
filler for closed magnetic circuit.
Core: Ferrite (except high
frequency GLA and
GLU series, which
are nonmagnetic)
Coil: Polyurethane
enameled copper wire
Terminal: Phosphor-Bronze
tin plated
Sprague-Goodman
SURFCOIL®SMT INDUCTORS
ENGINEERING BULLETIN
SG-800H.1
Supercedes SG-800G
Sprague-Goodman Electronics, Inc.
1700 SHAMES DRIVE, WESTBURY, NY 11590
TEL: 516-334-8700 • FAX: 516-334-8771
E-MAIL: info@spraguegoodman.com
SURFCOIL®SMT INDUCTORS SG-800H
2
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WES TBU RY, NY 11590 • TEL: 516-334-8700 • FAX: 516 -334-8771 • E-MAIL: i nfo@sp raguegoodman.com
GLZ SERIES — LASER CUT 0402 SIZE
Induct- Standard SRF Q/L Test Rated DCR
ance Inductance Model (MHz) Q Freq. Current (Ω)
L (nH) Tolerance No. min min (MHz) (mA) max
1.0 ± 0.3 nH GLZ1N030 6000 8 100 400 0.05
1.2 ± 0.3 nH GLZ1N225 6000 8 100 400 0.06
1.5 ± 0.3 nH GLZ1N520 6000 8 100 400 0.07
1.8 ± 0.3 nH GLZ1N817 6000 8 100 400 0.08
2.2 ± 0.3 nH GLZ2N214 6000 8 100 400 0.09
2.7 ± 0.3 nH GLZ2N711 5500 8 100 400 0.10
3.3 ± 0.3 nH GLZ3N309 5500 8 100 400 0.12
3.9 ± 0.3 nH GLZ3N908 5200 8 100 360 0.15
4.7 ± 0.3 nH GLZ4N706 4800 8 100 360 0.17
5.6 ± 0.3 nH GLZ5N605 4600 8 100 340 0.19
6.8 ± 5% GLZ6N805 4000 8 100 320 0.30
8.2 ± 5% GLZ8N205 3500 8 100 320 0.35
10.0 ± 5% GLZ10N05 2800 8 100 320 0.41
12.0 ± 5% GLZ12N05 2800 8 100 320 0.45
15.0 ± 5% GLZ15N05 2500 8 100 240 0.60
18.0 ± 5% GLZ18N05 2200 8 100 240 0.70
22.0 ± 5% GLZ22N05 2000 8 100 200 0.80
27.0 ± 5% GLZ27N05 1800 8 100 200 1.20
33.0 ± 5% GLZ33N05 1800 8 100 170 1.40
39.0 ± 5% GLZ39N05 1800 8 100 150 1.70
47.0 ± 5% GLZ47N05 1800 8 100 140 2.10
56.0 ± 5% GLZ56N05 1500 8 100 130 2.50
68.0 ± 5% GLZ68N05 1500 8 100 120 4.00
82.0 ± 5% GLZ82N05 1400 8 100 110 4.50
100.0 ± 5% GLZR1005 1200 8 100 90 5.50
0.039 ± 0.006
1.0 ± 0.15
0.008
0.2
0.02 ± 0.006
0.5 ± 0.15
0.02 ± 0.006
0.5 ± 0.15
PAD LAYOUT
2
3
4
1
0.063 ± 0.004
1.6 ± 0.1
0.022 ± 0.002
0.55 ± 0.05
TYP
0.022 ± 0.002
0.55 ± 0.05
All dimensions are in/mm.
GLZ GLZB and GLZP Series Outline Drawing
ITEM
1)Encapsulant
2)Terminal
3)Coil
4)Core
MATERIAL
Epoxy Resin
Tin coat
over Ni plate
Copper
Alumina
GLZP SERIES — HIGH CURRENT LOW DCR LASER CUT 0402 SIZE
Inductance Standard SRF Q/L Test Rated DCR
L Inductance Model (GHz) Q Frequency Current (Ω)
(nH) Tolerance No. min min (MHz) (A) max
2.2 ± 0.3 nH GLZP2N214 5.3 7 100 1.9 0.04
2.7 ± 0.3 nH GLZP2N711 5.3 7 100 1.8 0.05
3.3 ± 0.3 nH GLZP3N309 5.0 7 100 1.5 0.07
3.9 ± 0.3 nH GLZP3N908 4.8 7 100 1.4 0.08
4.7 ± 0.3 nH GLZP4N706 4.6 7 100 1.3 0.10
5.6 ± 0.3 nH GLZP5N605 4.2 7 100 1.2 0.12
6.8 ± 5% GLZP6N805 4.0 7 100 1.1 0.16
8.2 ± 5% GLZP8N205 3.7 7 100 0.90 0.21
10.0 ± 5% GLZP10N05 3.2 7 100 0.75 0.26
Inductance Standard Inductance SRF Rated DCR
L Inductance Test Freq. Model (MHz) Q Typ Q min Current (Ω)
(nH) Tolerance (MHz) No. min (800 MHz) (100 MHz) (mA) max
1.0 ± 0.2 nH 100 GLZB1N020 6000 41 10 400 0.05
1.2 ± 0.2 nH 100 GLZB1N217 6000 41 10 400 0.06
1.5 ± 0.2 nH 100 GLZB1N513 6000 40 10 400 0.07
1.8 ± 0.2 nH 100 GLZB1N811 6000 40 10 400 0.08
2.2 ± 0.2 nH 100 GLZB2N209 6000 40 10 400 0.09
2.7 ± 0.2 nH 100 GLZB2N707 5500 40 10 400 0.10
3.3 ± 0.2 nH 100 GLZB3N306 5500 39 10 400 0.12
3.9 ± 0 . 2 n H 1 00 G LZ B3N905 5200 39 1 0 3 60 0.15
4.7 ± 0 . 2 n H 1 00 G LZ B4N704 4800 39 1 0 3 60 0.17
5.6 ± 0.2 nH 100 GLZB5N604 4600 39 10 340 0.19
6.8 ± 0.2 nH 100 GLZB6N803 4000 39 10 320 0.30
8.2 ± 0.2 nH 100 GLZB8N202 3500 39 10 320 0.35
10.0 ± 2% 100 GLZB10002 2800 39 10 320 0.41
12.0 ± 2% 100 GLZB12002 2800 38 10 320 0.45
15.0 ± 2% 100 GLZB15002 2500 36 10 240 0.60
18.0 ± 2% 100 GLZB18002 2200 36 10 240 0.70
22.0 ± 2% 100 GLZB22002 2200 36 10 200 0.80
27.0 ± 2% 100 GLZB27002 1800 36 10 200 1.20
33.0 ± 2% 100 GLZB33002 1800 35 10 170 1.40
39.0 ± 2% 100 GLZB39002 1800 35 10 170 1.70
GLZB SERIES — HIGH Q LASER CUT 0402 SIZE
Carrier and reel specifications on page 12.
SURFCOIL®SMT INDUCTORS SG-800H
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WES TBU RY, NY 11590 • TEL: 516-334-8700 • FAX: 516 -334-8771 • E-MAIL: i nfo@sp raguegoodman.com
3
GLY SERIES — LASER CUT 0603 SIZE
Inductance Standard SRF Rated DCR
L (nH) Inductance Model (GHz) Q Typ Q min Current (Ω)
(10 0 MHz) Tolerance* No. min (80 0 MHz) (10 0 MHz) (mA) max
1.0 ± 0.3 nH GLY1N030 6.0 47 7 500 0.05
1.2 ± 0.3 nH GLY1N225 6.0 47 7 500 0.06
1.5 ± 0.3 nH GLY1N520 6.0 47 8 500 0.07
1.8 ± 0.3 nH GLY1N817 6.0 45 8 500 0.08
2.2 ± 0.3 nH GLY2N214 6.0 35 8 500 0.09
2.7 ± 0.3 nH GLY2N711 6.0 35 8 500 0.10
3.3 ± 0.3 nH GLY3N309 5.5 35 9 500 0.12
3.9 ± 5% GLY3N905 5.5 36 9 450 0.15
4.7 ± 5% GLY4N705 4.8 36 9 450 0.17
5.6 ± 5% GLY5N605 4.6 36 9 430 0.18
6.8 ± 5% GLY6N805 3.5 36 9 430 0.20
8.2 ± 5% GLY8N205 3.5 36 9 400 0.28
10.0 ± 5% GLY10N05 2.8 37 10 400 0.32
12.0 ± 5% GLY12N05 2.8 37 10 400 0.35
15.0 ± 5% GLY15N05 2.5 38 10 350 0.41
18.0 ± 5% GLY18N05 2.3 39 10 350 0.45
22.0 ± 5% GLY22N05 2.0 40 10 300 0.50
27.0 ± 5% GLY27N05 2.0 41 10 300 0.55
33.0 ± 5% GLY33N05 1.8 40 10 300 0.60
39.0 ± 5% GLY39N05 1.8 39 11 300 0.80
47.0 ± 5% GLY47N05 1.8 38 11 250 0.95
56.0 ± 5% GLY56N05 1.8 35 12 250 1.2
68.0 ± 5% GLY68N05 1.5 35 12 250 1.3
82.0 ± 5% GLY82N05 1.5 33 12 250 1.5
100.0 ± 5% GLYR1005 1.3 30 12 200 1.8
120.0 ± 5% GLYR1205 1.2 25 5 130 3.0
150.0 ± 5% GLYR1505 1.1 22 5 100 4.5
180.0 ± 5% GLYR1805 1.0 20 4 80 6.5
220.0 ± 5% GLYR2205 0.9 17 4 70 7.5
40
20
0
10 100 1000
FREQUENCY (MHz)
TYPICAL Q VERSUS FREQUENCY—GLY AND GLYC Series
Q
47 nH GLY 4.7 nH GLY
60
80
10000
10 nH GLYC
* ± 0.2 nH inductance tolerance is available for inductance values from 1.0 to 8.2 nH. ± 2% inductance tolerance is
available for inductance values of 10.0 nH and up. Consult factory regarding these special units.
GLYC SERIES — HIGH CURRENT LOW DCR LASER CUT 0603 SIZE
Inductance Standard SRF Rated DCR
L (nH) Inductance Model (GHz) Q min Current (mΩ)
(10 0 MHz) Tolerance No. min (100 MHz) (A) max
2.2 ± 10% GLYC2N210 6.0 8 2.1 30
2.7 ± 10% GLYC2N710 5.0 8 2.1 30
3.3 ± 10% GLYC3N310 5.0 8 2.1 40
3.9 ± 10% GLYC3N910 5.2 9 2.1 40
4.7 ± 10% GLYC4N710 4.8 9 2.1 50
5.6 ± 10% GLYC5N610 4.6 9 2.1 55
6.8 ± 10% GLYC6N810 4.0 9 1.9 55
8.2 ± 10% GLYC8N210 3.5 9 1.7 60
10.0 ± 10% GLYC10N10 2.8 9 1.4 65
12.0 ± 10% GLYC12N10 2.5 9 1.3 80
15.0 ± 10% GLYC15N10 2.2 9 0.9 100
18.0 ± 10% GLYC18N10 2.0 9 0.8 120
22.0 ± 10% GLYC22N10 1.8 9 0.7 150
Carrier and reel specifications on page 12.
0.063 ± 0.006
1.6 ± 0.15
0.02 ± 0.008
0.4 ± 0.2
0.031 ± 0.006
0.8 ± 0.15
0.031 ± 0.006
0.8 ± 0.15
PAD LAYOUT
2
3
4
1
0.091 ± 0.01
2.3 ± 0.3
0.035 ± 0.004
0.9 ± 0.1
0.035 ± 0.004
0.9 ± 0.1
TYP
All dimensions are in/mm.
GLY and GLYC Series Outline Drawing
ITEM
1)Encapsulant
2)Terminal
3)Coil
4)Core
MATERIAL
Epoxy Resin
Tin coat
over Ni plate
Copper
Alumina
SURFCOIL®SMT INDUCTORS SG-800H
4
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WES TBU RY, NY 11590 • TEL: 516- 334-8700 • F AX: 516- 334-8771 • E-MAIL: info@spraguegoodman.com
*±5% Inductance tolerance is available for inductance values of 0.033 µH and up.
0.049 ± 0.01
1.25 ± 0.3 0.039 ± 0.004
1.0 ± 0.1
0.047 ± 0.008
1.2 ± 0.2
0.079
2.00
0.049 ± 0.008
1.25 ± 0.2
0.016 ± 0.008
0.40 ± 0.2
+ 0.01
_ 0.008
+ 0.3
_ 0.2
0.039 TO 0.047
1.0 TO 1.2
0.20 TO 0.15
3.0 TO 3.8
0.035 TO 0.051
0.9 TO 1.3
PAD LAYOUT
All dimensions are in/mm.
GLX Series Outline Drawing
0.047 ± 0.004
1.2 ± 0.1
0.079 ± 0.008
2.0 ± 0.2
0.098 ± 0.012
2.5 ± 0.3 0.055 ± 0.008
1.4 ± 0.2 0.055 ± 0.004
1.4 ± 0.1
0.055 ± 0.008
1.4 ± 0.2
PAD LAYOUT
MARKING
(inductance & tolerance)
0.063 ± 0.008
1.6 ± 0.2
0.016 ± 0.008
0.4 ± 0.2 TYP
TERMINALS APPROX. FLUSH
TO MOUNTING SURFACE
GLW SERIES — HIGH CURRENT MOLDED BOBBIN WOUND 1008 SIZE
Induct- Standard SRF Q/L Test Rated DCR
ance Inductance Model (MHz) Q Freq. Current (Ω)
L (µH) Tolerance No. min min (MHz) (mA) max
1.0 ± 20% GLW1R020 95 10 7.96 475 0.45
1.5 ± 20% GLW1R520 85 10 7.96 435 0.55
2.2 ± 20% GLW2R220 65 10 7.96 390 0.65
3.3 ± 20% GLW3R320 55 8 7.96 340 0.85
4.7 ± 20% GLW4R720 43 8 7.96 285 1.2
6.8 ± 10% GLW6R810 39 8 7.96 275 1.3
10.0 ± 10% GLW10010 32 20 2.52 210 2.2
12.0 ± 10% GLW12010 25 20 2.52 195 2.7
15.0 ± 10% GLW15010 21 20 2.52 175 3.2
22.0 ± 10% GLW22010 18 20 2.52 160 4.0
33.0 ± 10% GLW33010 16 20 2.52 120 6.5
GLU and GLW Series Outline Drawing
All dimensions are in/mm.
100
50
40
30
20
10 10 100 1000
FREQUENCY (MHz)
TYPICAL Q VERSUS FREQUENCY—Non Magnetic GLX Series
Q
0.1 µH
0.47 µH
0.22 µH
39 nH
15 nH
Q
GLX SERIES — HIGH FREQUENCY NONMAGNETIC WIREWOUND 0805 SIZE
Inductance Standard SRF Q/L Test Rated DCR
L Inductance Model (MHz) Q Frequency Current (Ω)
(µH) Tolerance* No. min min (MHz) (mA) max
0.010 ± 10% GLX10N10 2500 10 100 540 0.18
0.012 ± 10% GLX12N10 2500 10 100 535 0.23
0.015 ± 10% GLX15N10 2500 12 100 520 0.23
0.018 ± 10% GLX18N10 2000 12 100 480 0.29
0.022 ± 10% GLX22N10 2000 15 100 465 0.29
0.027 ± 10% GLX27N10 1800 15 100 455 0.34
0.033 ± 10% GLX33N10 1500 15 100 395 0.39
0.039 ± 10% GLX39N10 1500 15 100 390 0.40
0.047 ± 10% GLX47N10 1000 15 100 385 0.46
0.056 ± 10% GLX56N10 1000 15 100 360 0.51
0.068 ± 10% GLX68N10 800 15 100 340 0.57
0.082 ± 10% GLX82N10 800 15 100 330 0.62
0.10 ± 10% GLXR1010 800 8 25.2 285 0.86
0.12 ± 10% GLXR1210 600 8 25.2 275 0.99
0.15 ± 10% GLXR1510 600 10 25.2 230 1.47
0.18 ± 10% GLXR1810 600 10 25.2 195 1.61
0.22 ± 10% GLXR2210 500 10 25.2 170 1.83
0.27 ± 10% GLXR2710 300 10 25.2 165 1.95
0.33 ± 10% GLXR3310 200 10 25.2 160 2.16
0.39 ± 10% GLXR3910 150 10 25.2 150 2.37
0.47 ± 10% GLXR4710 150 10 25.2 145 2.56
0.56 ± 10% GLXR5610 100 10 25.2 140 2.69
0.68 ± 10% GLXR6810 100 10 25.2 130 3.02
0.82 ± 10% GLXR8210 80 10 25.2 125 3.38
1.00 ± 10% GLX1R010 80 8 7.96 120 3.87
Carrier and reel specifications on page 12.
SURFCOIL®SMT INDUCTORS SG-800H
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WES TBU RY, NY 11590 • TEL: 516- 334-8700 • F AX: 516- 334-8771 • E-MAIL: info@spraguegoodman.com
5
Inductance Standard Inductance Model SRF (MHz) Q Q/L Test Rated Current DCR (Ω)
L (µH) Tolerance* No. min min Freq. (MHz) (mA) max
0.22 ± 10% GLUR2210M 230 25 25.2 190 0.70
0.27 ± 10% GLUR2710M 210 25 25.2 180 0.75
0.33 ± 10% GLUR3310M 190 25 25.2 170 0.85
0.39 ± 10% GLUR3910M 175 25 25.2 160 0.95
0.47 ± 10% GLUR4710M 160 25 25.2 155 1.00
0.56 ± 10% GLUR5610M 150 25 25.2 150 1.10
0.68 ± 10% GLUR6810M 135 25 25.2 140 1.25
0.82 ± 10% GLUR8210M 125 25 25.2 130 1.40
1.00 ± 10% GLU1R010 115 25 7.96 195 0.65
1.20 ± 10% GLU1R210 100 25 7.96 180 0.75
1.50 ± 10% GLU1R510 90 25 7.96 170 0.85
1.80 ± 10% GLU1R810 85 25 7.96 160 0.95
2.20 ± 10% GLU2R210 80 25 7.96 155 1.05
2.70 ± 10% GLU2R710 75 25 7.96 145 1.20
3.30 ± 10% GLU3R310 65 25 7.96 135 1.30
3.90 ± 10% GLU3R910 60 25 7.96 130 1.40
4.70 ± 10% GLU4R710 55 25 7.96 125 1.55
5.60 ± 10% GLU5R610 50 25 7.96 120 1.75
6.80 ± 10% GLU6R810 45 25 7.96 115 1.95
8.20 ± 10% GLU8R210 40 25 7.96 105 2.20
10.0 ± 5% GLU10005 32 25 2.52 80 3.5
12.0 ± 5% GLU12005 30 25 2.52 75 3.8
15.0 ± 5% GLU15005 28 25 2.52 70 4.4
18.0 ± 5% GLU18005 25 25 2.52 65 5.0
22.0 ± 5% GLU22005 22 25 2.52 60 5.8
27.0 ± 5% GLU27005 21 20 2.52 115 6.3
33.0 ± 5% GLU33005 20 20 2.52 110 7.1
39.0 ± 5% GLU39005 18 20 2.52 90 9.5
47.0 ± 5% GLU47005 17 20 2.52 80 11.0
56.0 ± 5% GLU56005 16 20 2.52 75 12.1
68.0 ± 5% GLU68005 15 20 2.52 70 16.6
82.0 ± 5% GLU82005 13 20 2.52 65 19.0
100.0 ± 5% GLU10105 12 15 0.796 60 21.0
Inductance Standard Inductance Model SRF (MHz) Q Q/L Test Rated Current DCR (Ω)
L (µH) Tolerance* No. min min Freq. (MHz) (mA) max
0.010 ± 10% GLU10N10 2500 10 100 280 0.32
0.012 ± 10% GLU12N10 2200 10 100 270 0.34
0.015 ± 10% GLU15N10 1800 10 100 255 0.38
0.018 ± 10% GLU18N10 1550 10 100 250 0.40
0.022 ± 10% GLU22N10 1350 15 100 240 0.43
0.027 ± 10% GLU27N10 1150 15 100 230 0.47
0.033 ± 10% GLU33N10 1000 15 100 220 0.51
0.039 ± 10% GLU39N10 890 15 100 215 0.55
0.047 ± 10% GLU47N10 770 15 100. 205 0.59
0.056 ± 10% GLU56N10 670 15 100. 200 0.63
0.068 ± 10% GLU68N10 590 15 100. 190 0.68
0.082 ± 10% GLU82N10 520 15 100. 185 0.73
0.10 ± 10% GLUR1010 460 10 25.2 175 0.80
0.12 ± 10% GLUR1210 400 10 25.2 170 0.87
0.15 ± 10% GLUR1510 340 10 25.2 160 0.98
0.18 ± 10% GLUR1810 300 10 25.2 155 1.05
0.22 ± 10% GLUR2210 260 10 25.2 145 1.15
0.27 ± 10% GLUR2710 230 10 25.2 140 1.25
0.33 ± 10% GLUR3310 200 10 25.2 135 1.37
0.39 ± 10% GLUR3910 180 10 25.2 130 1.47
0.47 ± 10% GLUR4710 160 10 25.2 125 1.58
0.56 ± 10% GLUR5610 145 10 25.2 120 1.70
0.68 ± 10% GLUR6810 130 10 25.2 110 1.85
0.82 ± 10% GLUR8210 100 10 25.2 100 2.10
GLU SERIES — NONMAGNETIC HIGH FREQUENCY MOLDED BOBBIN WOUND 1008 SIZE
GLU SERIES — MOLDED BOBBIN WOUND 1008 SIZE
* ±5% Inductance tolerance is available for inductance values up to 8.2 µH. Carrier and reel specifications on page 12.
*±5% Inductance tolerance is available for inductance values of 0.033 µH and up. Carrier and reel specifications on page 12.
SURFCOIL®SMT INDUCTORS SG-800H
6
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WES TBU RY, NY 11590 • TEL: 516- 334-8700 • F AX: 516- 334-8771 • E-MAIL: info@spraguegoodman.com
GLA SERIES — MOLDED BOBBIN WOUND 1210 SIZE
Inductance Standard Inductance Model SRF (MHz) Q Q/L Test Rated Current DCR (Ω)
L (µH) Tolerance †No. min min Freq. (MHz) (mA) max
0.22 ± 10% GLAR2210M 230 25 25.2 360 0.29
0.27 ± 10% GLAR2710M 210 25 25.2 345 0.32
0.33 ± 10% GLAR3310M 190 25 25.2 330 0.35
0.39 ± 10% GLAR3910M 175 25 25.2 305 0.39
0.47 ± 10% GLAR4710M 160 25 25.2 290 0.44
0.56 ± 10% GLAR5610M 150 25 25.2 275 0.49
0.68 ± 10% GLAR6810M 135 25 25.2 260 0.55
0.82 ± 10% GLAR8210M 125 25 25.2 245 0.61
1.00 ± 10% GLA1R010 115 30 * 7.96 230 0.69
1.20 ± 10% GLA1R210 100 30 * 7.96 215 0.75
1.50 ± 10% GLA1R510 90 30 * 7.96 210 0.75
1.80 ± 10% GLA1R810 85 30 * 7.96 200 0.82
2.20 ± 10% GLA2R210 80 30 * 7.96 190 0.95
2.70 ± 10% GLA2R710 75 30 * 7.96 180 1.1
3.30 ± 10% GLA3R310 65 30* 7.96 180* 1.2 *
3.90 ± 10% GLA3R910 60 30* 7.96 175* 1.3 *
4.70 ± 10% GLA4R710 55 30 * 7.96 165 * 1.5
5.60 ± 10% GLA5R610 50 30* 7.96 160* 1.6 *
6.80 ± 10% GLA6R810 45 30* 7.96 150* 1.8 *
8.20 ± 10% GLA8R210 40 30* 7.96 140* 2.0 *
10.0 ± 10% GLA10010 36 30 2.52 140 * 2.1 *
12.0 ± 10% GLA12010 33 30 2.52 125 * 2.5 *
15.0 ± 10% GLA15010 30 30 2.52 120 * 2.8 *
18.0 ± 10% GLA18010 27 30 2.52 110 * 3.3 *
22.0 ± 10% GLA22010 25 30 2.52 105 * 3.7 *
27.0 ± 10% GLA27010 22 30 2.52 90 * 5.0 *
33.0 ± 10% GLA33010 20 30 2.52 85 * 5.6 **
39.0 ± 10% GLA39010 20 30 2.52 80 * 6.4 **
47.0 ± 10% GLA47010 15 30 2.52 75 7.0
56.0 ± 10% GLA56010 15 30 2.52 70 8.0
68.0 ± 10% GLA68010 15 30 2.52 65 9.0
82.0 ± 10% GLA82010 11 30 * 2.52 60 10.0
100.0 ± 10% GLA10110 10 20 * 0.796 60 10.0
120.0 ± 10% GLA12110 10 20 * 0.796 55 11.0
150.0 ± 10% GLA15110 8 20 0.796 50 15.0
180.0 ± 10% GLA18110 7 20 0.796 50 17.0
220.0 ± 10% GLA22110 7 20 0.796 45 21.0
†
Inductance values from 1.0 µH and up also available with ±5% inductance tolerance. Consult factory regarding these special units.
* Rerated 12/91 **Rerated 6/97
Inductance Standard SRF Q/ L Test Rated DCR
L Inductance Model (MHz) Q Freq. Current (Ω)
(µH) Tolerance No. min min (MHz) (mA) max
1.0 ± 20% GLAC1R020 100 7 7.96 500 0.09
1.5 ± 20% GLAC1R520 80 7 7.96 390 0.10
2.2 ± 20% GLAC2R220 65 7 7.96 350 0.13
3.3 ± 20% GLAC3R320 50 7 7.96 270 0.16
4.7 ± 20% GLAC4R720 46 7 7.96 240 0.18
6.8 ± 20% GLAC6R820 36 7 7.96 200 0.25
10.0 ± 10% GLAC10010 29 10 2.52 160 0.34
15.0 ± 10% GLAC15010 25 10 2.52 145 0.42
22.0 ± 10% GLAC22010 18 10 2.52 115 0.65
33.0 ± 10% GLAC33010 16 10 2.52 95 0.91
47.0 ± 10% GLAC47010 13 10 2.52 80 1.30
68.0 ± 10% GLAC68010 10 10 2.52 60 1.95
100.0 ± 10% GLAC10110 8 20 0.796 50 3.12
150.0 ± 10% GLAC15110 7 20 0.796 45 4.03
220.0 ± 10% GLAC22110 5 20 0.796 35 7.15
330.0 ± 10% GLAC33110 4 20 0.796 30 9.23
GLAC SERIES — HIGH POWER LOW DCR SHIELDED MOLDED BOBBIN WOUND 1210 SIZE
Carrier and reel specifications on page 12.
0.098 ± 0.008
2.5 ± 0.2 0.075 ± 0.004
1.9 ± 0.1
0.126 ± 0.012
3.2 ± 0.3
MARKING (inductance & tolerance)
0.087 ± 0.008
2.2 ± 0.2
0.024 ± 0.008
0.6 ± 0.2 TYP
TERMINALS APPROX. FLUSH
TO MOUNTING SURFACE
PAD LAYOUT
0.063 ± 0.008
1.6 ± 0.2 0.067 ± 0.004
1.7 ± 0.1
0.083 ± 0.008
2.1 ± 0.2
TYP
GLA, GLAC, GLC and GLD
Series Outline Drawing
All dimensions are in/mm.
SURFCOIL®SMT INDUCTORS SG-800H
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WES TBU RY, NY 11590 • TEL: 516- 334-8700 • F AX: 516- 334-8771 • E-MAIL: info@spraguegoodman.com
7
GLC SERIES — SHIELDED MOLDED BOBBIN WOUND 1210 SIZE
Standard Inductance SRF Q Test Rated DCR
Inductance Inductance Test Freq. Model (MHz) Q Frequency Current (Ω)
L (µH) Tolerance (MHz) No. min min (MHz) (mA) max
10.0 ± 10% 1.0 GLC10010 30 40 5.0 18 1.8
12.0 ± 10% 1.0 GLC12010 28 40 5.0 17 2.0
15.0 ± 10% 1.0 GLC15010 25 40 5.0 15 2.2
18.0 ± 10% 1.0 GLC18010 23 40 5.0 13 2.5
22.0 ± 10% 1.0 GLC22010 20 40 5.0 12 2.8
27.0 ± 10% 1.0 GLC27010 18 40 5.0 10 3.2
33.0 ± 10% 1.0 GLC33010 17 40 5.0 10 3.5
39.0 ± 10% 1.0 GLC39010 15 40 5.0 9 3.8
47.0 ± 10% 1.0 GLC47010 14 40 5.0 8 4.0
56.0 ± 10% 1.0 GLC56010 13 40 5.0 7 4.5
68.0 ± 10% 1.0 GLC68010 12 40 1.5 6 5.0
82.0 ± 10% 1.0 GLC82010 11 40 1.5 6 6.0
100.0 ± 10% 1.0 GLC10110 10 40 1.5 5 7.0
120.0 ± 10% 1.0 GLC12110 9 40 1.5 5 8.0
150.0 ± 10% 0.1 GLC15110 5 40 1.5 5 9.0
180.0 ± 10% 0.1 GLC18110 5 40 1.5 5 11.0
220.0 ± 10% 0.1 GLC22110 4 40 1.5 5 12.0
270.0 ± 10% 0.1 GLC27110 4 40 1.5 5 14.0
Carrier and reel specifications on page 12.
GLA SERIES — NONMAGNETIC HIGH FREQUENCY MOLDED BOBBIN WOUND 1210 SIZE
Standard Inductance SRF Q Test Rated DCR
Inductance Inductance Test Freq. Model (MHz) Q Frequency Current (Ω)
L (µH) Tolerance (MHz) No. min min (MHz) (mA) max
0.047 ± 20% 100.0 GLA47N20 680 10 100.0 450 0.20
0.056 ± 20% 100.0 GLA56N20 600 10 100.0 420 0.22
0.068 ± 20% 100.0 GLA68N20 540 10 100.0 400 0.25
0.082 ± 20% 100.0 GLA82N20 500 10 100.0 380 0.27
0.10 ± 20% 100.0 GLAR1020 450 10 100.0 360 0.30
0.12 ± 20% 25.2 GLAR1220 400 10 25.2 240 0.67
0.15 ± 20% 25.2 GLAR1520 350 10 25.2 230 0.72
0.18 ± 20% 25.2 GLAR1820 320 10 25.2 220 0.81
0.22 ± 10% 1.0 GLAR2210 280 10 25.2 210 0.90
0.27 ± 10% 1.0 GLAR2710 250 10 25.2 200 1.0
0.33 ± 10% 1.0 GLAR3310 220 10 25.2 190 1.1
0.39 ± 10% 1.0 GLAR3910 200 10 25.2 180 1.2
0.47 ± 10% 1.0 GLAR4710 180 10 25.2 175 1.4
0.56 ± 10% 1.0 GLAR5610 160 10 25.2 170 1.5
0.68 ± 10% 1.0 GLAR6810 150 10 25.2 155 1.7
0.82 ± 10% 1.0 GLAR8210 135 10 25.2 145 1.9
1.00 ± 5% 1.0 GLA1R005 120 13 7.96 125 2.1
1.20 ± 5% 1.0 GLA1R205 110 13 7.96 120 2.3
1.50 ± 5% 1.0 GLA1R505 95 13 7.96 115 2.7
1.80 ± 5% 1.0 GLA1R805 85 13 7.96 110 3.0
2.20 ± 5% 1.0 GLA2R205 80 13 7.96 110 3.2
2.70 ± 5% 1.0 GLA2R705 70 13 7.96 105 3.6
3.30 ± 5% 1.0 GLA3R305 62 13 7.96 100 4.2
3.90 ± 5% 1.0 GLA3R905 57 13 7.96 95 4.4
4.70 ± 5% 1.0 GLA4R705 52 13 7.96 70 7.7
5.60 ± 5% 1.0 GLA5R605 46 13 7.96 65 8.7
6.80 ± 5% 1.0 GLA6R805 42 13 7.96 60 10.0
8.20 ± 5% 1.0 GLA8R205 38 13 7.96 60 11.0
SURFCOIL®SMT INDUCTORS SG-800H
8
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WES TBU RY, NY 11590 • TEL: 516- 334-8700 • F AX: 516- 334-8771 • E-MAIL: info@spraguegoodman.com
GLBP SERIES — HIGH CURRENT LOW DCR SHIELDED
MOLDED BOBBIN WOUND 1812 SIZE
Carrier and reel specifications on page 12.
0.126 ± 0.008
3.2 ± 0.2 0.079 ± 0.008
2.0 ± 0.2
0.177 ± 0.012
4.5 ± 0.3
MARKING (inductance & tolerance)
0.063 ± 0.008
1.6 ± 0.2
0.118 ± 0.004
3.0 ± 0.1
0.087 ± 0.008
2.2 ± 0.2
PAD LAYOUT
0.126 ± 0.008
3.2 ± 0.2
0.024 ± 0.008
0.6 ± 0.2 TYP
TERMINALS APPROX. FLUSH
TO MOUNTING SURFACE
GLB AND GLBP Series Outline Drawing
All dimensions are in/mm.
GLD SERIES — HIGH CURRENT SHIELDED MOLDED BOBBIN WOUND 1210 SIZE
0.098 ± 0.008
2.5 ± 0.2 0.075 ± 0.004
1.9 ± 0.1
0.126 ± 0.012
3.2 ± 0.3
MARKING (inductance & tolerance)
0.087 ± 0.008
2.2 ± 0.2
0.024 ± 0.008
0.6 ± 0.2 TYP
TERMINALS APPROX. FLUSH
TO MOUNTING SURFACE
PAD LAYOUT
0.063 ± 0.008
1.6 ± 0.2 0.067 ± 0.004
1.7 ± 0.1
0.083 ± 0.008
2.1 ± 0.2
TYP
GLA, GLAC, GLC and GLD
Series Outline Drawing
All dimensions are in/mm.
Induct- Standard SRF Q/ L Test Rated DCR
ance Inductance Model (MHz) Q Freq. Current (Ω)
L (µH) Tolerance No. min min (MHz) (mA) max
10.0 ± 10% GLBP10010 19 10 2.52 360 0.65
12.0 ± 10% GLBP12010 17 10 2.52 340 0.70
15.0 ± 10% GLBP15010 15 10 2.52 320 0.80
18.0 ± 10% GLBP18010 14 10 2.52 310 0.90
22.0 ± 10% GLBP22010 13 10 2.52 300 1.00
27.0 ± 10% GLBP27010 11 10 2.52 270 1.20
33.0 ± 10% GLBP33010 10 10 2.52 250 1.40
39.0 ± 10% GLBP39010 9.5 10 2.52 230 1.60
47.0 ± 10% GLBP47010 8.5 10 2.52 210 1.90
56.0 ± 10% GLBP56010 8.0 10 2.52 190 2.20
68.0 ± 10% GLBP68010 7.0 10 2.52 170 2.60
82.0 ± 10% GLBP82010 6.5 10 2.52 160 3.50
100.0 ± 10% GLBP10110 6.0 20 0.796 150 4.00
120.0 ± 10% GLBP12110 5.5 20 0.796 130 4.50
150.0 ± 10% GLBP15110 5.0 20 0.796 120 6.50
180.0 ± 10% GLBP18110 4.5 20 0.796 110 7.50
220.0 ± 10% GLBP22110 4.0 20 0.796 90 9.00
Induct- Standard SRF Q/ L Test Rated DCR
ance Inductance Model (MHz) Q Freq. Current (Ω)
L (µH) Tolerance No. min min (MHz) (mA) max
1.0 ± 20% GLD1R020 150 7 7.96 600 0.15
1.5 ± 20% GLD1R520 110 7 7.96 550 0.18
2.2 ± 20% GLD2R220 80 7 7.96 500 0.23
3.3 ± 20% GLD3R320 58 7 7.96 400 0.28
4.7 ± 20% GLD4R720 46 7 7.96 350 0.34
6.8 ± 20% GLD6R820 38 7 7.96 300 0.42
10.0 ± 10% GLD10010 23 15 2.52 240 0.50
12.0 ± 10% GLD12010 21 15 2.52 230 0.60
15.0 ± 10% GLD15010 18 15 2.52 220 0.74
18.0 ± 10% GLD18010 17 15 2.52 205 0.90
22.0 ± 10% GLD22010 15 15 2.52 185 1.15
27.0 ± 10% GLD27010 13 15 2.52 165 1.45
33.0 ± 10% GLD33010 12 15 2.52 155 1.65
39.0 ± 10% GLD39010 11 15 2.52 145 1.90
47.0 ± 10% GLD47010 9.5 15 2.52 135 2.25
56.0 ± 10% GLD56010 8.5 15 2.52 110 3.30
68.0 ± 10% GLD68010 7.5 15 2.52 105 3.70
82.0 ± 10% GLD82010 7.0 15 2.52 100 4.20
100.0 ± 10% GLD10110 6.5 20 0.796 90 5.00
120.0 ± 10% GLD12110 6.0 20 0.796 75 7.00
150.0 ± 10% GLD15110 5.5 20 0.796 70 8.00
180.0 ± 10% GLD18110 5.0 20 0.796 65 9.50
220.0 ± 10% GLD22110 4.0 20 0.796 60 11.00
270.0 ± 10% GLD27110 3.5 20 0.796 55 14.50
330.0 ± 10% GLD33110 3.0 20 0.796 50 16.00
SURFCOIL®SMT INDUCTORS SG-800H
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WES TBU RY, NY 11590 • TEL: 516- 334-8700 • F AX: 516- 334-8771 • E-MAIL: info@spraguegoodman.com
9
Standard Inductance SRF Q Test Rated DCR
Inductance Inductance Test Freq. Model (MHz) Q Frequency Current (Ω)
L (µH) Tolerance* (MHz) No. min min (MHz) (mA) max
0.22 ± 20% 1.0 GLBR2220 230 30 25.20 700 0.30
0.27 ± 20% 1.0 GLBR2720 200 30 25.20 650 0.32
0.33 ± 20% 1.0 GLBR3320 180 30 25.20 630 0.35
0.39 ± 20% 1.0 GLBR3920 155 30 25.20 620 0.37
0.47 ± 20% 1.0 GLBR4720 135 30 25.20 580 0.40
0.56 ± 20% 1.0 GLBR5620 120 30 25.20 560 0.42
0.68 ± 20% 1.0 GLBR6820 105 30 25.20 530 0.48
0.82 ± 20% 1.0 GLBR8220 90 30 25.20 500 0.50
1.00 ± 20% 1.0 GLB1R020 80 30 25.20 470 0.52
1.20 ± 20% 1.0 GLB1R220 70 30 25.20 460 0.55
1.50 ± 20% 1.0 GLB1R520 60 30 25.20 430 0.61
1.80 ± 20% 1.0 GLB1R820 50 30 7.96 410 0.61
2.20 ± 20% 1.0 GLB2R220 45 50 7.96 410 0.61
2.70 ± 20% 1.0 GLB2R720 43 50 7.96 400 0.61
3.30 ± 20% 1.0 GLB3R320 39 50 7.96 380 0.66
3.90 ± 20% 1.0 GLB3R920 36 50 7.96 360 0.74
4.70 ± 20% 1.0 GLB4R720 33 50 5.00 350 0.81
5.60 ± 20% 1.0 GLB5R620 30 50 5.00 330 0.88
6.80 ± 20% 1.0 GLB6R820 26 50 5.00 310 1.00
8.20 ± 20% 1.0 GLB8R220 24 50 5.00 250 1.60
10.0 ± 10% 1.0 GLB10010 22 50 5.00 235 1.8
12.0 ± 10% 1.0 GLB12010 20 50 5.00 225 1.9
15.0 ± 10% 1.0 GLB15010 18 50 5.00 215 2.1
18.0 ± 10% 1.0 GLB18010 16 50 2.52 205 2.3
22.0 ± 10% 1.0 GLB22010 15 50 2.52 195 2.6
27.0 ± 10% 1.0 GLB27010 13 50 2.52 185 2.9
33.0 ± 10% 1.0 GLB33010 12 50 2.52 175 3.1
39.0 ± 10% 1.0 GLB39010 10 50 2.52 165 3.6
47.0 ± 10% 1.0 GLB47010 9.7 50 2.52 130 4.2
56.0 ± 10% 0.1 GLB56010 9.0 40 2.52 125 4.7
68.0 ± 10% 0.1 GLB68010 8.2 40 2.52 115 5.3
82.0 ± 10% 0.1 GLB82010 7.5 40 2.52 110 5.9
100.0 ± 10% 0.1 GLB10110 6.7 40 2.52 105 8.8
120.0 ± 10% 0.1 GLB12110 6.1 40 1.50 100 10.0
150.0 ± 10% 0.1 GLB15110 5.5 40 1.50 95 11.0
180.0 ± 10% 0.1 GLB18110 5.1 40 1.50 85 13.0
220.0 ± 10% 0.1 GLB22110 4.5 40 0.796 85 13.0
270.0 ± 10% 0.1 GLB27110 4.1 40 0.796 80 14.0
330.0 ± 10% 0.1 GLB33110 3.7 40 0.796 75 16.0
390.0 ± 10% 0.1 GLB39110 3.3 40 0.796 70 19.0
470.0 ± 10% 0.1 GLB47110 3.3 30 0.796 55 31.0
560.0 ± 10% 0.1 GLB56110 2.7 30 0.796 50 35.0
680.0 ± 10% 0.1 GLB68110 2.5 30 0.796 50 39.0
820.0 ± 10% 0.1 GLB82110 2.4 30 0.796 45 45.0
1000.0 ± 10% 0.1 GLB10210 2.1 30 0.796 40 53.0
GLB SERIES — MOLDED BOBBIN WOUND 1812 SIZE
* Inductance values from 1.00 to 8.2 µH also available with ±10% inductance tolerance.
Inductance values from 10.0 µH and up also available with ±5% inductance tolerance.
Consult factory regarding these special units.
Carrier and reel specifications on page 12.
SURFCOIL®
SMT INDUCTORS SG-800H.1
10
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WES TBURY, NY 11590 • TEL: 516- 334-8700 • F AX: 516- 334-8771 • E-MAIL: info@spraguegoodman.com
GL06 SERIES — ECONOMY SURFCOIL®AIR CORE INDUCTORS
Induct- Standard Q/L Test
ance Inductance Model Q Frequency ID B L C D
L (nH) Tolerance* No. min (MHz) (in/ mm) (in/ mm) (in/ mm) (in/ mm) (in/ mm)
1.65 ± 10% GL06A01N6510 100 800 0.018/0.45 0.061/1.55 0.088/2.23 0.04/1.00 0.10/2.6
2.55 ± 10% GL06A02N5510 100 800 0.020/0.52 0.052/1.32 0.090/2.29 0.04/1.00 0.10/2.6
3.85 ± 10% GL06A03N8510 100 800 0.020/0.52 0.058/1.46 0.098/2.50 0.04/1.00 0.10/2.6
5.40 ± 5% GL06A05N4005 100 800 0.021/0.54 0.106/2.69 0.84/2.14 0.04/1.00 0.10/2.6
5.60 ± 5% GL06A05N6005 100 800 0.021/0.54 0.059/1.50 0.164/4.16 0.112/2.85 0.18/4.5
7.15 ± 5% GL06A07N1505 100 800 0.026/0.65 0.064/1.62 0.172/4.38 0.112/2.85 0.18/4.5
8.80 ± 5% GL06A08N8005 100 800 0.026/0.65 0.064/1.62 0.165/4.19 0.112/2.85 0.18/4.5
9.85 ± 5% GL06A09N8505 100 800 0.026/0.65 0.065/1.65 0.163/4.15 0.112/2.85 0.18/4.5
12.55 ± 5% GL06A12N5505 100 800 0.030/0.7 0.061/1.55 0.163/4.15 0.112/2.85 0.18/4.5
GL12 SERIES — ECONOMY SURFCOIL®AIR CORE INDUCTORS
Induct- Standard Q/L Test
ance Inductance Model Q Frequency ID B L C D
L (nH) Tolerance* No. min (MHz) (in/mm) (in/mm) (in/mm) (in/mm) (in/mm)
2.5 ± 10% GL12A02N5010 100 150 0.053/1.35 0.091/2.3 0.11/2.9 0.065/1.65 0.17/4.2
5.0 ± 10% GL12A05N0010 100 150 0.053/1.35 0.082/2.1 0.135/3.45 0.065/1.65 0.17/4.2
8.0 ± 10% GL12A08N0010 100 150 0.061/1.55 0.10/2.6 0.15/3.7 0.065/1.65 0.17/4.2
12.5 ± 10% GL12A12N5010 100 150 0.060/1.53 0.11/2.7 0.2/4 0.065/1.65 0.17/4.2
18.5 ± 10% GL12A18N5010 100 150 0.061/1.55 0.10/2.6 0.135/3.45 0.065/1.65 0.17/4.2
17.5 ± 10% GL12A17N5010 100 150 0.061/1.55 0.11/2.7 0.25/6.4 0.19/4.7 0.29/7.3
22.5 ± 5% GL12A22N5005 100 150 0.061/1.55 0.11/2.7 0.27/6.8 0.19/4.7 0.29/7.3
28.0 ± 5% GL12A28N0005 100 150 0.061/1.55 0.11/2.7 0.26/6.6 0.19/4.7 0.29/7.3
35.5 ± 5% GL12A35N5005 100 150 0.061/1.55 0.11/2.8 0.24/6.2 0.19/4.7 0.29/7.3
43.0 ± 5% GL12A43N0005 100 150 0.061/1.55 0.11/2.8 0.26/6.6 0.19/4.7 0.29/7.3
ENCAPSULATION
(FLAT SURFACE FOR
EASE OF PICK & PLACE)
TIN
PLATE
L
ID B
0.051
1.3
D
C
PAD LAYOUT
0.13
3.3
TYP
0.11
2.8
176° ±4°
GL12 Series Outline Drawing
All dimensions are in/mm.
ENCAPSULATION
(FLAT SURFACE FOR
EASE OF PICK & PLACE)
TIN
PLATE
L
ID B
0.03
0.8
D
C
PAD LAYOUT
0.098
2.5
TYP
0.04
1.0
176° ±4°
GL06 Series Outline Drawing
All dimensions are in/mm.
*Tighter tolerances are available, consult factory.
*Tighter tolerances are available, consult factory.
Carrier and reel specifications are on the web at www.spraguegoodman.com/800/800p1/html
SURFCOIL®
SMT INDUCTORS SG-800H.1
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WES TBURY, NY 11590 • TEL: 516- 334-8700 • F AX: 516- 334-8771 • E-MAIL: info@spraguegoodman.com
11
GL15 SERIES — ECONOMY SURFCOIL®AIR CORE INDUCTORS
Inductance Standard Q/L Test
L Inductance Model Q Frequency ID B L
(nH) Tolerance* No. min (MHz) (in/mm) (in/mm) (in/mm)
22.0 150 GL15A22N0005 100 150 0.096/2.45 0.1/3 0.2/5
27.0 150 GL15A27N0005 100 150 0.08/2.2 0.1/3 0.18/4.5
33.0 150 GL15A33N0005 100 150 0.096/2.45 0.1/3 0.21/5.3
39.0 150 GL15A39N0005 100 150 0.087/2.2 0.1/3 0.19/4.9
47.0 150 GL15A47N0005 100 150 0.098/2.5 0.11/2.8 0.19/4.8
56.0 150 GL15A56N0005 100 150 0.091/2.3 0.12/3.1 0.12/4.7
68.0 150 GL15A68N0005 100 150 0.100/2.55 0.11/2.8 0.17/4.4
82.0 150 GL15A82N0005 100 150 0.098/2.5 0.12/3.1 0.18/4.5
100.0 150 GL15AR100005 100 150 0.096/2.45 0.1/3 0.18/4.6
120.0 150 GL15AR120005 100 150 0.11/2.8 0.1/3 0.18/4.6
GL25 SERIES — ECONOMY SURFCOIL®AIR CORE INDUCTORS
Inductance Standard Q/L Test
L Inductance Model Q Frequency ID B L
(nH) Tolerance* No. min (MHz) (in/mm) (in/mm) (in/mm)
90.0 50 GL25A90N0005 90 50 0.12/3.05 0.1/3 0.35/8.8
111.0 50 GL25AR111005 90 50 0.12/3.05 0.1/3 0.35/8.8
130.0 50 GL25AR130005 90 50 0.12/3.05 0.11/2.9 0.34/8.6
150.0 50 GL25AR150005 90 50 0.128/3.25 0.1/3 0.33/8.4
169.0 50 GL25AR169005 90 50 0.128/3.25 0.1/3 0.33/8.4
206.0 50 GL25AR206005 90 50 0.128/3.25 0.1/3 0.3/8
222.0 50 GL25AR222005 90 50 0.128/3.25 0.13/3.3 0.33/8.5
246.0 50 GL25AR246005 90 50 0.128/3.25 0.14/3.5 0.4/9
307.0 50 GL25AR307005 90 50 0.13/3.4 0.13/3.3 0.34/8.6
380.0 50 GL25AR380005 90 50 0.14/3.5 0.12/3.1 0.33/8.4
422.0 50 GL25AR422005 90 50 0.14/3.6 0.12/3.1 0.33/8.5
491.0 50 GL25AR491005 90 50 0.14/3.6 0.124/3.15 0.33/8.5
538.0 50 GL25AR538005 90 50 0.144/0.365 0.1/3 0.34/8.6
ENCAPSULATION
(FLAT SURFACE FOR
EASE OF PICK & PLACE)
TIN
PLATE
L
ID B
0.08
2
PAD LAYOUT
0.19
4.7
0.91
2.3
176° ±4°
0.2
6
0.39
10
GL25 Series Outline Drawing
ENCAPSULATION
(FLAT SURFACE FOR
EASE OF PICK & PLACE)
TIN
PLATE
L
ID B
0.059
1.5
PAD LAYOUT
0.20
5.2
TYP
0.10
2.6
176° ±4°
0.11
2.8
0.23
5.8
GL15 Series Outline Drawing
All dimensions are in/mm.
All dimensions are in/mm.
Carrier and reel specifications are on the web at www.spraguegoodman.com/800/800p1/html
*Tighter tolerances are available, consult factory.
*Tighter tolerances are available, consult factory.
C
D
E
B
A
T
W
Dimension A B C D E T W
Model Tolerance
Series
GLA
, GLAC
, GLC,
GLD,
GLU, GLW
GL X, GLY, GLYC
GLB, GLBP
GLZ, GLZB, GLZP
Dimension A B C D E F G H K L M N
Model Tolerance
Series
GL A, GLAC, GLC, GLD
GLB, GLBP
GLU, GLW
GLX
GLY, GLYC
GL Z, GLZB, GLZP
0.008 0.008 0.012 0.002 0.004 0.004 0.002 0.004 0.008 0.002 0.004 0.004
±
-—–—
±
-—–—
±
-—–—
±
-—–—
±
-—–—
±
-—–—
±
-—–—
±
-—–—
±
-—–—
±
-—–—
+
-—–—
±
-—–—
0.2 0.2 0.3 0.05 0.1 0.1 0.05 0.1 0.2 0.05 0.1 0.1
- 0
0.11 0.14 0.31 0.14 0.069 0.16 0.079 0.16 0.091 0.01 0.059
-—–— -—–— -—–— -—–— -——–— -—–— -—––— -—––— -—––— -—–— -—–––––—
—
2.8 3.6 8.0 3.5 1.75 4.0 2.0 4.0 2.3 0.3 1.5
0.14 0.19 0.472 0.22 0.069 0.31 0.079 0.16 0.13 0.01 0.059
-——– -—–— -—–—— -—–––— -——–— -—––––– -——––– -—––––— -—––––– -—–— -—––––—
—
3.6 4.9 12.0 5.5 1.75 8.0 2.0 4.0 3.4 0.3 1.5
0.095 0.11 0.31 0.14 0.069 0.16 0.079 0.16 0.073 0.01 0.059 0.043
-—–––——––––—––––—–––——–––––— -——–– -——–––– -—–— -—––––— -—–— -—––––— -—––––—
2.4 2.9 8.0 3.5 1.75 4.0 2.0 4.0 1.85 0.3 1.5 1.1
0.057 0.089 0.31 0.14 0.069 0.16 0.079 0.16 0.055 0.0098 0.059 0.043
-——–––– -——–––– -—— -—— -—––––— -—— -——–––– -—— -—––––— -—–––—— -—––––— -—––––—
1.45 2.25 8.0 3.5 1.75 4.0 2.0 4.0 1.4 0.25 1.5 1.1
0.039 0.071 0.31 0.14 0.069 0.16 0.079 0.16 0.039 0.0098 0.059
-——–––– -—––––— -—— -—— -—––––— -—— -—––––— -—— -—––––— -——–––— -—––––—
—
1.0 1.8 8.0 3.5 1.75 4.0 2.0 4.0 1.0 0.25 1.5
0.028 0.048 0.31 0.14 0.069 0.16 0.079 0.16
-——–––– -—––––— -—— -—— -—––––— -—— -—––––— -——
————
0.71 1.21 8.0 3.5 1.75 4.0 2.0 4.0
CARRIER SPECIFICATIONS
SURFCOIL®SMT INDUCTORS SG-800H
12
0.079 0.02 0.02 0.03 0.02 0.02 0.01
—
±-
—––––—
±-
—––—
±-
—–—
±-
—–—
±-
—–—
±-
—–—
±-
—–—
2.0 0.5 0.5 0.8 0.5 0.5 0.3
7.01 2.4 0.51 0.83 0.079 0.043 0.35
2,000
-
—–—
-
——
-
——
-
—–—
-
—––––—
-
—––––—
-
—––—
178 60 13 21 2.0 1.1 9.0
7.01 2.4 0.51 0.83 0.079 0.043 0.35
3,000
-
——–
-
——
-
——
-
——–
-
—––––—
-
—–––—–
-
—–—
178 60 13 21 2.0 1.1 9.0
7.01 2.4 0.51 0.83 0.079 0.043 0.51
500
-
—–—
-
——
-
—–—
-
—–—
-
—––––—
-
———
-
——
178 60 13 21 2.0 1.1 13
7.01 2.4 0.51 0.83 0.079 0.043 0.35
10,000
-
——–
-
——
-
——
-
——–
-
—––––—
-
—–––—–
-
—–—
178 60 13 21 2.0 1.1 9.0
REEL SPECIFICATIONS
Qty
COVER
TAPE
E
C
D
HG
B
M
A
F
K
N
L
All dimensions are in/mm.
Not to scale.
©2005 SPRAGUE-GOODMAN ELECTRONICS, INC., ALL RIGHTS RESERVED. PRINTED IN U.S.A. 2.50501
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WES TBU RY, NY 11590 • TEL: 516- 334-8700 • F AX: 516- 334-8771 • E-MAIL: info@spraguegoodman.com
Reel Outline Drawing
Carrier
Outline Drawing
All dimensions are in/mm.
Not to scale.
